mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 21:06:39 +07:00
e5ba5ec833
To work with scatter gather properly, fixes have been done in number of functions. I will explain requirement of each fixes one by one. start_slot: used to retrieve all request of SG during cleanup dwc3_gadget_giveback: We need to skip link TRB if it was one of the intermediate TRB of SG. dwc3_prepare_one_trb: We need to track all submitted TRBs during cleanup. Since, all TRBs would be serially allocated, so we can just keep starting slot info and we can always find rest of them. We need to pass sg node number, so that we cab appropriately program ISOC_FIRST/ISOC, Chain etc. dwc3_prepare_trbs: last_one should be set when it is last node of SG as well as last node of request_list. __dwc3_cleanup_done_trbs: It has been prepared after re-factorization of dwc3_cleanup_done_reqs. It is called for each TRB of SG. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
874 lines
26 KiB
C
874 lines
26 KiB
C
/**
|
|
* core.h - DesignWare USB3 DRD Core Header
|
|
*
|
|
* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
|
|
*
|
|
* Authors: Felipe Balbi <balbi@ti.com>,
|
|
* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The names of the above-listed copyright holders may not be used
|
|
* to endorse or promote products derived from this software without
|
|
* specific prior written permission.
|
|
*
|
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2, as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
|
|
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef __DRIVERS_USB_DWC3_CORE_H
|
|
#define __DRIVERS_USB_DWC3_CORE_H
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/list.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/debugfs.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
|
|
/* Global constants */
|
|
#define DWC3_EP0_BOUNCE_SIZE 512
|
|
#define DWC3_ENDPOINTS_NUM 32
|
|
#define DWC3_XHCI_RESOURCES_NUM 2
|
|
|
|
#define DWC3_EVENT_SIZE 4 /* bytes */
|
|
#define DWC3_EVENT_MAX_NUM 64 /* 2 events/endpoint */
|
|
#define DWC3_EVENT_BUFFERS_SIZE (DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM)
|
|
#define DWC3_EVENT_TYPE_MASK 0xfe
|
|
|
|
#define DWC3_EVENT_TYPE_DEV 0
|
|
#define DWC3_EVENT_TYPE_CARKIT 3
|
|
#define DWC3_EVENT_TYPE_I2C 4
|
|
|
|
#define DWC3_DEVICE_EVENT_DISCONNECT 0
|
|
#define DWC3_DEVICE_EVENT_RESET 1
|
|
#define DWC3_DEVICE_EVENT_CONNECT_DONE 2
|
|
#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE 3
|
|
#define DWC3_DEVICE_EVENT_WAKEUP 4
|
|
#define DWC3_DEVICE_EVENT_HIBER_REQ 5
|
|
#define DWC3_DEVICE_EVENT_EOPF 6
|
|
#define DWC3_DEVICE_EVENT_SOF 7
|
|
#define DWC3_DEVICE_EVENT_ERRATIC_ERROR 9
|
|
#define DWC3_DEVICE_EVENT_CMD_CMPL 10
|
|
#define DWC3_DEVICE_EVENT_OVERFLOW 11
|
|
|
|
#define DWC3_GEVNTCOUNT_MASK 0xfffc
|
|
#define DWC3_GSNPSID_MASK 0xffff0000
|
|
#define DWC3_GSNPSREV_MASK 0xffff
|
|
|
|
/* DWC3 registers memory space boundries */
|
|
#define DWC3_XHCI_REGS_START 0x0
|
|
#define DWC3_XHCI_REGS_END 0x7fff
|
|
#define DWC3_GLOBALS_REGS_START 0xc100
|
|
#define DWC3_GLOBALS_REGS_END 0xc6ff
|
|
#define DWC3_DEVICE_REGS_START 0xc700
|
|
#define DWC3_DEVICE_REGS_END 0xcbff
|
|
#define DWC3_OTG_REGS_START 0xcc00
|
|
#define DWC3_OTG_REGS_END 0xccff
|
|
|
|
/* Global Registers */
|
|
#define DWC3_GSBUSCFG0 0xc100
|
|
#define DWC3_GSBUSCFG1 0xc104
|
|
#define DWC3_GTXTHRCFG 0xc108
|
|
#define DWC3_GRXTHRCFG 0xc10c
|
|
#define DWC3_GCTL 0xc110
|
|
#define DWC3_GEVTEN 0xc114
|
|
#define DWC3_GSTS 0xc118
|
|
#define DWC3_GSNPSID 0xc120
|
|
#define DWC3_GGPIO 0xc124
|
|
#define DWC3_GUID 0xc128
|
|
#define DWC3_GUCTL 0xc12c
|
|
#define DWC3_GBUSERRADDR0 0xc130
|
|
#define DWC3_GBUSERRADDR1 0xc134
|
|
#define DWC3_GPRTBIMAP0 0xc138
