mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-17 05:41:10 +07:00
eb805623d8
Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
1271 lines
37 KiB
C
1271 lines
37 KiB
C
/* i915_dma.c -- DMA support for the I915 -*- linux-c -*-
|
|
*/
|
|
/*
|
|
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
|
|
* All Rights Reserved.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
|
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
|
|
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
|
|
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/async.h>
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_fb_helper.h>
|
|
#include <drm/drm_legacy.h>
|
|
#include "intel_drv.h"
|
|
#include <drm/i915_drm.h>
|
|
#include "i915_drv.h"
|
|
#include "i915_vgpu.h"
|
|
#include "i915_trace.h"
|
|
#include <linux/pci.h>
|
|
#include <linux/console.h>
|
|
#include <linux/vt.h>
|
|
#include <linux/vgaarb.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/pnp.h>
|
|
#include <linux/vga_switcheroo.h>
|
|
#include <linux/slab.h>
|
|
#include <acpi/video.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/oom.h>
|
|
|
|
|
|
static int i915_getparam(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
drm_i915_getparam_t *param = data;
|
|
int value;
|
|
|
|
switch (param->param) {
|
|
case I915_PARAM_IRQ_ACTIVE:
|
|
case I915_PARAM_ALLOW_BATCHBUFFER:
|
|
case I915_PARAM_LAST_DISPATCH:
|
|
/* Reject all old ums/dri params. */
|
|
return -ENODEV;
|
|
case I915_PARAM_CHIPSET_ID:
|
|
value = dev->pdev->device;
|
|
break;
|
|
case I915_PARAM_REVISION:
|
|
value = dev->pdev->revision;
|
|
break;
|
|
case I915_PARAM_HAS_GEM:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_NUM_FENCES_AVAIL:
|
|
value = dev_priv->num_fence_regs - dev_priv->fence_reg_start;
|
|
break;
|
|
case I915_PARAM_HAS_OVERLAY:
|
|
value = dev_priv->overlay ? 1 : 0;
|
|
break;
|
|
case I915_PARAM_HAS_PAGEFLIPPING:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_HAS_EXECBUF2:
|
|
/* depends on GEM */
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_HAS_BSD:
|
|
value = intel_ring_initialized(&dev_priv->ring[VCS]);
|
|
break;
|
|
case I915_PARAM_HAS_BLT:
|
|
value = intel_ring_initialized(&dev_priv->ring[BCS]);
|
|
break;
|
|
case I915_PARAM_HAS_VEBOX:
|
|
value = intel_ring_initialized(&dev_priv->ring[VECS]);
|
|
break;
|
|
case I915_PARAM_HAS_BSD2:
|
|
value = intel_ring_initialized(&dev_priv->ring[VCS2]);
|
|
break;
|
|
case I915_PARAM_HAS_RELAXED_FENCING:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_HAS_COHERENT_RINGS:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_HAS_EXEC_CONSTANTS:
|
|
value = INTEL_INFO(dev)->gen >= 4;
|
|
break;
|
|
case I915_PARAM_HAS_RELAXED_DELTA:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_HAS_GEN7_SOL_RESET:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_HAS_LLC:
|
|
value = HAS_LLC(dev);
|
|
break;
|
|
case I915_PARAM_HAS_WT:
|
|
value = HAS_WT(dev);
|
|
break;
|
|
case I915_PARAM_HAS_ALIASING_PPGTT:
|
|
value = USES_PPGTT(dev);
|
|
break;
|
|
case I915_PARAM_HAS_WAIT_TIMEOUT:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_HAS_SEMAPHORES:
|
|
value = i915_semaphore_is_enabled(dev);
|
|
break;
|
|
case I915_PARAM_HAS_PRIME_VMAP_FLUSH:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_HAS_SECURE_BATCHES:
|
|
value = capable(CAP_SYS_ADMIN);
|
|
break;
|
|
case I915_PARAM_HAS_PINNED_BATCHES:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_HAS_EXEC_NO_RELOC:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_HAS_EXEC_HANDLE_LUT:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_CMD_PARSER_VERSION:
|
|
value = i915_cmd_parser_get_version();
|
|
break;
|
|
case I915_PARAM_HAS_COHERENT_PHYS_GTT:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_MMAP_VERSION:
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_SUBSLICE_TOTAL:
|
|
value = INTEL_INFO(dev)->subslice_total;
|
|
if (!value)
|
|
return -ENODEV;
|
|
break;
|
|
case I915_PARAM_EU_TOTAL:
|
|
value = INTEL_INFO(dev)->eu_total;
|
|
if (!value)
|
|
return -ENODEV;
|
|
break;
|
|
default:
|
|
DRM_DEBUG("Unknown parameter %d\n", param->param);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (copy_to_user(param->value, &value, sizeof(int))) {
|
|
DRM_ERROR("copy_to_user failed\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i915_setparam(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
drm_i915_setparam_t *param = data;
|
|
|
|
switch (param->param) {
|
|
case I915_SETPARAM_USE_MI_BATCHBUFFER_START:
|
|
case I915_SETPARAM_TEX_LRU_LOG_GRANULARITY:
|
|
case I915_SETPARAM_ALLOW_BATCHBUFFER:
|
|
/* Reject all old ums/dri params. */
|
|
return -ENODEV;
|
|
|
|
case I915_SETPARAM_NUM_USED_FENCES:
|
|
if (param->value > dev_priv->num_fence_regs ||
|
|
param->value < 0)
|
|
return -EINVAL;
|
|
/* Userspace can use first N regs */
|
|
dev_priv->fence_reg_start = param->value;
|
|
break;
|
|
default:
|
|
DRM_DEBUG_DRIVER("unknown parameter %d\n",
