mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 16:46:45 +07:00
e65857a64f
This adds the actual VGA DAC bridge that is used in the Versatile AB, and sets the mode to 640x480 VGA. The "clcd" clock was incorrectly named, the proper name (from bindings) is "clcdclk". So far drivers survived by just getting the first clock, but future drivers will use named clocks. We add the panel connector to the "arm,versatile-tft-panel" as well, the signals actually fork on the board, reaching both the VGA DAC and the display connector. Cc: Mali DP Maintainers <malidp@foss.arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
438 lines
9.2 KiB
Plaintext
438 lines
9.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
/include/ "skeleton.dtsi"
|
|
|
|
/ {
|
|
model = "ARM Versatile AB";
|
|
compatible = "arm,versatile-ab";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&vic>;
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
i2c0 = &i2c0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
memory {
|
|
reg = <0x0 0x08000000>;
|
|
};
|
|
|
|
xtal24mhz: xtal24mhz@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
bridge {
|
|
compatible = "ti,ths8134b", "ti,ths8134";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
vga_bridge_in: endpoint {
|
|
remote-endpoint = <&clcd_pads_vga_dac>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
vga_bridge_out: endpoint {
|
|
remote-endpoint = <&vga_con_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vga {
|
|
compatible = "vga-connector";
|
|
|
|
port {
|
|
vga_con_in: endpoint {
|
|
remote-endpoint = <&vga_bridge_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
core-module@10000000 {
|
|
compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
|
|
reg = <0x10000000 0x200>;
|
|
|
|
led@08.0 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x01>;
|
|
label = "versatile:0";
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "on";
|
|
};
|
|
led@08.1 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x02>;
|
|
label = "versatile:1";
|
|
linux,default-trigger = "mmc0";
|
|
default-state = "off";
|
|
};
|
|
led@08.2 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x04>;
|
|
label = "versatile:2";
|
|
linux,default-trigger = "cpu0";
|
|
default-state = "off";
|
|
};
|
|
led@08.3 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x08>;
|
|
label = "versatile:3";
|
|
default-state = "off";
|
|
};
|
|
led@08.4 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x10>;
|
|
label = "versatile:4";
|
|
default-state = "off";
|
|
};
|
|
led@08.5 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x20>;
|
|
label = "versatile:5";
|
|
default-state = "off";
|
|
};
|
|
led@08.6 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x40>;
|
|
label = "versatile:6";
|
|
default-state = "off";
|
|
};
|
|
led@08.7 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x80>;
|
|
label = "versatile:7";
|
|
default-state = "off";
|
|
};
|
|
|
|
/* OSC1 on AB, OSC4 on PB */
|
|
osc1: cm_aux_osc@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "arm,versatile-cm-auxosc";
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
|
|
timclk: timclk@1M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <24>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
pclk: pclk@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
};
|
|
|
|
flash@34000000 {
|
|
/* 64 MiB NOR flash in non-interleaved chips */
|
|
compatible = "arm,versatile-flash", "cfi-flash";
|
|
reg = <0x34000000 0x04000000>;
|
|
bank-width = <4>;
|
|
};
|
|
|
|
i2c0: i2c@10002000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "arm,versatile-i2c";
|
|
reg = <0x10002000 0x1000>;
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds1338";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
net@10010000 {
|
|
compatible = "smsc,lan91c111";
|
|
reg = <0x10010000 0x10000>;
|
|
interrupts = <25>;
|
|
};
|
|
|
|
lcd@10008000 {
|
|
compatible = "arm,versatile-lcd";
|
|
reg = <0x10008000 0x1000>;
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
vic: intc@10140000 {
|
|
compatible = "arm,versatile-vic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x10140000 0x1000>;
|
|
clear-mask = <0xffffffff>;
|
|
valid-mask = <0xffffffff>;
|
|
};
|
|
|
|
sic: intc@10003000 {
|
|
compatible = "arm,versatile-sic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x10003000 0x1000>;
|
|
interrupt-parent = <&vic>;
|
|
interrupts = <31>; /* Cascaded to vic */
|
|
clear-mask = <0xffffffff>;
|
|
/*
|
|
* Valid interrupt lines mask according to
|
|
* table 4-36 page 4-50 of ARM DUI 0225D
|
|
*/
|
|
valid-mask = <0x0760031b>;
|
|
};
|
|
|
|
dma@10130000 {
|
|
compatible = "arm,pl081", "arm,primecell";
|
|
reg = <0x10130000 0x1000>;
|
|
