linux_dsm_epyc7002/drivers/vfio/pci/vfio_pci.c
Alex Williamson 8b27ee60bf vfio-pci: PCI hot reset interface
The current VFIO_DEVICE_RESET interface only maps to PCI use cases
where we can isolate the reset to the individual PCI function.  This
means the device must support FLR (PCIe or AF), PM reset on D3hot->D0
transition, device specific reset, or be a singleton device on a bus
for a secondary bus reset.  FLR does not have widespread support,
PM reset is not very reliable, and bus topology is dictated by the
system and device design.  We need to provide a means for a user to
induce a bus reset in cases where the existing mechanisms are not
available or not reliable.

This device specific extension to VFIO provides the user with this
ability.  Two new ioctls are introduced:
 - VFIO_DEVICE_PCI_GET_HOT_RESET_INFO
 - VFIO_DEVICE_PCI_HOT_RESET

The first provides the user with information about the extent of
devices affected by a hot reset.  This is essentially a list of
devices and the IOMMU groups they belong to.  The user may then
initiate a hot reset by calling the second ioctl.  We must be
careful that the user has ownership of all the affected devices
found via the first ioctl, so the second ioctl takes a list of file
descriptors for the VFIO groups affected by the reset.  Each group
must have IOMMU protection established for the ioctl to succeed.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-09-04 11:28:04 -06:00

948 lines
23 KiB
C

/*
* Copyright (C) 2012 Red Hat, Inc. All rights reserved.
* Author: Alex Williamson <alex.williamson@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Derived from original vfio:
* Copyright 2010 Cisco Systems, Inc. All rights reserved.
* Author: Tom Lyon, pugs@cisco.com
*/
#include <linux/device.h>
#include <linux/eventfd.h>
#include <linux/file.h>
#include <linux/interrupt.h>
#include <linux/iommu.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/notifier.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/vfio.h>
#include "vfio_pci_private.h"
#define DRIVER_VERSION "0.2"
#define DRIVER_AUTHOR "Alex Williamson <alex.williamson@redhat.com>"
#define DRIVER_DESC "VFIO PCI - User Level meta-driver"
static bool nointxmask;
module_param_named(nointxmask, nointxmask, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(nointxmask,
"Disable support for PCI 2.3 style INTx masking. If this resolves problems for specific devices, report lspci -vvvxxx to linux-pci@vger.kernel.org so the device can be fixed automatically via the broken_intx_masking flag.");
static int vfio_pci_enable(struct vfio_pci_device *vdev)
{
struct pci_dev *pdev = vdev->pdev;
int ret;
u16 cmd;
u8 msix_pos;
ret = pci_enable_device(pdev);
if (ret)
return ret;
vdev->reset_works = (pci_reset_function(pdev) == 0);
pci_save_state(pdev);
vdev->pci_saved_state = pci_store_saved_state(pdev);
if (!vdev->pci_saved_state)
pr_debug("%s: Couldn't store %s saved state\n",
__func__, dev_name(&pdev->dev));
ret = vfio_config_init(vdev);
if (ret) {
pci_load_and_free_saved_state(pdev, &vdev->pci_saved_state);
pci_disable_device(pdev);
return ret;
}
if (likely(!nointxmask))
vdev->pci_2_3 = pci_intx_mask_supported(pdev);
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
