linux_dsm_epyc7002/include/linux/futex.h
Darren Hart ba9c22f2c0 futex: remove FUTEX_REQUEUE_PI (non CMP)
The new requeue PI futex op codes were modeled after the existing
FUTEX_REQUEUE and FUTEX_CMP_REQUEUE calls.  I was unaware at the time
that FUTEX_REQUEUE was only around for compatibility reasons and
shouldn't be used in new code.  Ulrich Drepper elaborates on this in his
Futexes are Tricky paper: http://people.redhat.com/drepper/futex.pdf.
The deprecated call doesn't catch changes to the futex corresponding to
the destination futex which can lead to deadlock.

Therefor, I feel it best to remove FUTEX_REQUEUE_PI and leave only
FUTEX_CMP_REQUEUE_PI as there are not yet any existing users of the API.
This patch does change the OP code value of FUTEX_CMP_REQUEUE_PI to 12
from 13.  Since my test case is the only known user of this API, I felt
this was the right thing to do, rather than leave a hole in the
enumeration.

I chose to continue using the _CMP_ modifier in the OP code to make it
explicit to the user that the test is being done.

Builds, boots, and ran several hundred iterations requeue_pi.c.

Signed-off-by: Darren Hart <dvhltc@us.ibm.com>
LKML-Reference: <49ED580E.1050502@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-30 11:41:35 +02:00

