mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 07:36:56 +07:00
4f2568f5cb
Every attempt to issue a read log page command lockup the controller. The command is currently sent if the sata device includes the devlsp feature to read out the timing data. This attempt to read the data, locks up the controller and the device is not recognzied correctly (failed to set xfermode) and cannot be accessed. This was found on Freescale P1013/P1022 and T4240 CPUs using a ATP IG mSATA 4GB with the devslp feature. fsl-sata ff718000.sata: Sata FSL Platform/CSB Driver init [ 1.254195] scsi0 : sata_fsl [ 1.256004] ata1: SATA max UDMA/133 irq 74 [ 1.370666] fsl-gianfar ethernet.3: enabled errata workarounds, flags: 0x4 [ 1.470671] fsl-gianfar ethernet.4: enabled errata workarounds, flags: 0x4 [ 1.775584] ata1: Signature Update detected @ 504 msecs [ 1.947594] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.948366] ata1.00: ATA-8: ATP IG mSATA, 20150311, max UDMA/133 [ 1.948371] ata1.00: 7732368 sectors, multi 0: LBA [ 1.948843] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.948857] ata1.00: failed to set xfermode (err_mask=0x40) [ 7.467557] ata1: Signature Update detected @ 504 msecs [ 7.639560] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.651320] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 7.651360] ata1.00: failed to set xfermode (err_mask=0x40) [ 7.655628] ata1: limiting SATA link speed to 1.5 Gbps [ 7.659458] ata1.00: limiting speed to UDMA/133:PIO3 [ 13.163554] ata1: Signature Update detected @ 504 msecs [ 13.335558] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.347298] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 13.347334] ata1.00: failed to set xfermode (err_mask=0x40) [ 13.351601] ata1.00: disabled [ 13.353278] ata1: exception Emask 0x50 SAct 0x0 SErr 0x800 action 0x6 frozen t4 [ 13.359281] ata1: SError: { HostInt } [ 13.361644] ata1: hard resetting link Signed-off-by: Andreas Werner <andreas.werner@men.de> Signed-off-by: Tejun Heo <tj@kernel.org>
1646 lines
43 KiB
C
1646 lines
43 KiB
C
/*
|
|
* drivers/ata/sata_fsl.c
|
|
*
|
|
* Freescale 3.0Gbps SATA device driver
|
|
*
|
|
* Author: Ashish Kalra <ashish.kalra@freescale.com>
|
|
* Li Yang <leoli@freescale.com>
|
|
*
|
|
* Copyright (c) 2006-2007, 2011-2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <linux/libata.h>
|
|
#include <asm/io.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
static unsigned int intr_coalescing_count;
|
|
module_param(intr_coalescing_count, int, S_IRUGO);
|
|
MODULE_PARM_DESC(intr_coalescing_count,
|
|
"INT coalescing count threshold (1..31)");
|
|
|
|
static unsigned int intr_coalescing_ticks;
|
|
module_param(intr_coalescing_ticks, int, S_IRUGO);
|
|
MODULE_PARM_DESC(intr_coalescing_ticks,
|
|
"INT coalescing timer threshold in AHB ticks");
|
|
/* Controller information */
|
|
enum {
|
|
SATA_FSL_QUEUE_DEPTH = 16,
|
|
SATA_FSL_MAX_PRD = 63,
|
|
SATA_FSL_MAX_PRD_USABLE = SATA_FSL_MAX_PRD - 1,
|
|
SATA_FSL_MAX_PRD_DIRECT = 16, /* Direct PRDT entries */
|
|
|
|
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
|
|
ATA_FLAG_PMP | ATA_FLAG_NCQ |
|
|
ATA_FLAG_AN | ATA_FLAG_NO_LOG_PAGE),
|
|
|
|
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
|
|
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
|
|
SATA_FSL_CMD_SLOT_SIZE = (SATA_FSL_MAX_CMDS * SATA_FSL_CMD_HDR_SIZE),
|
|
|
|
/*
|
|
* SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
|
|
* chained indirect PRDEs up to a max count of 63.
|
|
* We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will
|
|
* be setup as an indirect descriptor, pointing to it's next
|
|
* (contiguous) PRDE. Though chained indirect PRDE arrays are
|
|
* supported,it will be more efficient to use a direct PRDT and
|
|
* a single chain/link to indirect PRDE array/PRDT.
|
|
*/
|
|
|
|
SATA_FSL_CMD_DESC_CFIS_SZ = 32,
|
|
SATA_FSL_CMD_DESC_SFIS_SZ = 32,
|
|
SATA_FSL_CMD_DESC_ACMD_SZ = 16,
|
|
SATA_FSL_CMD_DESC_RSRVD = 16,
|
|
|
|
SATA_FSL_CMD_DESC_SIZE = (SATA_FSL_CMD_DESC_CFIS_SZ +
|
|
SATA_FSL_CMD_DESC_SFIS_SZ +
|
|
SATA_FSL_CMD_DESC_ACMD_SZ +