if (vdev->pci_2_3 && (cmd & PCI_COMMAND_INTX_DISABLE)) {
cmd &= ~PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(pdev, PCI_COMMAND, cmd);
}
msix_pos = pdev->msix_cap;
if (msix_pos) {
u16 flags;
u32 table;
pci_read_config_word(pdev, msix_pos + PCI_MSIX_FLAGS, &flags);
pci_read_config_dword(pdev, msix_pos + PCI_MSIX_TABLE, &table);
vdev->msix_bar = table & PCI_MSIX_TABLE_BIR;
vdev->msix_offset = table & PCI_MSIX_TABLE_OFFSET;
vdev->msix_size = ((flags & PCI_MSIX_FLAGS_QSIZE) + 1) * 16;
} else
vdev->msix_bar = 0xFF;
#ifdef CONFIG_VFIO_PCI_VGA
if ((pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA)
vdev->has_vga = true;
#endif
return 0;
}
static void vfio_pci_disable(struct vfio_pci_device *vdev)
{
struct pci_dev *pdev = vdev->pdev;
int bar;
pci_disable_device(pdev);
vfio_pci_set_irqs_ioctl(vdev, VFIO_IRQ_SET_DATA_NONE |
VFIO_IRQ_SET_ACTION_TRIGGER,
vdev->irq_type, 0, 0, NULL);
vdev->virq_disabled = false;
vfio_config_free(vdev);
for (bar = PCI_STD_RESOURCES; bar <= PCI_STD_RESOURCE_END; bar++) {
if (!vdev->barmap[bar])
continue;
pci_iounmap(pdev, vdev->barmap[bar]);
pci_release_selected_regions(pdev, 1 << bar);
vdev->barmap[bar] = NULL;
}
/*
* If we have saved state, restore it. If we can reset the device,
* even better. Resetting with current state seems better than
* nothing, but saving and restoring current state without reset
* is just busy work.
*/
if (pci_load_and_free_saved_state(pdev, &vdev->pci_saved_state)) {
pr_info("%s: Couldn't reload %s saved state\n",
__func__, dev_name(&pdev->dev));
if (!vdev->reset_works)
return;
pci_save_state(pdev);
}
/*
* Disable INTx and MSI, presumably to avoid spurious interrupts
* during reset. Stolen from pci_reset_function()
*/
pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
/*
* Careful, device_lock may already be held. This is the case if
* a driver unbind is blocked. Try to get the locks ourselves to
* prevent a deadlock.
*/
if (vdev->reset_works) {
bool reset_done = false;
if (pci_cfg_access_trylock(pdev)) {
if (device_trylock(&pdev->dev)) {
__pci_reset_function_locked(pdev);
reset_done = true;
device_unlock(&pdev->dev);
}
pci_cfg_access_unlock(pdev);
}
if (!reset_done)
pr_warn("%s: Unable to acquire locks for reset of %s\n",
__func__, dev_name(&pdev->dev));
}
pci_restore_state(pdev);
}
static void vfio_pci_release(void *device_data)
{
struct vfio_pci_device *vdev = device_data;
if (atomic_dec_and_test(&vdev->refcnt))
vfio_pci_disable(vdev);
module_put(THIS_MODULE);
}
static int vfio_pci_open(void *device_data)
{
struct vfio_pci_device *vdev = device_data;
if (!try_module_get(THIS_MODULE))
return -ENODEV;
if (atomic_inc_return(&vdev->refcnt) == 1) {
int ret = vfio_pci_enable(vdev);
if (ret) {
module_put(THIS_MODULE);
return ret;
}
}
return 0;
}
static int vfio_pci_get_irq_count(struct vfio_pci_device *vdev, int irq_type)
{
if (irq_type == VFIO_PCI_INTX_IRQ_INDEX) {
u8 pin;
pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin);
if (pin)
return 1;
} else if (irq_type == VFIO_PCI_MSI_IRQ_INDEX) {
u8 pos;
u16 flags;
pos = vdev->pdev->msi_cap;
if (pos) {
pci_read_config_word(vdev->pdev,
pos + PCI_MSI_FLAGS, &flags);
return 1 << (flags & PCI_MSI_FLAGS_QMASK);
}