|
|
#define DWC3_GPRTBIMAP1 0xc13c
|
|
#define DWC3_GHWPARAMS0 0xc140
|
|
#define DWC3_GHWPARAMS1 0xc144
|
|
#define DWC3_GHWPARAMS2 0xc148
|
|
#define DWC3_GHWPARAMS3 0xc14c
|
|
#define DWC3_GHWPARAMS4 0xc150
|
|
#define DWC3_GHWPARAMS5 0xc154
|
|
#define DWC3_GHWPARAMS6 0xc158
|
|
#define DWC3_GHWPARAMS7 0xc15c
|
|
#define DWC3_GDBGFIFOSPACE 0xc160
|
|
#define DWC3_GDBGLTSSM 0xc164
|
|
#define DWC3_GPRTBIMAP_HS0 0xc180
|
|
#define DWC3_GPRTBIMAP_HS1 0xc184
|
|
#define DWC3_GPRTBIMAP_FS0 0xc188
|
|
#define DWC3_GPRTBIMAP_FS1 0xc18c
|
|
|
|
#define DWC3_GUSB2PHYCFG(n) (0xc200 + (n * 0x04))
|
|
#define DWC3_GUSB2I2CCTL(n) (0xc240 + (n * 0x04))
|
|
|
|
#define DWC3_GUSB2PHYACC(n) (0xc280 + (n * 0x04))
|
|
|
|
#define DWC3_GUSB3PIPECTL(n) (0xc2c0 + (n * 0x04))
|
|
|
|
#define DWC3_GTXFIFOSIZ(n) (0xc300 + (n * 0x04))
|
|
#define DWC3_GRXFIFOSIZ(n) (0xc380 + (n * 0x04))
|
|
|
|
#define DWC3_GEVNTADRLO(n) (0xc400 + (n * 0x10))
|
|
#define DWC3_GEVNTADRHI(n) (0xc404 + (n * 0x10))
|
|
#define DWC3_GEVNTSIZ(n) (0xc408 + (n * 0x10))
|
|
#define DWC3_GEVNTCOUNT(n) (0xc40c + (n * 0x10))
|
|
|
|
#define DWC3_GHWPARAMS8 0xc600
|
|
|
|
/* Device Registers */
|
|
#define DWC3_DCFG 0xc700
|
|
#define DWC3_DCTL 0xc704
|
|
#define DWC3_DEVTEN 0xc708
|
|
#define DWC3_DSTS 0xc70c
|
|
#define DWC3_DGCMDPAR 0xc710
|
|
#define DWC3_DGCMD 0xc714
|
|
#define DWC3_DALEPENA 0xc720
|
|
#define DWC3_DEPCMDPAR2(n) (0xc800 + (n * 0x10))
|
|
#define DWC3_DEPCMDPAR1(n) (0xc804 + (n * 0x10))
|
|
#define DWC3_DEPCMDPAR0(n) (0xc808 + (n * 0x10))
|
|
#define DWC3_DEPCMD(n) (0xc80c + (n * 0x10))
|
|
|
|
/* OTG Registers */
|
|
#define DWC3_OCFG 0xcc00
|
|
#define DWC3_OCTL 0xcc04
|
|
#define DWC3_OEVTEN 0xcc08
|
|
#define DWC3_OSTS 0xcc0C
|
|
|
|
/* Bit fields */
|
|
|
|
/* Global Configuration Register */
|
|
#define DWC3_GCTL_PWRDNSCALE(n) ((n) << 19)
|
|
#define DWC3_GCTL_U2RSTECN (1 << 16)
|
|
#define DWC3_GCTL_RAMCLKSEL(x) (((x) & DWC3_GCTL_CLK_MASK) << 6)
|
|
#define DWC3_GCTL_CLK_BUS (0)
|
|
#define DWC3_GCTL_CLK_PIPE (1)
|
|
#define DWC3_GCTL_CLK_PIPEHALF (2)
|
|
#define DWC3_GCTL_CLK_MASK (3)
|
|
|
|
#define DWC3_GCTL_PRTCAP(n) (((n) & (3 << 12)) >> 12)
|
|
#define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12)
|
|
#define DWC3_GCTL_PRTCAP_HOST 1
|
|
#define DWC3_GCTL_PRTCAP_DEVICE 2
|
|
#define DWC3_GCTL_PRTCAP_OTG 3
|
|
|
|
#define DWC3_GCTL_CORESOFTRESET (1 << 11)
|
|
#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
|
|
#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
|
|
#define DWC3_GCTL_DISSCRAMBLE (1 << 3)
|
|
#define DWC3_GCTL_GBLHIBERNATIONEN (1 << 1)
|
|
#define DWC3_GCTL_DSBLCLKGTNG (1 << 0)
|
|
|
|
/* Global USB2 PHY Configuration Register */
|
|
#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
|
|
#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
|
|
|
|
/* Global USB3 PIPE Control Register */
|
|
#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
|
|
#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
|
|
|
|
/* Global TX Fifo Size Register */
|
|
#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff)
|
|
#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)
|
|
|
|
/* Global HWPARAMS1 Register */
|
|
#define DWC3_GHWPARAMS1_EN_PWROPT(n) (((n) & (3 << 24)) >> 24)
|
|
#define DWC3_GHWPARAMS1_EN_PWROPT_NO 0
|
|
#define DWC3_GHWPARAMS1_EN_PWROPT_CLK 1
|
|
#define DWC3_GHWPARAMS1_EN_PWROPT_HIB 2
|
|
#define DWC3_GHWPARAMS1_PWROPT(n) ((n) << 24)
|
|
#define DWC3_GHWPARAMS1_PWROPT_MASK DWC3_GHWPARAMS1_PWROPT(3)
|
|
|
|
/* Global HWPARAMS4 Register */
|
|
#define DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(n) (((n) & (0x0f << 13)) >> 13)
|
|
#define DWC3_MAX_HIBER_SCRATCHBUFS 15
|
|
|
|
/* Device Configuration Register */
