mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 21:39:46 +07:00
5d76de61dd
The devices from the ADAU17X1 family all have a MCLK clock input which supplies the master clock for the device. The master clock is used as the input clock for the PLL. Currently the MCLK rate as well as the desired PLL output frequency need to be supplied by calling snd_soc_dai_set_pll() form a machine driver. Add support for specifying the MCLK using the common clock framework. In addition to that also automatically configure the PLL to a suitable rate if the master clock was provided using the CCW. This allows to use the CODEC driver without any special configuration requirements from the machine driver. While the PLL output frequency can be configured over a (more or less) continuous range the narrowness of the range and the other constraints of the clocking tree usually only result in two output frequencies that will actually be chosen. One for 44.1kHz based rates and one for 48kHz based rates, these are the rates that the automatic PLL configuration will use. For the rare case where a non-standard setup is required a machine driver can disable the auto-configuration and configure a custom frequency using the existing mechanisms. If the common clock framework is not enabled clk_get() will return NULL and the driver will function as before and the clock rate needs to be configured manually. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
134 lines
3.9 KiB
C
134 lines
3.9 KiB
C
#ifndef __ADAU17X1_H__
|
|
#define __ADAU17X1_H__
|
|
|
|
#include <linux/regmap.h>
|
|
#include <linux/platform_data/adau17x1.h>
|
|
|
|
#include "sigmadsp.h"
|
|
|
|
enum adau17x1_type {
|
|
ADAU1361,
|
|
ADAU1761,
|
|
ADAU1381,
|
|
ADAU1781,
|
|
};
|
|
|
|
enum adau17x1_pll {
|
|
ADAU17X1_PLL,
|
|
};
|
|
|
|
enum adau17x1_pll_src {
|
|
ADAU17X1_PLL_SRC_MCLK,
|
|
};
|
|
|
|
enum adau17x1_clk_src {
|
|
/* Automatically configure PLL based on the sample rate */
|
|
ADAU17X1_CLK_SRC_PLL_AUTO,
|
|
ADAU17X1_CLK_SRC_MCLK,
|
|
ADAU17X1_CLK_SRC_PLL,
|
|
};
|
|
|
|
struct clk;
|
|
|
|
struct adau {
|
|
unsigned int sysclk;
|
|
unsigned int pll_freq;
|
|
struct clk *mclk;
|
|
|
|
enum adau17x1_clk_src clk_src;
|
|
enum adau17x1_type type;
|
|
void (*switch_mode)(struct device *dev);
|
|
|
|
unsigned int dai_fmt;
|
|
|
|
uint8_t pll_regs[6];
|
|
|
|
bool master;
|
|
|
|
unsigned int tdm_slot[2];
|
|
bool dsp_bypass[2];
|
|
|
|
struct regmap *regmap;
|
|
struct sigmadsp *sigmadsp;
|
|
};
|
|
|
|
int adau17x1_add_widgets(struct snd_soc_codec *codec);
|
|
int adau17x1_add_routes(struct snd_soc_codec *codec);
|
|
int adau17x1_probe(struct device *dev, struct regmap *regmap,
|
|
enum adau17x1_type type, void (*switch_mode)(struct device *dev),
|
|
const char *firmware_name);
|
|
void adau17x1_remove(struct device *dev);
|
|
int adau17x1_set_micbias_voltage(struct snd_soc_codec *codec,
|
|
enum adau17x1_micbias_voltage micbias);
|
