mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 23:56:44 +07:00
850ba84b5c
Fix the warnings when using the W=1 compiler flag. sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_reset’: sound/soc/codecs/tlv320adcx140.c:570:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] 570 | int ret = 0; | ^~~ This was set but only used in case where the reset GPIO is not defined. Have the function return the value of ret. sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_codec_probe’: sound/soc/codecs/tlv320adcx140.c:778:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 778 | if (bias_source < ADCX140_MIC_BIAS_VAL_VREF || | ^ sound/soc/codecs/tlv320adcx140.c:789:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 789 | if (vref_source < ADCX140_MIC_BIAS_VREF_275V || This condition will not occur since if the dt property is not set then the *_source variable is set to the default value. So there is no way that *_source can be less then 0. Which is what each #define is set to. The code just needs to make sure that the dt property is not out of the upper bounds. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200526175247.15309-1-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
989 lines
30 KiB
C
989 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// TLV320ADCX140 Sound driver
|
|
// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "tlv320adcx140.h"
|
|
|
|
struct adcx140_priv {
|
|
struct snd_soc_component *component;
|
|
struct regulator *supply_areg;
|
|
struct gpio_desc *gpio_reset;
|
|
struct regmap *regmap;
|
|
struct device *dev;
|
|
|
|
int micbias_vg;
|
|
|
|
unsigned int dai_fmt;
|
|
unsigned int tdm_delay;
|
|
unsigned int slot_width;
|
|
};
|
|
|
|
static const struct reg_default adcx140_reg_defaults[] = {
|
|
{ ADCX140_PAGE_SELECT, 0x00 },
|
|
{ ADCX140_SW_RESET, 0x00 },
|
|
{ ADCX140_SLEEP_CFG, 0x00 },
|
|
{ ADCX140_SHDN_CFG, 0x05 },
|
|
{ ADCX140_ASI_CFG0, 0x30 },
|
|
{ ADCX140_ASI_CFG1, 0x00 },
|
|
{ ADCX140_ASI_CFG2, 0x00 },
|
|
{ ADCX140_ASI_CH1, 0x00 },
|
|
{ ADCX140_ASI_CH2, 0x01 },
|
|
{ ADCX140_ASI_CH3, 0x02 },
|
|
{ ADCX140_ASI_CH4, 0x03 },
|
|
{ ADCX140_ASI_CH5, 0x04 },
|
|
{ ADCX140_ASI_CH6, 0x05 },
|
|
{ ADCX140_ASI_CH7, 0x06 },
|
|
{ ADCX140_ASI_CH8, 0x07 },
|
|
{ ADCX140_MST_CFG0, 0x02 },
|
|
{ ADCX140_MST_CFG1, 0x48 },
|
|
{ ADCX140_ASI_STS, 0xff },
|
|
{ ADCX140_CLK_SRC, 0x10 },
|
|
{ ADCX140_PDMCLK_CFG, 0x40 },
|
|
{ ADCX140_PDM_CFG, 0x00 },
|
|
{ ADCX140_GPIO_CFG0, 0x22 },
|
|
{ ADCX140_GPO_CFG1, 0x00 },
|
|
{ ADCX140_GPO_CFG2, 0x00 },
|
|
{ ADCX140_GPO_CFG3, 0x00 },
|
|
{ ADCX140_GPO_CFG4, 0x00 },
|
|
{ ADCX140_GPO_VAL, 0x00 },
|
|
{ ADCX140_GPIO_MON, 0x00 },
|
|
{ ADCX140_GPI_CFG0, 0x00 },
|
|
{ ADCX140_GPI_CFG1, 0x00 },
|
|
{ ADCX140_GPI_MON, 0x00 },
|
|
{ ADCX140_INT_CFG, 0x00 },
|
|
{ ADCX140_INT_MASK0, 0xff },
|
|
{ ADCX140_INT_LTCH0, 0x00 },
|
|
{ ADCX140_BIAS_CFG, 0x00 },
|
|
{ ADCX140_CH1_CFG0, 0x00 },
|
|
{ ADCX140_CH1_CFG1, 0x00 },
|
|
{ ADCX140_CH1_CFG2, 0xc9 },
|
|
{ ADCX140_CH1_CFG3, 0x80 },
|
|
{ ADCX140_CH1_CFG4, 0x00 },
|
|
{ ADCX140_CH2_CFG0, 0x00 },
|
|
{ ADCX140_CH2_CFG1, 0x00 },
|
|
{ ADCX140_CH2_CFG2, 0xc9 },
|
|
{ ADCX140_CH2_CFG3, 0x80 },
|
|
{ ADCX140_CH2_CFG4, 0x00 },
|
|
{ ADCX140_CH3_CFG0, 0x00 },
|
|
{ ADCX140_CH3_CFG1, 0x00 },
|
|
{ ADCX140_CH3_CFG2, 0xc9 },
|
|
{ ADCX140_CH3_CFG3, 0x80 },
|
|
{ ADCX140_CH3_CFG4, 0x00 },
|
|
{ ADCX140_CH4_CFG0, 0x00 },
|
|
{ ADCX140_CH4_CFG1, 0x00 },
|
|
{ ADCX140_CH4_CFG2, 0xc9 },
|
|
{ ADCX140_CH4_CFG3, 0x80 },
|
|
{ ADCX140_CH4_CFG4, 0x00 },
|
|
{ ADCX140_CH5_CFG2, 0xc9 },
|
|
{ ADCX140_CH5_CFG3, 0x80 },
|
|
{ ADCX140_CH5_CFG4, 0x00 },
|
|
{ ADCX140_CH6_CFG2, 0xc9 },
|
|
{ ADCX140_CH6_CFG3, 0x80 },
|
|
{ ADCX140_CH6_CFG4, 0x00 },
|
|
{ ADCX140_CH7_CFG2, 0xc9 },
|
|
{ ADCX140_CH7_CFG3, 0x80 },
|
|
{ ADCX140_CH7_CFG4, 0x00 },
|
|
{ ADCX140_CH8_CFG2, 0xc9 },
|
|
{ ADCX140_CH8_CFG3, 0x80 },
|
|
{ ADCX140_CH8_CFG4, 0x00 },
|
|
{ ADCX140_DSP_CFG0, 0x01 },
|
|
{ ADCX140_DSP_CFG1, 0x40 },
|
|
{ ADCX140_DRE_CFG0, 0x7b },
|
|
{ ADCX140_AGC_CFG0, 0xe7 },
|
|
{ ADCX140_IN_CH_EN, 0xf0 },
|
|
{ ADCX140_ASI_OUT_CH_EN, 0x00 },
|
|
{ ADCX140_PWR_CFG, 0x00 },
|
|