|
|
#define DWC3_DCFG_LPM_CAP (1 << 22)
|
|
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
|
|
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
|
|
|
|
#define DWC3_DCFG_SPEED_MASK (7 << 0)
|
|
#define DWC3_DCFG_SUPERSPEED (4 << 0)
|
|
#define DWC3_DCFG_HIGHSPEED (0 << 0)
|
|
#define DWC3_DCFG_FULLSPEED2 (1 << 0)
|
|
#define DWC3_DCFG_LOWSPEED (2 << 0)
|
|
#define DWC3_DCFG_FULLSPEED1 (3 << 0)
|
|
|
|
#define DWC3_DCFG_LPM_CAP (1 << 22)
|
|
|
|
/* Device Control Register */
|
|
#define DWC3_DCTL_RUN_STOP (1 << 31)
|
|
#define DWC3_DCTL_CSFTRST (1 << 30)
|
|
#define DWC3_DCTL_LSFTRST (1 << 29)
|
|
|
|
#define DWC3_DCTL_HIRD_THRES_MASK (0x1f << 24)
|
|
#define DWC3_DCTL_HIRD_THRES(n) ((n) << 24)
|
|
|
|
#define DWC3_DCTL_APPL1RES (1 << 23)
|
|
|
|
/* These apply for core versions 1.87a and earlier */
|
|
#define DWC3_DCTL_TRGTULST_MASK (0x0f << 17)
|
|
#define DWC3_DCTL_TRGTULST(n) ((n) << 17)
|
|
#define DWC3_DCTL_TRGTULST_U2 (DWC3_DCTL_TRGTULST(2))
|
|
#define DWC3_DCTL_TRGTULST_U3 (DWC3_DCTL_TRGTULST(3))
|
|
#define DWC3_DCTL_TRGTULST_SS_DIS (DWC3_DCTL_TRGTULST(4))
|
|
#define DWC3_DCTL_TRGTULST_RX_DET (DWC3_DCTL_TRGTULST(5))
|
|
#define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6))
|
|
|
|
/* These apply for core versions 1.94a and later */
|
|
#define DWC3_DCTL_KEEP_CONNECT (1 << 19)
|
|
#define DWC3_DCTL_L1_HIBER_EN (1 << 18)
|
|
#define DWC3_DCTL_CRS (1 << 17)
|
|
#define DWC3_DCTL_CSS (1 << 16)
|
|
|
|
#define DWC3_DCTL_INITU2ENA (1 << 12)
|
|
#define DWC3_DCTL_ACCEPTU2ENA (1 << 11)
|
|
#define DWC3_DCTL_INITU1ENA (1 << 10)
|
|
#define DWC3_DCTL_ACCEPTU1ENA (1 << 9)
|
|
#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
|
|
|
|
#define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5)
|
|
#define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
|
|
|
|
#define DWC3_DCTL_ULSTCHNG_NO_ACTION (DWC3_DCTL_ULSTCHNGREQ(0))
|
|
#define DWC3_DCTL_ULSTCHNG_SS_DISABLED (DWC3_DCTL_ULSTCHNGREQ(4))
|
|
#define DWC3_DCTL_ULSTCHNG_RX_DETECT (DWC3_DCTL_ULSTCHNGREQ(5))
|
|
#define DWC3_DCTL_ULSTCHNG_SS_INACTIVE (DWC3_DCTL_ULSTCHNGREQ(6))
|
|
#define DWC3_DCTL_ULSTCHNG_RECOVERY (DWC3_DCTL_ULSTCHNGREQ(8))
|
|
#define DWC3_DCTL_ULSTCHNG_COMPLIANCE (DWC3_DCTL_ULSTCHNGREQ(10))
|
|
#define DWC3_DCTL_ULSTCHNG_LOOPBACK (DWC3_DCTL_ULSTCHNGREQ(11))
|
|
|
|
/* Device Event Enable Register */
|
|
#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN (1 << 12)
|
|
#define DWC3_DEVTEN_EVNTOVERFLOWEN (1 << 11)
|
|
#define DWC3_DEVTEN_CMDCMPLTEN (1 << 10)
|
|
#define DWC3_DEVTEN_ERRTICERREN (1 << 9)
|
|
#define DWC3_DEVTEN_SOFEN (1 << 7)
|
|
#define DWC3_DEVTEN_EOPFEN (1 << 6)
|
|
#define DWC3_DEVTEN_HIBERNATIONREQEVTEN (1 << 5)
|
|
#define DWC3_DEVTEN_WKUPEVTEN (1 << 4)
|
|
#define DWC3_DEVTEN_ULSTCNGEN (1 << 3)
|
|
#define DWC3_DEVTEN_CONNECTDONEEN (1 << 2)
|
|
#define DWC3_DEVTEN_USBRSTEN (1 << 1)
|
|
#define DWC3_DEVTEN_DISCONNEVTEN (1 << 0)
|
|
|
|
/* Device Status Register */
|
|
#define DWC3_DSTS_DCNRD (1 << 29)
|
|
|
|
/* This applies for core versions 1.87a and earlier */
|
|
#define DWC3_DSTS_PWRUPREQ (1 << 24)
|
|
|
|
/* These apply for core versions 1.94a and later */
|
|
#define DWC3_DSTS_RSS (1 << 25)
|
|
#define DWC3_DSTS_SSS (1 << 24)
|
|
|
|
#define DWC3_DSTS_COREIDLE (1 << 23)
|
|
#define DWC3_DSTS_DEVCTRLHLT (1 << 22)
|
|
|
|
#define DWC3_DSTS_USBLNKST_MASK (0x0f << 18)
|
|
#define DWC3_DSTS_USBLNKST(n) (((n) & DWC3_DSTS_USBLNKST_MASK) >> 18)
|
|
|
|
#define DWC3_DSTS_RXFIFOEMPTY (1 << 17)
|
|
|
|
#define DWC3_DSTS_SOFFN_MASK (0x3fff << 3)
|
|
#define DWC3_DSTS_SOFFN(n) (((n) & DWC3_DSTS_SOFFN_MASK) >> 3)
|
|
|
|
#define DWC3_DSTS_CONNECTSPD (7 << 0)
|
|
|
|
#define DWC3_DSTS_SUPERSPEED (4 << 0)
|
|
#define DWC3_DSTS_HIGHSPEED (0 << 0)