|
bool adau17x1_readable_register(struct device *dev, unsigned int reg);
|
|
bool adau17x1_volatile_register(struct device *dev, unsigned int reg);
|
|
bool adau17x1_precious_register(struct device *dev, unsigned int reg);
|
|
int adau17x1_resume(struct snd_soc_codec *codec);
|
|
|
|
extern const struct snd_soc_dai_ops adau17x1_dai_ops;
|
|
|
|
int adau17x1_setup_firmware(struct adau *adau, unsigned int rate);
|
|
bool adau17x1_has_dsp(struct adau *adau);
|
|
|
|
#define ADAU17X1_CLOCK_CONTROL 0x4000
|
|
#define ADAU17X1_PLL_CONTROL 0x4002
|
|
#define ADAU17X1_REC_POWER_MGMT 0x4009
|
|
#define ADAU17X1_MICBIAS 0x4010
|
|
#define ADAU17X1_SERIAL_PORT0 0x4015
|
|
#define ADAU17X1_SERIAL_PORT1 0x4016
|
|
#define ADAU17X1_CONVERTER0 0x4017
|
|
#define ADAU17X1_CONVERTER1 0x4018
|
|
#define ADAU17X1_LEFT_INPUT_DIGITAL_VOL 0x401a
|
|
#define ADAU17X1_RIGHT_INPUT_DIGITAL_VOL 0x401b
|
|
#define ADAU17X1_ADC_CONTROL 0x4019
|
|
#define ADAU17X1_PLAY_POWER_MGMT 0x4029
|
|
#define ADAU17X1_DAC_CONTROL0 0x402a
|
|
#define ADAU17X1_DAC_CONTROL1 0x402b
|
|
#define ADAU17X1_DAC_CONTROL2 0x402c
|
|
#define ADAU17X1_SERIAL_PORT_PAD 0x402d
|
|
#define ADAU17X1_CONTROL_PORT_PAD0 0x402f
|
|
#define ADAU17X1_CONTROL_PORT_PAD1 0x4030
|
|
#define ADAU17X1_DSP_SAMPLING_RATE 0x40eb
|
|
#define ADAU17X1_SERIAL_INPUT_ROUTE 0x40f2
|
|
#define ADAU17X1_SERIAL_OUTPUT_ROUTE 0x40f3
|
|
#define ADAU17X1_DSP_ENABLE 0x40f5
|
|
#define ADAU17X1_DSP_RUN 0x40f6
|
|
#define ADAU17X1_SERIAL_SAMPLING_RATE 0x40f8
|
|
|
|
#define ADAU17X1_SERIAL_PORT0_BCLK_POL BIT(4)
|
|
#define ADAU17X1_SERIAL_PORT0_LRCLK_POL BIT(3)
|
|
#define ADAU17X1_SERIAL_PORT0_MASTER BIT(0)
|
|
|
|
#define ADAU17X1_SERIAL_PORT1_DELAY1 0x00
|
|
#define ADAU17X1_SERIAL_PORT1_DELAY0 0x01
|
|
#define ADAU17X1_SERIAL_PORT1_DELAY8 0x02
|
|
#define ADAU17X1_SERIAL_PORT1_DELAY16 0x03
|
|
#define ADAU17X1_SERIAL_PORT1_DELAY_MASK 0x03
|
|
|
|
#define ADAU17X1_CLOCK_CONTROL_INFREQ_MASK 0x6
|
|
#define ADAU17X1_CLOCK_CONTROL_CORECLK_SRC_PLL BIT(3)
|
|
#define ADAU17X1_CLOCK_CONTROL_SYSCLK_EN BIT(0)
|
|
|
|
#define ADAU17X1_SERIAL_PORT1_BCLK64 (0x0 << 5)
|
|
#define ADAU17X1_SERIAL_PORT1_BCLK32 (0x1 << 5)
|
|
#define ADAU17X1_SERIAL_PORT1_BCLK48 (0x2 << 5)
|
|
#define ADAU17X1_SERIAL_PORT1_BCLK128 (0x3 << 5)
|
|
#define ADAU17X1_SERIAL_PORT1_BCLK256 (0x4 << 5)
|
|
#define ADAU17X1_SERIAL_PORT1_BCLK_MASK (0x7 << 5)
|
|
|
|
#define ADAU17X1_SERIAL_PORT0_STEREO (0x0 << 1)
|
|
#define ADAU17X1_SERIAL_PORT0_TDM4 (0x1 << 1)
|
|
#define ADAU17X1_SERIAL_PORT0_TDM8 (0x2 << 1)
|
|
#define ADAU17X1_SERIAL_PORT0_TDM_MASK (0x3 << 1)
|
|
#define ADAU17X1_SERIAL_PORT0_PULSE_MODE BIT(5)
|
|
|
|
#define ADAU17X1_CONVERTER0_DAC_PAIR(x) (((x) - 1) << 5)
|
|
#define ADAU17X1_CONVERTER0_DAC_PAIR_MASK (0x3 << 5)
|
|
#define ADAU17X1_CONVERTER1_ADC_PAIR(x) ((x) - 1)
|
|
#define ADAU17X1_CONVERTER1_ADC_PAIR_MASK 0x3
|
|
|
|
#define ADAU17X1_CONVERTER0_CONVSR_MASK 0x7
|
|
|
|
|
|
#endif
|