mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 03:40:25 +07:00
e68f31f452
This adds support for the Marvell Tauros3 cache controller which is compatible with pl310 cache controller but broadcasts L1 cache operations to L2 cache. While updating the binding documentation, clean up the list of possible compatibles. Also reorder driver compatibles to allow non-ARM derivated to be compatible to ARM cache controller compatibles. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
1013 lines
26 KiB
C
1013 lines
26 KiB
C
/*
|
|
* arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support
|
|
*
|
|
* Copyright (C) 2007 ARM Limited
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include "cache-tauros3.h"
|
|
#include "cache-aurora-l2.h"
|
|
|
|
#define CACHE_LINE_SIZE 32
|
|
|
|
static void __iomem *l2x0_base;
|
|
static DEFINE_RAW_SPINLOCK(l2x0_lock);
|
|
static u32 l2x0_way_mask; /* Bitmask of active ways */
|
|
static u32 l2x0_size;
|
|
static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
|
|
|
|
/* Aurora don't have the cache ID register available, so we have to
|
|
* pass it though the device tree */
|
|
static u32 cache_id_part_number_from_dt;
|
|
|
|
struct l2x0_regs l2x0_saved_regs;
|
|
|
|
struct l2x0_of_data {
|
|
void (*setup)(const struct device_node *, u32 *, u32 *);
|
|
void (*save)(void);
|
|
struct outer_cache_fns outer_cache;
|
|
};
|
|
|
|
static bool of_init = false;
|
|
|
|
static inline void cache_wait_way(void __iomem *reg, unsigned long mask)
|
|
{
|
|
/* wait for cache operation by line or way to complete */
|
|
while (readl_relaxed(reg) & mask)
|
|
cpu_relax();
|
|
}
|
|
|
|
#ifdef CONFIG_CACHE_PL310
|
|
static inline void cache_wait(void __iomem *reg, unsigned long mask)
|
|
{
|
|
/* cache operations by line are atomic on PL310 */
|
|
}
|
|
#else
|
|
#define cache_wait cache_wait_way
|
|
#endif
|
|
|
|
static inline void cache_sync(void)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
|
|
writel_relaxed(0, base + sync_reg_offset);
|
|
cache_wait(base + L2X0_CACHE_SYNC, 1);
|
|
}
|
|
|
|
static inline void l2x0_clean_line(unsigned long addr)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
|
|
writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
|
|
}
|
|
|
|
static inline void l2x0_inv_line(unsigned long addr)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
cache_wait(base + L2X0_INV_LINE_PA, 1);
|
|
writel_relaxed(addr, base + L2X0_INV_LINE_PA);
|
|
}
|
|
|
|
#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
|
|
static inline void debug_writel(unsigned long val)
|
|
{
|
|
if (outer_cache.set_debug)
|
|
outer_cache.set_debug(val);
|
|
}
|
|
|
|
static void pl310_set_debug(unsigned long val)
|
|
{
|
|
writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
|
|
}
|
|
#else
|
|
/* Optimised out for non-errata case */
|
|
static inline void debug_writel(unsigned long val)
|
|
{
|
|
}
|
|
|
|
#define pl310_set_debug NULL
|
|
#endif
|
|
|
|
#ifdef CONFIG_PL310_ERRATA_588369
|
|
static inline void l2x0_flush_line(unsigned long addr)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
|
|
/* Clean by PA followed by Invalidate by PA */
|
|
cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
|
|
writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
|
|
cache_wait(base + L2X0_INV_LINE_PA, 1);
|
|
writel_relaxed(addr, base + L2X0_INV_LINE_PA);
|
|
}
|
|
#else
|
|
|
|
static inline void l2x0_flush_line(unsigned long addr)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
|
|
writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA);
|
|
}
|
|
#endif
|
|
|
|
static void l2x0_cache_sync(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
cache_sync();
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void __l2x0_flush_all(void)
|
|
{
|
|
debug_writel(0x03);
|
|
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