|
|
param->param);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i915_get_bridge_dev(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
|
|
if (!dev_priv->bridge_dev) {
|
|
DRM_ERROR("bridge device not found\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#define MCHBAR_I915 0x44
|
|
#define MCHBAR_I965 0x48
|
|
#define MCHBAR_SIZE (4*4096)
|
|
|
|
#define DEVEN_REG 0x54
|
|
#define DEVEN_MCHBAR_EN (1 << 28)
|
|
|
|
/* Allocate space for the MCH regs if needed, return nonzero on error */
|
|
static int
|
|
intel_alloc_mchbar_resource(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
|
|
u32 temp_lo, temp_hi = 0;
|
|
u64 mchbar_addr;
|
|
int ret;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4)
|
|
pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
|
|
pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
|
|
mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
|
|
|
|
/* If ACPI doesn't have it, assume we need to allocate it ourselves */
|
|
#ifdef CONFIG_PNP
|
|
if (mchbar_addr &&
|
|
pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
|
|
return 0;
|
|
#endif
|
|
|
|
/* Get some space for it */
|
|
dev_priv->mch_res.name = "i915 MCHBAR";
|
|
dev_priv->mch_res.flags = IORESOURCE_MEM;
|
|
ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
|
|
&dev_priv->mch_res,
|
|
MCHBAR_SIZE, MCHBAR_SIZE,
|
|
PCIBIOS_MIN_MEM,
|
|
0, pcibios_align_resource,
|
|
dev_priv->bridge_dev);
|
|
if (ret) {
|
|
DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
|
|
dev_priv->mch_res.start = 0;
|
|
return ret;
|
|
}
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4)
|
|
pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
|
|
upper_32_bits(dev_priv->mch_res.start));
|
|
|
|
pci_write_config_dword(dev_priv->bridge_dev, reg,
|
|
lower_32_bits(dev_priv->mch_res.start));
|
|
return 0;
|
|
}
|
|
|
|
/* Setup MCHBAR if possible, return true if we should disable it again */
|
|
static void
|
|
intel_setup_mchbar(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
|
|
u32 temp;
|
|
bool enabled;
|
|
|
|
if (IS_VALLEYVIEW(dev))
|
|
return;
|
|
|
|
dev_priv->mchbar_need_disable = false;
|
|
|
|
if (IS_I915G(dev) || IS_I915GM(dev)) {
|
|
pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
|
|
enabled = !!(temp & DEVEN_MCHBAR_EN);
|
|
} else {
|
|
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
|
|
enabled = temp & 1;
|
|
}
|
|
|
|
/* If it's already enabled, don't have to do anything */
|
|
if (enabled)
|
|
return;
|
|
|
|
if (intel_alloc_mchbar_resource(dev))
|
|
return;
|
|
|
|
dev_priv->mchbar_need_disable = true;
|
|
|
|
/* Space is allocated or reserved, so enable it. */
|
|
if (IS_I915G(dev) || IS_I915GM(dev)) {
|
|
pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG,
|
|
temp | DEVEN_MCHBAR_EN);
|
|
} else {
|
|
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
|
|
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
|
|
}
|
|
}
|
|
|
|
static void
|
|
intel_teardown_mchbar(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
|
|
u32 temp;
|
|
|
|
if (dev_priv->mchbar_need_disable) {
|
|
if (IS_I915G(dev) || IS_I915GM(dev)) {
|
|
pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
|
|
temp &= ~DEVEN_MCHBAR_EN;
|
|
pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, temp);
|
|
} else {
|
|
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
|
|
temp &= ~1;
|
|
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp);
|
|
}
|
|
}
|
|
|
|
if (dev_priv->mch_res.start)
|
|
release_resource(&dev_priv->mch_res);
|
|
}
|
|
|
|
/* true = enable decode, false = disable decoder */
|
|
static unsigned int i915_vga_set_decode(void *cookie, bool state)
|
|
{
|
|
struct drm_device *dev = cookie;
|
|
|
|
intel_modeset_vga_set_state(dev, state);
|
|
if (state)
|
|
return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
|
|
VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
|
|
else
|
|
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
|
|
}
|
|
|
|
static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
|
|
{
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
|
|
|
|
if (state == VGA_SWITCHEROO_ON) {
|
|
pr_info("switched on\n");
|
|
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
|
|
/* i915 resume handler doesn't set to D0 */
|
|
pci_set_power_state(dev->pdev, PCI_D0);
|
|
i915_resume_legacy(dev);
|
|
dev->switch_power_state = DRM_SWITCH_POWER_ON;
|
|
} else {
|
|
pr_err("switched off\n");
|
|
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
|
|
i915_suspend_legacy(dev, pmm);
|
|
dev->switch_power_state = DRM_SWITCH_POWER_OFF;
|
|
}
|
|
}
|
|
|
|
static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
|
|
{
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
|
|
/*
|
|
* FIXME: open_count is protected by drm_global_mutex but that would lead to
|
|
* locking inversion with the driver load path. And the access here is
|
|
* completely racy anyway. So don't bother with locking for now.