{ ADCX140_DEV_STS0, 0x00 },
|
|
{ ADCX140_DEV_STS1, 0x80 },
|
|
};
|
|
|
|
static const struct regmap_range_cfg adcx140_ranges[] = {
|
|
{
|
|
.range_min = 0,
|
|
.range_max = 12 * 128,
|
|
.selector_reg = ADCX140_PAGE_SELECT,
|
|
.selector_mask = 0xff,
|
|
.selector_shift = 0,
|
|
.window_start = 0,
|
|
.window_len = 128,
|
|
},
|
|
};
|
|
|
|
static bool adcx140_volatile(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case ADCX140_SW_RESET:
|
|
case ADCX140_DEV_STS0:
|
|
case ADCX140_DEV_STS1:
|
|
case ADCX140_ASI_STS:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config adcx140_i2c_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.reg_defaults = adcx140_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(adcx140_reg_defaults),
|
|
.cache_type = REGCACHE_FLAT,
|
|
.ranges = adcx140_ranges,
|
|
.num_ranges = ARRAY_SIZE(adcx140_ranges),
|
|
.max_register = 12 * 128,
|
|
.volatile_reg = adcx140_volatile,
|
|
};
|
|
|
|
/* Digital Volume control. From -100 to 27 dB in 0.5 dB steps */
|
|
static DECLARE_TLV_DB_SCALE(dig_vol_tlv, -10000, 50, 0);
|
|
|
|
/* ADC gain. From 0 to 42 dB in 1 dB steps */
|
|
static DECLARE_TLV_DB_SCALE(adc_tlv, 0, 100, 0);
|
|
|
|
/* DRE Level. From -12 dB to -66 dB in 1 dB steps */
|
|
static DECLARE_TLV_DB_SCALE(dre_thresh_tlv, -6600, 100, 0);
|
|
/* DRE Max Gain. From 2 dB to 26 dB in 2 dB steps */
|
|
static DECLARE_TLV_DB_SCALE(dre_gain_tlv, 200, 200, 0);
|
|
|
|
/* AGC Level. From -6 dB to -36 dB in 2 dB steps */
|
|
static DECLARE_TLV_DB_SCALE(agc_thresh_tlv, -3600, 200, 0);
|
|
/* AGC Max Gain. From 3 dB to 42 dB in 3 dB steps */
|
|
static DECLARE_TLV_DB_SCALE(agc_gain_tlv, 300, 300, 0);
|
|
|
|
static const char * const decimation_filter_text[] = {
|
|
"Linear Phase", "Low Latency", "Ultra-low Latency"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(decimation_filter_enum, ADCX140_DSP_CFG0, 4,
|
|
decimation_filter_text);
|
|
|
|
static const struct snd_kcontrol_new decimation_filter_controls[] = {
|
|
SOC_DAPM_ENUM("Decimation Filter", decimation_filter_enum),
|
|
};
|
|
|
|
static const char * const pdmclk_text[] = {
|
|
"2.8224 MHz", "1.4112 MHz", "705.6 kHz", "5.6448 MHz"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(pdmclk_select_enum, ADCX140_PDMCLK_CFG, 0,
|
|
pdmclk_text);
|
|
|
|
static const struct snd_kcontrol_new pdmclk_div_controls[] = {
|
|
SOC_DAPM_ENUM("PDM Clk Divider Select", pdmclk_select_enum),
|
|
};
|
|
|
|
static const char * const resistor_text[] = {
|
|
"2.5 kOhm", "10 kOhm", "20 kOhm"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(in1_resistor_enum, ADCX140_CH1_CFG0, 2,
|
|
resistor_text);
|
|
static SOC_ENUM_SINGLE_DECL(in2_resistor_enum, ADCX140_CH2_CFG0, 2,
|
|
resistor_text);
|
|
static SOC_ENUM_SINGLE_DECL(in3_resistor_enum, ADCX140_CH3_CFG0, 2,
|
|
resistor_text);
|
|
static SOC_ENUM_SINGLE_DECL(in4_resistor_enum, ADCX140_CH4_CFG0, 2,
|
|
resistor_text);
|
|
|
|
static const struct snd_kcontrol_new in1_resistor_controls[] = {
|
|
SOC_DAPM_ENUM("CH1 Resistor Select", in1_resistor_enum),
|
|
};
|
|
static const struct snd_kcontrol_new in2_resistor_controls[] = {
|
|
SOC_DAPM_ENUM("CH2 Resistor Select", in2_resistor_enum),
|
|
};
|
|
static const struct snd_kcontrol_new in3_resistor_controls[] = {
|
|
SOC_DAPM_ENUM("CH3 Resistor Select", in3_resistor_enum),
|
|
};
|
|
static const struct snd_kcontrol_new in4_resistor_controls[] = {
|
|
SOC_DAPM_ENUM("CH4 Resistor Select", in4_resistor_enum),
|
|
};
|
|
|
|
/* Analog/Digital Selection */
|
|
static const char *adcx140_mic_sel_text[] = {"Analog", "Line In", "Digital"};
|
|
static const char *adcx140_analog_sel_text[] = {"Analog", "Line In"};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic1p_enum,
|
|
ADCX140_CH1_CFG0, 5,
|
|
adcx140_mic_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic1p_control =
|
|
SOC_DAPM_ENUM("MIC1P MUX", adcx140_mic1p_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic1_analog_enum,
|
|
ADCX140_CH1_CFG0, 7,
|
|
adcx140_analog_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic1_analog_control =
|
|
SOC_DAPM_ENUM("MIC1 Analog MUX", adcx140_mic1_analog_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic1m_enum,