|
|
cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
|
|
cache_sync();
|
|
debug_writel(0x00);
|
|
}
|
|
|
|
static void l2x0_flush_all(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/* clean all ways */
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
__l2x0_flush_all();
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void l2x0_clean_all(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/* clean all ways */
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY);
|
|
cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask);
|
|
cache_sync();
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void l2x0_inv_all(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/* invalidate all ways */
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
/* Invalidating when L2 is enabled is a nono */
|
|
BUG_ON(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN);
|
|
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
|
|
cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
|
|
cache_sync();
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void l2x0_inv_range(unsigned long start, unsigned long end)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
if (start & (CACHE_LINE_SIZE - 1)) {
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
debug_writel(0x03);
|
|
l2x0_flush_line(start);
|
|
debug_writel(0x00);
|
|
start += CACHE_LINE_SIZE;
|
|
}
|
|
|
|
if (end & (CACHE_LINE_SIZE - 1)) {
|
|
end &= ~(CACHE_LINE_SIZE - 1);
|
|
debug_writel(0x03);
|
|
l2x0_flush_line(end);
|
|
debug_writel(0x00);
|
|
}
|
|
|
|
while (start < end) {
|
|
unsigned long blk_end = start + min(end - start, 4096UL);
|
|
|
|
while (start < blk_end) {
|
|
l2x0_inv_line(start);
|
|
start += CACHE_LINE_SIZE;
|
|
}
|
|
|
|
if (blk_end < end) {
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
}
|
|
}
|
|
cache_wait(base + L2X0_INV_LINE_PA, 1);
|
|
cache_sync();
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void l2x0_clean_range(unsigned long start, unsigned long end)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
unsigned long flags;
|
|
|
|
if ((end - start) >= l2x0_size) {
|
|
l2x0_clean_all();
|
|
return;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
while (start < end) {
|
|
unsigned long blk_end = start + min(end - start, 4096UL);
|
|
|
|
while (start < blk_end) {
|
|
l2x0_clean_line(start);
|
|
start += CACHE_LINE_SIZE;
|
|
}
|
|
|
|
if (blk_end < end) {
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
}
|
|
}
|
|
cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
|
|
cache_sync();
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void l2x0_flush_range(unsigned long start, unsigned long end)
|
|
{
|
|
void __iomem *base = l2x0_base;
|
|
unsigned long flags;
|
|
|
|
if ((end - start) >= l2x0_size) {
|
|
l2x0_flush_all();
|
|
return;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
while (start < end) {
|
|
unsigned long blk_end = start + min(end - start, 4096UL);
|
|
|
|
debug_writel(0x03);
|
|
while (start < blk_end) {
|
|
l2x0_flush_line(start);
|
|
start += CACHE_LINE_SIZE;
|
|
}
|
|
debug_writel(0x00);
|
|
|
|
if (blk_end < end) {
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
}
|
|
}
|
|
cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
|
|
cache_sync();
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void l2x0_disable(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
__l2x0_flush_all();
|
|
writel_relaxed(0, l2x0_base + L2X0_CTRL);
|
|
dsb(st);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
}
|
|
|
|
static void l2x0_unlock(u32 cache_id)
|
|
{
|
|
int lockregs;
|
|
int i;
|
|
|
|
switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
|
|
case L2X0_CACHE_ID_PART_L310:
|
|
lockregs = 8;
|
|
break;
|
|
case AURORA_CACHE_ID:
|
|
lockregs = 4;
|
|
break;
|
|
default:
|
|
