mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-12 20:56:46 +07:00
18f5ed365d
Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface. This chip includes ARM7 core, and loads and runs program. The firmware is stored in on-board memory and loaded every powering-on from it. Echo Audio ships several versions of firmwares for each model. These firmwares have each quirk and the quirk changes a sequence of packets. As long as I investigated, AudioFire2/AudioFire4/AudioFirePre8 have a quirk to transfer a first packet with 0x02 in its dbc field. This causes ALSA Fireworks driver to detect discontinuity. In this case, firmware version 5.7.0, 5.7.3 and 5.8.0 are used. Payload CIP CIP quadlets header1 header2 02 00050002 90ffffff <- 42 0005000a 90013000 42 00050012 90014400 42 0005001a 90015800 02 0005001a 90ffffff 42 00050022 90019000 42 0005002a 9001a400 42 00050032 9001b800 02 00050032 90ffffff 42 0005003a 9001d000 42 00050042 9001e400 42 0005004a 9001f800 02 0005004a 90ffffff (AudioFire2 with firmware version 5.7.) $ dmesg snd-fireworks fw1.0: Detect discontinuity of CIP: 00 02 These models, AudioFire8 (since Jul 2009 ) and Gibson Robot Interface Pack series uses the same ARM binary as their firmware. Thus, this quirk may be observed among them. This commit adds a new member for AMDTP structure. This member represents the value of dbc field in a first AMDTP packet. Drivers can set it with a preferred value according to model's quirk. Tested-by: Johannes Oertei <johannes.oertel@uni-due.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
299 lines
9.2 KiB
C
299 lines
9.2 KiB
C
#ifndef SOUND_FIREWIRE_AMDTP_H_INCLUDED
|
|
#define SOUND_FIREWIRE_AMDTP_H_INCLUDED
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mutex.h>
|
|
#include <sound/asound.h>
|
|
#include "packets-buffer.h"
|
|
|
|
/**
|
|
* enum cip_flags - describes details of the streaming protocol
|
|
* @CIP_NONBLOCKING: In non-blocking mode, each packet contains
|
|
* sample_rate/8000 samples, with rounding up or down to adjust
|
|
* for clock skew and left-over fractional samples. This should
|
|
* be used if supported by the device.
|
|
* @CIP_BLOCKING: In blocking mode, each packet contains either zero or
|
|
* SYT_INTERVAL samples, with these two types alternating so that
|
|
* the overall sample rate comes out right.
|
|
* @CIP_SYNC_TO_DEVICE: In sync to device mode, time stamp in out packets is
|
|
* generated by in packets. Defaultly this driver generates timestamp.
|
|
* @CIP_EMPTY_WITH_TAG0: Only for in-stream. Empty in-packets have TAG0.
|
|
* @CIP_DBC_IS_END_EVENT: Only for in-stream. The value of dbc in an in-packet
|
|
* corresponds to the end of event in the packet. Out of IEC 61883.
|
|
* @CIP_WRONG_DBS: Only for in-stream. The value of dbs is wrong in in-packets.
|
|
* The value of data_block_quadlets is used instead of reported value.
|
|
* @CIP_SKIP_DBC_ZERO_CHECK: Only for in-stream. Packets with zero in dbc is
|
|
* skipped for detecting discontinuity.
|
|
* @CIP_SKIP_INIT_DBC_CHECK: Only for in-stream. The value of dbc in first
|
|
* packet is not continuous from an initial value.
|
|
* @CIP_EMPTY_HAS_WRONG_DBC: Only for in-stream. The value of dbc in empty
|
|
* packet is wrong but the others are correct.
|
|
* @CIP_JUMBO_PAYLOAD: Only for in-stream. The number of data blocks in an
|
|
* packet is larger than IEC 61883-6 defines. Current implementation
|
|
* allows 5 times as large as IEC 61883-6 defines.