|
|
SATA_FSL_CMD_DESC_RSRVD +
|
|
SATA_FSL_MAX_PRD * 16),
|
|
|
|
SATA_FSL_CMD_DESC_OFFSET_TO_PRDT =
|
|
(SATA_FSL_CMD_DESC_CFIS_SZ +
|
|
SATA_FSL_CMD_DESC_SFIS_SZ +
|
|
SATA_FSL_CMD_DESC_ACMD_SZ +
|
|
SATA_FSL_CMD_DESC_RSRVD),
|
|
|
|
SATA_FSL_CMD_DESC_AR_SZ = (SATA_FSL_CMD_DESC_SIZE * SATA_FSL_MAX_CMDS),
|
|
SATA_FSL_PORT_PRIV_DMA_SZ = (SATA_FSL_CMD_SLOT_SIZE +
|
|
SATA_FSL_CMD_DESC_AR_SZ),
|
|
|
|
/*
|
|
* MPC8315 has two SATA controllers, SATA1 & SATA2
|
|
* (one port per controller)
|
|
* MPC837x has 2/4 controllers, one port per controller
|
|
*/
|
|
|
|
SATA_FSL_MAX_PORTS = 1,
|
|
|
|
SATA_FSL_IRQ_FLAG = IRQF_SHARED,
|
|
};
|
|
|
|
/*
|
|
* Interrupt Coalescing Control Register bitdefs */
|
|
enum {
|
|
ICC_MIN_INT_COUNT_THRESHOLD = 1,
|
|
ICC_MAX_INT_COUNT_THRESHOLD = ((1 << 5) - 1),
|
|
ICC_MIN_INT_TICKS_THRESHOLD = 0,
|
|
ICC_MAX_INT_TICKS_THRESHOLD = ((1 << 19) - 1),
|
|
ICC_SAFE_INT_TICKS = 1,
|
|
};
|
|
|
|
/*
|
|
* Host Controller command register set - per port
|
|
*/
|
|
enum {
|
|
CQ = 0,
|
|
CA = 8,
|
|
CC = 0x10,
|
|
CE = 0x18,
|
|
DE = 0x20,
|
|
CHBA = 0x24,
|
|
HSTATUS = 0x28,
|
|
HCONTROL = 0x2C,
|
|
CQPMP = 0x30,
|
|
SIGNATURE = 0x34,
|
|
ICC = 0x38,
|
|
|
|
/*
|
|
* Host Status Register (HStatus) bitdefs
|
|
*/
|
|
ONLINE = (1 << 31),
|
|
GOING_OFFLINE = (1 << 30),
|
|
BIST_ERR = (1 << 29),
|
|
CLEAR_ERROR = (1 << 27),
|
|
|
|
FATAL_ERR_HC_MASTER_ERR = (1 << 18),
|
|
FATAL_ERR_PARITY_ERR_TX = (1 << 17),
|
|
FATAL_ERR_PARITY_ERR_RX = (1 << 16),
|
|
FATAL_ERR_DATA_UNDERRUN = (1 << 13),
|
|
FATAL_ERR_DATA_OVERRUN = (1 << 12),
|
|
FATAL_ERR_CRC_ERR_TX = (1 << 11),
|
|
FATAL_ERR_CRC_ERR_RX = (1 << 10),
|
|
FATAL_ERR_FIFO_OVRFL_TX = (1 << 9),
|
|
FATAL_ERR_FIFO_OVRFL_RX = (1 << 8),
|
|
|
|
FATAL_ERROR_DECODE = FATAL_ERR_HC_MASTER_ERR |
|
|
FATAL_ERR_PARITY_ERR_TX |
|
|
FATAL_ERR_PARITY_ERR_RX |
|
|
FATAL_ERR_DATA_UNDERRUN |
|
|
FATAL_ERR_DATA_OVERRUN |
|
|
FATAL_ERR_CRC_ERR_TX |
|
|
FATAL_ERR_CRC_ERR_RX |
|
|
FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX,
|
|
|
|
INT_ON_DATA_LENGTH_MISMATCH = (1 << 12),
|
|
INT_ON_FATAL_ERR = (1 << 5),
|
|
INT_ON_PHYRDY_CHG = (1 << 4),
|
|
|
|
INT_ON_SIGNATURE_UPDATE = (1 << 3),
|
|
INT_ON_SNOTIFY_UPDATE = (1 << 2),
|
|
INT_ON_SINGL_DEVICE_ERR = (1 << 1),
|
|
INT_ON_CMD_COMPLETE = 1,
|
|
|
|
INT_ON_ERROR = INT_ON_FATAL_ERR | INT_ON_SNOTIFY_UPDATE |
|
|
INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR,
|
|
|
|
/*
|
|
* Host Control Register (HControl) bitdefs
|
|
*/
|
|
HCONTROL_ONLINE_PHY_RST = (1 << 31),
|
|
HCONTROL_FORCE_OFFLINE = (1 << 30),
|
|
HCONTROL_LEGACY = (1 << 28),
|
|
HCONTROL_PARITY_PROT_MOD = (1 << 14),
|
|
HCONTROL_DPATH_PARITY = (1 << 12),
|
|
HCONTROL_SNOOP_ENABLE = (1 << 10),
|
|
HCONTROL_PMP_ATTACHED = (1 << 9),
|
|
HCONTROL_COPYOUT_STATFIS = (1 << 8),
|
|
IE_ON_FATAL_ERR = (1 << 5),
|
|
IE_ON_PHYRDY_CHG = (1 << 4),
|
|
IE_ON_SIGNATURE_UPDATE = (1 << 3),
|
|
IE_ON_SNOTIFY_UPDATE = (1 << 2),
|
|
IE_ON_SINGL_DEVICE_ERR = (1 << 1),
|
|
IE_ON_CMD_COMPLETE = 1,
|
|
|
|
DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG |
|
|
IE_ON_SIGNATURE_UPDATE | IE_ON_SNOTIFY_UPDATE |
|
|
IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE,
|
|
|
|
EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31),
|
|
DATA_SNOOP_ENABLE_V1 = (1 << 22),
|
|
DATA_SNOOP_ENABLE_V2 = (1 << 28),
|
|
};
|
|
|
|
/*
|
|
* SATA Superset Registers
|
|
*/
|
|
enum {
|
|
SSTATUS = 0,
|
|
SERROR = 4,
|
|
SCONTROL = 8,
|
|
SNOTIFY = 0xC,
|
|
};
|
|
|
|
/*
|
|
* Control Status Register Set
|
|
*/
|
|
enum {
|
|
TRANSCFG = 0,
|
|
TRANSSTATUS = 4,
|
|
LINKCFG = 8,
|
|
LINKCFG1 = 0xC,
|
|
LINKCFG2 = 0x10,
|
|
LINKSTATUS = 0x14,
|
|
LINKSTATUS1 = 0x18,
|
|
PHYCTRLCFG = 0x1C,
|
|
COMMANDSTAT = 0x20,
|
|
};
|
|
|
|
/* TRANSCFG (transport-layer) configuration control */
|
|
enum {
|
|
TRANSCFG_RX_WATER_MARK = (1 << 4),
|
|
};
|
|
|
|
/* PHY (link-layer) configuration control */
|
|
enum {
|
|
PHY_BIST_ENABLE = 0x01,
|
|
};
|
|
|
|
/*
|
|
* Command Header Table entry, i.e, command slot
|
|
* 4 Dwords per command slot, command header size == 64 Dwords.