/* L210 and unknown types */
|
|
lockregs = 1;
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < lockregs; i++) {
|
|
writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
|
|
i * L2X0_LOCKDOWN_STRIDE);
|
|
writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
|
|
i * L2X0_LOCKDOWN_STRIDE);
|
|
}
|
|
}
|
|
|
|
void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
|
|
{
|
|
u32 aux;
|
|
u32 cache_id;
|
|
u32 way_size = 0;
|
|
int ways;
|
|
int way_size_shift = L2X0_WAY_SIZE_SHIFT;
|
|
const char *type;
|
|
|
|
l2x0_base = base;
|
|
if (cache_id_part_number_from_dt)
|
|
cache_id = cache_id_part_number_from_dt;
|
|
else
|
|
cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
|
|
aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
|
|
|
|
aux &= aux_mask;
|
|
aux |= aux_val;
|
|
|
|
/* Determine the number of ways */
|
|
switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
|
|
case L2X0_CACHE_ID_PART_L310:
|
|
if (aux & (1 << 16))
|
|
ways = 16;
|
|
else
|
|
ways = 8;
|
|
type = "L310";
|
|
#ifdef CONFIG_PL310_ERRATA_753970
|
|
/* Unmapped register. */
|
|
sync_reg_offset = L2X0_DUMMY_REG;
|
|
#endif
|
|
if ((cache_id & L2X0_CACHE_ID_RTL_MASK) <= L2X0_CACHE_ID_RTL_R3P0)
|
|
outer_cache.set_debug = pl310_set_debug;
|
|
break;
|
|
case L2X0_CACHE_ID_PART_L210:
|
|
ways = (aux >> 13) & 0xf;
|
|
type = "L210";
|
|
break;
|
|
|
|
case AURORA_CACHE_ID:
|
|
sync_reg_offset = AURORA_SYNC_REG;
|
|
ways = (aux >> 13) & 0xf;
|
|
ways = 2 << ((ways + 1) >> 2);
|
|
way_size_shift = AURORA_WAY_SIZE_SHIFT;
|
|
type = "Aurora";
|
|
break;
|
|
default:
|
|
/* Assume unknown chips have 8 ways */
|
|
ways = 8;
|
|
type = "L2x0 series";
|
|
break;
|
|
}
|
|
|
|
l2x0_way_mask = (1 << ways) - 1;
|
|
|
|
/*
|
|
* L2 cache Size = Way size * Number of ways
|
|
*/
|
|
way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
|
|
way_size = 1 << (way_size + way_size_shift);
|
|
|
|
l2x0_size = ways * way_size * SZ_1K;
|
|
|
|
/*
|
|
* Check if l2x0 controller is already enabled.
|
|
* If you are booting from non-secure mode
|
|
* accessing the below registers will fault.
|
|
*/
|
|
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
|
|
/* Make sure that I&D is not locked down when starting */
|
|
l2x0_unlock(cache_id);
|
|
|
|
/* l2x0 controller is disabled */
|
|
writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
|
|
|
|
l2x0_inv_all();
|
|
|
|
/* enable L2X0 */
|
|
writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL);
|
|
}
|
|
|
|
/* Re-read it in case some bits are reserved. */
|
|
aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
|
|
|
|
/* Save the value for resuming. */
|
|
l2x0_saved_regs.aux_ctrl = aux;
|
|
|
|
if (!of_init) {
|
|
outer_cache.inv_range = l2x0_inv_range;
|
|
outer_cache.clean_range = l2x0_clean_range;
|
|
outer_cache.flush_range = l2x0_flush_range;
|
|
outer_cache.sync = l2x0_cache_sync;
|
|
outer_cache.flush_all = l2x0_flush_all;
|
|
outer_cache.inv_all = l2x0_inv_all;
|
|
outer_cache.disable = l2x0_disable;
|
|
}
|
|
|
|
pr_info("%s cache controller enabled\n", type);
|
|
pr_info("l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d kB\n",
|
|
ways, cache_id, aux, l2x0_size >> 10);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static int l2_wt_override;
|
|
|
|
/*
|
|
* Note that the end addresses passed to Linux primitives are
|
|
* noninclusive, while the hardware cache range operations use
|
|
* inclusive start and end addresses.
|
|
*/
|
|
static unsigned long calc_range_end(unsigned long start, unsigned long end)
|
|
{
|
|
/*
|
|
* Limit the number of cache lines processed at once,
|
|
* since cache range operations stall the CPU pipeline
|
|
* until completion.
|
|
*/
|
|
if (end > start + MAX_RANGE_SIZE)
|
|
end = start + MAX_RANGE_SIZE;
|
|
|
|
/*
|
|
* Cache range operations can't straddle a page boundary.