} else if (irq_type == VFIO_PCI_MSIX_IRQ_INDEX) {
u8 pos;
u16 flags;
pos = vdev->pdev->msix_cap;
if (pos) {
pci_read_config_word(vdev->pdev,
pos + PCI_MSIX_FLAGS, &flags);
return (flags & PCI_MSIX_FLAGS_QSIZE) + 1;
}
} else if (irq_type == VFIO_PCI_ERR_IRQ_INDEX)
if (pci_is_pcie(vdev->pdev))
return 1;
return 0;
}
static int vfio_pci_count_devs(struct pci_dev *pdev, void *data)
{
(*(int *)data)++;
return 0;
}
struct vfio_pci_fill_info {
int max;
int cur;
struct vfio_pci_dependent_device *devices;
};
static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
{
struct vfio_pci_fill_info *fill = data;
struct iommu_group *iommu_group;
if (fill->cur == fill->max)
return -EAGAIN; /* Something changed, try again */
iommu_group = iommu_group_get(&pdev->dev);
if (!iommu_group)
return -EPERM; /* Cannot reset non-isolated devices */
fill->devices[fill->cur].group_id = iommu_group_id(iommu_group);
fill->devices[fill->cur].segment = pci_domain_nr(pdev->bus);
fill->devices[fill->cur].bus = pdev->bus->number;
fill->devices[fill->cur].devfn = pdev->devfn;
fill->cur++;
iommu_group_put(iommu_group);
return 0;
}
struct vfio_pci_group_entry {
struct vfio_group *group;
int id;
};
struct vfio_pci_group_info {
int count;
struct vfio_pci_group_entry *groups;
};
static int vfio_pci_validate_devs(struct pci_dev *pdev, void *data)
{
struct vfio_pci_group_info *info = data;
struct iommu_group *group;
int id, i;
group = iommu_group_get(&pdev->dev);
if (!group)
return -EPERM;
id = iommu_group_id(group);
for (i = 0; i < info->count; i++)
if (info->groups[i].id == id)
break;
iommu_group_put(group);
return (i == info->count) ? -EINVAL : 0;
}
static bool vfio_pci_dev_below_slot(struct pci_dev *pdev, struct pci_slot *slot)
{
for (; pdev; pdev = pdev->bus->self)
if (pdev->bus == slot->bus)
return (pdev->slot == slot);
return false;
}
struct vfio_pci_walk_info {
int (*fn)(struct pci_dev *, void *data);
void *data;
struct pci_dev *pdev;
bool slot;
int ret;
};
static int vfio_pci_walk_wrapper(struct pci_dev *pdev, void *data)
{
struct vfio_pci_walk_info *walk = data;
if (!walk->slot || vfio_pci_dev_below_slot(pdev, walk->pdev->slot))
walk->ret = walk->fn(pdev, walk->data);
return walk->ret;
}
static int vfio_pci_for_each_slot_or_bus(struct pci_dev *pdev,
int (*fn)(struct pci_dev *,
void *data), void *data,
bool slot)
{
struct vfio_pci_walk_info walk = {
.fn = fn, .data = data, .pdev = pdev, .slot = slot, .ret = 0,
};
pci_walk_bus(pdev->bus, vfio_pci_walk_wrapper, &walk);
return walk.ret;
}
static long vfio_pci_ioctl(void *device_data,
unsigned int cmd, unsigned long arg)
{
struct vfio_pci_device *vdev = device_data;
unsigned long minsz;
if (cmd == VFIO_DEVICE_GET_INFO) {
struct vfio_device_info info;
minsz = offsetofend(struct vfio_device_info, num_irqs);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
info.flags = VFIO_DEVICE_FLAGS_PCI;
if (vdev->reset_works)
info.flags |= VFIO_DEVICE_FLAGS_RESET;
info.num_regions = VFIO_PCI_NUM_REGIONS;
info.num_irqs = VFIO_PCI_NUM_IRQS;
return copy_to_user((void __user *)arg, &info, minsz);
} else if (cmd == VFIO_DEVICE_GET_REGION_INFO) {
struct pci_dev *pdev = vdev->pdev;
struct vfio_region_info info;