|
|
*/
|
|
struct cmdhdr_tbl_entry {
|
|
u32 cda;
|
|
u32 prde_fis_len;
|
|
u32 ttl;
|
|
u32 desc_info;
|
|
};
|
|
|
|
/*
|
|
* Description information bitdefs
|
|
*/
|
|
enum {
|
|
CMD_DESC_RES = (1 << 11),
|
|
VENDOR_SPECIFIC_BIST = (1 << 10),
|
|
CMD_DESC_SNOOP_ENABLE = (1 << 9),
|
|
FPDMA_QUEUED_CMD = (1 << 8),
|
|
SRST_CMD = (1 << 7),
|
|
BIST = (1 << 6),
|
|
ATAPI_CMD = (1 << 5),
|
|
};
|
|
|
|
/*
|
|
* Command Descriptor
|
|
*/
|
|
struct command_desc {
|
|
u8 cfis[8 * 4];
|
|
u8 sfis[8 * 4];
|
|
u8 acmd[4 * 4];
|
|
u8 fill[4 * 4];
|
|
u32 prdt[SATA_FSL_MAX_PRD_DIRECT * 4];
|
|
u32 prdt_indirect[(SATA_FSL_MAX_PRD - SATA_FSL_MAX_PRD_DIRECT) * 4];
|
|
};
|
|
|
|
/*
|
|
* Physical region table descriptor(PRD)
|
|
*/
|
|
|
|
struct prde {
|
|
u32 dba;
|
|
u8 fill[2 * 4];
|
|
u32 ddc_and_ext;
|
|
};
|
|
|
|
/*
|
|
* ata_port private data
|
|
* This is our per-port instance data.
|
|
*/
|
|
struct sata_fsl_port_priv {
|
|
struct cmdhdr_tbl_entry *cmdslot;
|
|
dma_addr_t cmdslot_paddr;
|
|
struct command_desc *cmdentry;
|
|
dma_addr_t cmdentry_paddr;
|
|
};
|
|
|
|
/*
|
|
* ata_port->host_set private data
|
|
*/
|
|
struct sata_fsl_host_priv {
|
|
void __iomem *hcr_base;
|
|
void __iomem *ssr_base;
|
|
void __iomem *csr_base;
|
|
int irq;
|
|
int data_snoop;
|
|
struct device_attribute intr_coalescing;
|
|
struct device_attribute rx_watermark;
|
|
};
|
|
|
|
static void fsl_sata_set_irq_coalescing(struct ata_host *host,
|
|
unsigned int count, unsigned int ticks)
|
|
{
|
|
struct sata_fsl_host_priv *host_priv = host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
unsigned long flags;
|
|
|
|
if (count > ICC_MAX_INT_COUNT_THRESHOLD)
|
|
count = ICC_MAX_INT_COUNT_THRESHOLD;
|
|
else if (count < ICC_MIN_INT_COUNT_THRESHOLD)
|
|
count = ICC_MIN_INT_COUNT_THRESHOLD;
|
|
|
|
if (ticks > ICC_MAX_INT_TICKS_THRESHOLD)
|
|
ticks = ICC_MAX_INT_TICKS_THRESHOLD;
|
|
else if ((ICC_MIN_INT_TICKS_THRESHOLD == ticks) &&
|
|
(count > ICC_MIN_INT_COUNT_THRESHOLD))
|
|
ticks = ICC_SAFE_INT_TICKS;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
iowrite32((count << 24 | ticks), hcr_base + ICC);
|
|
|
|
intr_coalescing_count = count;
|
|
intr_coalescing_ticks = ticks;
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
DPRINTK("interrupt coalescing, count = 0x%x, ticks = %x\n",
|
|
intr_coalescing_count, intr_coalescing_ticks);
|
|
DPRINTK("ICC register status: (hcr base: 0x%x) = 0x%x\n",
|
|
hcr_base, ioread32(hcr_base + ICC));
|
|
}
|
|
|
|
static ssize_t fsl_sata_intr_coalescing_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%d %d\n",
|
|
intr_coalescing_count, intr_coalescing_ticks);
|
|
}
|
|
|
|
static ssize_t fsl_sata_intr_coalescing_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
unsigned int coalescing_count, coalescing_ticks;
|
|
|
|
if (sscanf(buf, "%d%d",
|
|
&coalescing_count,
|
|
&coalescing_ticks) != 2) {
|
|
printk(KERN_ERR "fsl-sata: wrong parameter format.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
fsl_sata_set_irq_coalescing(dev_get_drvdata(dev),
|
|
coalescing_count, coalescing_ticks);
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
static ssize_t fsl_sata_rx_watermark_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
unsigned int rx_watermark;
|
|
unsigned long flags;
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct sata_fsl_host_priv *host_priv = host->private_data;
|
|
void __iomem *csr_base = host_priv->csr_base;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
rx_watermark = ioread32(csr_base + TRANSCFG);
|
|
rx_watermark &= 0x1f;
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
return sprintf(buf, "%d\n", rx_watermark);
|
|
}
|
|
|
|
static ssize_t fsl_sata_rx_watermark_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
unsigned int rx_watermark;
|
|
unsigned long flags;
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct sata_fsl_host_priv *host_priv = host->private_data;
|
|
void __iomem *csr_base = host_priv->csr_base;
|
|
u32 temp;
|
|
|
|
if (sscanf(buf, "%d", &rx_watermark) != 1) {
|
|
printk(KERN_ERR "fsl-sata: wrong parameter format.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
temp = ioread32(csr_base + TRANSCFG);
|
|
temp &= 0xffffffe0;
|
|
iowrite32(temp | rx_watermark, csr_base + TRANSCFG);
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
return strlen(buf);
|
|
}
|
|
|
|
static inline unsigned int sata_fsl_tag(unsigned int tag,
|
|
void __iomem *hcr_base)
|
|
{
|
|
/* We let libATA core do actual (queue) tag allocation */
|
|
|
|
/* all non NCQ/queued commands should have tag#0 */
|
|
if (ata_tag_internal(tag)) {
|
|
DPRINTK("mapping internal cmds to tag#0\n");
|
|
return 0;
|
|
}
|
|
|
|
if (unlikely(tag >= SATA_FSL_QUEUE_DEPTH)) {
|
|
DPRINTK("tag %d invalid : out of range\n", tag);
|
|
return 0;
|
|
}
|
|
|
|
if (unlikely((ioread32(hcr_base + CQ)) & (1 << tag))) {
|
|
DPRINTK("tag %d invalid : in use!!\n", tag);
|
|
return 0;
|
|
}
|
|
|
|
return tag;
|
|
}
|
|
|
|