216 lines
6.6 KiB
C

#ifndef _LINUX_FUTEX_H
#define _LINUX_FUTEX_H
#include <linux/compiler.h>
#include <linux/types.h>
struct inode;
struct mm_struct;
struct task_struct;
union ktime;
/* Second argument to futex syscall */
#define FUTEX_WAIT 0
#define FUTEX_WAKE 1
#define FUTEX_FD 2
#define FUTEX_REQUEUE 3
#define FUTEX_CMP_REQUEUE 4
#define FUTEX_WAKE_OP 5
#define FUTEX_LOCK_PI 6
#define FUTEX_UNLOCK_PI 7
#define FUTEX_TRYLOCK_PI 8
#define FUTEX_WAIT_BITSET 9
#define FUTEX_WAKE_BITSET 10
#define FUTEX_WAIT_REQUEUE_PI 11
#define FUTEX_CMP_REQUEUE_PI 12
#define FUTEX_PRIVATE_FLAG 128
#define FUTEX_CLOCK_REALTIME 256
#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
#define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
#define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
#define FUTEX_REQUEUE_PRIVATE (FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
#define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
#define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITS | FUTEX_PRIVATE_FLAG)
#define FUTEX_WAKE_BITSET_PRIVATE (FUTEX_WAKE_BITS | FUTEX_PRIVATE_FLAG)
#define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | \
FUTEX_PRIVATE_FLAG)
#define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \
FUTEX_PRIVATE_FLAG)
/*
* Support for robust futexes: the kernel cleans up held futexes at
* thread exit time.
*/
/*
* Per-lock list entry - embedded in user-space locks, somewhere close
* to the futex field. (Note: user-space uses a double-linked list to
* achieve O(1) list add and remove, but the kernel only needs to know
* about the forward link)
*
* NOTE: this structure is part of the syscall ABI, and must not be
* changed.
*/
struct robust_list {
struct robust_list __user *next;
};
/*
* Per-thread list head:
*
* NOTE: this structure is part of the syscall ABI, and must only be
* changed if the change is first communicated with the glibc folks.
* (When an incompatible change is done, we'll increase the structure
* size, which glibc will detect)
*/
struct robust_list_head {
/*
* The head of the list. Points back to itself if empty:
*/
struct robust_list list;
/*
* This relative offset is set by user-space, it gives the kernel
* the relative position of the futex field to examine. This way
* we keep userspace flexible, to freely shape its data-structure,
* without hardcoding any particular offset into the kernel:
*/
long futex_offset;
/*
* The death of the thread may race with userspace setting
* up a lock's links. So to handle this race, userspace first
* sets this field to the address of the to-be-taken lock,
* then does the lock acquire, and then adds itself to the
* list, and then clears this field. Hence the kernel will
* always have full knowledge of all locks that the thread
* _might_ have taken. We check the owner TID in any case,
* so only truly owned locks will be handled.
*/
struct robust_list __user *list_op_pending;
};
/*
* Are there any waiters for this robust futex:
*/
#define FUTEX_WAITERS 0x80000000
/*
* The kernel signals via this bit that a thread holding a futex
* has exited without unlocking the futex. The kernel also does
* a FUTEX_WAKE on such futexes, after setting the bit, to wake
* up any possible waiters:
*/
#define FUTEX_OWNER_DIED 0x40000000
/*
* The rest of the robust-futex field is for the TID:
*/
#define FUTEX_TID_MASK 0x3fffffff
/*
* This limit protects against a deliberately circular list.
* (Not worth introducing an rlimit for it)
*/
#define ROBUST_LIST_LIMIT 2048
/*
* bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
* match of any bit.
*/
#define FUTEX_BITSET_MATCH_ANY 0xffffffff
#ifdef __KERNEL__
long do_futex(u32 __user *uaddr, int op, u32 val, union ktime *timeout,
u32 __user *uaddr2, u32 val2, u32 val3);
extern int
handle_futex_death(u32 __user *uaddr, struct task_struct *curr, int pi);
/*
* Futexes are matched on equal values of this key.
* The key type depends on whether it's a shared or private mapping.
* Don't rearrange members without looking at hash_futex().
*
* offset is aligned to a multiple of sizeof(u32) (== 4) by definition.
* We use the two low order bits of offset to tell what is the kind of key :
* 00 : Private process futex (PTHREAD_PROCESS_PRIVATE)
* (no reference on an inode or mm)
* 01 : Shared futex (PTHREAD_PROCESS_SHARED)
* mapped on a file (reference on the underlying inode)
* 10 : Shared futex (PTHREAD_PROCESS_SHARED)
* (but private mapping on an mm, and reference taken on it)
*/
#define FUT_OFF_INODE 1 /* We set bit 0 if key has a reference on inode */
#define FUT_OFF_MMSHARED 2 /* We set bit 1 if key has a reference on mm */
union futex_key {
struct {
unsigned long pgoff;
struct inode *inode;
int offset;
} shared;
struct {
unsigned long address;
struct mm_struct *mm;
int offset;
} private;
struct {
unsigned long word;
void *ptr;
int offset;
} both;
};
#define FUTEX_KEY_INIT (union futex_key) { .both = { .ptr = NULL } }
#ifdef CONFIG_FUTEX
extern void exit_robust_list(struct task_struct *curr);
extern void exit_pi_state_list(struct task_struct *curr);
extern int futex_cmpxchg_enabled;
#else
static inline void exit_robust_list(struct task_struct *curr)
{
}
static inline void exit_pi_state_list(struct task_struct *curr)
{
}
#endif
#endif /* __KERNEL__ */
#define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */
#define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */
#define FUTEX_OP_OR 2 /* *(int *)UADDR2 |= OPARG; */
#define FUTEX_OP_ANDN 3 /* *(int *)UADDR2 &= ~OPARG; */
#define FUTEX_OP_XOR 4 /* *(int *)UADDR2 ^= OPARG; */
#define FUTEX_OP_OPARG_SHIFT 8 /* Use (1 << OPARG) instead of OPARG. */
#define FUTEX_OP_CMP_EQ 0 /* if (oldval == CMPARG) wake */
#define FUTEX_OP_CMP_NE 1 /* if (oldval != CMPARG) wake */
#define FUTEX_OP_CMP_LT 2 /* if (oldval < CMPARG) wake */
#define FUTEX_OP_CMP_LE 3 /* if (oldval <= CMPARG) wake */
#define FUTEX_OP_CMP_GT 4 /* if (oldval > CMPARG) wake */
#define FUTEX_OP_CMP_GE 5 /* if (oldval >= CMPARG) wake */
/* FUTEX_WAKE_OP will perform atomically
int oldval = *(int *)UADDR2;
*(int *)UADDR2 = oldval OP OPARG;
if (oldval CMP CMPARG)
wake UADDR2; */
#define FUTEX_OP(op, oparg, cmp, cmparg) \
(((op & 0xf) << 28) | ((cmp & 0xf) << 24) \
| ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
#endif