minsz = offsetofend(struct vfio_region_info, offset);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
switch (info.index) {
case VFIO_PCI_CONFIG_REGION_INDEX:
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = pdev->cfg_size;
info.flags = VFIO_REGION_INFO_FLAG_READ |
VFIO_REGION_INFO_FLAG_WRITE;
break;
case VFIO_PCI_BAR0_REGION_INDEX ... VFIO_PCI_BAR5_REGION_INDEX:
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = pci_resource_len(pdev, info.index);
if (!info.size) {
info.flags = 0;
break;
}
info.flags = VFIO_REGION_INFO_FLAG_READ |
VFIO_REGION_INFO_FLAG_WRITE;
if (pci_resource_flags(pdev, info.index) &
IORESOURCE_MEM && info.size >= PAGE_SIZE)
info.flags |= VFIO_REGION_INFO_FLAG_MMAP;
break;
case VFIO_PCI_ROM_REGION_INDEX:
{
void __iomem *io;
size_t size;
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.flags = 0;
/* Report the BAR size, not the ROM size */
info.size = pci_resource_len(pdev, info.index);
if (!info.size)
break;
/* Is it really there? */
io = pci_map_rom(pdev, &size);
if (!io || !size) {
info.size = 0;
break;
}
pci_unmap_rom(pdev, io);
info.flags = VFIO_REGION_INFO_FLAG_READ;
break;
}
case VFIO_PCI_VGA_REGION_INDEX:
if (!vdev->has_vga)
return -EINVAL;
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = 0xc0000;
info.flags = VFIO_REGION_INFO_FLAG_READ |
VFIO_REGION_INFO_FLAG_WRITE;
break;
default:
return -EINVAL;
}
return copy_to_user((void __user *)arg, &info, minsz);
} else if (cmd == VFIO_DEVICE_GET_IRQ_INFO) {
struct vfio_irq_info info;
minsz = offsetofend(struct vfio_irq_info, count);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz || info.index >= VFIO_PCI_NUM_IRQS)
return -EINVAL;
switch (info.index) {
case VFIO_PCI_INTX_IRQ_INDEX ... VFIO_PCI_MSIX_IRQ_INDEX:
break;
case VFIO_PCI_ERR_IRQ_INDEX:
if (pci_is_pcie(vdev->pdev))
break;
/* pass thru to return error */
default:
return -EINVAL;
}
info.flags = VFIO_IRQ_INFO_EVENTFD;
info.count = vfio_pci_get_irq_count(vdev, info.index);
if (info.index == VFIO_PCI_INTX_IRQ_INDEX)
info.flags |= (VFIO_IRQ_INFO_MASKABLE |
VFIO_IRQ_INFO_AUTOMASKED);
else
info.flags |= VFIO_IRQ_INFO_NORESIZE;
return copy_to_user((void __user *)arg, &info, minsz);
} else if (cmd == VFIO_DEVICE_SET_IRQS) {
struct vfio_irq_set hdr;
u8 *data = NULL;
int ret = 0;
minsz = offsetofend(struct vfio_irq_set, count);
if (copy_from_user(&hdr, (void __user *)arg, minsz))
return -EFAULT;
if (hdr.argsz < minsz || hdr.index >= VFIO_PCI_NUM_IRQS ||
hdr.flags & ~(VFIO_IRQ_SET_DATA_TYPE_MASK |
VFIO_IRQ_SET_ACTION_TYPE_MASK))
return -EINVAL;
if (!(hdr.flags & VFIO_IRQ_SET_DATA_NONE)) {
size_t size;
int max = vfio_pci_get_irq_count(vdev, hdr.index);
if (hdr.flags & VFIO_IRQ_SET_DATA_BOOL)
size = sizeof(uint8_t);
else if (hdr.flags & VFIO_IRQ_SET_DATA_EVENTFD)
size = sizeof(int32_t);
else
return -EINVAL;
if (hdr.argsz - minsz < hdr.count * size ||
hdr.start >= max || hdr.start + hdr.count > max)
return -EINVAL;
data = memdup_user((void __user *)(arg + minsz),
hdr.count * size);
if (IS_ERR(data))
return PTR_ERR(data);
}
mutex_lock(&vdev->igate);
ret = vfio_pci_set_irqs_ioctl(vdev, hdr.flags, hdr.index,
hdr.start, hdr.count, data);
mutex_unlock(&vdev->igate);
kfree(data);
return ret;
} else if (cmd == VFIO_DEVICE_RESET) {
return vdev->reset_works ?