static void sata_fsl_setup_cmd_hdr_entry(struct sata_fsl_port_priv *pp,
|
|
unsigned int tag, u32 desc_info,
|
|
u32 data_xfer_len, u8 num_prde,
|
|
u8 fis_len)
|
|
{
|
|
dma_addr_t cmd_descriptor_address;
|
|
|
|
cmd_descriptor_address = pp->cmdentry_paddr +
|
|
tag * SATA_FSL_CMD_DESC_SIZE;
|
|
|
|
/* NOTE: both data_xfer_len & fis_len are Dword counts */
|
|
|
|
pp->cmdslot[tag].cda = cpu_to_le32(cmd_descriptor_address);
|
|
pp->cmdslot[tag].prde_fis_len =
|
|
cpu_to_le32((num_prde << 16) | (fis_len << 2));
|
|
pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03);
|
|
pp->cmdslot[tag].desc_info = cpu_to_le32(desc_info | (tag & 0x1F));
|
|
|
|
VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n",
|
|
pp->cmdslot[tag].cda,
|
|
pp->cmdslot[tag].prde_fis_len,
|
|
pp->cmdslot[tag].ttl, pp->cmdslot[tag].desc_info);
|
|
|
|
}
|
|
|
|
static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
|
|
u32 *ttl, dma_addr_t cmd_desc_paddr,
|
|
int data_snoop)
|
|
{
|
|
struct scatterlist *sg;
|
|
unsigned int num_prde = 0;
|
|
u32 ttl_dwords = 0;
|
|
|
|
/*
|
|
* NOTE : direct & indirect prdt's are contiguously allocated
|
|
*/
|
|
struct prde *prd = (struct prde *)&((struct command_desc *)
|
|
cmd_desc)->prdt;
|
|
|
|
struct prde *prd_ptr_to_indirect_ext = NULL;
|
|
unsigned indirect_ext_segment_sz = 0;
|
|
dma_addr_t indirect_ext_segment_paddr;
|
|
unsigned int si;
|
|
|
|
VPRINTK("SATA FSL : cd = 0x%p, prd = 0x%p\n", cmd_desc, prd);
|
|
|
|
indirect_ext_segment_paddr = cmd_desc_paddr +
|
|
SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16;
|
|
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
dma_addr_t sg_addr = sg_dma_address(sg);
|
|
u32 sg_len = sg_dma_len(sg);
|
|
|
|
VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n",
|
|
(unsigned long long)sg_addr, sg_len);
|
|
|
|
/* warn if each s/g element is not dword aligned */
|
|
if (unlikely(sg_addr & 0x03))
|
|
ata_port_err(qc->ap, "s/g addr unaligned : 0x%llx\n",
|
|
(unsigned long long)sg_addr);
|
|
if (unlikely(sg_len & 0x03))
|
|
ata_port_err(qc->ap, "s/g len unaligned : 0x%x\n",
|
|
sg_len);
|
|
|
|
if (num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1) &&
|
|
sg_next(sg) != NULL) {
|
|
VPRINTK("setting indirect prde\n");
|
|
prd_ptr_to_indirect_ext = prd;
|
|
prd->dba = cpu_to_le32(indirect_ext_segment_paddr);
|
|
indirect_ext_segment_sz = 0;
|
|
++prd;
|
|
++num_prde;
|
|
}
|
|
|
|
ttl_dwords += sg_len;
|
|
prd->dba = cpu_to_le32(sg_addr);
|
|
prd->ddc_and_ext = cpu_to_le32(data_snoop | (sg_len & ~0x03));
|
|
|
|
VPRINTK("sg_fill, ttl=%d, dba=0x%x, ddc=0x%x\n",
|
|
ttl_dwords, prd->dba, prd->ddc_and_ext);
|
|
|
|
++num_prde;
|
|
++prd;
|
|
if (prd_ptr_to_indirect_ext)
|
|
indirect_ext_segment_sz += sg_len;
|
|
}
|
|
|
|
if (prd_ptr_to_indirect_ext) {
|
|
/* set indirect extension flag along with indirect ext. size */
|
|
prd_ptr_to_indirect_ext->ddc_and_ext =
|
|
cpu_to_le32((EXT_INDIRECT_SEG_PRD_FLAG |
|
|
data_snoop |
|
|
(indirect_ext_segment_sz & ~0x03)));
|
|
}
|
|
|
|
*ttl = ttl_dwords;
|
|
return num_prde;
|
|
}
|
|
|
|
static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct sata_fsl_port_priv *pp = ap->private_data;
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
|
|
struct command_desc *cd;
|
|
u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE;
|
|
u32 num_prde = 0;
|
|
u32 ttl_dwords = 0;
|
|
dma_addr_t cd_paddr;
|
|
|
|
cd = (struct command_desc *)pp->cmdentry + tag;
|
|
cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
|
|
|
|
ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis);
|
|
|
|
VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
|
|
cd->cfis[0], cd->cfis[1], cd->cfis[2]);
|
|
|
|
if (qc->tf.protocol == ATA_PROT_NCQ) {
|
|
VPRINTK("FPDMA xfer,Sctor cnt[0:7],[8:15] = %d,%d\n",
|
|
cd->cfis[3], cd->cfis[11]);
|
|
}
|
|
|
|
/* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */
|
|
if (ata_is_atapi(qc->tf.protocol)) {
|
|
desc_info |= ATAPI_CMD;
|
|
memset((void *)&cd->acmd, 0, 32);
|
|
memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len);
|
|
}
|
|
|
|
if (qc->flags & ATA_QCFLAG_DMAMAP)
|
|
num_prde = sata_fsl_fill_sg(qc, (void *)cd,
|
|
&ttl_dwords, cd_paddr,
|
|
host_priv->data_snoop);
|
|
|
|
if (qc->tf.protocol == ATA_PROT_NCQ)
|
|
desc_info |= FPDMA_QUEUED_CMD;
|
|
|
|
sata_fsl_setup_cmd_hdr_entry(pp, tag, desc_info, ttl_dwords,
|
|
num_prde, 5);
|
|
|
|
VPRINTK("SATA FSL : xx_qc_prep, di = 0x%x, ttl = %d, num_prde = %d\n",
|
|
desc_info, ttl_dwords, num_prde);
|
|
}
|
|
|
|
static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
|
|
|
|
VPRINTK("xx_qc_issue called,CQ=0x%x,CA=0x%x,CE=0x%x,CC=0x%x\n",
|
|
ioread32(CQ + hcr_base),
|
|
ioread32(CA + hcr_base),
|
|
ioread32(CE + hcr_base), ioread32(CC + hcr_base));
|
|
|
|
iowrite32(qc->dev->link->pmp, CQPMP + hcr_base);
|
|
|
|
/* Simply queue command to the controller/device */
|
|
iowrite32(1 << tag, CQ + hcr_base);
|
|
|
|
VPRINTK("xx_qc_issue called, tag=%d, CQ=0x%x, CA=0x%x\n",