|
|
*/
|
|
return dev->open_count == 0;
|
|
}
|
|
|
|
static const struct vga_switcheroo_client_ops i915_switcheroo_ops = {
|
|
.set_gpu_state = i915_switcheroo_set_state,
|
|
.reprobe = NULL,
|
|
.can_switch = i915_switcheroo_can_switch,
|
|
};
|
|
|
|
static int i915_load_modeset_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int ret;
|
|
|
|
ret = intel_parse_bios(dev);
|
|
if (ret)
|
|
DRM_INFO("failed to find VBIOS tables\n");
|
|
|
|
/* If we have > 1 VGA cards, then we need to arbitrate access
|
|
* to the common VGA resources.
|
|
*
|
|
* If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
|
|
* then we do not take part in VGA arbitration and the
|
|
* vga_client_register() fails with -ENODEV.
|
|
*/
|
|
ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
|
|
if (ret && ret != -ENODEV)
|
|
goto out;
|
|
|
|
intel_register_dsm_handler();
|
|
|
|
ret = vga_switcheroo_register_client(dev->pdev, &i915_switcheroo_ops, false);
|
|
if (ret)
|
|
goto cleanup_vga_client;
|
|
|
|
/* Initialise stolen first so that we may reserve preallocated
|
|
* objects for the BIOS to KMS transition.
|
|
*/
|
|
ret = i915_gem_init_stolen(dev);
|
|
if (ret)
|
|
goto cleanup_vga_switcheroo;
|
|
|
|
intel_power_domains_init_hw(dev_priv);
|
|
|
|
ret = intel_irq_install(dev_priv);
|
|
if (ret)
|
|
goto cleanup_gem_stolen;
|
|
|
|
/* Important: The output setup functions called by modeset_init need
|
|
* working irqs for e.g. gmbus and dp aux transfers. */
|
|
intel_modeset_init(dev);
|
|
|
|
ret = i915_gem_init(dev);
|
|
if (ret)
|
|
goto cleanup_irq;
|
|
|
|
intel_modeset_gem_init(dev);
|
|
|
|
/* Always safe in the mode setting case. */
|
|
/* FIXME: do pre/post-mode set stuff in core KMS code */
|
|
dev->vblank_disable_allowed = true;
|
|
if (INTEL_INFO(dev)->num_pipes == 0)
|
|
return 0;
|
|
|
|
ret = intel_fbdev_init(dev);
|
|
if (ret)
|
|
goto cleanup_gem;
|
|
|
|
/* Only enable hotplug handling once the fbdev is fully set up. */
|
|
intel_hpd_init(dev_priv);
|
|
|
|
/*
|
|
* Some ports require correctly set-up hpd registers for detection to
|
|
* work properly (leading to ghost connected connector status), e.g. VGA
|
|
* on gm45. Hence we can only set up the initial fbdev config after hpd
|
|
* irqs are fully enabled. Now we should scan for the initial config
|
|
* only once hotplug handling is enabled, but due to screwed-up locking
|
|
* around kms/fbdev init we can't protect the fdbev initial config
|
|
* scanning against hotplug events. Hence do this first and ignore the
|
|
* tiny window where we will loose hotplug notifactions.
|
|
*/
|
|
async_schedule(intel_fbdev_initial_config, dev_priv);
|
|
|
|
drm_kms_helper_poll_init(dev);
|
|
|
|
return 0;
|
|
|
|
cleanup_gem:
|
|
mutex_lock(&dev->struct_mutex);
|
|
i915_gem_cleanup_ringbuffer(dev);
|
|
i915_gem_context_fini(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
cleanup_irq:
|
|
drm_irq_uninstall(dev);
|
|
cleanup_gem_stolen:
|
|
i915_gem_cleanup_stolen(dev);
|
|
cleanup_vga_switcheroo:
|
|
vga_switcheroo_unregister_client(dev->pdev);
|
|
cleanup_vga_client:
|
|
vga_client_register(dev->pdev, NULL, NULL, NULL);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_FB)
|
|
static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct apertures_struct *ap;
|
|
struct pci_dev *pdev = dev_priv->dev->pdev;
|
|
bool primary;
|
|
int ret;
|
|
|
|
ap = alloc_apertures(1);
|
|
if (!ap)
|
|
return -ENOMEM;
|
|
|
|
ap->ranges[0].base = dev_priv->gtt.mappable_base;
|
|
ap->ranges[0].size = dev_priv->gtt.mappable_end;
|
|
|
|
primary =
|
|
pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
|
|
|
|
ret = remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
|
|
|
|
kfree(ap);
|
|
|
|
return ret;
|
|
}
|
|
#else
|
|
static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if !defined(CONFIG_VGA_CONSOLE)
|
|
static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
|
|
{
|
|
return 0;
|
|
}
|
|
#elif !defined(CONFIG_DUMMY_CONSOLE)
|
|
static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#else
|
|
static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
|
|
{
|
|
int ret = 0;
|
|
|
|
DRM_INFO("Replacing VGA console driver\n");
|
|
|
|
console_lock();
|
|
if (con_is_bound(&vga_con))
|
|
ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
|
|
if (ret == 0) {