|
|
ADCX140_CH1_CFG0, 5,
|
|
adcx140_mic_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic1m_control =
|
|
SOC_DAPM_ENUM("MIC1M MUX", adcx140_mic1m_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic2p_enum,
|
|
ADCX140_CH2_CFG0, 5,
|
|
adcx140_mic_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic2p_control =
|
|
SOC_DAPM_ENUM("MIC2P MUX", adcx140_mic2p_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic2_analog_enum,
|
|
ADCX140_CH2_CFG0, 7,
|
|
adcx140_analog_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic2_analog_control =
|
|
SOC_DAPM_ENUM("MIC2 Analog MUX", adcx140_mic2_analog_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic2m_enum,
|
|
ADCX140_CH2_CFG0, 5,
|
|
adcx140_mic_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic2m_control =
|
|
SOC_DAPM_ENUM("MIC2M MUX", adcx140_mic2m_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic3p_enum,
|
|
ADCX140_CH3_CFG0, 5,
|
|
adcx140_mic_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic3p_control =
|
|
SOC_DAPM_ENUM("MIC3P MUX", adcx140_mic3p_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic3_analog_enum,
|
|
ADCX140_CH3_CFG0, 7,
|
|
adcx140_analog_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic3_analog_control =
|
|
SOC_DAPM_ENUM("MIC3 Analog MUX", adcx140_mic3_analog_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic3m_enum,
|
|
ADCX140_CH3_CFG0, 5,
|
|
adcx140_mic_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic3m_control =
|
|
SOC_DAPM_ENUM("MIC3M MUX", adcx140_mic3m_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic4p_enum,
|
|
ADCX140_CH4_CFG0, 5,
|
|
adcx140_mic_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic4p_control =
|
|
SOC_DAPM_ENUM("MIC4P MUX", adcx140_mic4p_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic4_analog_enum,
|
|
ADCX140_CH4_CFG0, 7,
|
|
adcx140_analog_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic4_analog_control =
|
|
SOC_DAPM_ENUM("MIC4 Analog MUX", adcx140_mic4_analog_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adcx140_mic4m_enum,
|
|
ADCX140_CH4_CFG0, 5,
|
|
adcx140_mic_sel_text);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_mic4m_control =
|
|
SOC_DAPM_ENUM("MIC4M MUX", adcx140_mic4m_enum);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_ch1_en_switch =
|
|
SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 7, 1, 0);
|
|
static const struct snd_kcontrol_new adcx140_dapm_ch2_en_switch =
|
|
SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 6, 1, 0);
|
|
static const struct snd_kcontrol_new adcx140_dapm_ch3_en_switch =
|
|
SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 5, 1, 0);
|
|
static const struct snd_kcontrol_new adcx140_dapm_ch4_en_switch =
|
|
SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 4, 1, 0);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_ch1_dre_en_switch =
|
|
SOC_DAPM_SINGLE("Switch", ADCX140_CH1_CFG0, 0, 1, 0);
|
|
static const struct snd_kcontrol_new adcx140_dapm_ch2_dre_en_switch =
|
|
SOC_DAPM_SINGLE("Switch", ADCX140_CH2_CFG0, 0, 1, 0);
|
|
static const struct snd_kcontrol_new adcx140_dapm_ch3_dre_en_switch =
|
|
SOC_DAPM_SINGLE("Switch", ADCX140_CH3_CFG0, 0, 1, 0);
|
|
static const struct snd_kcontrol_new adcx140_dapm_ch4_dre_en_switch =
|
|
SOC_DAPM_SINGLE("Switch", ADCX140_CH4_CFG0, 0, 1, 0);
|
|
|
|
static const struct snd_kcontrol_new adcx140_dapm_dre_en_switch =
|
|
SOC_DAPM_SINGLE("Switch", ADCX140_DSP_CFG1, 3, 1, 0);
|
|
|
|
/* Output Mixer */
|
|
static const struct snd_kcontrol_new adcx140_output_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("Digital CH1 Switch", 0, 0, 0, 0),
|
|
SOC_DAPM_SINGLE("Digital CH2 Switch", 0, 0, 0, 0),
|
|
SOC_DAPM_SINGLE("Digital CH3 Switch", 0, 0, 0, 0),
|
|
SOC_DAPM_SINGLE("Digital CH4 Switch", 0, 0, 0, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget adcx140_dapm_widgets[] = {
|
|
/* Analog Differential Inputs */
|
|
SND_SOC_DAPM_INPUT("MIC1P"),
|
|
SND_SOC_DAPM_INPUT("MIC1M"),
|
|
SND_SOC_DAPM_INPUT("MIC2P"),
|
|
SND_SOC_DAPM_INPUT("MIC2M"),
|
|
SND_SOC_DAPM_INPUT("MIC3P"),
|
|
SND_SOC_DAPM_INPUT("MIC3M"),
|
|
SND_SOC_DAPM_INPUT("MIC4P"),