|
|
#define DWC3_DSTS_FULLSPEED2 (1 << 0)
|
|
#define DWC3_DSTS_LOWSPEED (2 << 0)
|
|
#define DWC3_DSTS_FULLSPEED1 (3 << 0)
|
|
|
|
/* Device Generic Command Register */
|
|
#define DWC3_DGCMD_SET_LMP 0x01
|
|
#define DWC3_DGCMD_SET_PERIODIC_PAR 0x02
|
|
#define DWC3_DGCMD_XMIT_FUNCTION 0x03
|
|
|
|
/* These apply for core versions 1.94a and later */
|
|
#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO 0x04
|
|
#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI 0x05
|
|
|
|
#define DWC3_DGCMD_SELECTED_FIFO_FLUSH 0x09
|
|
#define DWC3_DGCMD_ALL_FIFO_FLUSH 0x0a
|
|
#define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c
|
|
#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10
|
|
|
|
#define DWC3_DGCMD_STATUS(n) (((n) >> 15) & 1)
|
|
#define DWC3_DGCMD_CMDACT (1 << 10)
|
|
#define DWC3_DGCMD_CMDIOC (1 << 8)
|
|
|
|
/* Device Generic Command Parameter Register */
|
|
#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT (1 << 0)
|
|
#define DWC3_DGCMDPAR_FIFO_NUM(n) ((n) << 0)
|
|
#define DWC3_DGCMDPAR_RX_FIFO (0 << 5)
|
|
#define DWC3_DGCMDPAR_TX_FIFO (1 << 5)
|
|
#define DWC3_DGCMDPAR_LOOPBACK_DIS (0 << 0)
|
|
#define DWC3_DGCMDPAR_LOOPBACK_ENA (1 << 0)
|
|
|
|
/* Device Endpoint Command Register */
|
|
#define DWC3_DEPCMD_PARAM_SHIFT 16
|
|
#define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT)
|
|
#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
|
|
#define DWC3_DEPCMD_STATUS(x) (((x) >> 15) & 1)
|
|
#define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11)
|
|
#define DWC3_DEPCMD_CMDACT (1 << 10)
|
|
#define DWC3_DEPCMD_CMDIOC (1 << 8)
|
|
|
|
#define DWC3_DEPCMD_DEPSTARTCFG (0x09 << 0)
|
|
#define DWC3_DEPCMD_ENDTRANSFER (0x08 << 0)
|
|
#define DWC3_DEPCMD_UPDATETRANSFER (0x07 << 0)
|
|
#define DWC3_DEPCMD_STARTTRANSFER (0x06 << 0)
|
|
#define DWC3_DEPCMD_CLEARSTALL (0x05 << 0)
|
|
#define DWC3_DEPCMD_SETSTALL (0x04 << 0)
|
|
/* This applies for core versions 1.90a and earlier */
|
|
#define DWC3_DEPCMD_GETSEQNUMBER (0x03 << 0)
|
|
/* This applies for core versions 1.94a and later */
|
|
#define DWC3_DEPCMD_GETEPSTATE (0x03 << 0)
|
|
#define DWC3_DEPCMD_SETTRANSFRESOURCE (0x02 << 0)
|
|
#define DWC3_DEPCMD_SETEPCONFIG (0x01 << 0)
|
|
|
|
/* The EP number goes 0..31 so ep0 is always out and ep1 is always in */
|
|
#define DWC3_DALEPENA_EP(n) (1 << n)
|
|
|
|
#define DWC3_DEPCMD_TYPE_CONTROL 0
|
|
#define DWC3_DEPCMD_TYPE_ISOC 1
|
|
#define DWC3_DEPCMD_TYPE_BULK 2
|
|
#define DWC3_DEPCMD_TYPE_INTR 3
|
|
|
|
/* Structures */
|
|
|
|
struct dwc3_trb;
|
|
|
|
/**
|
|
* struct dwc3_event_buffer - Software event buffer representation
|
|
* @list: a list of event buffers
|
|
* @buf: _THE_ buffer
|
|
* @length: size of this buffer
|
|
* @dma: dma_addr_t
|
|
* @dwc: pointer to DWC controller
|
|
*/
|
|
struct dwc3_event_buffer {
|
|
void *buf;
|
|
unsigned length;
|
|
unsigned int lpos;
|
|
|
|
dma_addr_t dma;
|
|
|
|
struct dwc3 *dwc;
|
|
};
|
|
|
|
#define DWC3_EP_FLAG_STALLED (1 << 0)
|
|
#define DWC3_EP_FLAG_WEDGED (1 << 1)
|
|
|
|
#define DWC3_EP_DIRECTION_TX true
|
|
#define DWC3_EP_DIRECTION_RX false
|
|
|
|
#define DWC3_TRB_NUM 32
|
|
#define DWC3_TRB_MASK (DWC3_TRB_NUM - 1)
|
|
|
|
/**
|
|
* struct dwc3_ep - device side endpoint representation
|
|
* @endpoint: usb endpoint
|
|
* @request_list: list of requests for this endpoint
|
|
* @req_queued: list of requests on this ep which have TRBs setup
|
|
* @trb_pool: array of transaction buffers
|
|
* @trb_pool_dma: dma address of @trb_pool
|
|
* @free_slot: next slot which is going to be used
|
|
* @busy_slot: first slot which is owned by HW
|
|
* @desc: usb_endpoint_descriptor pointer
|
|
* @dwc: pointer to DWC controller
|
|
* @flags: endpoint flags (wedged, stalled, ...)
