mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 19:55:05 +07:00
be4e456ed3
This adds a driver for the Faraday Technology FTIDE010 PATA IP block. When used with the Storlink/Storm/Cortina Systems Gemini SoC, the PATA interface is accompanied by a PATA<->SATA bridge, so while the device appear as a PATA controller, it attaches physically to SATA disks, and also has a designated memory area with registers to set up the bridge. The Gemini SATA bridge is separated into its own driver file to make things modular and make it possible to reuse the PATA driver as stand-alone on other systems than the Gemini. dmesg excerpt from the D-Link DIR-685 storage router: gemini-sata-bridge 46000000.sata: SATA ID 00000e00, PHY ID: 01000100 gemini-sata-bridge 46000000.sata: set up the Gemini IDE/SATA nexus ftide010 63000000.ata: set up Gemini PATA0 ftide010 63000000.ata: device ID 00000500, irq 26, io base 0x63000000 ftide010 63000000.ata: SATA0 (master) start gemini-sata-bridge 46000000.sata: SATA0 PHY ready scsi host0: pata-ftide010 ata1: PATA max UDMA/133 irq 26 ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10302, max UDMA/133 ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 0302 PQ: 0 ANSI: 5 ata1.00: Enabling discard_zeroes_data sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: Enabling discard_zeroes_data ata1.00: Enabling discard_zeroes_data sd 0:0:0:0: [sda] Attached SCSI disk After this I can flawlessly mount and read/write copy etc files from /dev/sda[n]. Cc: John Feng-Hsin Chiang <john453@faraday-tech.com> Cc: Greentime Hu <green.hu@gmail.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
128 lines
5.2 KiB
Makefile
128 lines
5.2 KiB
Makefile
|
|
obj-$(CONFIG_ATA) += libata.o
|
|
|
|
# non-SFF interface
|
|
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
|
|
obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o
|
|
obj-$(CONFIG_SATA_AHCI_SEATTLE) += ahci_seattle.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
|
|
obj-$(CONFIG_SATA_GEMINI) += sata_gemini.o
|
|
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
|
|
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
|
|
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
|
|
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
|
|
obj-$(CONFIG_AHCI_BRCM) += ahci_brcm.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_DM816) += ahci_dm816.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_OCTEON) += ahci_octeon.o
|
|
obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_TEGRA) += ahci_tegra.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_QORIQ) += ahci_qoriq.o libahci.o libahci_platform.o
|
|
|
|
# SFF w/ custom DMA
|
|
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
|
|
obj-$(CONFIG_PATA_ARASAN_CF) += pata_arasan_cf.o
|
|
obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
|
|
obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o
|
|
obj-$(CONFIG_SATA_SX4) += sata_sx4.o
|
|
|
|
# SFF SATA w/ BMDMA
|
|
obj-$(CONFIG_ATA_PIIX) += ata_piix.o
|
|
obj-$(CONFIG_SATA_MV) += sata_mv.o
|
|
obj-$(CONFIG_SATA_NV) += sata_nv.o
|
|
obj-$(CONFIG_SATA_PROMISE) += sata_promise.o
|
|
obj-$(CONFIG_SATA_RCAR) += sata_rcar.o
|
|
obj-$(CONFIG_SATA_SIL) += sata_sil.o
|
|
obj-$(CONFIG_SATA_SIS) += sata_sis.o
|
|
obj-$(CONFIG_SATA_SVW) += sata_svw.o
|
|
obj-$(CONFIG_SATA_ULI) += sata_uli.o
|
|
obj-$(CONFIG_SATA_VIA) += sata_via.o
|
|
obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o
|
|
|
|
# SFF PATA w/ BMDMA
|
|
obj-$(CONFIG_PATA_ALI) += pata_ali.o
|
|
obj-$(CONFIG_PATA_AMD) += pata_amd.o
|
|
obj-$(CONFIG_PATA_ARTOP) += pata_artop.o
|
|
obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o
|
|
obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o
|
|
obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
|
|
obj-$(CONFIG_PATA_BK3710) += pata_bk3710.o
|
|
obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o
|
|
obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o
|
|
obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o
|
|
obj-$(CONFIG_PATA_CS5535) += pata_cs5535.o
|
|
obj-$(CONFIG_PATA_CS5536) += pata_cs5536.o
|
|
obj-$(CONFIG_PATA_CYPRESS) += pata_cypress.o
|
|
obj-$(CONFIG_PATA_EFAR) += pata_efar.o
|
|
obj-$(CONFIG_PATA_EP93XX) += pata_ep93xx.o
|
|
obj-$(CONFIG_PATA_FTIDE010) += pata_ftide010.o
|
|
obj-$(CONFIG_PATA_HPT366) += pata_hpt366.o
|
|
obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o
|
|
obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
|
|
obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o
|
|
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
|
|
obj-$(CONFIG_PATA_IMX) += pata_imx.o
|
|
obj-$(CONFIG_PATA_IT8213) += pata_it8213.o
|
|
obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
|
|
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
|
|
obj-$(CONFIG_PATA_MACIO) += pata_macio.o
|
|
obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
|
|
obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
|
|
obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
|
|
obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o
|
|
obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o
|
|
obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o
|
|
obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o
|
|
obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o
|
|
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
|
|
obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o
|
|
obj-$(CONFIG_PATA_RDC) += pata_rdc.o
|
|
obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o
|
|
obj-$(CONFIG_PATA_SCH) += pata_sch.o
|
|
obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
|
|
obj-$(CONFIG_PATA_SIL680) += pata_sil680.o
|
|
obj-$(CONFIG_PATA_SIS) += pata_sis.o
|
|
obj-$(CONFIG_PATA_TOSHIBA) += pata_piccolo.o
|
|
obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
|
|
obj-$(CONFIG_PATA_VIA) += pata_via.o
|
|
obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
|
|
|
|
# SFF PIO only
|
|
obj-$(CONFIG_PATA_AT32) += pata_at32.o
|
|
obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
|
|
obj-$(CONFIG_PATA_FALCON) += pata_falcon.o
|
|
obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
|
|
obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
|
|
obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
|
|
obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o
|
|
obj-$(CONFIG_PATA_OPTI) += pata_opti.o
|
|
obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
|
|
obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
|
|
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
|
|
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
|
|
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
|
|
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
|
|
obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
|
|
|
|
obj-$(CONFIG_PATA_PXA) += pata_pxa.o
|
|
|
|
# Should be last but two libata driver
|
|
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
|
|
# Should be last but one libata driver
|
|
obj-$(CONFIG_ATA_GENERIC) += ata_generic.o
|
|
# Should be last libata driver
|
|
obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o
|
|
|
|
libata-y := libata-core.o libata-scsi.o libata-eh.o \
|
|
libata-transport.o libata-trace.o
|
|
libata-$(CONFIG_ATA_SFF) += libata-sff.o
|
|
libata-$(CONFIG_SATA_PMP) += libata-pmp.o
|
|
libata-$(CONFIG_ATA_ACPI) += libata-acpi.o
|
|
libata-$(CONFIG_SATA_ZPODD) += libata-zpodd.o
|