interrupts = <17>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
uart0: uart@101f1000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x101f1000 0x1000>;
|
|
interrupts = <12>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
uart1: uart@101f2000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x101f2000 0x1000>;
|
|
interrupts = <13>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
uart2: uart@101f3000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x101f3000 0x1000>;
|
|
interrupts = <14>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
smc@10100000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x10100000 0x1000>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
mpmc@10110000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x10110000 0x1000>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
display@10120000 {
|
|
compatible = "arm,pl110", "arm,primecell";
|
|
reg = <0x10120000 0x1000>;
|
|
interrupts = <16>;
|
|
clocks = <&osc1>, <&pclk>;
|
|
clock-names = "clcdclk", "apb_pclk";
|
|
/* 800x600 16bpp @ 36MHz works fine */
|
|
max-memory-bandwidth = <54000000>;
|
|
|
|
/*
|
|
* This port is routed through a PLD (Programmable
|
|
* Logic Device) that routes the output from the CLCD
|
|
* (after transformations) to the VGA DAC and also an
|
|
* external panel connector. The PLD is essential for
|
|
* supporting RGB565/BGR565.
|
|
*
|
|
* The signals from the port thus reaches two endpoints.
|
|
* The PLD is managed through a few special bits in the
|
|
* FPGA "sysreg".
|
|
*
|
|
* This arrangement can be clearly seen in
|
|
* ARM DUI 0225D, page 3-41, figure 3-19.
|
|
*/
|
|
port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
clcd_pads_panel: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&panel_in>;
|
|
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
|
};
|
|
clcd_pads_vga_dac: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&vga_bridge_in>;
|
|
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sctl@101e0000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x101e0000 0x1000>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
watchdog@101e1000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x101e1000 0x1000>;
|
|
interrupts = <0>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
timer@101e2000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x101e2000 0x1000>;
|
|
interrupts = <4>;
|
|
clocks = <&timclk>, <&timclk>, <&pclk>;
|
|
clock-names = "timer0", "timer1", "apb_pclk";
|
|
};
|
|
|
|
timer@101e3000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x101e3000 0x1000>;
|
|
interrupts = <5>;
|
|
clocks = <&timclk>, <&timclk>, <&pclk>;
|
|
clock-names = "timer0", "timer1", "apb_pclk";
|
|
};
|
|
|
|
gpio0: gpio@101e4000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x101e4000 0x1000>;
|
|
gpio-controller;
|
|
interrupts = <6>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
gpio1: gpio@101e5000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x101e5000 0x1000>;
|
|
interrupts = <7>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
rtc@101e8000 {
|
|
compatible = "arm,pl030", "arm,primecell";
|
|
reg = <0x101e8000 0x1000>;
|
|
interrupts = <10>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
sci@101f0000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x101f0000 0x1000>;
|
|
interrupts = <15>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
ssp@101f4000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x101f4000 0x1000>;
|
|
interrupts = <11>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "SSPCLK", "apb_pclk";
|
|
};
|
|
|
|
fpga {
|
|
compatible = "arm,versatile-fpga", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x10000000 0x10000>;
|
|
|
|
sysreg@0 {
|
|
compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
|
|
reg = <0x00000 0x1000>;
|
|
|
|
panel: display@0 {
|
|
compatible = "arm,versatile-tft-panel";
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&clcd_pads_panel>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
aaci@4000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x4000 0x1000>;
|
|
interrupts = <24>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
mmc@5000 {
|
|
compatible = "arm,pl180", "arm,primecell";
|
|
reg = <0x5000 0x1000>;
|
|
interrupts-extended = <&vic 22 &sic 1>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
};
|
|
kmi@6000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x6000 0x1000>;
|
|
interrupt-parent = <&sic>;
|
|
interrupts = <3>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
kmi@7000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x7000 0x1000>;
|
|
interrupt-parent = <&sic>;
|
|
interrupts = <4>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
};
|
|
};
|
|
};
|