|
|
*/
|
|
enum cip_flags {
|
|
CIP_NONBLOCKING = 0x00,
|
|
CIP_BLOCKING = 0x01,
|
|
CIP_SYNC_TO_DEVICE = 0x02,
|
|
CIP_EMPTY_WITH_TAG0 = 0x04,
|
|
CIP_DBC_IS_END_EVENT = 0x08,
|
|
CIP_WRONG_DBS = 0x10,
|
|
CIP_SKIP_DBC_ZERO_CHECK = 0x20,
|
|
CIP_SKIP_INIT_DBC_CHECK = 0x40,
|
|
CIP_EMPTY_HAS_WRONG_DBC = 0x80,
|
|
CIP_JUMBO_PAYLOAD = 0x100,
|
|
};
|
|
|
|
/**
|
|
* enum cip_sfc - supported Sampling Frequency Codes (SFCs)
|
|
* @CIP_SFC_32000: 32,000 data blocks
|
|
* @CIP_SFC_44100: 44,100 data blocks
|
|
* @CIP_SFC_48000: 48,000 data blocks
|
|
* @CIP_SFC_88200: 88,200 data blocks
|
|
* @CIP_SFC_96000: 96,000 data blocks
|
|
* @CIP_SFC_176400: 176,400 data blocks
|
|
* @CIP_SFC_192000: 192,000 data blocks
|
|
* @CIP_SFC_COUNT: the number of supported SFCs
|
|
*
|
|
* These values are used to show nominal Sampling Frequency Code in
|
|
* Format Dependent Field (FDF) of AMDTP packet header. In IEC 61883-6:2002,
|
|
* this code means the number of events per second. Actually the code
|
|
* represents the number of data blocks transferred per second in an AMDTP
|
|
* stream.
|
|
*
|
|
* In IEC 61883-6:2005, some extensions were added to support more types of
|
|
* data such as 'One Bit LInear Audio', therefore the meaning of SFC became
|
|
* different depending on the types.
|
|
*
|
|
* Currently our implementation is compatible with IEC 61883-6:2002.
|
|
*/
|
|
enum cip_sfc {
|
|
CIP_SFC_32000 = 0,
|
|
CIP_SFC_44100 = 1,
|
|
CIP_SFC_48000 = 2,
|
|
CIP_SFC_88200 = 3,
|
|
CIP_SFC_96000 = 4,
|
|
CIP_SFC_176400 = 5,
|
|
CIP_SFC_192000 = 6,
|
|
CIP_SFC_COUNT
|
|
};
|
|
|
|
#define AMDTP_IN_PCM_FORMAT_BITS SNDRV_PCM_FMTBIT_S32
|
|
|
|
#define AMDTP_OUT_PCM_FORMAT_BITS (SNDRV_PCM_FMTBIT_S16 | \
|
|
SNDRV_PCM_FMTBIT_S32)
|
|
|
|
|
|
/*
|
|
* This module supports maximum 64 PCM channels for one PCM stream
|
|
* This is for our convenience.
|
|
*/
|
|
#define AMDTP_MAX_CHANNELS_FOR_PCM 64
|
|
|
|
/*
|
|
* AMDTP packet can include channels for MIDI conformant data.
|
|
* Each MIDI conformant data channel includes 8 MPX-MIDI data stream.
|
|
* Each MPX-MIDI data stream includes one data stream from/to MIDI ports.
|
|
*
|
|
* This module supports maximum 1 MIDI conformant data channels.
|
|
* Then this AMDTP packets can transfer maximum 8 MIDI data streams.