|
|
*/
|
|
if (end > PAGE_ALIGN(start+1))
|
|
end = PAGE_ALIGN(start+1);
|
|
|
|
return end;
|
|
}
|
|
|
|
/*
|
|
* Make sure 'start' and 'end' reference the same page, as L2 is PIPT
|
|
* and range operations only do a TLB lookup on the start address.
|
|
*/
|
|
static void aurora_pa_range(unsigned long start, unsigned long end,
|
|
unsigned long offset)
|
|
{
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&l2x0_lock, flags);
|
|
writel_relaxed(start, l2x0_base + AURORA_RANGE_BASE_ADDR_REG);
|
|
writel_relaxed(end, l2x0_base + offset);
|
|
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
|
|
|
|
cache_sync();
|
|
}
|
|
|
|
static void aurora_inv_range(unsigned long start, unsigned long end)
|
|
{
|
|
/*
|
|
* round start and end adresses up to cache line size
|
|
*/
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
end = ALIGN(end, CACHE_LINE_SIZE);
|
|
|
|
/*
|
|
* Invalidate all full cache lines between 'start' and 'end'.
|
|
*/
|
|
while (start < end) {
|
|
unsigned long range_end = calc_range_end(start, end);
|
|
aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
|
|
AURORA_INVAL_RANGE_REG);
|
|
start = range_end;
|
|
}
|
|
}
|
|
|
|
static void aurora_clean_range(unsigned long start, unsigned long end)
|
|
{
|
|
/*
|
|
* If L2 is forced to WT, the L2 will always be clean and we
|
|
* don't need to do anything here.
|
|
*/
|
|
if (!l2_wt_override) {
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
end = ALIGN(end, CACHE_LINE_SIZE);
|
|
while (start != end) {
|
|
unsigned long range_end = calc_range_end(start, end);
|
|
aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
|
|
AURORA_CLEAN_RANGE_REG);
|
|
start = range_end;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void aurora_flush_range(unsigned long start, unsigned long end)
|
|
{
|
|
start &= ~(CACHE_LINE_SIZE - 1);
|
|
end = ALIGN(end, CACHE_LINE_SIZE);
|
|
while (start != end) {
|
|
unsigned long range_end = calc_range_end(start, end);
|
|
/*
|
|
* If L2 is forced to WT, the L2 will always be clean and we
|
|
* just need to invalidate.
|
|
*/
|
|
if (l2_wt_override)
|
|
aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
|
|
AURORA_INVAL_RANGE_REG);
|
|
else
|
|
aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
|
|
AURORA_FLUSH_RANGE_REG);
|
|
start = range_end;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* For certain Broadcom SoCs, depending on the address range, different offsets
|
|
* need to be added to the address before passing it to L2 for
|
|
* invalidation/clean/flush
|
|
*
|
|
* Section Address Range Offset EMI
|
|
* 1 0x00000000 - 0x3FFFFFFF 0x80000000 VC
|
|
* 2 0x40000000 - 0xBFFFFFFF 0x40000000 SYS
|
|
* 3 0xC0000000 - 0xFFFFFFFF 0x80000000 VC
|
|
*
|
|
* When the start and end addresses have crossed two different sections, we
|
|
* need to break the L2 operation into two, each within its own section.
|
|
* For example, if we need to invalidate addresses starts at 0xBFFF0000 and
|
|
* ends at 0xC0001000, we need do invalidate 1) 0xBFFF0000 - 0xBFFFFFFF and 2)
|
|
* 0xC0000000 - 0xC0001000
|
|
*
|
|
* Note 1:
|
|
* By breaking a single L2 operation into two, we may potentially suffer some
|
|
* performance hit, but keep in mind the cross section case is very rare
|
|
*
|
|
* Note 2:
|
|
* We do not need to handle the case when the start address is in
|
|
* Section 1 and the end address is in Section 3, since it is not a valid use
|
|
* case
|
|
*
|
|
* Note 3:
|
|
* Section 1 in practical terms can no longer be used on rev A2. Because of
|
|
* that the code does not need to handle section 1 at all.