|
|
SND_SOC_DAPM_INPUT("MIC4M"),
|
|
|
|
SND_SOC_DAPM_OUTPUT("CH1_OUT"),
|
|
SND_SOC_DAPM_OUTPUT("CH2_OUT"),
|
|
SND_SOC_DAPM_OUTPUT("CH3_OUT"),
|
|
SND_SOC_DAPM_OUTPUT("CH4_OUT"),
|
|
SND_SOC_DAPM_OUTPUT("CH5_OUT"),
|
|
SND_SOC_DAPM_OUTPUT("CH6_OUT"),
|
|
SND_SOC_DAPM_OUTPUT("CH7_OUT"),
|
|
SND_SOC_DAPM_OUTPUT("CH8_OUT"),
|
|
|
|
SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_output_mixer_controls[0],
|
|
ARRAY_SIZE(adcx140_output_mixer_controls)),
|
|
|
|
/* Input Selection to MIC_PGA */
|
|
SND_SOC_DAPM_MUX("MIC1P Input Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic1p_control),
|
|
SND_SOC_DAPM_MUX("MIC2P Input Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic2p_control),
|
|
SND_SOC_DAPM_MUX("MIC3P Input Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic3p_control),
|
|
SND_SOC_DAPM_MUX("MIC4P Input Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic4p_control),
|
|
|
|
/* Input Selection to MIC_PGA */
|
|
SND_SOC_DAPM_MUX("MIC1 Analog Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic1_analog_control),
|
|
SND_SOC_DAPM_MUX("MIC2 Analog Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic2_analog_control),
|
|
SND_SOC_DAPM_MUX("MIC3 Analog Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic3_analog_control),
|
|
SND_SOC_DAPM_MUX("MIC4 Analog Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic4_analog_control),
|
|
|
|
SND_SOC_DAPM_MUX("MIC1M Input Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic1m_control),
|
|
SND_SOC_DAPM_MUX("MIC2M Input Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic2m_control),
|
|
SND_SOC_DAPM_MUX("MIC3M Input Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic3m_control),
|
|
SND_SOC_DAPM_MUX("MIC4M Input Mux", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_mic4m_control),
|
|
|
|
SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH1", SND_SOC_NOPM, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH2", SND_SOC_NOPM, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH3", SND_SOC_NOPM, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH4", SND_SOC_NOPM, 0, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_ADC("CH1_ADC", "CH1 Capture", ADCX140_IN_CH_EN, 7, 0),
|
|
SND_SOC_DAPM_ADC("CH2_ADC", "CH2 Capture", ADCX140_IN_CH_EN, 6, 0),
|
|
SND_SOC_DAPM_ADC("CH3_ADC", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0),
|
|
SND_SOC_DAPM_ADC("CH4_ADC", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0),
|
|
|
|
SND_SOC_DAPM_SWITCH("CH1_ASI_EN", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_ch1_en_switch),
|
|
SND_SOC_DAPM_SWITCH("CH2_ASI_EN", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_ch2_en_switch),
|
|
SND_SOC_DAPM_SWITCH("CH3_ASI_EN", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_ch3_en_switch),
|
|
SND_SOC_DAPM_SWITCH("CH4_ASI_EN", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_ch4_en_switch),
|
|
|
|
SND_SOC_DAPM_SWITCH("DRE_ENABLE", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_dre_en_switch),
|
|
|
|
SND_SOC_DAPM_SWITCH("CH1_DRE_EN", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_ch1_dre_en_switch),
|
|
SND_SOC_DAPM_SWITCH("CH2_DRE_EN", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_ch2_dre_en_switch),
|
|
SND_SOC_DAPM_SWITCH("CH3_DRE_EN", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_ch3_dre_en_switch),
|
|
SND_SOC_DAPM_SWITCH("CH4_DRE_EN", SND_SOC_NOPM, 0, 0,
|
|
&adcx140_dapm_ch4_dre_en_switch),
|
|
|
|
SND_SOC_DAPM_MUX("IN1 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
|
|
in1_resistor_controls),
|
|
SND_SOC_DAPM_MUX("IN2 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
|
|
in2_resistor_controls),
|
|
SND_SOC_DAPM_MUX("IN3 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
|
|
in3_resistor_controls),
|
|
SND_SOC_DAPM_MUX("IN4 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
|
|
in4_resistor_controls),
|
|
|
|
SND_SOC_DAPM_MUX("PDM Clk Div Select", SND_SOC_NOPM, 0, 0,
|
|
pdmclk_div_controls),
|
|
|
|
SND_SOC_DAPM_MUX("Decimation Filter", SND_SOC_NOPM, 0, 0,
|
|
decimation_filter_controls),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route adcx140_audio_map[] = {
|
|