|
|
*/
|
|
#define AMDTP_MAX_CHANNELS_FOR_MIDI 1
|
|
|
|
struct fw_unit;
|
|
struct fw_iso_context;
|
|
struct snd_pcm_substream;
|
|
struct snd_pcm_runtime;
|
|
struct snd_rawmidi_substream;
|
|
|
|
enum amdtp_stream_direction {
|
|
AMDTP_OUT_STREAM = 0,
|
|
AMDTP_IN_STREAM
|
|
};
|
|
|
|
struct amdtp_stream {
|
|
struct fw_unit *unit;
|
|
enum cip_flags flags;
|
|
enum amdtp_stream_direction direction;
|
|
struct fw_iso_context *context;
|
|
struct mutex mutex;
|
|
|
|
enum cip_sfc sfc;
|
|
unsigned int data_block_quadlets;
|
|
unsigned int pcm_channels;
|
|
unsigned int midi_ports;
|
|
void (*transfer_samples)(struct amdtp_stream *s,
|
|
struct snd_pcm_substream *pcm,
|
|
__be32 *buffer, unsigned int frames);
|
|
u8 pcm_positions[AMDTP_MAX_CHANNELS_FOR_PCM];
|
|
u8 midi_position;
|
|
|
|
unsigned int syt_interval;
|
|
unsigned int transfer_delay;
|
|
unsigned int source_node_id_field;
|
|
struct iso_packets_buffer buffer;
|
|
|
|
struct snd_pcm_substream *pcm;
|
|
struct tasklet_struct period_tasklet;
|
|
|
|
int packet_index;
|
|
unsigned int data_block_counter;
|
|
|
|
unsigned int data_block_state;
|
|
|
|
unsigned int last_syt_offset;
|
|
unsigned int syt_offset_state;
|
|
|
|
unsigned int pcm_buffer_pointer;
|
|
unsigned int pcm_period_pointer;
|
|
bool pointer_flush;
|
|
bool double_pcm_frames;
|
|
|
|
struct snd_rawmidi_substream *midi[AMDTP_MAX_CHANNELS_FOR_MIDI * 8];
|
|
int midi_fifo_limit;
|
|
int midi_fifo_used[AMDTP_MAX_CHANNELS_FOR_MIDI * 8];
|
|
|
|
/* quirk: fixed interval of dbc between previos/current packets. */
|
|
unsigned int tx_dbc_interval;
|
|
/* quirk: indicate the value of dbc field in a first packet. */
|
|
unsigned int tx_first_dbc;
|
|
|
|
bool callbacked;
|
|
wait_queue_head_t callback_wait;
|
|
struct amdtp_stream *sync_slave;
|
|
};
|
|
|
|
int amdtp_stream_init(struct amdtp_stream *s, struct fw_unit *unit,
|
|
enum amdtp_stream_direction dir,
|
|
enum cip_flags flags);
|
|
void amdtp_stream_destroy(struct amdtp_stream *s);
|
|
|
|
void amdtp_stream_set_parameters(struct amdtp_stream *s,
|
|
unsigned int rate,
|
|
unsigned int pcm_channels,
|
|
unsigned int midi_ports);
|
|
unsigned int amdtp_stream_get_max_payload(struct amdtp_stream *s);
|
|
|
|
int amdtp_stream_start(struct amdtp_stream *s, int channel, int speed);
|
|
void amdtp_stream_update(struct amdtp_stream *s);
|
|
void amdtp_stream_stop(struct amdtp_stream *s);
|
|
|
|
int amdtp_stream_add_pcm_hw_constraints(struct amdtp_stream *s,
|
|
struct snd_pcm_runtime *runtime);
|
|
void amdtp_stream_set_pcm_format(struct amdtp_stream *s,
|
|
snd_pcm_format_t format);
|
|
void amdtp_stream_pcm_prepare(struct amdtp_stream *s);
|
|
unsigned long amdtp_stream_pcm_pointer(struct amdtp_stream *s);
|
|
void amdtp_stream_pcm_abort(struct amdtp_stream *s);
|
|
|
|
extern const unsigned int amdtp_syt_intervals[CIP_SFC_COUNT];
|
|
extern const unsigned int amdtp_rate_table[CIP_SFC_COUNT];
|
|
|
|
/**
|
|
* amdtp_stream_running - check stream is running or not
|
|
* @s: the AMDTP stream
|
|
*
|
|
* If this function returns true, the stream is running.