|
|
* @current_trb: index of current used trb
|
|
* @number: endpoint number (1 - 15)
|
|
* @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
|
|
* @resource_index: Resource transfer index
|
|
* @interval: the intervall on which the ISOC transfer is started
|
|
* @name: a human readable name e.g. ep1out-bulk
|
|
* @direction: true for TX, false for RX
|
|
* @stream_capable: true when streams are enabled
|
|
*/
|
|
struct dwc3_ep {
|
|
struct usb_ep endpoint;
|
|
struct list_head request_list;
|
|
struct list_head req_queued;
|
|
|
|
struct dwc3_trb *trb_pool;
|
|
dma_addr_t trb_pool_dma;
|
|
u32 free_slot;
|
|
u32 busy_slot;
|
|
const struct usb_ss_ep_comp_descriptor *comp_desc;
|
|
struct dwc3 *dwc;
|
|
|
|
unsigned flags;
|
|
#define DWC3_EP_ENABLED (1 << 0)
|
|
#define DWC3_EP_STALL (1 << 1)
|
|
#define DWC3_EP_WEDGE (1 << 2)
|
|
#define DWC3_EP_BUSY (1 << 4)
|
|
#define DWC3_EP_PENDING_REQUEST (1 << 5)
|
|
#define DWC3_EP_MISSED_ISOC (1 << 6)
|
|
|
|
/* This last one is specific to EP0 */
|
|
#define DWC3_EP0_DIR_IN (1 << 31)
|
|
|
|
unsigned current_trb;
|
|
|
|
u8 number;
|
|
u8 type;
|
|
u8 resource_index;
|
|
u32 interval;
|
|
|
|
char name[20];
|
|
|
|
unsigned direction:1;
|
|
unsigned stream_capable:1;
|
|
};
|
|
|
|
enum dwc3_phy {
|
|
DWC3_PHY_UNKNOWN = 0,
|
|
DWC3_PHY_USB3,
|
|
DWC3_PHY_USB2,
|
|
};
|
|
|
|
enum dwc3_ep0_next {
|
|
DWC3_EP0_UNKNOWN = 0,
|
|
DWC3_EP0_COMPLETE,
|
|
DWC3_EP0_NRDY_DATA,
|
|
DWC3_EP0_NRDY_STATUS,
|
|
};
|
|
|
|
enum dwc3_ep0_state {
|
|
EP0_UNCONNECTED = 0,
|
|
EP0_SETUP_PHASE,
|
|
EP0_DATA_PHASE,
|
|
EP0_STATUS_PHASE,
|
|
};
|
|
|
|
enum dwc3_link_state {
|
|
/* In SuperSpeed */
|
|
DWC3_LINK_STATE_U0 = 0x00, /* in HS, means ON */
|
|
DWC3_LINK_STATE_U1 = 0x01,
|
|
DWC3_LINK_STATE_U2 = 0x02, /* in HS, means SLEEP */
|
|
DWC3_LINK_STATE_U3 = 0x03, /* in HS, means SUSPEND */
|
|
DWC3_LINK_STATE_SS_DIS = 0x04,
|
|
DWC3_LINK_STATE_RX_DET = 0x05, /* in HS, means Early Suspend */
|
|
DWC3_LINK_STATE_SS_INACT = 0x06,
|
|
DWC3_LINK_STATE_POLL = 0x07,
|
|
DWC3_LINK_STATE_RECOV = 0x08,
|
|
DWC3_LINK_STATE_HRESET = 0x09,
|
|
DWC3_LINK_STATE_CMPLY = 0x0a,
|
|
DWC3_LINK_STATE_LPBK = 0x0b,
|
|
DWC3_LINK_STATE_RESET = 0x0e,
|
|
DWC3_LINK_STATE_RESUME = 0x0f,
|
|
DWC3_LINK_STATE_MASK = 0x0f,
|
|
};
|
|
|
|
enum dwc3_device_state {
|
|
DWC3_DEFAULT_STATE,
|
|
DWC3_ADDRESS_STATE,
|
|
DWC3_CONFIGURED_STATE,
|
|
};
|
|
|
|
/* TRB Length, PCM and Status */
|
|
#define DWC3_TRB_SIZE_MASK (0x00ffffff)
|
|
#define DWC3_TRB_SIZE_LENGTH(n) ((n) & DWC3_TRB_SIZE_MASK)
|
|
#define DWC3_TRB_SIZE_PCM1(n) (((n) & 0x03) << 24)
|
|
#define DWC3_TRB_SIZE_TRBSTS(n) (((n) & (0x0f << 28)) >> 28)
|
|
|
|
#define DWC3_TRBSTS_OK 0
|
|
#define DWC3_TRBSTS_MISSED_ISOC 1
|
|
#define DWC3_TRBSTS_SETUP_PENDING 2
|
|
#define DWC3_TRB_STS_XFER_IN_PROG 4
|
|
|
|
/* TRB Control */
|
|
#define DWC3_TRB_CTRL_HWO (1 << 0)
|
|
#define DWC3_TRB_CTRL_LST (1 << 1)
|
|
#define DWC3_TRB_CTRL_CHN (1 << 2)
|
|
#define DWC3_TRB_CTRL_CSP (1 << 3)
|
|
#define DWC3_TRB_CTRL_TRBCTL(n) (((n) & 0x3f) << 4)
|
|
#define DWC3_TRB_CTRL_ISP_IMI (1 << 10)
|
|
#define DWC3_TRB_CTRL_IOC (1 << 11)
|
|
#define DWC3_TRB_CTRL_SID_SOFN(n) (((n) & 0xffff) << 14)
|
|
|
|
#define DWC3_TRBCTL_NORMAL DWC3_TRB_CTRL_TRBCTL(1)
|
|
#define DWC3_TRBCTL_CONTROL_SETUP DWC3_TRB_CTRL_TRBCTL(2)
|
|
#define DWC3_TRBCTL_CONTROL_STATUS2 DWC3_TRB_CTRL_TRBCTL(3)
|
|
#define DWC3_TRBCTL_CONTROL_STATUS3 DWC3_TRB_CTRL_TRBCTL(4)
|
|
#define DWC3_TRBCTL_CONTROL_DATA DWC3_TRB_CTRL_TRBCTL(5)
|
|
#define DWC3_TRBCTL_ISOCHRONOUS_FIRST DWC3_TRB_CTRL_TRBCTL(6)
|
|