|
|
*
|
|
*/
|
|
#define BCM_SYS_EMI_START_ADDR 0x40000000UL
|
|
#define BCM_VC_EMI_SEC3_START_ADDR 0xC0000000UL
|
|
|
|
#define BCM_SYS_EMI_OFFSET 0x40000000UL
|
|
#define BCM_VC_EMI_OFFSET 0x80000000UL
|
|
|
|
static inline int bcm_addr_is_sys_emi(unsigned long addr)
|
|
{
|
|
return (addr >= BCM_SYS_EMI_START_ADDR) &&
|
|
(addr < BCM_VC_EMI_SEC3_START_ADDR);
|
|
}
|
|
|
|
static inline unsigned long bcm_l2_phys_addr(unsigned long addr)
|
|
{
|
|
if (bcm_addr_is_sys_emi(addr))
|
|
return addr + BCM_SYS_EMI_OFFSET;
|
|
else
|
|
return addr + BCM_VC_EMI_OFFSET;
|
|
}
|
|
|
|
static void bcm_inv_range(unsigned long start, unsigned long end)
|
|
{
|
|
unsigned long new_start, new_end;
|
|
|
|
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
|
|
|
|
if (unlikely(end <= start))
|
|
return;
|
|
|
|
new_start = bcm_l2_phys_addr(start);
|
|
new_end = bcm_l2_phys_addr(end);
|
|
|
|
/* normal case, no cross section between start and end */
|
|
if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
|
|
l2x0_inv_range(new_start, new_end);
|
|
return;
|
|
}
|
|
|
|
/* They cross sections, so it can only be a cross from section
|
|
* 2 to section 3
|
|
*/
|
|
l2x0_inv_range(new_start,
|
|
bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
|
|
l2x0_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
|
|
new_end);
|
|
}
|
|
|
|
static void bcm_clean_range(unsigned long start, unsigned long end)
|
|
{
|
|
unsigned long new_start, new_end;
|
|
|
|
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
|
|
|
|
if (unlikely(end <= start))
|
|
return;
|
|
|
|
if ((end - start) >= l2x0_size) {
|
|
l2x0_clean_all();
|
|
return;
|
|
}
|
|
|
|
new_start = bcm_l2_phys_addr(start);
|
|
new_end = bcm_l2_phys_addr(end);
|
|
|
|
/* normal case, no cross section between start and end */
|
|
if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
|
|
l2x0_clean_range(new_start, new_end);
|
|
return;
|
|
}
|
|
|
|
/* They cross sections, so it can only be a cross from section
|
|
* 2 to section 3
|
|
*/
|
|
l2x0_clean_range(new_start,
|
|
bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
|
|
l2x0_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
|
|
new_end);
|
|
}
|
|
|
|
static void bcm_flush_range(unsigned long start, unsigned long end)
|
|
{
|
|
unsigned long new_start, new_end;
|
|
|
|
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
|
|
|
|
if (unlikely(end <= start))
|
|
return;
|
|
|
|
if ((end - start) >= l2x0_size) {
|
|
l2x0_flush_all();
|
|
return;
|
|
}
|
|
|
|
new_start = bcm_l2_phys_addr(start);
|
|
new_end = bcm_l2_phys_addr(end);
|
|
|
|
/* normal case, no cross section between start and end */
|
|
if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
|
|
l2x0_flush_range(new_start, new_end);
|
|
return;
|
|
}
|
|
|
|
/* They cross sections, so it can only be a cross from section
|
|
* 2 to section 3
|
|
*/
|
|
l2x0_flush_range(new_start,
|
|
bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
|
|
l2x0_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
|
|
new_end);
|
|
}
|
|
|
|
static void __init l2x0_of_setup(const struct device_node *np,
|
|
u32 *aux_val, u32 *aux_mask)
|
|
{
|
|
u32 data[2] = { 0, 0 };
|
|
u32 tag = 0;
|
|
u32 dirty = 0;
|
|
u32 val = 0, mask = 0;
|
|
|
|
of_property_read_u32(np, "arm,tag-latency", &tag);
|
|
if (tag) {
|
|
mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
|
|