|
|
tag, ioread32(CQ + hcr_base), ioread32(CA + hcr_base));
|
|
|
|
VPRINTK("CE=0x%x, DE=0x%x, CC=0x%x, CmdStat = 0x%x\n",
|
|
ioread32(CE + hcr_base),
|
|
ioread32(DE + hcr_base),
|
|
ioread32(CC + hcr_base),
|
|
ioread32(COMMANDSTAT + host_priv->csr_base));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool sata_fsl_qc_fill_rtf(struct ata_queued_cmd *qc)
|
|
{
|
|
struct sata_fsl_port_priv *pp = qc->ap->private_data;
|
|
struct sata_fsl_host_priv *host_priv = qc->ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
|
|
struct command_desc *cd;
|
|
|
|
cd = pp->cmdentry + tag;
|
|
|
|
ata_tf_from_fis(cd->sfis, &qc->result_tf);
|
|
return true;
|
|
}
|
|
|
|
static int sata_fsl_scr_write(struct ata_link *link,
|
|
unsigned int sc_reg_in, u32 val)
|
|
{
|
|
struct sata_fsl_host_priv *host_priv = link->ap->host->private_data;
|
|
void __iomem *ssr_base = host_priv->ssr_base;
|
|
unsigned int sc_reg;
|
|
|
|
switch (sc_reg_in) {
|
|
case SCR_STATUS:
|
|
case SCR_ERROR:
|
|
case SCR_CONTROL:
|
|
case SCR_ACTIVE:
|
|
sc_reg = sc_reg_in;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg);
|
|
|
|
iowrite32(val, ssr_base + (sc_reg * 4));
|
|
return 0;
|
|
}
|
|
|
|
static int sata_fsl_scr_read(struct ata_link *link,
|
|
unsigned int sc_reg_in, u32 *val)
|
|
{
|
|
struct sata_fsl_host_priv *host_priv = link->ap->host->private_data;
|
|
void __iomem *ssr_base = host_priv->ssr_base;
|
|
unsigned int sc_reg;
|
|
|
|
switch (sc_reg_in) {
|
|
case SCR_STATUS:
|
|
case SCR_ERROR:
|
|
case SCR_CONTROL:
|
|
case SCR_ACTIVE:
|
|
sc_reg = sc_reg_in;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg);
|
|
|
|
*val = ioread32(ssr_base + (sc_reg * 4));
|
|
return 0;
|
|
}
|
|
|
|
static void sata_fsl_freeze(struct ata_port *ap)
|
|
{
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
u32 temp;
|
|
|
|
VPRINTK("xx_freeze, CQ=0x%x, CA=0x%x, CE=0x%x, DE=0x%x\n",
|
|
ioread32(CQ + hcr_base),
|
|
ioread32(CA + hcr_base),
|
|
ioread32(CE + hcr_base), ioread32(DE + hcr_base));
|
|
VPRINTK("CmdStat = 0x%x\n",
|
|
ioread32(host_priv->csr_base + COMMANDSTAT));
|
|
|
|
/* disable interrupts on the controller/port */
|
|
temp = ioread32(hcr_base + HCONTROL);
|
|
iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
|
|
|
|
VPRINTK("in xx_freeze : HControl = 0x%x, HStatus = 0x%x\n",
|
|
ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
|
|
}
|
|
|
|
static void sata_fsl_thaw(struct ata_port *ap)
|
|
{
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
u32 temp;
|
|
|
|
/* ack. any pending IRQs for this controller/port */
|
|
temp = ioread32(hcr_base + HSTATUS);
|
|
|
|
VPRINTK("xx_thaw, pending IRQs = 0x%x\n", (temp & 0x3F));
|
|
|
|
if (temp & 0x3F)
|
|
iowrite32((temp & 0x3F), hcr_base + HSTATUS);
|
|
|
|
/* enable interrupts on the controller/port */
|
|
temp = ioread32(hcr_base + HCONTROL);
|
|
iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
|
|
|
|
VPRINTK("xx_thaw : HControl = 0x%x, HStatus = 0x%x\n",
|
|
ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
|
|
}
|
|
|
|
static void sata_fsl_pmp_attach(struct ata_port *ap)
|
|
{
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
u32 temp;
|
|
|
|
temp = ioread32(hcr_base + HCONTROL);
|
|
iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL);
|
|
}
|
|
|
|
static void sata_fsl_pmp_detach(struct ata_port *ap)
|
|
{
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
u32 temp;
|
|
|
|
temp = ioread32(hcr_base + HCONTROL);
|
|
temp &= ~HCONTROL_PMP_ATTACHED;
|
|
iowrite32(temp, hcr_base + HCONTROL);
|
|
|
|
/* enable interrupts on the controller/port */
|
|
temp = ioread32(hcr_base + HCONTROL);
|
|
iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
|
|
|
|
}
|
|
|
|
static int sata_fsl_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct sata_fsl_port_priv *pp;
|
|
void *mem;
|
|
dma_addr_t mem_dma;
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
u32 temp;
|
|
|
|
pp = kzalloc(sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
|
|
mem = dma_zalloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma,
|
|
GFP_KERNEL);
|
|
if (!mem) {
|
|
kfree(pp);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pp->cmdslot = mem;
|
|
pp->cmdslot_paddr = mem_dma;
|
|
|
|
mem += SATA_FSL_CMD_SLOT_SIZE;
|
|
mem_dma += SATA_FSL_CMD_SLOT_SIZE;
|
|
|
|
pp->cmdentry = mem;
|
|
pp->cmdentry_paddr = mem_dma;
|
|
|
|
ap->private_data = pp;
|
|
|
|
VPRINTK("CHBA = 0x%x, cmdentry_phys = 0x%x\n",
|
|
pp->cmdslot_paddr, pp->cmdentry_paddr);
|
|
|
|
/* Now, update the CHBA register in host controller cmd register set */
|
|
iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
|
|
|
|
/*
|
|
* Now, we can bring the controller on-line & also initiate
|
|
* the COMINIT sequence, we simply return here and the boot-probing
|
|
* & device discovery process is re-initiated by libATA using a
|
|
* Softreset EH (dummy) session. Hence, boot probing and device
|
|
* discovey will be part of sata_fsl_softreset() callback.
