linux_dsm_epyc7002/mm/workingset.c
Vladimir Davydov 3f97b16320 list_lru: add helpers to isolate items
Currently, the isolate callback passed to the list_lru_walk family of
functions is supposed to just delete an item from the list upon returning
LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by
__list_lru_walk_one after the callback returns.  Since the callback is
allowed to drop the lock after removing an item (it has to return
LRU_REMOVED_RETRY then), the nr_items can be less than the actual number
of elements on the list even if we check them under the lock.  This makes
it difficult to move items from one list_lru_one to another, which is
required for per-memcg list_lru reparenting - we can't just splice the
lists, we have to move entries one by one.

This patch therefore introduces helpers that must be used by callback
functions to isolate items instead of raw list_del/list_move.  These are
list_lru_isolate and list_lru_isolate_move.  They not only remove the
entry from the list, but also fix the nr_items counter, making sure
nr_items always reflects the actual number of elements on the list if
checked under the appropriate lock.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:10 -08:00

416 lines
14 KiB
C

/*
* Workingset detection
*
* Copyright (C) 2013 Red Hat, Inc., Johannes Weiner
*/
#include <linux/memcontrol.h>
#include <linux/writeback.h>
#include <linux/pagemap.h>
#include <linux/atomic.h>
#include <linux/module.h>
#include <linux/swap.h>
#include <linux/fs.h>
#include <linux/mm.h>
/*
* Double CLOCK lists
*
* Per zone, two clock lists are maintained for file pages: the
* inactive and the active list. Freshly faulted pages start out at
* the head of the inactive list and page reclaim scans pages from the
* tail. Pages that are accessed multiple times on the inactive list
* are promoted to the active list, to protect them from reclaim,
* whereas active pages are demoted to the inactive list when the
* active list grows too big.
*
* fault ------------------------+
* |
* +--------------+ | +-------------+
* reclaim <- | inactive | <-+-- demotion | active | <--+
* +--------------+ +-------------+ |
* | |
* +-------------- promotion ------------------+
*
*
* Access frequency and refault distance
*
* A workload is thrashing when its pages are frequently used but they
* are evicted from the inactive list every time before another access
* would have promoted them to the active list.
*
* In cases where the average access distance between thrashing pages
* is bigger than the size of memory there is nothing that can be
* done - the thrashing set could never fit into memory under any
* circumstance.
*
* However, the average access distance could be bigger than the
* inactive list, yet smaller than the size of memory. In this case,
* the set could fit into memory if it weren't for the currently
* active pages - which may be used more, hopefully less frequently:
*
* +-memory available to cache-+
* | |
* +-inactive------+-active----+
* a b | c d e f g h i | J K L M N |
* +---------------+-----------+
*
* It is prohibitively expensive to accurately track access frequency
* of pages. But a reasonable approximation can be made to measure
* thrashing on the inactive list, after which refaulting pages can be
* activated optimistically to compete with the existing active pages.
*
* Approximating inactive page access frequency - Observations:
*
* 1. When a page is accessed for the first time, it is added to the
* head of the inactive list, slides every existing inactive page
* towards the tail by one slot, and pushes the current tail page
* out of memory.
*
* 2. When a page is accessed for the second time, it is promoted to
* the active list, shrinking the inactive list by one slot. This
* also slides all inactive pages that were faulted into the cache
* more recently than the activated page towards the tail of the
* inactive list.
*
* Thus:
*
* 1. The sum of evictions and activations between any two points in
* time indicate the minimum number of inactive pages accessed in
* between.
*
* 2. Moving one inactive page N page slots towards the tail of the
* list requires at least N inactive page accesses.
*
* Combining these:
*
* 1. When a page is finally evicted from memory, the number of
* inactive pages accessed while the page was in cache is at least
* the number of page slots on the inactive list.
*
* 2. In addition, measuring the sum of evictions and activations (E)
* at the time of a page's eviction, and comparing it to another
* reading (R) at the time the page faults back into memory tells
* the minimum number of accesses while the page was not cached.
* This is called the refault distance.
*
* Because the first access of the page was the fault and the second
* access the refault, we combine the in-cache distance with the
* out-of-cache distance to get the complete minimum access distance
* of this page:
*
* NR_inactive + (R - E)
*
* And knowing the minimum access distance of a page, we can easily
* tell if the page would be able to stay in cache assuming all page
* slots in the cache were available:
*
* NR_inactive + (R - E) <= NR_inactive + NR_active
*
* which can be further simplified to
*
* (R - E) <= NR_active
*
* Put into words, the refault distance (out-of-cache) can be seen as
* a deficit in inactive list space (in-cache). If the inactive list
* had (R - E) more page slots, the page would not have been evicted
* in between accesses, but activated instead. And on a full system,
* the only thing eating into inactive list space is active pages.