val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
|
|
}
|
|
|
|
of_property_read_u32_array(np, "arm,data-latency",
|
|
data, ARRAY_SIZE(data));
|
|
if (data[0] && data[1]) {
|
|
mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
|
|
L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
|
|
val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
|
|
((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
|
|
}
|
|
|
|
of_property_read_u32(np, "arm,dirty-latency", &dirty);
|
|
if (dirty) {
|
|
mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
|
|
val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
|
|
}
|
|
|
|
*aux_val &= ~mask;
|
|
*aux_val |= val;
|
|
*aux_mask &= ~mask;
|
|
}
|
|
|
|
static void __init pl310_of_setup(const struct device_node *np,
|
|
u32 *aux_val, u32 *aux_mask)
|
|
{
|
|
u32 data[3] = { 0, 0, 0 };
|
|
u32 tag[3] = { 0, 0, 0 };
|
|
u32 filter[2] = { 0, 0 };
|
|
|
|
of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
|
|
if (tag[0] && tag[1] && tag[2])
|
|
writel_relaxed(
|
|
((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
|
|
((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
|
|
((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
|
|
l2x0_base + L2X0_TAG_LATENCY_CTRL);
|
|
|
|
of_property_read_u32_array(np, "arm,data-latency",
|
|
data, ARRAY_SIZE(data));
|
|
if (data[0] && data[1] && data[2])
|
|
writel_relaxed(
|
|
((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
|
|
((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
|
|
((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
|
|
l2x0_base + L2X0_DATA_LATENCY_CTRL);
|
|
|
|
of_property_read_u32_array(np, "arm,filter-ranges",
|
|
filter, ARRAY_SIZE(filter));
|
|
if (filter[1]) {
|
|
writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
|
|
l2x0_base + L2X0_ADDR_FILTER_END);
|
|
writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN,
|
|
l2x0_base + L2X0_ADDR_FILTER_START);
|
|
}
|
|
}
|
|
|
|
static void __init pl310_save(void)
|
|
{
|
|
u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
|
|
L2X0_CACHE_ID_RTL_MASK;
|
|
|
|
l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base +
|
|
L2X0_TAG_LATENCY_CTRL);
|
|
l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base +
|
|
L2X0_DATA_LATENCY_CTRL);
|
|
l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base +
|
|
L2X0_ADDR_FILTER_END);
|
|
l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base +
|
|
L2X0_ADDR_FILTER_START);
|
|
|
|
if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) {
|
|
/*
|
|
* From r2p0, there is Prefetch offset/control register
|
|
*/
|
|
l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base +
|
|
L2X0_PREFETCH_CTRL);
|
|
/*
|
|
* From r3p0, there is Power control register
|
|
*/
|
|
if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0)
|
|
l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base +
|
|
L2X0_POWER_CTRL);
|
|
}
|
|
}
|
|
|
|
static void aurora_save(void)
|
|
{
|
|
l2x0_saved_regs.ctrl = readl_relaxed(l2x0_base + L2X0_CTRL);
|
|
l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
|
|
}
|
|
|
|
static void __init tauros3_save(void)
|
|
{
|
|
l2x0_saved_regs.aux2_ctrl =
|
|
readl_relaxed(l2x0_base + TAUROS3_AUX2_CTRL);
|
|
l2x0_saved_regs.prefetch_ctrl =
|
|
readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
|
|
}
|
|
|
|
static void l2x0_resume(void)
|
|
{
|
|