pci_reset_function(vdev->pdev) : -EINVAL;
} else if (cmd == VFIO_DEVICE_GET_PCI_HOT_RESET_INFO) {
struct vfio_pci_hot_reset_info hdr;
struct vfio_pci_fill_info fill = { 0 };
struct vfio_pci_dependent_device *devices = NULL;
bool slot = false;
int ret = 0;
minsz = offsetofend(struct vfio_pci_hot_reset_info, count);
if (copy_from_user(&hdr, (void __user *)arg, minsz))
return -EFAULT;
if (hdr.argsz < minsz)
return -EINVAL;
hdr.flags = 0;
/* Can we do a slot or bus reset or neither? */
if (!pci_probe_reset_slot(vdev->pdev->slot))
slot = true;
else if (pci_probe_reset_bus(vdev->pdev->bus))
return -ENODEV;
/* How many devices are affected? */
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_count_devs,
&fill.max, slot);
if (ret)
return ret;
WARN_ON(!fill.max); /* Should always be at least one */
/*
* If there's enough space, fill it now, otherwise return
* -ENOSPC and the number of devices affected.
*/
if (hdr.argsz < sizeof(hdr) + (fill.max * sizeof(*devices))) {
ret = -ENOSPC;
hdr.count = fill.max;
goto reset_info_exit;
}
devices = kcalloc(fill.max, sizeof(*devices), GFP_KERNEL);
if (!devices)
return -ENOMEM;
fill.devices = devices;
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_fill_devs,
&fill, slot);
/*
* If a device was removed between counting and filling,
* we may come up short of fill.max. If a device was
* added, we'll have a return of -EAGAIN above.
*/
if (!ret)
hdr.count = fill.cur;
reset_info_exit:
if (copy_to_user((void __user *)arg, &hdr, minsz))
ret = -EFAULT;
if (!ret) {
if (copy_to_user((void __user *)(arg + minsz), devices,
hdr.count * sizeof(*devices)))
ret = -EFAULT;
}
kfree(devices);
return ret;
} else if (cmd == VFIO_DEVICE_PCI_HOT_RESET) {
struct vfio_pci_hot_reset hdr;
int32_t *group_fds;
struct vfio_pci_group_entry *groups;
struct vfio_pci_group_info info;
bool slot = false;
int i, count = 0, ret = 0;
minsz = offsetofend(struct vfio_pci_hot_reset, count);
if (copy_from_user(&hdr, (void __user *)arg, minsz))
return -EFAULT;
if (hdr.argsz < minsz || hdr.flags)
return -EINVAL;
/* Can we do a slot or bus reset or neither? */
if (!pci_probe_reset_slot(vdev->pdev->slot))
slot = true;
else if (pci_probe_reset_bus(vdev->pdev->bus))
return -ENODEV;
/*
* We can't let userspace give us an arbitrarily large
* buffer to copy, so verify how many we think there
* could be. Note groups can have multiple devices so
* one group per device is the max.
*/
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_count_devs,
&count, slot);
if (ret)
return ret;
/* Somewhere between 1 and count is OK */
if (!hdr.count || hdr.count > count)
return -EINVAL;
group_fds = kcalloc(hdr.count, sizeof(*group_fds), GFP_KERNEL);
groups = kcalloc(hdr.count, sizeof(*groups), GFP_KERNEL);
if (!group_fds || !groups) {
kfree(group_fds);
kfree(groups);
return -ENOMEM;
}
if (copy_from_user(group_fds, (void __user *)(arg + minsz),
hdr.count * sizeof(*group_fds))) {
kfree(group_fds);
kfree(groups);
return -EFAULT;
}
/*
* For each group_fd, get the group through the vfio external
* user interface and store the group and iommu ID. This
* ensures the group is held across the reset.
