linux_dsm_epyc7002/drivers/media/platform/vsp1/vsp1_hgt.c
Laurent Pinchart b36c6049ed media: vsp1: Add vsp1_dl_list argument to .configure_stream() operation
The WPF needs access to the current display list to configure writeback.
Add a display list pointer to the VSP1 entity .configure_stream()
operation.

Only display pipelines can make use of the display list there as
mem-to-mem pipelines don't have access to a display list at stream
configuration time. This is not an issue as writeback is only used for
display pipelines.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-18 17:23:56 +02:00

216 lines
5.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* vsp1_hgt.c -- R-Car VSP1 Histogram Generator 2D
*
* Copyright (C) 2016 Renesas Electronics Corporation
*
* Contact: Niklas Söderlund (niklas.soderlund@ragnatech.se)
*/
#include <linux/device.h>
#include <linux/gfp.h>
#include <media/v4l2-subdev.h>
#include <media/videobuf2-vmalloc.h>
#include "vsp1.h"
#include "vsp1_dl.h"
#include "vsp1_hgt.h"
#define HGT_DATA_SIZE ((2 + 6 * 32) * 4)
/* -----------------------------------------------------------------------------
* Device Access
*/
static inline u32 vsp1_hgt_read(struct vsp1_hgt *hgt, u32 reg)
{
return vsp1_read(hgt->histo.entity.vsp1, reg);
}
static inline void vsp1_hgt_write(struct vsp1_hgt *hgt,
struct vsp1_dl_body *dlb, u32 reg, u32 data)
{
vsp1_dl_body_write(dlb, reg, data);
}
/* -----------------------------------------------------------------------------
* Frame End Handler
*/
void vsp1_hgt_frame_end(struct vsp1_entity *entity)
{
struct vsp1_hgt *hgt = to_hgt(&entity->subdev);
struct vsp1_histogram_buffer *buf;
unsigned int m;
unsigned int n;
u32 *data;
buf = vsp1_histogram_buffer_get(&hgt->histo);
if (!buf)
return;
data = buf->addr;
*data++ = vsp1_hgt_read(hgt, VI6_HGT_MAXMIN);
*data++ = vsp1_hgt_read(hgt, VI6_HGT_SUM);
for (m = 0; m < 6; ++m)
for (n = 0; n < 32; ++n)
*data++ = vsp1_hgt_read(hgt, VI6_HGT_HISTO(m, n));
vsp1_histogram_buffer_complete(&hgt->histo, buf, HGT_DATA_SIZE);
}
/* -----------------------------------------------------------------------------
* Controls
*/
#define V4L2_CID_VSP1_HGT_HUE_AREAS (V4L2_CID_USER_BASE | 0x1001)
static int hgt_hue_areas_try_ctrl(struct v4l2_ctrl *ctrl)
{
const u8 *values = ctrl->p_new.p_u8;
unsigned int i;
/*
* The hardware has constraints on the hue area boundaries beyond the
* control min, max and step. The values must match one of the following
* expressions.
*
* 0L <= 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U
* 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U <= 0L
*
* Start by verifying the common part...