|
|
ret = do_unregister_con_driver(&vga_con);
|
|
|
|
/* Ignore "already unregistered". */
|
|
if (ret == -ENODEV)
|
|
ret = 0;
|
|
}
|
|
console_unlock();
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static void i915_dump_device_info(struct drm_i915_private *dev_priv)
|
|
{
|
|
const struct intel_device_info *info = &dev_priv->info;
|
|
|
|
#define PRINT_S(name) "%s"
|
|
#define SEP_EMPTY
|
|
#define PRINT_FLAG(name) info->name ? #name "," : ""
|
|
#define SEP_COMMA ,
|
|
DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
|
|
DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
|
|
info->gen,
|
|
dev_priv->dev->pdev->device,
|
|
dev_priv->dev->pdev->revision,
|
|
DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
|
|
#undef PRINT_S
|
|
#undef SEP_EMPTY
|
|
#undef PRINT_FLAG
|
|
#undef SEP_COMMA
|
|
}
|
|
|
|
static void cherryview_sseu_info_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_device_info *info;
|
|
u32 fuse, eu_dis;
|
|
|
|
info = (struct intel_device_info *)&dev_priv->info;
|
|
fuse = I915_READ(CHV_FUSE_GT);
|
|
|
|
info->slice_total = 1;
|
|
|
|
if (!(fuse & CHV_FGT_DISABLE_SS0)) {
|
|
info->subslice_per_slice++;
|
|
eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
|
|
CHV_FGT_EU_DIS_SS0_R1_MASK);
|
|
info->eu_total += 8 - hweight32(eu_dis);
|
|
}
|
|
|
|
if (!(fuse & CHV_FGT_DISABLE_SS1)) {
|
|
info->subslice_per_slice++;
|
|
eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
|
|
CHV_FGT_EU_DIS_SS1_R1_MASK);
|
|
info->eu_total += 8 - hweight32(eu_dis);
|
|
}
|
|
|
|
info->subslice_total = info->subslice_per_slice;
|
|
/*
|
|
* CHV expected to always have a uniform distribution of EU
|
|
* across subslices.
|
|
*/
|
|
info->eu_per_subslice = info->subslice_total ?
|
|
info->eu_total / info->subslice_total :
|
|
0;
|
|
/*
|
|
* CHV supports subslice power gating on devices with more than
|
|
* one subslice, and supports EU power gating on devices with
|
|
* more than one EU pair per subslice.
|
|
*/
|
|
info->has_slice_pg = 0;
|
|
info->has_subslice_pg = (info->subslice_total > 1);
|
|
info->has_eu_pg = (info->eu_per_subslice > 2);
|
|
}
|
|
|
|
static void gen9_sseu_info_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_device_info *info;
|
|
int s_max = 3, ss_max = 4, eu_max = 8;
|
|
int s, ss;
|
|
u32 fuse2, s_enable, ss_disable, eu_disable;
|
|
u8 eu_mask = 0xff;
|
|
|
|
/*
|
|
* BXT has a single slice. BXT also has at most 6 EU per subslice,
|
|
* and therefore only the lowest 6 bits of the 8-bit EU disable
|
|
* fields are valid.
|
|
*/
|
|
if (IS_BROXTON(dev)) {
|
|
s_max = 1;
|
|
eu_max = 6;
|
|
eu_mask = 0x3f;
|
|
}
|
|
|
|
info = (struct intel_device_info *)&dev_priv->info;
|
|
fuse2 = I915_READ(GEN8_FUSE2);
|
|
s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
|
|
GEN8_F2_S_ENA_SHIFT;
|
|
ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
|
|
GEN9_F2_SS_DIS_SHIFT;
|
|
|
|
info->slice_total = hweight32(s_enable);
|
|
/*
|
|
* The subslice disable field is global, i.e. it applies
|
|
* to each of the enabled slices.
|
|
*/
|
|
info->subslice_per_slice = ss_max - hweight32(ss_disable);
|
|
info->subslice_total = info->slice_total *
|
|
info->subslice_per_slice;
|
|
|
|
/*
|
|
* Iterate through enabled slices and subslices to
|
|
* count the total enabled EU.
|
|
*/
|
|
for (s = 0; s < s_max; s++) {
|
|
if (!(s_enable & (0x1 << s)))
|
|
/* skip disabled slice */
|
|
continue;
|
|
|
|
eu_disable = I915_READ(GEN9_EU_DISABLE(s));
|
|
for (ss = 0; ss < ss_max; ss++) {
|
|
int eu_per_ss;
|
|
|
|
if (ss_disable & (0x1 << ss))
|
|
/* skip disabled subslice */
|
|
continue;
|
|
|
|
eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
|
|
eu_mask);
|
|
|
|
/*
|
|
* Record which subslice(s) has(have) 7 EUs. we
|
|
* can tune the hash used to spread work among
|
|
* subslices if they are unbalanced.
|
|
*/
|
|
if (eu_per_ss == 7)
|
|
info->subslice_7eu[s] |= 1 << ss;
|
|
|
|
info->eu_total += eu_per_ss;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* SKL is expected to always have a uniform distribution
|
|
* of EU across subslices with the exception that any one
|
|
* EU in any one subslice may be fused off for die
|
|
* recovery. BXT is expected to be perfectly uniform in EU
|
|
* distribution.
|
|
*/
|
|
info->eu_per_subslice = info->subslice_total ?