*/
for (i = 0; i < hdr.count; i++) {
struct vfio_group *group;
struct fd f = fdget(group_fds[i]);
if (!f.file) {
ret = -EBADF;
break;
}
group = vfio_group_get_external_user(f.file);
fdput(f);
if (IS_ERR(group)) {
ret = PTR_ERR(group);
break;
}
groups[i].group = group;
groups[i].id = vfio_external_user_iommu_id(group);
}
kfree(group_fds);
/* release reference to groups on error */
if (ret)
goto hot_reset_release;
info.count = hdr.count;
info.groups = groups;
/*
* Test whether all the affected devices are contained
* by the set of groups provided by the user.
*/
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_validate_devs,
&info, slot);
if (!ret)
/* User has access, do the reset */
ret = slot ? pci_reset_slot(vdev->pdev->slot) :
pci_reset_bus(vdev->pdev->bus);
hot_reset_release:
for (i--; i >= 0; i--)
vfio_group_put_external_user(groups[i].group);
kfree(groups);
return ret;
}
return -ENOTTY;
}
static ssize_t vfio_pci_rw(void *device_data, char __user *buf,
size_t count, loff_t *ppos, bool iswrite)
{
unsigned int index = VFIO_PCI_OFFSET_TO_INDEX(*ppos);
struct vfio_pci_device *vdev = device_data;
if (index >= VFIO_PCI_NUM_REGIONS)
return -EINVAL;
switch (index) {
case VFIO_PCI_CONFIG_REGION_INDEX:
return vfio_pci_config_rw(vdev, buf, count, ppos, iswrite);
case VFIO_PCI_ROM_REGION_INDEX:
if (iswrite)
return -EINVAL;
return vfio_pci_bar_rw(vdev, buf, count, ppos, false);
case VFIO_PCI_BAR0_REGION_INDEX ... VFIO_PCI_BAR5_REGION_INDEX:
return vfio_pci_bar_rw(vdev, buf, count, ppos, iswrite);
case VFIO_PCI_VGA_REGION_INDEX:
return vfio_pci_vga_rw(vdev, buf, count, ppos, iswrite);
}
return -EINVAL;
}
static ssize_t vfio_pci_read(void *device_data, char __user *buf,
size_t count, loff_t *ppos)
{
if (!count)
return 0;
return vfio_pci_rw(device_data, buf, count, ppos, false);
}
static ssize_t vfio_pci_write(void *device_data, const char __user *buf,
size_t count, loff_t *ppos)
{
if (!count)
return 0;
return vfio_pci_rw(device_data, (char __user *)buf, count, ppos, true);
}
static int vfio_pci_mmap(void *device_data, struct vm_area_struct *vma)
{
struct vfio_pci_device *vdev = device_data;
struct pci_dev *pdev = vdev->pdev;
unsigned int index;
u64 phys_len, req_len, pgoff, req_start;
int ret;
index = vma->vm_pgoff >> (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT);
if (vma->vm_end < vma->vm_start)
return -EINVAL;
if ((vma->vm_flags & VM_SHARED) == 0)
return -EINVAL;
if (index >= VFIO_PCI_ROM_REGION_INDEX)
return -EINVAL;
if (!(pci_resource_flags(pdev, index) & IORESOURCE_MEM))
return -EINVAL;
phys_len = pci_resource_len(pdev, index);
req_len = vma->vm_end - vma->vm_start;
pgoff = vma->vm_pgoff &
((1U << (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT)) - 1);
req_start = pgoff << PAGE_SHIFT;
if (phys_len < PAGE_SIZE || req_start + req_len > phys_len)
return -EINVAL;
if (index == vdev->msix_bar) {
/*
* Disallow mmaps overlapping the MSI-X table; users don't
* get to touch this directly. We could find somewhere
* else to map the overlap, but page granularity is only
* a recommendation, not a requirement, so the user needs
* to know which bits are real. Requiring them to mmap
* around the table makes that clear.