|
|
*/
|
|
static inline bool amdtp_stream_running(struct amdtp_stream *s)
|
|
{
|
|
return !IS_ERR(s->context);
|
|
}
|
|
|
|
/**
|
|
* amdtp_streaming_error - check for streaming error
|
|
* @s: the AMDTP stream
|
|
*
|
|
* If this function returns true, the stream's packet queue has stopped due to
|
|
* an asynchronous error.
|
|
*/
|
|
static inline bool amdtp_streaming_error(struct amdtp_stream *s)
|
|
{
|
|
return s->packet_index < 0;
|
|
}
|
|
|
|
/**
|
|
* amdtp_stream_pcm_running - check PCM substream is running or not
|
|
* @s: the AMDTP stream
|
|
*
|
|
* If this function returns true, PCM substream in the AMDTP stream is running.
|
|
*/
|
|
static inline bool amdtp_stream_pcm_running(struct amdtp_stream *s)
|
|
{
|
|
return !!s->pcm;
|
|
}
|
|
|
|
/**
|
|
* amdtp_stream_pcm_trigger - start/stop playback from a PCM device
|
|
* @s: the AMDTP stream
|
|
* @pcm: the PCM device to be started, or %NULL to stop the current device
|
|
*
|
|
* Call this function on a running isochronous stream to enable the actual
|
|
* transmission of PCM data. This function should be called from the PCM
|
|
* device's .trigger callback.
|
|
*/
|
|
static inline void amdtp_stream_pcm_trigger(struct amdtp_stream *s,
|
|
struct snd_pcm_substream *pcm)
|
|
{
|
|
ACCESS_ONCE(s->pcm) = pcm;
|
|
}
|
|
|
|
/**
|
|
* amdtp_stream_midi_trigger - start/stop playback/capture with a MIDI device
|
|
* @s: the AMDTP stream
|
|
* @port: index of MIDI port
|
|
* @midi: the MIDI device to be started, or %NULL to stop the current device
|
|
*
|
|
* Call this function on a running isochronous stream to enable the actual
|
|
* transmission of MIDI data. This function should be called from the MIDI
|
|
* device's .trigger callback.
|
|
*/
|
|
static inline void amdtp_stream_midi_trigger(struct amdtp_stream *s,
|
|
unsigned int port,
|
|
struct snd_rawmidi_substream *midi)
|
|
{
|
|
if (port < s->midi_ports)
|
|
ACCESS_ONCE(s->midi[port]) = midi;
|
|
}
|
|
|
|
static inline bool cip_sfc_is_base_44100(enum cip_sfc sfc)
|
|
{
|
|
return sfc & 1;
|
|
}
|
|
|
|
static inline void amdtp_stream_set_sync(enum cip_flags sync_mode,
|
|
struct amdtp_stream *master,
|
|
struct amdtp_stream *slave)
|
|
{
|
|
if (sync_mode == CIP_SYNC_TO_DEVICE) {
|
|
master->flags |= CIP_SYNC_TO_DEVICE;
|
|
slave->flags |= CIP_SYNC_TO_DEVICE;
|
|
master->sync_slave = slave;
|
|
} else {
|
|
master->flags &= ~CIP_SYNC_TO_DEVICE;
|
|
slave->flags &= ~CIP_SYNC_TO_DEVICE;
|
|
master->sync_slave = NULL;
|
|
}
|
|
|
|
slave->sync_slave = NULL;
|
|
}
|
|
|
|
/**
|
|
* amdtp_stream_wait_callback - sleep till callbacked or timeout
|
|
* @s: the AMDTP stream
|
|
* @timeout: msec till timeout
|
|
*
|
|
* If this function return false, the AMDTP stream should be stopped.
|
|
*/
|
|
static inline bool amdtp_stream_wait_callback(struct amdtp_stream *s,
|
|
unsigned int timeout)
|
|
{
|
|
return wait_event_timeout(s->callback_wait,
|
|
s->callbacked == true,
|
|
msecs_to_jiffies(timeout)) > 0;
|
|
}
|
|
|
|
#endif
|