#define DWC3_TRBCTL_ISOCHRONOUS DWC3_TRB_CTRL_TRBCTL(7)
|
|
#define DWC3_TRBCTL_LINK_TRB DWC3_TRB_CTRL_TRBCTL(8)
|
|
|
|
/**
|
|
* struct dwc3_trb - transfer request block (hw format)
|
|
* @bpl: DW0-3
|
|
* @bph: DW4-7
|
|
* @size: DW8-B
|
|
* @trl: DWC-F
|
|
*/
|
|
struct dwc3_trb {
|
|
u32 bpl;
|
|
u32 bph;
|
|
u32 size;
|
|
u32 ctrl;
|
|
} __packed;
|
|
|
|
/**
|
|
* dwc3_hwparams - copy of HWPARAMS registers
|
|
* @hwparams0 - GHWPARAMS0
|
|
* @hwparams1 - GHWPARAMS1
|
|
* @hwparams2 - GHWPARAMS2
|
|
* @hwparams3 - GHWPARAMS3
|
|
* @hwparams4 - GHWPARAMS4
|
|
* @hwparams5 - GHWPARAMS5
|
|
* @hwparams6 - GHWPARAMS6
|
|
* @hwparams7 - GHWPARAMS7
|
|
* @hwparams8 - GHWPARAMS8
|
|
*/
|
|
struct dwc3_hwparams {
|
|
u32 hwparams0;
|
|
u32 hwparams1;
|
|
u32 hwparams2;
|
|
u32 hwparams3;
|
|
u32 hwparams4;
|
|
u32 hwparams5;
|
|
u32 hwparams6;
|
|
u32 hwparams7;
|
|
u32 hwparams8;
|
|
};
|
|
|
|
/* HWPARAMS0 */
|
|
#define DWC3_MODE(n) ((n) & 0x7)
|
|
|
|
#define DWC3_MODE_DEVICE 0
|
|
#define DWC3_MODE_HOST 1
|
|
#define DWC3_MODE_DRD 2
|
|
#define DWC3_MODE_HUB 3
|
|
|
|
#define DWC3_MDWIDTH(n) (((n) & 0xff00) >> 8)
|
|
|
|
/* HWPARAMS1 */
|
|
#define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15)
|
|
|
|
/* HWPARAMS7 */
|
|
#define DWC3_RAM1_DEPTH(n) ((n) & 0xffff)
|
|
|
|
struct dwc3_request {
|
|
struct usb_request request;
|
|
struct list_head list;
|
|
struct dwc3_ep *dep;
|
|
u32 start_slot;
|
|
|
|
u8 epnum;
|
|
struct dwc3_trb *trb;
|
|
dma_addr_t trb_dma;
|
|
|
|
unsigned direction:1;
|
|
unsigned mapped:1;
|
|
unsigned queued:1;
|
|
};
|
|
|
|
/*
|
|
* struct dwc3_scratchpad_array - hibernation scratchpad array
|
|
* (format defined by hw)
|
|
*/
|
|
struct dwc3_scratchpad_array {
|
|
__le64 dma_adr[DWC3_MAX_HIBER_SCRATCHBUFS];
|
|
};
|
|
|
|
/**
|
|
* struct dwc3 - representation of our controller
|
|
* @ctrl_req: usb control request which is used for ep0
|
|
* @ep0_trb: trb which is used for the ctrl_req
|
|
* @ep0_bounce: bounce buffer for ep0
|
|
* @setup_buf: used while precessing STD USB requests
|
|
* @ctrl_req_addr: dma address of ctrl_req
|
|
* @ep0_trb: dma address of ep0_trb
|
|
* @ep0_usb_req: dummy req used while handling STD USB requests
|
|
* @ep0_bounce_addr: dma address of ep0_bounce
|
|
* @lock: for synchronizing
|
|
* @dev: pointer to our struct device
|
|
* @xhci: pointer to our xHCI child
|
|
* @event_buffer_list: a list of event buffers
|
|
* @gadget: device side representation of the peripheral controller
|
|
* @gadget_driver: pointer to the gadget driver
|
|
* @regs: base address for our registers
|
|
* @regs_size: address space size
|
|
* @irq: IRQ number
|
|
* @num_event_buffers: calculated number of event buffers
|
|
* @u1u2: only used on revisions <1.83a for workaround
|
|
* @maximum_speed: maximum speed requested (mainly for testing purposes)
|
|
* @revision: revision register contents
|
|
* @mode: mode of operation
|
|
* @usb2_phy: pointer to USB2 PHY
|
|
* @usb3_phy: pointer to USB3 PHY
|
|
* @is_selfpowered: true when we are selfpowered
|
|
* @three_stage_setup: set if we perform a three phase setup
|
|
* @ep0_bounced: true when we used bounce buffer
|
|
* @ep0_expect_in: true when we expect a DATA IN transfer
|
|
* @start_config_issued: true when StartConfig command has been issued
|
|
* @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
|
|
* @needs_fifo_resize: not all users might want fifo resizing, flag it
|
|
* @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
|
|
* @isoch_delay: wValue from Set Isochronous Delay request;
|
|
* @u2sel: parameter from Set SEL request.