/* Outputs */
|
|
{"CH1_OUT", NULL, "Output Mixer"},
|
|
{"CH2_OUT", NULL, "Output Mixer"},
|
|
{"CH3_OUT", NULL, "Output Mixer"},
|
|
{"CH4_OUT", NULL, "Output Mixer"},
|
|
|
|
{"CH1_ASI_EN", "Switch", "CH1_ADC"},
|
|
{"CH2_ASI_EN", "Switch", "CH2_ADC"},
|
|
{"CH3_ASI_EN", "Switch", "CH3_ADC"},
|
|
{"CH4_ASI_EN", "Switch", "CH4_ADC"},
|
|
|
|
{"Decimation Filter", "Linear Phase", "DRE_ENABLE"},
|
|
{"Decimation Filter", "Low Latency", "DRE_ENABLE"},
|
|
{"Decimation Filter", "Ultra-low Latency", "DRE_ENABLE"},
|
|
|
|
{"DRE_ENABLE", "Switch", "CH1_DRE_EN"},
|
|
{"DRE_ENABLE", "Switch", "CH2_DRE_EN"},
|
|
{"DRE_ENABLE", "Switch", "CH3_DRE_EN"},
|
|
{"DRE_ENABLE", "Switch", "CH4_DRE_EN"},
|
|
|
|
{"CH1_DRE_EN", "Switch", "CH1_ADC"},
|
|
{"CH2_DRE_EN", "Switch", "CH2_ADC"},
|
|
{"CH3_DRE_EN", "Switch", "CH3_ADC"},
|
|
{"CH4_DRE_EN", "Switch", "CH4_ADC"},
|
|
|
|
/* Mic input */
|
|
{"CH1_ADC", NULL, "MIC_GAIN_CTL_CH1"},
|
|
{"CH2_ADC", NULL, "MIC_GAIN_CTL_CH2"},
|
|
{"CH3_ADC", NULL, "MIC_GAIN_CTL_CH3"},
|
|
{"CH4_ADC", NULL, "MIC_GAIN_CTL_CH4"},
|
|
|
|
{"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"},
|
|
{"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"},
|
|
{"MIC_GAIN_CTL_CH2", NULL, "IN2 Analog Mic Resistor"},
|
|
{"MIC_GAIN_CTL_CH2", NULL, "IN2 Analog Mic Resistor"},
|
|
{"MIC_GAIN_CTL_CH3", NULL, "IN3 Analog Mic Resistor"},
|
|
{"MIC_GAIN_CTL_CH3", NULL, "IN3 Analog Mic Resistor"},
|
|
{"MIC_GAIN_CTL_CH4", NULL, "IN4 Analog Mic Resistor"},
|
|
{"MIC_GAIN_CTL_CH4", NULL, "IN4 Analog Mic Resistor"},
|
|
|
|
{"IN1 Analog Mic Resistor", "2.5 kOhm", "MIC1P Input Mux"},
|
|
{"IN1 Analog Mic Resistor", "10 kOhm", "MIC1P Input Mux"},
|
|
{"IN1 Analog Mic Resistor", "20 kOhm", "MIC1P Input Mux"},
|
|
|
|
{"IN1 Analog Mic Resistor", "2.5 kOhm", "MIC1M Input Mux"},
|
|
{"IN1 Analog Mic Resistor", "10 kOhm", "MIC1M Input Mux"},
|
|
{"IN1 Analog Mic Resistor", "20 kOhm", "MIC1M Input Mux"},
|
|
|
|
{"IN2 Analog Mic Resistor", "2.5 kOhm", "MIC2P Input Mux"},
|
|
{"IN2 Analog Mic Resistor", "10 kOhm", "MIC2P Input Mux"},
|
|
{"IN2 Analog Mic Resistor", "20 kOhm", "MIC2P Input Mux"},
|
|
|
|
{"IN2 Analog Mic Resistor", "2.5 kOhm", "MIC2M Input Mux"},
|
|
{"IN2 Analog Mic Resistor", "10 kOhm", "MIC2M Input Mux"},
|
|
{"IN2 Analog Mic Resistor", "20 kOhm", "MIC2M Input Mux"},
|
|
|
|
{"IN3 Analog Mic Resistor", "2.5 kOhm", "MIC3P Input Mux"},
|
|
{"IN3 Analog Mic Resistor", "10 kOhm", "MIC3P Input Mux"},
|
|
{"IN3 Analog Mic Resistor", "20 kOhm", "MIC3P Input Mux"},
|
|
|
|
{"IN3 Analog Mic Resistor", "2.5 kOhm", "MIC3M Input Mux"},
|
|
{"IN3 Analog Mic Resistor", "10 kOhm", "MIC3M Input Mux"},
|
|
{"IN3 Analog Mic Resistor", "20 kOhm", "MIC3M Input Mux"},
|
|
|
|
{"IN4 Analog Mic Resistor", "2.5 kOhm", "MIC4P Input Mux"},
|
|
{"IN4 Analog Mic Resistor", "10 kOhm", "MIC4P Input Mux"},
|
|
{"IN4 Analog Mic Resistor", "20 kOhm", "MIC4P Input Mux"},
|
|
|
|
{"IN4 Analog Mic Resistor", "2.5 kOhm", "MIC4M Input Mux"},
|
|
{"IN4 Analog Mic Resistor", "10 kOhm", "MIC4M Input Mux"},
|
|
{"IN4 Analog Mic Resistor", "20 kOhm", "MIC4M Input Mux"},
|
|
|
|
{"PDM Clk Div Select", "2.8224 MHz", "MIC1P Input Mux"},
|
|
{"PDM Clk Div Select", "1.4112 MHz", "MIC1P Input Mux"},
|
|
{"PDM Clk Div Select", "705.6 kHz", "MIC1P Input Mux"},
|
|
{"PDM Clk Div Select", "5.6448 MHz", "MIC1P Input Mux"},
|
|
|
|
{"MIC1 Analog Mux", "Line In", "MIC1P"},
|
|
{"MIC2 Analog Mux", "Line In", "MIC2P"},
|
|
{"MIC3 Analog Mux", "Line In", "MIC3P"},
|
|
{"MIC4 Analog Mux", "Line In", "MIC4P"},
|
|
|
|
{"MIC1P Input Mux", "Analog", "MIC1P"},
|
|
{"MIC1M Input Mux", "Analog", "MIC1M"},
|
|
{"MIC2P Input Mux", "Analog", "MIC2P"},
|
|
{"MIC2M Input Mux", "Analog", "MIC2M"},
|
|
{"MIC3P Input Mux", "Analog", "MIC3P"},
|
|
{"MIC3M Input Mux", "Analog", "MIC3M"},
|
|
{"MIC4P Input Mux", "Analog", "MIC4P"},
|
|
{"MIC4M Input Mux", "Analog", "MIC4M"},
|
|
};
|
|
|
|
static const struct snd_kcontrol_new adcx140_snd_controls[] = {
|
|
SOC_SINGLE_TLV("Analog CH1 Mic Gain Volume", ADCX140_CH1_CFG1, 2, 42, 0,
|
|
adc_tlv),
|
|
SOC_SINGLE_TLV("Analog CH2 Mic Gain Volume", ADCX140_CH2_CFG1, 2, 42, 0,
|
|
adc_tlv),
|
|