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
|
|
/* restore aux ctrl and enable l2 */
|
|
l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID));
|
|
|
|
writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base +
|
|
L2X0_AUX_CTRL);
|
|
|
|
l2x0_inv_all();
|
|
|
|
writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL);
|
|
}
|
|
}
|
|
|
|
static void pl310_resume(void)
|
|
{
|
|
u32 l2x0_revision;
|
|
|
|
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
|
|
/* restore pl310 setup */
|
|
writel_relaxed(l2x0_saved_regs.tag_latency,
|
|
l2x0_base + L2X0_TAG_LATENCY_CTRL);
|
|
writel_relaxed(l2x0_saved_regs.data_latency,
|
|
l2x0_base + L2X0_DATA_LATENCY_CTRL);
|
|
writel_relaxed(l2x0_saved_regs.filter_end,
|
|
l2x0_base + L2X0_ADDR_FILTER_END);
|
|
writel_relaxed(l2x0_saved_regs.filter_start,
|
|
l2x0_base + L2X0_ADDR_FILTER_START);
|
|
|
|
l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
|
|
L2X0_CACHE_ID_RTL_MASK;
|
|
|
|
if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) {
|
|
writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
|
|
l2x0_base + L2X0_PREFETCH_CTRL);
|
|
if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0)
|
|
writel_relaxed(l2x0_saved_regs.pwr_ctrl,
|
|
l2x0_base + L2X0_POWER_CTRL);
|
|
}
|
|
}
|
|
|
|
l2x0_resume();
|
|
}
|
|
|
|
static void aurora_resume(void)
|
|
{
|
|
if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
|
|
writel_relaxed(l2x0_saved_regs.aux_ctrl,
|
|
l2x0_base + L2X0_AUX_CTRL);
|
|
writel_relaxed(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL);
|
|
}
|
|
}
|
|
|
|
static void tauros3_resume(void)
|
|
{
|
|
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
|
|
writel_relaxed(l2x0_saved_regs.aux2_ctrl,
|
|
l2x0_base + TAUROS3_AUX2_CTRL);
|
|
writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
|
|
l2x0_base + L2X0_PREFETCH_CTRL);
|
|
}
|
|
|
|
l2x0_resume();
|
|
}
|
|
|
|
static void __init aurora_broadcast_l2_commands(void)
|
|
{
|
|
__u32 u;
|
|
/* Enable Broadcasting of cache commands to L2*/
|
|
__asm__ __volatile__("mrc p15, 1, %0, c15, c2, 0" : "=r"(u));
|
|
u |= AURORA_CTRL_FW; /* Set the FW bit */
|
|
__asm__ __volatile__("mcr p15, 1, %0, c15, c2, 0\n" : : "r"(u));
|
|
isb();
|
|
}
|
|
|
|
static void __init aurora_of_setup(const struct device_node *np,
|
|
u32 *aux_val, u32 *aux_mask)
|
|
{
|
|
u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU;
|
|
u32 mask = AURORA_ACR_REPLACEMENT_MASK;
|
|
|
|
of_property_read_u32(np, "cache-id-part",
|
|
&cache_id_part_number_from_dt);
|
|
|
|
/* Determine and save the write policy */
|
|
l2_wt_override = of_property_read_bool(np, "wt-override");
|
|
|
|
if (l2_wt_override) {
|
|
val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY;
|
|
mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK;
|
|
}
|
|
|
|
*aux_val &= ~mask;
|
|
*aux_val |= val;
|
|
*aux_mask &= ~mask;
|
|
}
|
|
|
|
static const struct l2x0_of_data pl310_data = {
|
|
.setup = pl310_of_setup,
|
|
.save = pl310_save,
|
|
.outer_cache = {
|
|
.resume = pl310_resume,
|
|
.inv_range = l2x0_inv_range,
|
|
.clean_range = l2x0_clean_range,
|
|
.flush_range = l2x0_flush_range,
|
|
.sync = l2x0_cache_sync,
|
|
.flush_all = l2x0_flush_all,
|
|
.inv_all = l2x0_inv_all,
|
|
.disable = l2x0_disable,
|
|
},
|
|
};
|
|
|
|
static const struct l2x0_of_data l2x0_data = {
|
|
.setup = l2x0_of_setup,
|
|
.save = NULL,
|
|
