mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
0aed64c176
HW can provide 1.6V micbias level as well the existing levels already provided in the driver. This patch adds support for 1.6V to the DT binding. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
109 lines
3.4 KiB
Plaintext
109 lines
3.4 KiB
Plaintext
Dialog Semiconductor DA7219 Audio Codec bindings
|
|
|
|
DA7219 is an audio codec with advanced accessory detect features.
|
|
|
|
======
|
|
|
|
Required properties:
|
|
- compatible : Should be "dlg,da7219"
|
|
- reg: Specifies the I2C slave address
|
|
|
|
- interrupt-parent : Specifies the phandle of the interrupt controller to which
|
|
the IRQs from DA7219 are delivered to.
|
|
- interrupts : IRQ line info for DA7219.
|
|
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
|
|
further information relating to interrupt properties)
|
|
|
|
- VDD-supply: VDD power supply for the device
|
|
- VDDMIC-supply: VDDMIC power supply for the device
|
|
- VDDIO-supply: VDDIO power supply for the device
|
|
(See Documentation/devicetree/bindings/regulator/regulator.txt for further
|
|
information relating to regulators)
|
|
|
|
Optional properties:
|
|
- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
|
|
interrupt is to be used to wake system, otherwise "irq" should be used.
|
|
- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
|
|
|
|
- clocks : phandle and clock specifier for codec MCLK.
|
|
- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
|
|
|
|
- dlg,micbias-lvl : Voltage (mV) for Mic Bias
|
|
[<1600>, <1800>, <2000>, <2200>, <2400>, <2600>]
|
|
- dlg,mic-amp-in-sel : Mic input source type
|
|
["diff", "se_p", "se_n"]
|
|
|
|
Deprecated properties:
|
|
- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
|
|
(LDO unavailable in production HW so property no longer required).
|
|
|
|
======
|
|
|
|
Child node - 'da7219_aad':
|
|
|
|
Optional properties:
|
|
- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
|
|
[<2800>, <2900>]
|
|
- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
|
|
- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms)
|
|
[<2>, <5>, <10>, <50>, <100>, <200>, <500>]
|
|
- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms)
|
|
[<200>, <500>, <750>, <1000>]
|
|
- dlg,jack-ins-deb : Debounce time for jack insertion (ms)
|
|
[<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>]
|
|
- dlg,jack-det-rate: Jack type detection latency (3/4 pole)
|
|
["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"]
|
|
- dlg,jack-rem-deb : Debounce time for jack removal (ms)
|
|
[<1>, <5>, <10>, <20>]
|
|
- dlg,a-d-btn-thr : Impedance threshold between buttons A and D
|
|
[0x0 - 0xFF]
|
|
- dlg,d-b-btn-thr : Impedance threshold between buttons D and B
|
|
[0x0 - 0xFF]
|
|
- dlg,b-c-btn-thr : Impedance threshold between buttons B and C
|
|
[0x0 - 0xFF]
|
|
- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
|
|
[0x0 - 0xFF]
|
|
- dlg,btn-avg : Number of 8-bit readings for averaged button measurement
|
|
[<1>, <2>, <4>, <8>]
|
|
- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement
|
|
[<1>, <2>, <4>, <8>]
|
|
|
|
======
|
|
|
|
Example:
|
|
|
|
codec: da7219@1a {
|
|
compatible = "dlg,da7219";
|
|
reg = <0x1a>;
|
|
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
VDD-supply = <®_audio>;
|
|
VDDMIC-supply = <®_audio>;
|
|
VDDIO-supply = <®_audio>;
|
|
|
|
clocks = <&clks 201>;
|
|
clock-names = "mclk";
|
|
|
|
dlg,ldo-lvl = <1200>;
|
|
dlg,micbias-lvl = <2600>;
|
|
dlg,mic-amp-in-sel = "diff";
|
|
|
|
da7219_aad {
|
|
dlg,btn-cfg = <50>;
|
|
dlg,mic-det-thr = <500>;
|
|
dlg,jack-ins-deb = <20>;
|
|
dlg,jack-det-rate = "32ms_64ms";
|
|
dlg,jack-rem-deb = <1>;
|
|
|
|
dlg,a-d-btn-thr = <0xa>;
|
|
dlg,d-b-btn-thr = <0x16>;
|
|
dlg,b-c-btn-thr = <0x21>;
|
|
dlg,c-mic-btn-thr = <0x3E>;
|
|
|
|
dlg,btn-avg = <4>;
|
|
dlg,adc-1bit-rpt = <1>;
|
|
};
|
|
};
|