|
|
DIV_ROUND_UP(info->eu_total,
|
|
info->subslice_total) : 0;
|
|
/*
|
|
* SKL supports slice power gating on devices with more than
|
|
* one slice, and supports EU power gating on devices with
|
|
* more than one EU pair per subslice. BXT supports subslice
|
|
* power gating on devices with more than one subslice, and
|
|
* supports EU power gating on devices with more than one EU
|
|
* pair per subslice.
|
|
*/
|
|
info->has_slice_pg = (IS_SKYLAKE(dev) && (info->slice_total > 1));
|
|
info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
|
|
info->has_eu_pg = (info->eu_per_subslice > 2);
|
|
}
|
|
|
|
/*
|
|
* Determine various intel_device_info fields at runtime.
|
|
*
|
|
* Use it when either:
|
|
* - it's judged too laborious to fill n static structures with the limit
|
|
* when a simple if statement does the job,
|
|
* - run-time checks (eg read fuse/strap registers) are needed.
|
|
*
|
|
* This function needs to be called:
|
|
* - after the MMIO has been setup as we are reading registers,
|
|
* - after the PCH has been detected,
|
|
* - before the first usage of the fields it can tweak.
|
|
*/
|
|
static void intel_device_info_runtime_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_device_info *info;
|
|
enum pipe pipe;
|
|
|
|
info = (struct intel_device_info *)&dev_priv->info;
|
|
|
|
if (IS_BROXTON(dev)) {
|
|
info->num_sprites[PIPE_A] = 3;
|
|
info->num_sprites[PIPE_B] = 3;
|
|
info->num_sprites[PIPE_C] = 2;
|
|
} else if (IS_VALLEYVIEW(dev) || INTEL_INFO(dev)->gen == 9)
|
|
for_each_pipe(dev_priv, pipe)
|
|
info->num_sprites[pipe] = 2;
|
|
else
|
|
for_each_pipe(dev_priv, pipe)
|
|
info->num_sprites[pipe] = 1;
|
|
|
|
if (i915.disable_display) {
|
|
DRM_INFO("Display disabled (module parameter)\n");
|
|
info->num_pipes = 0;
|
|
} else if (info->num_pipes > 0 &&
|
|
(INTEL_INFO(dev)->gen == 7 || INTEL_INFO(dev)->gen == 8) &&
|
|
!IS_VALLEYVIEW(dev)) {
|
|
u32 fuse_strap = I915_READ(FUSE_STRAP);
|
|
u32 sfuse_strap = I915_READ(SFUSE_STRAP);
|
|
|
|
/*
|
|
* SFUSE_STRAP is supposed to have a bit signalling the display
|
|
* is fused off. Unfortunately it seems that, at least in
|
|
* certain cases, fused off display means that PCH display
|
|
* reads don't land anywhere. In that case, we read 0s.
|
|
*
|
|
* On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
|
|
* should be set when taking over after the firmware.
|
|
*/
|
|
if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
|
|
sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
|
|
(dev_priv->pch_type == PCH_CPT &&
|
|
!(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
|
|
DRM_INFO("Display fused off, disabling\n");
|
|
info->num_pipes = 0;
|
|
}
|
|
}
|
|
|
|
/* Initialize slice/subslice/EU info */
|
|
if (IS_CHERRYVIEW(dev))
|
|
cherryview_sseu_info_init(dev);
|
|
else if (INTEL_INFO(dev)->gen >= 9)
|
|
gen9_sseu_info_init(dev);
|
|
|
|
DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
|
|
DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
|
|
DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
|
|
DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
|
|
DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
|
|
DRM_DEBUG_DRIVER("has slice power gating: %s\n",
|
|
info->has_slice_pg ? "y" : "n");
|
|
DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
|
|
info->has_subslice_pg ? "y" : "n");
|
|
DRM_DEBUG_DRIVER("has EU power gating: %s\n",
|
|
info->has_eu_pg ? "y" : "n");
|
|
}
|
|
|
|
/**
|
|
* i915_driver_load - setup chip and create an initial config
|
|
* @dev: DRM device
|
|
* @flags: startup flags
|
|
*
|
|
* The driver load routine has to do several things:
|
|
* - drive output discovery via intel_modeset_init()
|
|
* - initialize the memory manager
|
|
* - allocate initial config memory
|
|
* - setup the DRM framebuffer with the allocated memory
|
|
*/
|
|
int i915_driver_load(struct drm_device *dev, unsigned long flags)
|
|
{
|
|
struct drm_i915_private *dev_priv;
|
|
struct intel_device_info *info, *device_info;
|
|
int ret = 0, mmio_bar, mmio_size;
|
|
uint32_t aperture_size;
|
|
|
|
info = (struct intel_device_info *) flags;
|
|
|
|
dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
|
|
if (dev_priv == NULL)
|
|
return -ENOMEM;
|
|
|
|
dev->dev_private = dev_priv;
|
|
dev_priv->dev = dev;
|
|
|
|
/* Setup the write-once "constant" device info */
|
|
device_info = (struct intel_device_info *)&dev_priv->info;
|
|
memcpy(device_info, info, sizeof(dev_priv->info));
|
|
device_info->device_id = dev->pdev->device;
|
|
|
|
spin_lock_init(&dev_priv->irq_lock);
|
|
spin_lock_init(&dev_priv->gpu_error.lock);
|
|
mutex_init(&dev_priv->backlight_lock);
|
|
spin_lock_init(&dev_priv->uncore.lock);
|
|
spin_lock_init(&dev_priv->mm.object_stat_lock);
|
|
spin_lock_init(&dev_priv->mmio_flip_lock);
|
|
mutex_init(&dev_priv->dpio_lock);
|
|
mutex_init(&dev_priv->modeset_restore_lock);
|
|
mutex_init(&dev_priv->csr_lock);
|
|
|
|
intel_pm_setup(dev);
|
|
|
|
intel_display_crc_init(dev);
|
|
|
|
i915_dump_device_info(dev_priv);
|
|
|
|
/* Not all pre-production machines fall into this category, only the
|
|
* very first ones. Almost everything should work, except for maybe
|
|
* suspend/resume. And we don't implement workarounds that affect only
|
|
* pre-production machines. */
|
|
if (IS_HSW_EARLY_SDV(dev))
|
|
DRM_INFO("This is an early pre-production Haswell machine. "
|
|
"It may not be fully functional.\n");
|
|
|
|
if (i915_get_bridge_dev(dev)) {
|
|
ret = -EIO;
|
|
goto free_priv;
|
|
}
|
|
|
|
mmio_bar = IS_GEN2(dev) ? 1 : 0;
|
|
/* Before gen4, the registers and the GTT are behind different BARs.