SOC_SINGLE_TLV("Analog CH3 Mic Gain Volume", ADCX140_CH3_CFG1, 2, 42, 0,
|
|
adc_tlv),
|
|
SOC_SINGLE_TLV("Analog CH4 Mic Gain Volume", ADCX140_CH4_CFG1, 2, 42, 0,
|
|
adc_tlv),
|
|
|
|
SOC_SINGLE_TLV("DRE Threshold", ADCX140_DRE_CFG0, 4, 9, 0,
|
|
dre_thresh_tlv),
|
|
SOC_SINGLE_TLV("DRE Max Gain", ADCX140_DRE_CFG0, 0, 12, 0,
|
|
dre_gain_tlv),
|
|
|
|
SOC_SINGLE_TLV("AGC Threshold", ADCX140_AGC_CFG0, 4, 15, 0,
|
|
agc_thresh_tlv),
|
|
SOC_SINGLE_TLV("AGC Max Gain", ADCX140_AGC_CFG0, 0, 13, 0,
|
|
agc_gain_tlv),
|
|
|
|
SOC_SINGLE_TLV("Digital CH1 Out Volume", ADCX140_CH1_CFG2,
|
|
0, 0xff, 0, dig_vol_tlv),
|
|
SOC_SINGLE_TLV("Digital CH2 Out Volume", ADCX140_CH2_CFG2,
|
|
0, 0xff, 0, dig_vol_tlv),
|
|
SOC_SINGLE_TLV("Digital CH3 Out Volume", ADCX140_CH3_CFG2,
|
|
0, 0xff, 0, dig_vol_tlv),
|
|
SOC_SINGLE_TLV("Digital CH4 Out Volume", ADCX140_CH4_CFG2,
|
|
0, 0xff, 0, dig_vol_tlv),
|
|
SOC_SINGLE_TLV("Digital CH5 Out Volume", ADCX140_CH5_CFG2,
|
|
0, 0xff, 0, dig_vol_tlv),
|
|
SOC_SINGLE_TLV("Digital CH6 Out Volume", ADCX140_CH6_CFG2,
|
|
0, 0xff, 0, dig_vol_tlv),
|
|
SOC_SINGLE_TLV("Digital CH7 Out Volume", ADCX140_CH7_CFG2,
|
|
0, 0xff, 0, dig_vol_tlv),
|
|
SOC_SINGLE_TLV("Digital CH8 Out Volume", ADCX140_CH8_CFG2,
|
|
0, 0xff, 0, dig_vol_tlv),
|
|
};
|
|
|
|
static int adcx140_reset(struct adcx140_priv *adcx140)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (adcx140->gpio_reset) {
|
|
gpiod_direction_output(adcx140->gpio_reset, 0);
|
|
/* 8.4.1: wait for hw shutdown (25ms) + >= 1ms */
|
|
usleep_range(30000, 100000);
|
|
gpiod_direction_output(adcx140->gpio_reset, 1);
|
|
} else {
|
|
ret = regmap_write(adcx140->regmap, ADCX140_SW_RESET,
|
|
ADCX140_RESET);
|
|
}
|
|
|
|
/* 8.4.2: wait >= 10 ms after entering sleep mode. */
|
|
usleep_range(10000, 100000);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adcx140_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
u8 data = 0;
|
|
|
|
switch (params_width(params)) {
|
|
case 16:
|
|
data = ADCX140_16_BIT_WORD;
|
|
break;
|
|
case 20:
|
|
data = ADCX140_20_BIT_WORD;
|
|
break;
|
|
case 24:
|
|
data = ADCX140_24_BIT_WORD;
|
|
break;
|
|
case 32:
|
|
data = ADCX140_32_BIT_WORD;
|
|
break;
|
|
default:
|
|
dev_err(component->dev, "%s: Unsupported width %d\n",
|
|
__func__, params_width(params));
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_component_update_bits(component, ADCX140_ASI_CFG0,
|
|
ADCX140_WORD_LEN_MSK, data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
|
|
u8 iface_reg1 = 0;
|
|
u8 iface_reg2 = 0;
|
|
|
|
/* set master/slave audio interface */
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
iface_reg2 |= ADCX140_BCLK_FSYNC_MASTER;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
default:
|
|
dev_err(component->dev, "Invalid DAI master/slave interface\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* signal polarity */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
iface_reg1 |= ADCX140_FSYNCINV_BIT;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
iface_reg1 |= ADCX140_BCLKINV_BIT | ADCX140_FSYNCINV_BIT;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
iface_reg1 |= ADCX140_BCLKINV_BIT;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
default:
|
|
dev_err(component->dev, "Invalid DAI clock signal polarity\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* interface format */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
iface_reg1 |= ADCX140_I2S_MODE_BIT;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
iface_reg1 |= ADCX140_LEFT_JUST_BIT;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
break;
|
|
default:
|
|
dev_err(component->dev, "Invalid DAI interface format\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
adcx140->dai_fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
|
|
|
|
snd_soc_component_update_bits(component, ADCX140_ASI_CFG0,
|
|
ADCX140_FSYNCINV_BIT |
|
|
ADCX140_BCLKINV_BIT |
|
|
ADCX140_ASI_FORMAT_MSK,
|
|
iface_reg1);
|
|
snd_soc_component_update_bits(component, ADCX140_MST_CFG0,
|
|
ADCX140_BCLK_FSYNC_MASTER, iface_reg2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adcx140_set_dai_tdm_slot(struct snd_soc_dai *codec_dai,