|
|
* @u2pel: parameter from Set SEL request.
|
|
* @u1sel: parameter from Set SEL request.
|
|
* @u1pel: parameter from Set SEL request.
|
|
* @ep0_next_event: hold the next expected event
|
|
* @ep0state: state of endpoint zero
|
|
* @link_state: link state
|
|
* @speed: device speed (super, high, full, low)
|
|
* @mem: points to start of memory which is used for this struct.
|
|
* @hwparams: copy of hwparams registers
|
|
* @root: debugfs root folder pointer
|
|
*/
|
|
struct dwc3 {
|
|
struct usb_ctrlrequest *ctrl_req;
|
|
struct dwc3_trb *ep0_trb;
|
|
void *ep0_bounce;
|
|
u8 *setup_buf;
|
|
dma_addr_t ctrl_req_addr;
|
|
dma_addr_t ep0_trb_addr;
|
|
dma_addr_t ep0_bounce_addr;
|
|
struct dwc3_request ep0_usb_req;
|
|
/* device lock */
|
|
spinlock_t lock;
|
|
struct device *dev;
|
|
|
|
struct platform_device *xhci;
|
|
struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM];
|
|
|
|
struct dwc3_event_buffer **ev_buffs;
|
|
struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
|
|
|
|
struct usb_gadget gadget;
|
|
struct usb_gadget_driver *gadget_driver;
|
|
|
|
struct usb_phy *usb2_phy;
|
|
struct usb_phy *usb3_phy;
|
|
|
|
void __iomem *regs;
|
|
size_t regs_size;
|
|
|
|
u32 num_event_buffers;
|
|
u32 u1u2;
|
|
u32 maximum_speed;
|
|
u32 revision;
|
|
u32 mode;
|
|
|
|
#define DWC3_REVISION_173A 0x5533173a
|
|
#define DWC3_REVISION_175A 0x5533175a
|
|
#define DWC3_REVISION_180A 0x5533180a
|
|
#define DWC3_REVISION_183A 0x5533183a
|
|
#define DWC3_REVISION_185A 0x5533185a
|
|
#define DWC3_REVISION_187A 0x5533187a
|
|
#define DWC3_REVISION_188A 0x5533188a
|
|
#define DWC3_REVISION_190A 0x5533190a
|
|
#define DWC3_REVISION_194A 0x5533194a
|
|
#define DWC3_REVISION_200A 0x5533200a
|
|
#define DWC3_REVISION_202A 0x5533202a
|
|
#define DWC3_REVISION_210A 0x5533210a
|
|
#define DWC3_REVISION_220A 0x5533220a
|
|
|
|
unsigned is_selfpowered:1;
|
|
unsigned three_stage_setup:1;
|
|
unsigned ep0_bounced:1;
|
|
unsigned ep0_expect_in:1;
|
|
unsigned start_config_issued:1;
|
|
unsigned setup_packet_pending:1;
|
|
unsigned delayed_status:1;
|
|
unsigned needs_fifo_resize:1;
|
|
unsigned resize_fifos:1;
|
|
|
|
enum dwc3_ep0_next ep0_next_event;
|
|
enum dwc3_ep0_state ep0state;
|
|
enum dwc3_link_state link_state;
|
|
enum dwc3_device_state dev_state;
|
|
|
|
u16 isoch_delay;
|
|
u16 u2sel;
|
|
u16 u2pel;
|
|
u8 u1sel;
|
|
u8 u1pel;
|
|
|
|
u8 speed;
|
|
|
|
void *mem;
|
|
|
|
struct dwc3_hwparams hwparams;
|
|
struct dentry *root;
|
|
struct debugfs_regset32 *regset;
|
|
|
|
u8 test_mode;
|
|
u8 test_mode_nr;
|
|
};
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
struct dwc3_event_type {
|
|
u32 is_devspec:1;
|
|
u32 type:6;
|
|
u32 reserved8_31:25;
|
|
} __packed;
|
|
|
|
#define DWC3_DEPEVT_XFERCOMPLETE 0x01
|
|
#define DWC3_DEPEVT_XFERINPROGRESS 0x02
|
|
#define DWC3_DEPEVT_XFERNOTREADY 0x03
|
|
#define DWC3_DEPEVT_RXTXFIFOEVT 0x04
|
|
#define DWC3_DEPEVT_STREAMEVT 0x06
|
|
#define DWC3_DEPEVT_EPCMDCMPLT 0x07
|
|
|
|
/**
|
|
* struct dwc3_event_depvt - Device Endpoint Events
|
|
* @one_bit: indicates this is an endpoint event (not used)
|
|
* @endpoint_number: number of the endpoint
|
|
* @endpoint_event: The event we have:
|
|
* 0x00 - Reserved
|
|
* 0x01 - XferComplete
|
|
* 0x02 - XferInProgress
|
|
* 0x03 - XferNotReady
|
|
* 0x04 - RxTxFifoEvt (IN->Underrun, OUT->Overrun)
|
|
* 0x05 - Reserved
|
|
* 0x06 - StreamEvt
|
|
* 0x07 - EPCmdCmplt
|
|
* @reserved11_10: Reserved, don't use.