*/
/* If neither entirely above nor below, then it overlaps */
if (!(req_start >= vdev->msix_offset + vdev->msix_size ||
req_start + req_len <= vdev->msix_offset))
return -EINVAL;
}
/*
* Even though we don't make use of the barmap for the mmap,
* we need to request the region and the barmap tracks that.
*/
if (!vdev->barmap[index]) {
ret = pci_request_selected_regions(pdev,
1 << index, "vfio-pci");
if (ret)
return ret;
vdev->barmap[index] = pci_iomap(pdev, index, 0);
}
vma->vm_private_data = vdev;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
vma->vm_pgoff = (pci_resource_start(pdev, index) >> PAGE_SHIFT) + pgoff;
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
req_len, vma->vm_page_prot);
}
static const struct vfio_device_ops vfio_pci_ops = {
.name = "vfio-pci",
.open = vfio_pci_open,
.release = vfio_pci_release,
.ioctl = vfio_pci_ioctl,
.read = vfio_pci_read,
.write = vfio_pci_write,
.mmap = vfio_pci_mmap,
};
static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
u8 type;
struct vfio_pci_device *vdev;
struct iommu_group *group;
int ret;
pci_read_config_byte(pdev, PCI_HEADER_TYPE, &type);
if ((type & PCI_HEADER_TYPE) != PCI_HEADER_TYPE_NORMAL)
return -EINVAL;
group = iommu_group_get(&pdev->dev);
if (!group)
return -EINVAL;
vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
if (!vdev) {
iommu_group_put(group);
return -ENOMEM;
}
vdev->pdev = pdev;
vdev->irq_type = VFIO_PCI_NUM_IRQS;
mutex_init(&vdev->igate);
spin_lock_init(&vdev->irqlock);
atomic_set(&vdev->refcnt, 0);
ret = vfio_add_group_dev(&pdev->dev, &vfio_pci_ops, vdev);
if (ret) {
iommu_group_put(group);
kfree(vdev);
}
return ret;
}
static void vfio_pci_remove(struct pci_dev *pdev)
{
struct vfio_pci_device *vdev;
vdev = vfio_del_group_dev(&pdev->dev);
if (!vdev)
return;
iommu_group_put(pdev->dev.iommu_group);
kfree(vdev);
}
static pci_ers_result_t vfio_pci_aer_err_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
struct vfio_pci_device *vdev;
struct vfio_device *device;
device = vfio_device_get_from_dev(&pdev->dev);
if (device == NULL)
return PCI_ERS_RESULT_DISCONNECT;
vdev = vfio_device_data(device);
if (vdev == NULL) {
vfio_device_put(device);
return PCI_ERS_RESULT_DISCONNECT;
}
if (vdev->err_trigger)
eventfd_signal(vdev->err_trigger, 1);
vfio_device_put(device);
return PCI_ERS_RESULT_CAN_RECOVER;
}
static struct pci_error_handlers vfio_err_handlers = {
.error_detected = vfio_pci_aer_err_detected,
};
static struct pci_driver vfio_pci_driver = {
.name = "vfio-pci",
.id_table = NULL, /* only dynamic ids */
.probe = vfio_pci_probe,
.remove = vfio_pci_remove,
.err_handler = &vfio_err_handlers,
};
static void __exit vfio_pci_cleanup(void)
{
pci_unregister_driver(&vfio_pci_driver);
vfio_pci_virqfd_exit();
vfio_pci_uninit_perm_bits();
}
static int __init vfio_pci_init(void)
{
int ret;
/* Allocate shared config space permision data used by all devices */
ret = vfio_pci_init_perm_bits();
if (ret)
return ret;
/* Start the virqfd cleanup handler */
ret = vfio_pci_virqfd_init();
if (ret)
goto out_virqfd;
/* Register and scan for devices */
ret = pci_register_driver(&vfio_pci_driver);
if (ret)
goto out_driver;
return 0;
out_driver:
vfio_pci_virqfd_exit();
out_virqfd:
vfio_pci_uninit_perm_bits();
return ret;
}
module_init(vfio_pci_init);
module_exit(vfio_pci_cleanup);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);