|
|
* However, from gen4 onwards, the registers and the GTT are shared
|
|
* in the same BAR, so we want to restrict this ioremap from
|
|
* clobbering the GTT which we want ioremap_wc instead. Fortunately,
|
|
* the register BAR remains the same size for all the earlier
|
|
* generations up to Ironlake.
|
|
*/
|
|
if (info->gen < 5)
|
|
mmio_size = 512*1024;
|
|
else
|
|
mmio_size = 2*1024*1024;
|
|
|
|
dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, mmio_size);
|
|
if (!dev_priv->regs) {
|
|
DRM_ERROR("failed to map registers\n");
|
|
ret = -EIO;
|
|
goto put_bridge;
|
|
}
|
|
|
|
/* This must be called before any calls to HAS_PCH_* */
|
|
intel_detect_pch(dev);
|
|
|
|
intel_uncore_init(dev);
|
|
|
|
/* Load CSR Firmware for SKL */
|
|
intel_csr_ucode_init(dev);
|
|
|
|
ret = i915_gem_gtt_init(dev);
|
|
if (ret)
|
|
goto out_freecsr;
|
|
|
|
/* WARNING: Apparently we must kick fbdev drivers before vgacon,
|
|
* otherwise the vga fbdev driver falls over. */
|
|
ret = i915_kick_out_firmware_fb(dev_priv);
|
|
if (ret) {
|
|
DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
|
|
goto out_gtt;
|
|
}
|
|
|
|
ret = i915_kick_out_vgacon(dev_priv);
|
|
if (ret) {
|
|
DRM_ERROR("failed to remove conflicting VGA console\n");
|
|
goto out_gtt;
|
|
}
|
|
|
|
pci_set_master(dev->pdev);
|
|
|
|
/* overlay on gen2 is broken and can't address above 1G */
|
|
if (IS_GEN2(dev))
|
|
dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
|
|
|
|
/* 965GM sometimes incorrectly writes to hardware status page (HWS)
|
|
* using 32bit addressing, overwriting memory if HWS is located
|
|
* above 4GB.
|
|
*
|
|
* The documentation also mentions an issue with undefined
|
|
* behaviour if any general state is accessed within a page above 4GB,
|
|
* which also needs to be handled carefully.
|
|
*/
|
|
if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
|
|
dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
|
|
|
|
aperture_size = dev_priv->gtt.mappable_end;
|
|
|
|
dev_priv->gtt.mappable =
|
|
io_mapping_create_wc(dev_priv->gtt.mappable_base,
|
|
aperture_size);
|
|
if (dev_priv->gtt.mappable == NULL) {
|
|
ret = -EIO;
|
|
goto out_gtt;
|
|
}
|
|
|
|
dev_priv->gtt.mtrr = arch_phys_wc_add(dev_priv->gtt.mappable_base,
|
|
aperture_size);
|
|
|
|
/* The i915 workqueue is primarily used for batched retirement of
|
|
* requests (and thus managing bo) once the task has been completed
|
|
* by the GPU. i915_gem_retire_requests() is called directly when we
|
|
* need high-priority retirement, such as waiting for an explicit
|
|
* bo.
|
|
*
|
|
* It is also used for periodic low-priority events, such as
|
|
* idle-timers and recording error state.
|
|
*
|
|
* All tasks on the workqueue are expected to acquire the dev mutex
|
|
* so there is no point in running more than one instance of the
|
|
* workqueue at any time. Use an ordered one.