|
|
*/
|
|
|
|
temp = ioread32(hcr_base + HCONTROL);
|
|
iowrite32((temp | HCONTROL_ONLINE_PHY_RST), hcr_base + HCONTROL);
|
|
|
|
VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
|
|
VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
|
|
VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sata_fsl_port_stop(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct sata_fsl_port_priv *pp = ap->private_data;
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
u32 temp;
|
|
|
|
/*
|
|
* Force host controller to go off-line, aborting current operations
|
|
*/
|
|
temp = ioread32(hcr_base + HCONTROL);
|
|
temp &= ~HCONTROL_ONLINE_PHY_RST;
|
|
temp |= HCONTROL_FORCE_OFFLINE;
|
|
iowrite32(temp, hcr_base + HCONTROL);
|
|
|
|
/* Poll for controller to go offline - should happen immediately */
|
|
ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1);
|
|
|
|
ap->private_data = NULL;
|
|
dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ,
|
|
pp->cmdslot, pp->cmdslot_paddr);
|
|
|
|
kfree(pp);
|
|
}
|
|
|
|
static unsigned int sata_fsl_dev_classify(struct ata_port *ap)
|
|
{
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
struct ata_taskfile tf;
|
|
u32 temp;
|
|
|
|
temp = ioread32(hcr_base + SIGNATURE);
|
|
|
|
VPRINTK("raw sig = 0x%x\n", temp);
|
|
VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
|
|
VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
|
|
|
|
tf.lbah = (temp >> 24) & 0xff;
|
|
tf.lbam = (temp >> 16) & 0xff;
|
|
tf.lbal = (temp >> 8) & 0xff;
|
|
tf.nsect = temp & 0xff;
|
|
|
|
return ata_dev_classify(&tf);
|
|
}
|
|
|
|
static int sata_fsl_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
u32 temp;
|
|
int i = 0;
|
|
unsigned long start_jiffies;
|
|
|
|
DPRINTK("in xx_hardreset\n");
|
|
|
|
try_offline_again:
|
|
/*
|
|
* Force host controller to go off-line, aborting current operations
|
|
*/
|
|
temp = ioread32(hcr_base + HCONTROL);
|
|
temp &= ~HCONTROL_ONLINE_PHY_RST;
|
|
iowrite32(temp, hcr_base + HCONTROL);
|
|
|
|
/* Poll for controller to go offline */
|
|
temp = ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, ONLINE,
|
|
1, 500);
|
|
|
|
if (temp & ONLINE) {
|
|
ata_port_err(ap, "Hardreset failed, not off-lined %d\n", i);
|
|
|
|
/*
|
|
* Try to offline controller atleast twice
|
|
*/
|
|
i++;
|
|
if (i == 2)
|
|
goto err;
|
|
else
|
|
goto try_offline_again;
|
|
}
|
|
|
|
DPRINTK("hardreset, controller off-lined\n");
|
|
VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
|
|
VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
|
|
|
|
/*
|
|
* PHY reset should remain asserted for atleast 1ms
|
|
*/
|
|
ata_msleep(ap, 1);
|
|
|
|
sata_set_spd(link);
|
|
|
|
/*
|
|
* Now, bring the host controller online again, this can take time
|
|
* as PHY reset and communication establishment, 1st D2H FIS and
|
|
* device signature update is done, on safe side assume 500ms
|
|
* NOTE : Host online status may be indicated immediately!!
|
|
*/
|
|
|
|
temp = ioread32(hcr_base + HCONTROL);
|
|
temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE);
|
|
temp |= HCONTROL_PMP_ATTACHED;
|
|
iowrite32(temp, hcr_base + HCONTROL);
|
|
|
|
temp = ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, 0, 1, 500);
|
|
|
|
if (!(temp & ONLINE)) {
|
|
ata_port_err(ap, "Hardreset failed, not on-lined\n");
|
|
goto err;
|
|
}
|
|
|
|
DPRINTK("hardreset, controller off-lined & on-lined\n");
|
|
VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
|
|
VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
|
|
|
|
/*
|
|
* First, wait for the PHYRDY change to occur before waiting for
|
|
* the signature, and also verify if SStatus indicates device
|
|
* presence
|
|
*/
|
|
|
|
temp = ata_wait_register(ap, hcr_base + HSTATUS, 0xFF, 0, 1, 500);
|
|
if ((!(temp & 0x10)) || ata_link_offline(link)) {
|
|
ata_port_warn(ap, "No Device OR PHYRDY change,Hstatus = 0x%x\n",
|
|
ioread32(hcr_base + HSTATUS));
|
|
*class = ATA_DEV_NONE;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Wait for the first D2H from device,i.e,signature update notification
|
|
*/
|
|
start_jiffies = jiffies;
|
|
temp = ata_wait_register(ap, hcr_base + HSTATUS, 0xFF, 0x10,
|
|
500, jiffies_to_msecs(deadline - start_jiffies));
|
|
|
|
if ((temp & 0xFF) != 0x18) {
|
|
ata_port_warn(ap, "No Signature Update\n");
|
|
*class = ATA_DEV_NONE;
|
|
goto do_followup_srst;
|
|
} else {
|
|
ata_port_info(ap, "Signature Update detected @ %d msecs\n",
|
|
jiffies_to_msecs(jiffies - start_jiffies));
|
|
*class = sata_fsl_dev_classify(ap);
|
|
return 0;
|
|
}
|
|
|
|
do_followup_srst:
|
|
/*
|
|
* request libATA to perform follow-up softreset
|
|
*/
|
|
return -EAGAIN;
|
|
|
|
err:
|
|
return -EIO;
|
|
}
|
|
|
|
static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct sata_fsl_port_priv *pp = ap->private_data;
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
int pmp = sata_srst_pmp(link);
|
|
u32 temp;
|
|
struct ata_taskfile tf;
|
|
u8 *cfis;
|
|
u32 Serror;
|
|
|
|
DPRINTK("in xx_softreset\n");
|
|
|
|
if (ata_link_offline(link)) {
|
|
DPRINTK("PHY reports no device\n");
|
|
*class = ATA_DEV_NONE;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Send a device reset (SRST) explicitly on command slot #0
|
|
* Check : will the command queue (reg) be cleared during offlining ??