.outer_cache = {
|
|
.resume = l2x0_resume,
|
|
.inv_range = l2x0_inv_range,
|
|
.clean_range = l2x0_clean_range,
|
|
.flush_range = l2x0_flush_range,
|
|
.sync = l2x0_cache_sync,
|
|
.flush_all = l2x0_flush_all,
|
|
.inv_all = l2x0_inv_all,
|
|
.disable = l2x0_disable,
|
|
},
|
|
};
|
|
|
|
static const struct l2x0_of_data aurora_with_outer_data = {
|
|
.setup = aurora_of_setup,
|
|
.save = aurora_save,
|
|
.outer_cache = {
|
|
.resume = aurora_resume,
|
|
.inv_range = aurora_inv_range,
|
|
.clean_range = aurora_clean_range,
|
|
.flush_range = aurora_flush_range,
|
|
.sync = l2x0_cache_sync,
|
|
.flush_all = l2x0_flush_all,
|
|
.inv_all = l2x0_inv_all,
|
|
.disable = l2x0_disable,
|
|
},
|
|
};
|
|
|
|
static const struct l2x0_of_data aurora_no_outer_data = {
|
|
.setup = aurora_of_setup,
|
|
.save = aurora_save,
|
|
.outer_cache = {
|
|
.resume = aurora_resume,
|
|
},
|
|
};
|
|
|
|
static const struct l2x0_of_data tauros3_data = {
|
|
.setup = NULL,
|
|
.save = tauros3_save,
|
|
/* Tauros3 broadcasts L1 cache operations to L2 */
|
|
.outer_cache = {
|
|
.resume = tauros3_resume,
|
|
},
|
|
};
|
|
|
|
static const struct l2x0_of_data bcm_l2x0_data = {
|
|
.setup = pl310_of_setup,
|
|
.save = pl310_save,
|
|
.outer_cache = {
|
|
.resume = pl310_resume,
|
|
.inv_range = bcm_inv_range,
|
|
.clean_range = bcm_clean_range,
|
|
.flush_range = bcm_flush_range,
|
|
.sync = l2x0_cache_sync,
|
|
.flush_all = l2x0_flush_all,
|
|
.inv_all = l2x0_inv_all,
|
|
.disable = l2x0_disable,
|
|
},
|
|
};
|
|
|
|
static const struct of_device_id l2x0_ids[] __initconst = {
|
|
{ .compatible = "arm,l210-cache", .data = (void *)&l2x0_data },
|
|
{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
|
|
{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
|
|
{ .compatible = "bcm,bcm11351-a2-pl310-cache", /* deprecated name */
|
|
.data = (void *)&bcm_l2x0_data},
|
|
{ .compatible = "brcm,bcm11351-a2-pl310-cache",
|
|
.data = (void *)&bcm_l2x0_data},
|
|
{ .compatible = "marvell,aurora-outer-cache",
|
|
.data = (void *)&aurora_with_outer_data},
|
|
{ .compatible = "marvell,aurora-system-cache",
|
|
.data = (void *)&aurora_no_outer_data},
|
|
{ .compatible = "marvell,tauros3-cache",
|
|
.data = (void *)&tauros3_data },
|
|
{}
|
|
};
|
|
|
|
int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
|
|
{
|
|
struct device_node *np;
|
|
const struct l2x0_of_data *data;
|
|
struct resource res;
|
|
|
|
np = of_find_matching_node(NULL, l2x0_ids);
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
if (of_address_to_resource(np, 0, &res))
|
|
return -ENODEV;
|
|
|
|
l2x0_base = ioremap(res.start, resource_size(&res));
|
|
if (!l2x0_base)
|
|
return -ENOMEM;
|
|
|
|
l2x0_saved_regs.phy_base = res.start;
|
|
|
|
data = of_match_node(l2x0_ids, np)->data;
|
|
|
|
/* L2 configuration can only be changed if the cache is disabled */
|
|
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
|
|
if (data->setup)
|
|
data->setup(np, &aux_val, &aux_mask);
|
|
|
|
/* For aurora cache in no outer mode select the
|
|
* correct mode using the coprocessor*/
|
|
if (data == &aurora_no_outer_data)
|
|
aurora_broadcast_l2_commands();
|
|
}
|
|
|
|
if (data->save)
|
|
data->save();
|
|
|
|
of_init = true;
|
|
memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache));
|
|
l2x0_init(l2x0_base, aux_val, aux_mask);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|