|
|
unsigned int tx_mask, unsigned int rx_mask,
|
|
int slots, int slot_width)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
|
|
unsigned int lsb;
|
|
|
|
if (tx_mask != rx_mask) {
|
|
dev_err(component->dev, "tx and rx masks must be symmetric\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* TDM based on DSP mode requires slots to be adjacent */
|
|
lsb = __ffs(tx_mask);
|
|
if ((lsb + 1) != __fls(tx_mask)) {
|
|
dev_err(component->dev, "Invalid mask, slots must be adjacent\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (slot_width) {
|
|
case 16:
|
|
case 20:
|
|
case 24:
|
|
case 32:
|
|
break;
|
|
default:
|
|
dev_err(component->dev, "Unsupported slot width %d\n", slot_width);
|
|
return -EINVAL;
|
|
}
|
|
|
|
adcx140->tdm_delay = lsb;
|
|
adcx140->slot_width = slot_width;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adcx140_prepare(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
|
|
int offset = 0;
|
|
int width = adcx140->slot_width;
|
|
|
|
if (!width)
|
|
width = substream->runtime->sample_bits;
|
|
|
|
/* TDM slot selection only valid in DSP_A/_B mode */
|
|
if (adcx140->dai_fmt == SND_SOC_DAIFMT_DSP_A)
|
|
offset += (adcx140->tdm_delay * width + 1);
|
|
else if (adcx140->dai_fmt == SND_SOC_DAIFMT_DSP_B)
|
|
offset += adcx140->tdm_delay * width;
|
|
|
|
/* Configure data offset */
|
|
snd_soc_component_update_bits(component, ADCX140_ASI_CFG1,
|
|
ADCX140_TX_OFFSET_MASK, offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops adcx140_dai_ops = {
|
|
.hw_params = adcx140_hw_params,
|
|
.set_fmt = adcx140_set_dai_fmt,
|
|
.prepare = adcx140_prepare,
|
|
.set_tdm_slot = adcx140_set_dai_tdm_slot,
|
|
};
|
|
|
|
static int adcx140_codec_probe(struct snd_soc_component *component)
|
|
{
|
|
struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
|
|
int sleep_cfg_val = ADCX140_WAKE_DEV;
|
|
u32 bias_source;
|
|
u32 vref_source;
|
|
u8 bias_cfg;
|
|
int pdm_count;
|
|
u32 pdm_edges[ADCX140_NUM_PDM_EDGES];
|
|
u32 pdm_edge_val = 0;
|
|
int gpi_count;
|
|
u32 gpi_inputs[ADCX140_NUM_GPI_PINS];
|
|
u32 gpi_input_val = 0;
|
|
int i;
|
|
int ret;
|
|
|
|
ret = device_property_read_u32(adcx140->dev, "ti,mic-bias-source",
|
|
&bias_source);
|
|
if (ret)
|
|
bias_source = ADCX140_MIC_BIAS_VAL_VREF;
|
|
|
|
if (bias_source > ADCX140_MIC_BIAS_VAL_AVDD) {
|
|
dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = device_property_read_u32(adcx140->dev, "ti,vref-source",
|
|
&vref_source);
|
|
if (ret)
|
|
vref_source = ADCX140_MIC_BIAS_VREF_275V;
|
|
|
|
if (vref_source > ADCX140_MIC_BIAS_VREF_1375V) {
|
|
dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
bias_cfg = bias_source << ADCX140_MIC_BIAS_SHIFT | vref_source;
|
|
|
|
pdm_count = device_property_count_u32(adcx140->dev,
|
|
"ti,pdm-edge-select");
|
|
if (pdm_count <= ADCX140_NUM_PDM_EDGES && pdm_count > 0) {
|
|
ret = device_property_read_u32_array(adcx140->dev,
|
|
"ti,pdm-edge-select",
|
|
pdm_edges, pdm_count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < pdm_count; i++)
|
|
pdm_edge_val |= pdm_edges[i] << (ADCX140_PDM_EDGE_SHIFT - i);
|
|
|
|
ret = regmap_write(adcx140->regmap, ADCX140_PDM_CFG,
|
|
pdm_edge_val);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
gpi_count = device_property_count_u32(adcx140->dev, "ti,gpi-config");
|
|
if (gpi_count <= ADCX140_NUM_GPI_PINS && gpi_count > 0) {
|
|
ret = device_property_read_u32_array(adcx140->dev,
|
|
"ti,gpi-config",
|
|
gpi_inputs, gpi_count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
gpi_input_val = gpi_inputs[ADCX140_GPI1_INDEX] << ADCX140_GPI_SHIFT |
|
|
gpi_inputs[ADCX140_GPI2_INDEX];
|
|
|
|
ret = regmap_write(adcx140->regmap, ADCX140_GPI_CFG0,
|
|
gpi_input_val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
gpi_input_val = gpi_inputs[ADCX140_GPI3_INDEX] << ADCX140_GPI_SHIFT |
|
|
gpi_inputs[ADCX140_GPI4_INDEX];
|
|
|
|
ret = regmap_write(adcx140->regmap, ADCX140_GPI_CFG1,
|
|
gpi_input_val);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = adcx140_reset(adcx140);
|
|
if (ret)
|
|
goto out;
|
|
|
|
if(adcx140->supply_areg == NULL)
|
|
sleep_cfg_val |= ADCX140_AREG_INTERNAL;
|