|
|
* Also we will be online only if Phy commn. has been established
|
|
* and device presence has been detected, therefore if we have
|
|
* reached here, we can send a command to the target device
|
|
*/
|
|
|
|
DPRINTK("Sending SRST/device reset\n");
|
|
|
|
ata_tf_init(link->device, &tf);
|
|
cfis = (u8 *) &pp->cmdentry->cfis;
|
|
|
|
/* device reset/SRST is a control register update FIS, uses tag0 */
|
|
sata_fsl_setup_cmd_hdr_entry(pp, 0,
|
|
SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
|
|
|
|
tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
|
|
ata_tf_to_fis(&tf, pmp, 0, cfis);
|
|
|
|
DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n",
|
|
cfis[0], cfis[1], cfis[2], cfis[3]);
|
|
|
|
/*
|
|
* Queue SRST command to the controller/device, ensure that no
|
|
* other commands are active on the controller/device
|
|
*/
|
|
|
|
DPRINTK("@Softreset, CQ = 0x%x, CA = 0x%x, CC = 0x%x\n",
|
|
ioread32(CQ + hcr_base),
|
|
ioread32(CA + hcr_base), ioread32(CC + hcr_base));
|
|
|
|
iowrite32(0xFFFF, CC + hcr_base);
|
|
if (pmp != SATA_PMP_CTRL_PORT)
|
|
iowrite32(pmp, CQPMP + hcr_base);
|
|
iowrite32(1, CQ + hcr_base);
|
|
|
|
temp = ata_wait_register(ap, CQ + hcr_base, 0x1, 0x1, 1, 5000);
|
|
if (temp & 0x1) {
|
|
ata_port_warn(ap, "ATA_SRST issue failed\n");
|
|
|
|
DPRINTK("Softreset@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
|
|
ioread32(CQ + hcr_base),
|
|
ioread32(CA + hcr_base), ioread32(CC + hcr_base));
|
|
|
|
sata_fsl_scr_read(&ap->link, SCR_ERROR, &Serror);
|
|
|
|
DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
|
|
DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
|
|
DPRINTK("Serror = 0x%x\n", Serror);
|
|
goto err;
|
|
}
|
|
|
|
ata_msleep(ap, 1);
|
|
|
|
/*
|
|
* SATA device enters reset state after receiving a Control register
|
|
* FIS with SRST bit asserted and it awaits another H2D Control reg.
|
|
* FIS with SRST bit cleared, then the device does internal diags &
|
|
* initialization, followed by indicating it's initialization status
|
|
* using ATA signature D2H register FIS to the host controller.
|
|
*/
|
|
|
|
sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE,
|
|
0, 0, 5);
|
|
|
|
tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
|
|
ata_tf_to_fis(&tf, pmp, 0, cfis);
|
|
|
|
if (pmp != SATA_PMP_CTRL_PORT)
|
|
iowrite32(pmp, CQPMP + hcr_base);
|
|
iowrite32(1, CQ + hcr_base);
|
|
ata_msleep(ap, 150); /* ?? */
|
|
|
|
/*
|
|
* The above command would have signalled an interrupt on command
|
|
* complete, which needs special handling, by clearing the Nth
|
|
* command bit of the CCreg
|
|
*/
|
|
iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
|
|
|
|
DPRINTK("SATA FSL : Now checking device signature\n");
|
|
|
|
*class = ATA_DEV_NONE;
|
|
|
|
/* Verify if SStatus indicates device presence */
|
|
if (ata_link_online(link)) {
|
|
/*
|
|
* if we are here, device presence has been detected,
|
|
* 1st D2H FIS would have been received, but sfis in
|
|
* command desc. is not updated, but signature register
|
|
* would have been updated
|
|
*/
|
|
|
|
*class = sata_fsl_dev_classify(ap);
|
|
|
|
DPRINTK("class = %d\n", *class);
|
|
VPRINTK("ccreg = 0x%x\n", ioread32(hcr_base + CC));
|
|
VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
return -EIO;
|
|
}
|
|
|
|
static void sata_fsl_error_handler(struct ata_port *ap)
|
|
{
|
|
|
|
DPRINTK("in xx_error_handler\n");
|
|
sata_pmp_error_handler(ap);
|
|
|
|
}
|
|
|
|
static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
if (qc->flags & ATA_QCFLAG_FAILED)
|
|
qc->err_mask |= AC_ERR_OTHER;
|
|
|
|
if (qc->err_mask) {
|
|
/* make DMA engine forget about the failed command */
|
|
|
|
}
|
|
}
|
|
|
|
static void sata_fsl_error_intr(struct ata_port *ap)
|
|
{
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
u32 hstatus, dereg=0, cereg = 0, SError = 0;
|
|
unsigned int err_mask = 0, action = 0;
|
|
int freeze = 0, abort=0;
|
|
struct ata_link *link = NULL;
|
|
struct ata_queued_cmd *qc = NULL;
|
|
struct ata_eh_info *ehi;
|
|
|
|
hstatus = ioread32(hcr_base + HSTATUS);
|
|
cereg = ioread32(hcr_base + CE);
|
|
|
|
/* first, analyze and record host port events */
|
|
link = &ap->link;
|
|
ehi = &link->eh_info;
|
|
ata_ehi_clear_desc(ehi);
|
|
|
|
/*
|
|
* Handle & Clear SError
|
|
*/
|
|
|
|
sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
|
|
if (unlikely(SError & 0xFFFF0000))
|
|
sata_fsl_scr_write(&ap->link, SCR_ERROR, SError);
|
|
|
|
DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
|
|
hstatus, cereg, ioread32(hcr_base + DE), SError);
|
|
|
|
/* handle fatal errors */
|
|
if (hstatus & FATAL_ERROR_DECODE) {
|
|
ehi->err_mask |= AC_ERR_ATA_BUS;
|
|
ehi->action |= ATA_EH_SOFTRESET;
|
|
|
|
freeze = 1;
|
|
}
|
|
|
|
/* Handle SDB FIS receive & notify update */
|
|
if (hstatus & INT_ON_SNOTIFY_UPDATE)
|
|
sata_async_notification(ap);
|
|
|
|
/* Handle PHYRDY change notification */
|
|
if (hstatus & INT_ON_PHYRDY_CHG) {
|
|
DPRINTK("SATA FSL: PHYRDY change indication\n");
|
|
|
|
/* Setup a soft-reset EH action */
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_ehi_push_desc(ehi, "%s", "PHY RDY changed");
|
|
freeze = 1;
|
|
}
|
|
|
|
/* handle single device errors */
|
|
if (cereg) {
|
|
/*
|
|
* clear the command error, also clears queue to the device
|
|
* in error, and we can (re)issue commands to this device.
