mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 16:25:07 +07:00
2cb6115deb
- New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D Board. - A series from Alexandre Belloni to correct the vendor prefix for rv4162 compatible. - A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and imx7d-sdb board. - Increase the SGTL5000 LRCLK pad strength to fix a random audio channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri boards. - Clean up non-existing property 'enable-active-low' from fixed regulator device nodes. - Correct GPIO polarity for Ethernet PHY and PCI reset lines, even though device drivers do not use the polarity for now. - Add Wifi and Bluetooth support for imx7d-sdb board. - Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding. - Update zii-rdu2 device tree source to use #include "..." for local inclusion. - A series from Philipp Zabel and Steve Longerbeam to enable video capture support for imx6qdl platforms. - A number of small random updates on various board support. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJZRcZ+AAoJEFBXWFqHsHzOPrcIAKrIeegjnl29Fp6JA2u3xC3R XRyi59ybxGLB/8FNdbKqWJS9cAgOuF61FgYIgSRTqxVobPtZTdGMicnbp+FTTRYa AaXxeB+3YVH2PJxDB1f4ZrlcBMNo3cpSO4ECbtnBgxoupQXOKIBQbLbujbyjsnbP d/XFCC6LQFlL7yH8+jQrjiUkk0HSzHpzq3Kt6Dzq7WqWsOghOqDfsV2PhqnKvNzL V0iovP9u9rayWn7Ik+bg7GlOtdaBTf8i0/TN4LcpCiKSw3wh7Uz03E0Cd2WMIO3N Qs9R2QQ/GS0zZOmBlpYBO2waw9Xy9ZnbX/5zJtnw29IBiVdmbSNA5Q0QJySxPtw= =hxCr -----END PGP SIGNATURE----- Merge tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt The i.MX device tree updates for 4.13: - New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D Board. - A series from Alexandre Belloni to correct the vendor prefix for rv4162 compatible. - A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and imx7d-sdb board. - Increase the SGTL5000 LRCLK pad strength to fix a random audio channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri boards. - Clean up non-existing property 'enable-active-low' from fixed regulator device nodes. - Correct GPIO polarity for Ethernet PHY and PCI reset lines, even though device drivers do not use the polarity for now. - Add Wifi and Bluetooth support for imx7d-sdb board. - Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding. - Update zii-rdu2 device tree source to use #include "..." for local inclusion. - A series from Philipp Zabel and Steve Longerbeam to enable video capture support for imx6qdl platforms. - A number of small random updates on various board support. * tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits) ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes ARM: dts: ls1021a: update the clockgen node ARM: dts: imx6-sabreauto: add the ADV7180 video decoder ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b ARM: dts: imx6-sabreauto: create i2cmux for i2c3 ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround ARM: dts: imx6qdl: add capture-subsystem device ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node ARM: dts: imx6qdl: add multiplexer controls ARM: dts: imx6: Fix PCI GPIO reset polarity ARM: dts: imx7d-sdb: Add Bluetooth support ARM: dts: imx7d-sdb: Add Wifi support ARM: dts: imx7d-sdb: Adjust the regulator nodes ARM: dts: imx: Fix Ethernet PHY reset polarity ARM: dts: imx7: Fix typo in watchdog pin name ARM: dts: vf610-zii: Add switch eeprom-length properties ... Signed-off-by: Olof Johansson <olof@lixom.net>
139 lines
2.8 KiB
Plaintext
139 lines
2.8 KiB
Plaintext
/*
|
|
* Copyright (C) 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include "imx6sx-sdb.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX6 SoloX SDB RevB Board";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pmic: pfuze100@08 {
|
|
compatible = "fsl,pfuze200";
|
|
reg = <0x08>;
|
|
|
|
regulators {
|
|
sw1a_reg: sw1ab {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3a {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3b_reg: sw3b {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
snvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen1_reg: vgen1 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen2_reg: vgen2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen3_reg: vgen3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen4_reg: vgen4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vgen5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen6_reg: vgen6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&qspi2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_qspi2>;
|
|
status = "okay";
|
|
|
|
flash0: n25q256a@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "micron,n25q256a", "jedec,spi-nor";
|
|
spi-max-frequency = <29000000>;
|
|
reg = <0>;
|
|
};
|
|
|
|
flash1: n25q256a@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "micron,n25q256a", "jedec,spi-nor";
|
|
spi-max-frequency = <29000000>;
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
®_arm {
|
|
vin-supply = <&sw1a_reg>;
|
|
};
|
|
|
|
®_soc {
|
|
vin-supply = <&sw1a_reg>;
|
|
};
|