mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 05:46:47 +07:00
5e037e7480
Add support for two MAC addresses. If the NVS has a valid MAC address, that takes precedence and we use two sequential address starting from the one specified. If the NVS doesn't contain a valid MAC address (ie. if it is set to 00:00:00:00:00:00), we check if the HW PG version in use has the BD_ADDR written in the fuse ROM. If it does, we read it and derive the two subsequent addresses for WLAN. During production, 3 addresses are reserved per device. The first for Bluetooth (burnt in the fuse ROM) and the following two for WLAN. This patch has some code by Igal and Arik (squashed from internal patches). Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
121 lines
3.5 KiB
C
121 lines
3.5 KiB
C
/*
|
|
* This file is part of wl1271
|
|
*
|
|
* Copyright (C) 2008-2009 Nokia Corporation
|
|
*
|
|
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
|
* 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifndef __BOOT_H__
|
|
#define __BOOT_H__
|
|
|
|
#include "wl12xx.h"
|
|
|
|
int wl1271_boot(struct wl1271 *wl);
|
|
int wl1271_load_firmware(struct wl1271 *wl);
|
|
|
|
#define WL1271_NO_SUBBANDS 8
|
|
#define WL1271_NO_POWER_LEVELS 4
|
|
#define WL1271_FW_VERSION_MAX_LEN 20
|
|
|
|
struct wl1271_static_data {
|
|
u8 mac_address[ETH_ALEN];
|
|
u8 padding[2];
|
|
u8 fw_version[WL1271_FW_VERSION_MAX_LEN];
|
|
u32 hw_version;
|
|
u8 tx_power_table[WL1271_NO_SUBBANDS][WL1271_NO_POWER_LEVELS];
|
|
};
|
|
|
|
/* number of times we try to read the INIT interrupt */
|
|
#define INIT_LOOP 20000
|
|
|
|
/* delay between retries */
|
|
#define INIT_LOOP_DELAY 50
|
|
|
|
#define WU_COUNTER_PAUSE_VAL 0x3FF
|
|
#define WELP_ARM_COMMAND_VAL 0x4
|
|
|
|
#define OCP_REG_POLARITY 0x0064
|
|
#define OCP_REG_CLK_TYPE 0x0448
|
|
#define OCP_REG_CLK_POLARITY 0x0cb2
|
|
#define OCP_REG_CLK_PULL 0x0cb4
|
|
|
|
#define CMD_MBOX_ADDRESS 0x407B4
|
|
|
|
#define POLARITY_LOW BIT(1)
|
|
#define NO_PULL (BIT(14) | BIT(15))
|
|
|
|
#define FREF_CLK_TYPE_BITS 0xfffffe7f
|
|
#define CLK_REQ_PRCM 0x100
|
|
#define FREF_CLK_POLARITY_BITS 0xfffff8ff
|
|
#define CLK_REQ_OUTN_SEL 0x700
|
|
|
|
/* PLL configuration algorithm for wl128x */
|
|
#define SYS_CLK_CFG_REG 0x2200
|
|
/* Bit[0] - 0-TCXO, 1-FREF */
|
|
#define MCS_PLL_CLK_SEL_FREF BIT(0)
|
|
/* Bit[3:2] - 01-TCXO, 10-FREF */
|
|
#define WL_CLK_REQ_TYPE_FREF BIT(3)
|
|
#define WL_CLK_REQ_TYPE_PG2 (BIT(3) | BIT(2))
|
|
/* Bit[4] - 0-TCXO, 1-FREF */
|
|
#define PRCM_CM_EN_MUX_WLAN_FREF BIT(4)
|
|
|
|
#define TCXO_ILOAD_INT_REG 0x2264
|
|
#define TCXO_CLK_DETECT_REG 0x2266
|
|
|
|
#define TCXO_DET_FAILED BIT(4)
|
|
|
|
#define FREF_ILOAD_INT_REG 0x2084
|
|
#define FREF_CLK_DETECT_REG 0x2086
|
|
#define FREF_CLK_DETECT_FAIL BIT(4)
|
|
|
|
/* Use this reg for masking during driver access */
|
|
#define WL_SPARE_REG 0x2320
|
|
#define WL_SPARE_VAL BIT(2)
|
|
/* Bit[6:5:3] - mask wl write SYS_CLK_CFG[8:5:2:4] */
|
|
#define WL_SPARE_MASK_8526 (BIT(6) | BIT(5) | BIT(3))
|
|
|
|
#define PLL_LOCK_COUNTERS_REG 0xD8C
|
|
#define PLL_LOCK_COUNTERS_COEX 0x0F
|
|
#define PLL_LOCK_COUNTERS_MCS 0xF0
|
|
#define MCS_PLL_OVERRIDE_REG 0xD90
|
|
#define MCS_PLL_CONFIG_REG 0xD92
|
|
#define MCS_SEL_IN_FREQ_MASK 0x0070
|
|
#define MCS_SEL_IN_FREQ_SHIFT 4
|
|
#define MCS_PLL_CONFIG_REG_VAL 0x73
|
|
#define MCS_PLL_ENABLE_HP (BIT(0) | BIT(1))
|
|
|
|
#define MCS_PLL_M_REG 0xD94
|
|
#define MCS_PLL_N_REG 0xD96
|
|
#define MCS_PLL_M_REG_VAL 0xC8
|
|
#define MCS_PLL_N_REG_VAL 0x07
|
|
|
|
#define SDIO_IO_DS 0xd14
|
|
|
|
/* SDIO/wSPI DS configuration values */
|
|
enum {
|
|
HCI_IO_DS_8MA = 0,
|
|
HCI_IO_DS_4MA = 1, /* default */
|
|
HCI_IO_DS_6MA = 2,
|
|
HCI_IO_DS_2MA = 3,
|
|
};
|
|
|
|
/* end PLL configuration algorithm for wl128x */
|
|
|
|
#endif
|