*
*
* Activating refaulting pages
*
* All that is known about the active list is that the pages have been
* accessed more than once in the past. This means that at any given
* time there is actually a good chance that pages on the active list
* are no longer in active use.
*
* So when a refault distance of (R - E) is observed and there are at
* least (R - E) active pages, the refaulting page is activated
* optimistically in the hope that (R - E) active pages are actually
* used less frequently than the refaulting page - or even not used at
* all anymore.
*
* If this is wrong and demotion kicks in, the pages which are truly
* used more frequently will be reactivated while the less frequently
* used once will be evicted from memory.
*
* But if this is right, the stale pages will be pushed out of memory
* and the used pages get to stay in cache.
*
*
* Implementation
*
* For each zone's file LRU lists, a counter for inactive evictions
* and activations is maintained (zone->inactive_age).
*
* On eviction, a snapshot of this counter (along with some bits to
* identify the zone) is stored in the now empty page cache radix tree
* slot of the evicted page. This is called a shadow entry.
*
* On cache misses for which there are shadow entries, an eligible
* refault distance will immediately activate the refaulting page.
*/
static void *pack_shadow(unsigned long eviction, struct zone *zone)
{
eviction = (eviction << NODES_SHIFT) | zone_to_nid(zone);
eviction = (eviction << ZONES_SHIFT) | zone_idx(zone);
eviction = (eviction << RADIX_TREE_EXCEPTIONAL_SHIFT);
return (void *)(eviction | RADIX_TREE_EXCEPTIONAL_ENTRY);
}
static void unpack_shadow(void *shadow,
struct zone **zone,
unsigned long *distance)
{
unsigned long entry = (unsigned long)shadow;
unsigned long eviction;
unsigned long refault;
unsigned long mask;
int zid, nid;
entry >>= RADIX_TREE_EXCEPTIONAL_SHIFT;
zid = entry & ((1UL << ZONES_SHIFT) - 1);
entry >>= ZONES_SHIFT;
nid = entry & ((1UL << NODES_SHIFT) - 1);
entry >>= NODES_SHIFT;
eviction = entry;
*zone = NODE_DATA(nid)->node_zones + zid;
refault = atomic_long_read(&(*zone)->inactive_age);
mask = ~0UL >> (NODES_SHIFT + ZONES_SHIFT +
RADIX_TREE_EXCEPTIONAL_SHIFT);
/*
* The unsigned subtraction here gives an accurate distance
* across inactive_age overflows in most cases.
*
* There is a special case: usually, shadow entries have a
* short lifetime and are either refaulted or reclaimed along
* with the inode before they get too old. But it is not
* impossible for the inactive_age to lap a shadow entry in
* the field, which can then can result in a false small
* refault distance, leading to a false activation should this
* old entry actually refault again. However, earlier kernels
* used to deactivate unconditionally with *every* reclaim
* invocation for the longest time, so the occasional
* inappropriate activation leading to pressure on the active
* list is not a problem.
*/
*distance = (refault - eviction) & mask;
}
/**
* workingset_eviction - note the eviction of a page from memory
* @mapping: address space the page was backing
* @page: the page being evicted
*
* Returns a shadow entry to be stored in @mapping->page_tree in place
* of the evicted @page so that a later refault can be detected.
*/
void *workingset_eviction(struct address_space *mapping, struct page *page)
{
struct zone *zone = page_zone(page);
unsigned long eviction;
eviction = atomic_long_inc_return(&zone->inactive_age);
return pack_shadow(eviction, zone);
}
/**
* workingset_refault - evaluate the refault of a previously evicted page
* @shadow: shadow entry of the evicted page
*
* Calculates and evaluates the refault distance of the previously
* evicted page in the context of the zone it was allocated in.
*
* Returns %true if the page should be activated, %false otherwise.
*/
bool workingset_refault(void *shadow)
{
unsigned long refault_distance;
struct zone *zone;
unpack_shadow(shadow, &zone, &refault_distance);
inc_zone_state(zone, WORKINGSET_REFAULT);
if (refault_distance <= zone_page_state(zone, NR_ACTIVE_FILE)) {
inc_zone_state(zone, WORKINGSET_ACTIVATE);
return true;
}
return false;
}
/**
* workingset_activation - note a page activation
* @page: page that is being activated
*/
void workingset_activation(struct page *page)
{
atomic_long_inc(&page_zone(page)->inactive_age);
}
/*
* Shadow entries reflect the share of the working set that does not
* fit into memory, so their number depends on the access pattern of
* the workload. In most cases, they will refault or get reclaimed
* along with the inode, but a (malicious) workload that streams
* through files with a total size several times that of available
* memory, while preventing the inodes from being reclaimed, can
* create excessive amounts of shadow nodes. To keep a lid on this,
* track shadow nodes and reclaim them when they grow way past the
* point where they would still be useful.