|
|
*/
|
|
dev_priv->wq = alloc_ordered_workqueue("i915", 0);
|
|
if (dev_priv->wq == NULL) {
|
|
DRM_ERROR("Failed to create our workqueue.\n");
|
|
ret = -ENOMEM;
|
|
goto out_mtrrfree;
|
|
}
|
|
|
|
dev_priv->dp_wq = alloc_ordered_workqueue("i915-dp", 0);
|
|
if (dev_priv->dp_wq == NULL) {
|
|
DRM_ERROR("Failed to create our dp workqueue.\n");
|
|
ret = -ENOMEM;
|
|
goto out_freewq;
|
|
}
|
|
|
|
dev_priv->gpu_error.hangcheck_wq =
|
|
alloc_ordered_workqueue("i915-hangcheck", 0);
|
|
if (dev_priv->gpu_error.hangcheck_wq == NULL) {
|
|
DRM_ERROR("Failed to create our hangcheck workqueue.\n");
|
|
ret = -ENOMEM;
|
|
goto out_freedpwq;
|
|
}
|
|
|
|
intel_irq_init(dev_priv);
|
|
intel_uncore_sanitize(dev);
|
|
|
|
/* Try to make sure MCHBAR is enabled before poking at it */
|
|
intel_setup_mchbar(dev);
|
|
intel_setup_gmbus(dev);
|
|
intel_opregion_setup(dev);
|
|
|
|
intel_setup_bios(dev);
|
|
|
|
i915_gem_load(dev);
|
|
|
|
/* On the 945G/GM, the chipset reports the MSI capability on the
|
|
* integrated graphics even though the support isn't actually there
|
|
* according to the published specs. It doesn't appear to function
|
|
* correctly in testing on 945G.
|
|
* This may be a side effect of MSI having been made available for PEG
|
|
* and the registers being closely associated.
|
|
*
|
|
* According to chipset errata, on the 965GM, MSI interrupts may
|
|
* be lost or delayed, but we use them anyways to avoid
|
|
* stuck interrupts on some machines.
|
|
*/
|
|
if (!IS_I945G(dev) && !IS_I945GM(dev))
|
|
pci_enable_msi(dev->pdev);
|
|
|
|
intel_device_info_runtime_init(dev);
|
|
|
|
if (INTEL_INFO(dev)->num_pipes) {
|
|
ret = drm_vblank_init(dev, INTEL_INFO(dev)->num_pipes);
|
|
if (ret)
|
|
goto out_gem_unload;
|
|
}
|
|
|
|
intel_power_domains_init(dev_priv);
|
|
|
|
ret = i915_load_modeset_init(dev);
|
|
if (ret < 0) {
|
|
DRM_ERROR("failed to init modeset\n");
|
|
goto out_power_well;
|
|
}
|
|
|
|
/*
|
|
* Notify a valid surface after modesetting,
|
|
* when running inside a VM.
|
|
*/
|
|
if (intel_vgpu_active(dev))
|
|
I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
|
|
|
|
i915_setup_sysfs(dev);
|
|
|
|
if (INTEL_INFO(dev)->num_pipes) {
|
|
/* Must be done after probing outputs */
|
|
intel_opregion_init(dev);
|
|
acpi_video_register();
|
|
}
|
|
|
|
if (IS_GEN5(dev))
|
|
intel_gpu_ips_init(dev_priv);
|
|
|
|
intel_runtime_pm_enable(dev_priv);
|
|
|
|
i915_audio_component_init(dev_priv);
|
|
|
|
return 0;
|
|
|
|
out_power_well:
|
|
intel_power_domains_fini(dev_priv);
|
|
drm_vblank_cleanup(dev);
|
|
out_gem_unload:
|
|
WARN_ON(unregister_oom_notifier(&dev_priv->mm.oom_notifier));
|
|
unregister_shrinker(&dev_priv->mm.shrinker);
|
|
|
|
if (dev->pdev->msi_enabled)
|
|
pci_disable_msi(dev->pdev);
|
|
|
|
intel_teardown_gmbus(dev);
|
|
intel_teardown_mchbar(dev);
|
|
pm_qos_remove_request(&dev_priv->pm_qos);
|
|
destroy_workqueue(dev_priv->gpu_error.hangcheck_wq);
|
|
out_freedpwq:
|
|
destroy_workqueue(dev_priv->dp_wq);
|
|
out_freewq:
|
|
destroy_workqueue(dev_priv->wq);
|
|
out_mtrrfree:
|
|
arch_phys_wc_del(dev_priv->gtt.mtrr);
|
|
io_mapping_free(dev_priv->gtt.mappable);
|
|
out_gtt:
|
|
i915_global_gtt_cleanup(dev);
|
|
out_freecsr:
|
|
intel_csr_ucode_fini(dev);
|
|
intel_uncore_fini(dev);
|
|
pci_iounmap(dev->pdev, dev_priv->regs);
|
|
put_bridge:
|
|
pci_dev_put(dev_priv->bridge_dev);
|
|
free_priv:
|
|
if (dev_priv->requests)
|
|
kmem_cache_destroy(dev_priv->requests);
|
|
if (dev_priv->vmas)
|
|
kmem_cache_destroy(dev_priv->vmas);
|
|
if (dev_priv->objects)
|
|
kmem_cache_destroy(dev_priv->objects);
|
|
kfree(dev_priv);
|
|
return ret;
|
|
}
|
|
|
|
int i915_driver_unload(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int ret;
|
|
|
|
i915_audio_component_cleanup(dev_priv);
|
|
|
|
ret = i915_gem_suspend(dev);
|
|
if (ret) {
|
|
DRM_ERROR("failed to idle hardware: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
intel_power_domains_fini(dev_priv);
|
|
|
|
intel_gpu_ips_teardown();
|
|
|
|
i915_teardown_sysfs(dev);
|
|
|
|
WARN_ON(unregister_oom_notifier(&dev_priv->mm.oom_notifier));
|
|
unregister_shrinker(&dev_priv->mm.shrinker);
|
|
|
|
io_mapping_free(dev_priv->gtt.mappable);
|
|
arch_phys_wc_del(dev_priv->gtt.mtrr);
|
|
|
|
acpi_video_unregister();
|
|
|
|
intel_fbdev_fini(dev);
|
|
|
|
drm_vblank_cleanup(dev);
|
|
|
|
intel_modeset_cleanup(dev);
|
|
|
|
/*
|
|