|
|
* @status: Indicates the status of the event. Refer to databook for
|
|
* more information.
|
|
* @parameters: Parameters of the current event. Refer to databook for
|
|
* more information.
|
|
*/
|
|
struct dwc3_event_depevt {
|
|
u32 one_bit:1;
|
|
u32 endpoint_number:5;
|
|
u32 endpoint_event:4;
|
|
u32 reserved11_10:2;
|
|
u32 status:4;
|
|
|
|
/* Within XferNotReady */
|
|
#define DEPEVT_STATUS_TRANSFER_ACTIVE (1 << 3)
|
|
|
|
/* Within XferComplete */
|
|
#define DEPEVT_STATUS_BUSERR (1 << 0)
|
|
#define DEPEVT_STATUS_SHORT (1 << 1)
|
|
#define DEPEVT_STATUS_IOC (1 << 2)
|
|
#define DEPEVT_STATUS_LST (1 << 3)
|
|
|
|
/* Stream event only */
|
|
#define DEPEVT_STREAMEVT_FOUND 1
|
|
#define DEPEVT_STREAMEVT_NOTFOUND 2
|
|
|
|
/* Control-only Status */
|
|
#define DEPEVT_STATUS_CONTROL_DATA 1
|
|
#define DEPEVT_STATUS_CONTROL_STATUS 2
|
|
|
|
u32 parameters:16;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct dwc3_event_devt - Device Events
|
|
* @one_bit: indicates this is a non-endpoint event (not used)
|
|
* @device_event: indicates it's a device event. Should read as 0x00
|
|
* @type: indicates the type of device event.
|
|
* 0 - DisconnEvt
|
|
* 1 - USBRst
|
|
* 2 - ConnectDone
|
|
* 3 - ULStChng
|
|
* 4 - WkUpEvt
|
|
* 5 - Reserved
|
|
* 6 - EOPF
|
|
* 7 - SOF
|
|
* 8 - Reserved
|
|
* 9 - ErrticErr
|
|
* 10 - CmdCmplt
|
|
* 11 - EvntOverflow
|
|
* 12 - VndrDevTstRcved
|
|
* @reserved15_12: Reserved, not used
|
|
* @event_info: Information about this event
|
|
* @reserved31_24: Reserved, not used
|
|
*/
|
|
struct dwc3_event_devt {
|
|
u32 one_bit:1;
|
|
u32 device_event:7;
|
|
u32 type:4;
|
|
u32 reserved15_12:4;
|
|
u32 event_info:8;
|
|
u32 reserved31_24:8;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct dwc3_event_gevt - Other Core Events
|
|
* @one_bit: indicates this is a non-endpoint event (not used)
|
|
* @device_event: indicates it's (0x03) Carkit or (0x04) I2C event.
|
|
* @phy_port_number: self-explanatory
|
|
* @reserved31_12: Reserved, not used.
|
|
*/
|
|
struct dwc3_event_gevt {
|
|
u32 one_bit:1;
|
|
u32 device_event:7;
|
|
u32 phy_port_number:4;
|
|
u32 reserved31_12:20;
|
|
} __packed;
|
|
|
|
/**
|
|
* union dwc3_event - representation of Event Buffer contents
|
|
* @raw: raw 32-bit event
|
|
* @type: the type of the event
|
|
* @depevt: Device Endpoint Event
|
|
* @devt: Device Event
|
|
* @gevt: Global Event
|
|
*/
|
|
union dwc3_event {
|
|
u32 raw;
|
|
struct dwc3_event_type type;
|
|
struct dwc3_event_depevt depevt;
|
|
struct dwc3_event_devt devt;
|
|
struct dwc3_event_gevt gevt;
|
|
};
|
|
|
|
/*
|
|
* DWC3 Features to be used as Driver Data
|
|
*/
|
|
|
|
#define DWC3_HAS_PERIPHERAL BIT(0)
|
|
#define DWC3_HAS_XHCI BIT(1)
|
|
#define DWC3_HAS_OTG BIT(3)
|
|
|
|
/* prototypes */
|
|
void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
|
|
int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
|
|
|
|
int dwc3_host_init(struct dwc3 *dwc);
|
|
void dwc3_host_exit(struct dwc3 *dwc);
|
|
|
|
int dwc3_gadget_init(struct dwc3 *dwc);
|
|
void dwc3_gadget_exit(struct dwc3 *dwc);
|
|
|
|
#endif /* __DRIVERS_USB_DWC3_CORE_H */
|