|
|
|
ret = regmap_write(adcx140->regmap, ADCX140_SLEEP_CFG, sleep_cfg_val);
|
|
if (ret) {
|
|
dev_err(adcx140->dev, "setting sleep config failed %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
/* 8.4.3: Wait >= 1ms after entering active mode. */
|
|
usleep_range(1000, 100000);
|
|
|
|
ret = regmap_update_bits(adcx140->regmap, ADCX140_BIAS_CFG,
|
|
ADCX140_MIC_BIAS_VAL_MSK |
|
|
ADCX140_MIC_BIAS_VREF_MSK, bias_cfg);
|
|
if (ret)
|
|
dev_err(adcx140->dev, "setting MIC bias failed %d\n", ret);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int adcx140_set_bias_level(struct snd_soc_component *component,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
|
|
int pwr_cfg = 0;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
case SND_SOC_BIAS_PREPARE:
|
|
case SND_SOC_BIAS_STANDBY:
|
|
pwr_cfg = ADCX140_PWR_CFG_BIAS_PDZ | ADCX140_PWR_CFG_PLL_PDZ |
|
|
ADCX140_PWR_CFG_ADC_PDZ;
|
|
break;
|
|
case SND_SOC_BIAS_OFF:
|
|
pwr_cfg = 0x0;
|
|
break;
|
|
}
|
|
|
|
return regmap_write(adcx140->regmap, ADCX140_PWR_CFG, pwr_cfg);
|
|
}
|
|
|
|
static const struct snd_soc_component_driver soc_codec_driver_adcx140 = {
|
|
.probe = adcx140_codec_probe,
|
|
.set_bias_level = adcx140_set_bias_level,
|
|
.controls = adcx140_snd_controls,
|
|
.num_controls = ARRAY_SIZE(adcx140_snd_controls),
|
|
.dapm_widgets = adcx140_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(adcx140_dapm_widgets),
|
|
.dapm_routes = adcx140_audio_map,
|
|
.num_dapm_routes = ARRAY_SIZE(adcx140_audio_map),
|
|
.suspend_bias_off = 1,
|
|
.idle_bias_on = 0,
|
|
.use_pmdown_time = 1,
|
|
.endianness = 1,
|
|
.non_legacy_dai_naming = 1,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver adcx140_dai_driver[] = {
|
|
{
|
|
.name = "tlv320adcx140-codec",
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 2,
|
|
.channels_max = ADCX140_MAX_CHANNELS,
|
|
.rates = ADCX140_RATES,
|
|
.formats = ADCX140_FORMATS,
|
|
},
|
|
.ops = &adcx140_dai_ops,
|
|
.symmetric_rates = 1,
|
|
}
|
|
};
|
|
|
|
static const struct of_device_id tlv320adcx140_of_match[] = {
|
|
{ .compatible = "ti,tlv320adc3140" },
|
|
{ .compatible = "ti,tlv320adc5140" },
|
|
{ .compatible = "ti,tlv320adc6140" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tlv320adcx140_of_match);
|
|
|
|
static int adcx140_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct adcx140_priv *adcx140;
|
|
int ret;
|
|
|
|
adcx140 = devm_kzalloc(&i2c->dev, sizeof(*adcx140), GFP_KERNEL);
|
|
if (!adcx140)
|
|
return -ENOMEM;
|
|
|
|
adcx140->gpio_reset = devm_gpiod_get_optional(adcx140->dev,
|
|
"reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(adcx140->gpio_reset))
|
|
dev_info(&i2c->dev, "Reset GPIO not defined\n");
|
|
|
|
adcx140->supply_areg = devm_regulator_get_optional(adcx140->dev,
|
|
"areg");
|
|
if (IS_ERR(adcx140->supply_areg)) {
|
|
if (PTR_ERR(adcx140->supply_areg) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
else
|
|
adcx140->supply_areg = NULL;
|
|
} else {
|
|
ret = regulator_enable(adcx140->supply_areg);
|
|
if (ret) {
|
|
dev_err(adcx140->dev, "Failed to enable areg\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
adcx140->regmap = devm_regmap_init_i2c(i2c, &adcx140_i2c_regmap);
|
|
if (IS_ERR(adcx140->regmap)) {
|
|
ret = PTR_ERR(adcx140->regmap);
|
|
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
adcx140->dev = &i2c->dev;
|
|
i2c_set_clientdata(i2c, adcx140);
|
|
|
|
return devm_snd_soc_register_component(&i2c->dev,
|
|
&soc_codec_driver_adcx140,
|
|
adcx140_dai_driver, 1);
|
|
}
|
|
|
|
static const struct i2c_device_id adcx140_i2c_id[] = {
|
|
{ "tlv320adc3140", 0 },
|
|
{ "tlv320adc5140", 1 },
|
|
{ "tlv320adc6140", 2 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, adcx140_i2c_id);
|
|
|
|
static struct i2c_driver adcx140_i2c_driver = {
|
|
.driver = {
|
|
.name = "tlv320adcx140-codec",
|
|
.of_match_table = of_match_ptr(tlv320adcx140_of_match),
|
|
},
|
|
.probe = adcx140_i2c_probe,
|
|
.id_table = adcx140_i2c_id,
|
|
};
|
|
module_i2c_driver(adcx140_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
|
|
MODULE_DESCRIPTION("ASoC TLV320ADCX140 CODEC Driver");
|
|
MODULE_LICENSE("GPL v2");
|