* free the memory space allocated for the child device
|
|
* config parsed from VBT
|
|
*/
|
|
if (dev_priv->vbt.child_dev && dev_priv->vbt.child_dev_num) {
|
|
kfree(dev_priv->vbt.child_dev);
|
|
dev_priv->vbt.child_dev = NULL;
|
|
dev_priv->vbt.child_dev_num = 0;
|
|
}
|
|
|
|
vga_switcheroo_unregister_client(dev->pdev);
|
|
vga_client_register(dev->pdev, NULL, NULL, NULL);
|
|
|
|
/* Free error state after interrupts are fully disabled. */
|
|
cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
|
|
i915_destroy_error_state(dev);
|
|
|
|
if (dev->pdev->msi_enabled)
|
|
pci_disable_msi(dev->pdev);
|
|
|
|
intel_opregion_fini(dev);
|
|
|
|
/* Flush any outstanding unpin_work. */
|
|
flush_workqueue(dev_priv->wq);
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
i915_gem_cleanup_ringbuffer(dev);
|
|
i915_gem_context_fini(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
i915_gem_cleanup_stolen(dev);
|
|
|
|
intel_csr_ucode_fini(dev);
|
|
|
|
intel_teardown_gmbus(dev);
|
|
intel_teardown_mchbar(dev);
|
|
|
|
destroy_workqueue(dev_priv->dp_wq);
|
|
destroy_workqueue(dev_priv->wq);
|
|
destroy_workqueue(dev_priv->gpu_error.hangcheck_wq);
|
|
pm_qos_remove_request(&dev_priv->pm_qos);
|
|
|
|
i915_global_gtt_cleanup(dev);
|
|
|
|
intel_uncore_fini(dev);
|
|
if (dev_priv->regs != NULL)
|
|
pci_iounmap(dev->pdev, dev_priv->regs);
|
|
|
|
if (dev_priv->requests)
|
|
kmem_cache_destroy(dev_priv->requests);
|
|
if (dev_priv->vmas)
|
|
kmem_cache_destroy(dev_priv->vmas);
|
|
if (dev_priv->objects)
|
|
kmem_cache_destroy(dev_priv->objects);
|
|
|
|
pci_dev_put(dev_priv->bridge_dev);
|
|
kfree(dev_priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i915_driver_open(struct drm_device *dev, struct drm_file *file)
|
|
{
|
|
int ret;
|
|
|
|
ret = i915_gem_open(dev, file);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i915_driver_lastclose - clean up after all DRM clients have exited
|
|
* @dev: DRM device
|
|
*
|
|
* Take care of cleaning up after all DRM clients have exited. In the
|
|
* mode setting case, we want to restore the kernel's initial mode (just
|
|
* in case the last client left us in a bad state).
|
|
*
|
|
* Additionally, in the non-mode setting case, we'll tear down the GTT
|
|
* and DMA structures, since the kernel won't be using them, and clea
|
|
* up any GEM state.
|
|
*/
|
|
void i915_driver_lastclose(struct drm_device *dev)
|
|
{
|
|
intel_fbdev_restore_mode(dev);
|
|
vga_switcheroo_process_delayed_switch();
|
|
}
|
|
|
|
void i915_driver_preclose(struct drm_device *dev, struct drm_file *file)
|
|
{
|
|
mutex_lock(&dev->struct_mutex);
|
|
i915_gem_context_close(dev, file);
|
|
i915_gem_release(dev, file);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
intel_modeset_preclose(dev, file);
|
|
}
|
|
|
|
void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
|
|
{
|
|
struct drm_i915_file_private *file_priv = file->driver_priv;
|
|
|
|
if (file_priv && file_priv->bsd_ring)
|
|
file_priv->bsd_ring = NULL;
|
|
kfree(file_priv);
|
|
}
|
|
|
|
static int
|
|
i915_gem_reject_pin_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
const struct drm_ioctl_desc i915_ioctls[] = {
|
|
DRM_IOCTL_DEF_DRV(I915_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_FLUSH, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_FLIP, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_SETPARAM, i915_setparam, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH|DRM_UNLOCKED),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, DRM_UNLOCKED),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
|
|
DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
|
|
DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
|
|
DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_get_reset_stats_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_GETPARAM, i915_gem_context_getparam_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_SETPARAM, i915_gem_context_setparam_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
};
|
|
|
|
int i915_max_ioctl = ARRAY_SIZE(i915_ioctls);
|
|
|
|
/*
|
|
* This is really ugly: Because old userspace abused the linux agp interface to
|
|
* manage the gtt, we need to claim that all intel devices are agp. For
|
|
* otherwise the drm core refuses to initialize the agp support code.
|
|
*/
|
|
int i915_driver_device_is_agp(struct drm_device *dev)
|
|
{
|
|
return 1;
|
|
}
|