*/
for (i = 1; i < (HGT_NUM_HUE_AREAS * 2) - 1; ++i) {
if (values[i] > values[i+1])
return -EINVAL;
}
/* ... and handle 0L separately. */
if (values[0] > values[1] && values[11] > values[0])
return -EINVAL;
return 0;
}
static int hgt_hue_areas_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct vsp1_hgt *hgt = container_of(ctrl->handler, struct vsp1_hgt,
ctrls);
memcpy(hgt->hue_areas, ctrl->p_new.p_u8, sizeof(hgt->hue_areas));
return 0;
}
static const struct v4l2_ctrl_ops hgt_hue_areas_ctrl_ops = {
.try_ctrl = hgt_hue_areas_try_ctrl,
.s_ctrl = hgt_hue_areas_s_ctrl,
};
static const struct v4l2_ctrl_config hgt_hue_areas = {
.ops = &hgt_hue_areas_ctrl_ops,
.id = V4L2_CID_VSP1_HGT_HUE_AREAS,
.name = "Boundary Values for Hue Area",
.type = V4L2_CTRL_TYPE_U8,
.min = 0,
.max = 255,
.def = 0,
.step = 1,
.dims = { 12 },
};
/* -----------------------------------------------------------------------------
* VSP1 Entity Operations
*/
static void hgt_configure_stream(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl,
struct vsp1_dl_body *dlb)
{
struct vsp1_hgt *hgt = to_hgt(&entity->subdev);
struct v4l2_rect *compose;
struct v4l2_rect *crop;
unsigned int hratio;
unsigned int vratio;
u8 lower;
u8 upper;
unsigned int i;
crop = vsp1_entity_get_pad_selection(entity, entity->config,
HISTO_PAD_SINK, V4L2_SEL_TGT_CROP);
compose = vsp1_entity_get_pad_selection(entity, entity->config,
HISTO_PAD_SINK,
V4L2_SEL_TGT_COMPOSE);
vsp1_hgt_write(hgt, dlb, VI6_HGT_REGRST, VI6_HGT_REGRST_RCLEA);
vsp1_hgt_write(hgt, dlb, VI6_HGT_OFFSET,
(crop->left << VI6_HGT_OFFSET_HOFFSET_SHIFT) |
(crop->top << VI6_HGT_OFFSET_VOFFSET_SHIFT));
vsp1_hgt_write(hgt, dlb, VI6_HGT_SIZE,
(crop->width << VI6_HGT_SIZE_HSIZE_SHIFT) |
(crop->height << VI6_HGT_SIZE_VSIZE_SHIFT));
mutex_lock(hgt->ctrls.lock);
for (i = 0; i < HGT_NUM_HUE_AREAS; ++i) {
lower = hgt->hue_areas[i*2 + 0];
upper = hgt->hue_areas[i*2 + 1];
vsp1_hgt_write(hgt, dlb, VI6_HGT_HUE_AREA(i),
(lower << VI6_HGT_HUE_AREA_LOWER_SHIFT) |
(upper << VI6_HGT_HUE_AREA_UPPER_SHIFT));
}
mutex_unlock(hgt->ctrls.lock);
hratio = crop->width * 2 / compose->width / 3;
vratio = crop->height * 2 / compose->height / 3;
vsp1_hgt_write(hgt, dlb, VI6_HGT_MODE,
(hratio << VI6_HGT_MODE_HRATIO_SHIFT) |
(vratio << VI6_HGT_MODE_VRATIO_SHIFT));
}
static const struct vsp1_entity_operations hgt_entity_ops = {
.configure_stream = hgt_configure_stream,
.destroy = vsp1_histogram_destroy,
};
/* -----------------------------------------------------------------------------
* Initialization and Cleanup
*/
static const unsigned int hgt_mbus_formats[] = {
MEDIA_BUS_FMT_AHSV8888_1X32,
};
struct vsp1_hgt *vsp1_hgt_create(struct vsp1_device *vsp1)
{
struct vsp1_hgt *hgt;
int ret;
hgt = devm_kzalloc(vsp1->dev, sizeof(*hgt), GFP_KERNEL);
if (hgt == NULL)
return ERR_PTR(-ENOMEM);
/* Initialize the control handler. */
v4l2_ctrl_handler_init(&hgt->ctrls, 1);
v4l2_ctrl_new_custom(&hgt->ctrls, &hgt_hue_areas, NULL);
hgt->histo.entity.subdev.ctrl_handler = &hgt->ctrls;
/* Initialize the video device and queue for statistics data. */
ret = vsp1_histogram_init(vsp1, &hgt->histo, VSP1_ENTITY_HGT, "hgt",
&hgt_entity_ops, hgt_mbus_formats,
ARRAY_SIZE(hgt_mbus_formats),
HGT_DATA_SIZE, V4L2_META_FMT_VSP1_HGT);
if (ret < 0) {
vsp1_entity_destroy(&hgt->histo.entity);
return ERR_PTR(ret);
}
v4l2_ctrl_handler_setup(&hgt->ctrls);
return hgt;
}