*/
struct list_lru workingset_shadow_nodes;
static unsigned long count_shadow_nodes(struct shrinker *shrinker,
struct shrink_control *sc)
{
unsigned long shadow_nodes;
unsigned long max_nodes;
unsigned long pages;
/* list_lru lock nests inside IRQ-safe mapping->tree_lock */
local_irq_disable();
shadow_nodes = list_lru_shrink_count(&workingset_shadow_nodes, sc);
local_irq_enable();
pages = node_present_pages(sc->nid);
/*
* Active cache pages are limited to 50% of memory, and shadow
* entries that represent a refault distance bigger than that
* do not have any effect. Limit the number of shadow nodes
* such that shadow entries do not exceed the number of active
* cache pages, assuming a worst-case node population density
* of 1/8th on average.
*
* On 64-bit with 7 radix_tree_nodes per page and 64 slots
* each, this will reclaim shadow entries when they consume
* ~2% of available memory:
*
* PAGE_SIZE / radix_tree_nodes / node_entries / PAGE_SIZE
*/
max_nodes = pages >> (1 + RADIX_TREE_MAP_SHIFT - 3);
if (shadow_nodes <= max_nodes)
return 0;
return shadow_nodes - max_nodes;
}
static enum lru_status shadow_lru_isolate(struct list_head *item,
struct list_lru_one *lru,
spinlock_t *lru_lock,
void *arg)
{
struct address_space *mapping;
struct radix_tree_node *node;
unsigned int i;
int ret;
/*
* Page cache insertions and deletions synchroneously maintain
* the shadow node LRU under the mapping->tree_lock and the
* lru_lock. Because the page cache tree is emptied before
* the inode can be destroyed, holding the lru_lock pins any
* address_space that has radix tree nodes on the LRU.
*
* We can then safely transition to the mapping->tree_lock to
* pin only the address_space of the particular node we want
* to reclaim, take the node off-LRU, and drop the lru_lock.
*/
node = container_of(item, struct radix_tree_node, private_list);
mapping = node->private_data;
/* Coming from the list, invert the lock order */
if (!spin_trylock(&mapping->tree_lock)) {
spin_unlock(lru_lock);
ret = LRU_RETRY;
goto out;
}
list_lru_isolate(lru, item);
spin_unlock(lru_lock);
/*
* The nodes should only contain one or more shadow entries,
* no pages, so we expect to be able to remove them all and
* delete and free the empty node afterwards.
*/
BUG_ON(!node->count);
BUG_ON(node->count & RADIX_TREE_COUNT_MASK);
for (i = 0; i < RADIX_TREE_MAP_SIZE; i++) {
if (node->slots[i]) {
BUG_ON(!radix_tree_exceptional_entry(node->slots[i]));
node->slots[i] = NULL;
BUG_ON(node->count < (1U << RADIX_TREE_COUNT_SHIFT));
node->count -= 1U << RADIX_TREE_COUNT_SHIFT;
BUG_ON(!mapping->nrshadows);
mapping->nrshadows--;
}
}
BUG_ON(node->count);
inc_zone_state(page_zone(virt_to_page(node)), WORKINGSET_NODERECLAIM);
if (!__radix_tree_delete_node(&mapping->page_tree, node))
BUG();
spin_unlock(&mapping->tree_lock);
ret = LRU_REMOVED_RETRY;
out:
local_irq_enable();
cond_resched();
local_irq_disable();
spin_lock(lru_lock);
return ret;
}
static unsigned long scan_shadow_nodes(struct shrinker *shrinker,
struct shrink_control *sc)
{
unsigned long ret;
/* list_lru lock nests inside IRQ-safe mapping->tree_lock */
local_irq_disable();
ret = list_lru_shrink_walk(&workingset_shadow_nodes, sc,
shadow_lru_isolate, NULL);
local_irq_enable();
return ret;
}
static struct shrinker workingset_shadow_shrinker = {
.count_objects = count_shadow_nodes,
.scan_objects = scan_shadow_nodes,
.seeks = DEFAULT_SEEKS,
.flags = SHRINKER_NUMA_AWARE,
};
/*
* Our list_lru->lock is IRQ-safe as it nests inside the IRQ-safe
* mapping->tree_lock.
*/
static struct lock_class_key shadow_nodes_key;
static int __init workingset_init(void)
{
int ret;
ret = list_lru_init_key(&workingset_shadow_nodes, &shadow_nodes_key);
if (ret)
goto err;
ret = register_shrinker(&workingset_shadow_shrinker);
if (ret)
goto err_list_lru;
return 0;
err_list_lru:
list_lru_destroy(&workingset_shadow_nodes);
err:
return ret;
}
module_init(workingset_init);