|
|
* When a device is in error all commands queued into the
|
|
* host controller and at the device are considered aborted
|
|
* and the queue for that device is stopped. Now, after
|
|
* clearing the device error, we can issue commands to the
|
|
* device to interrogate it to find the source of the error.
|
|
*/
|
|
abort = 1;
|
|
|
|
DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
|
|
ioread32(hcr_base + CE), ioread32(hcr_base + DE));
|
|
|
|
/* find out the offending link and qc */
|
|
if (ap->nr_pmp_links) {
|
|
unsigned int dev_num;
|
|
|
|
dereg = ioread32(hcr_base + DE);
|
|
iowrite32(dereg, hcr_base + DE);
|
|
iowrite32(cereg, hcr_base + CE);
|
|
|
|
dev_num = ffs(dereg) - 1;
|
|
if (dev_num < ap->nr_pmp_links && dereg != 0) {
|
|
link = &ap->pmp_link[dev_num];
|
|
ehi = &link->eh_info;
|
|
qc = ata_qc_from_tag(ap, link->active_tag);
|
|
/*
|
|
* We should consider this as non fatal error,
|
|
* and TF must be updated as done below.
|
|
*/
|
|
|
|
err_mask |= AC_ERR_DEV;
|
|
|
|
} else {
|
|
err_mask |= AC_ERR_HSM;
|
|
action |= ATA_EH_HARDRESET;
|
|
freeze = 1;
|
|
}
|
|
} else {
|
|
dereg = ioread32(hcr_base + DE);
|
|
iowrite32(dereg, hcr_base + DE);
|
|
iowrite32(cereg, hcr_base + CE);
|
|
|
|
qc = ata_qc_from_tag(ap, link->active_tag);
|
|
/*
|
|
* We should consider this as non fatal error,
|
|
* and TF must be updated as done below.
|
|
*/
|
|
err_mask |= AC_ERR_DEV;
|
|
}
|
|
}
|
|
|
|
/* record error info */
|
|
if (qc)
|
|
qc->err_mask |= err_mask;
|
|
else
|
|
ehi->err_mask |= err_mask;
|
|
|
|
ehi->action |= action;
|
|
|
|
/* freeze or abort */
|
|
if (freeze)
|
|
ata_port_freeze(ap);
|
|
else if (abort) {
|
|
if (qc)
|
|
ata_link_abort(qc->dev->link);
|
|
else
|
|
ata_port_abort(ap);
|
|
}
|
|
}
|
|
|
|
static void sata_fsl_host_intr(struct ata_port *ap)
|
|
{
|
|
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
u32 hstatus, done_mask = 0;
|
|
struct ata_queued_cmd *qc;
|
|
u32 SError;
|
|
u32 tag;
|
|
u32 status_mask = INT_ON_ERROR;
|
|
|
|
hstatus = ioread32(hcr_base + HSTATUS);
|
|
|
|
sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
|
|
|
|
/* Read command completed register */
|
|
done_mask = ioread32(hcr_base + CC);
|
|
|
|
/* Workaround for data length mismatch errata */
|
|
if (unlikely(hstatus & INT_ON_DATA_LENGTH_MISMATCH)) {
|
|
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
|
|
qc = ata_qc_from_tag(ap, tag);
|
|
if (qc && ata_is_atapi(qc->tf.protocol)) {
|
|
u32 hcontrol;
|
|
/* Set HControl[27] to clear error registers */
|
|
hcontrol = ioread32(hcr_base + HCONTROL);
|
|
iowrite32(hcontrol | CLEAR_ERROR,
|
|
hcr_base + HCONTROL);
|
|
|
|
/* Clear HControl[27] */
|
|
iowrite32(hcontrol & ~CLEAR_ERROR,
|
|
hcr_base + HCONTROL);
|
|
|
|
/* Clear SError[E] bit */
|
|
sata_fsl_scr_write(&ap->link, SCR_ERROR,
|
|
SError);
|
|
|
|
/* Ignore fatal error and device error */
|
|
status_mask &= ~(INT_ON_SINGL_DEVICE_ERR
|
|
| INT_ON_FATAL_ERR);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (unlikely(SError & 0xFFFF0000)) {
|
|
DPRINTK("serror @host_intr : 0x%x\n", SError);
|
|
sata_fsl_error_intr(ap);
|
|
}
|
|
|
|
if (unlikely(hstatus & status_mask)) {
|
|
DPRINTK("error interrupt!!\n");
|
|
sata_fsl_error_intr(ap);
|
|
return;
|
|
}
|
|
|
|
VPRINTK("Status of all queues :\n");
|
|
VPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
|
|
done_mask,
|
|
ioread32(hcr_base + CA),
|
|
ioread32(hcr_base + CE),
|
|
ioread32(hcr_base + CQ),
|
|
ap->qc_active);
|
|
|
|
if (done_mask & ap->qc_active) {
|
|
int i;
|
|
/* clear CC bit, this will also complete the interrupt */
|
|
iowrite32(done_mask, hcr_base + CC);
|
|
|
|
DPRINTK("Status of all queues :\n");
|
|
DPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x\n",
|
|
done_mask, ioread32(hcr_base + CA),
|
|
ioread32(hcr_base + CE));
|
|
|
|
for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
|
|
if (done_mask & (1 << i))
|
|
DPRINTK
|
|
("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
|
|
i, ioread32(hcr_base + CC),
|
|
ioread32(hcr_base + CA));
|
|
}
|
|
ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask);
|
|
return;
|
|
|
|
} else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) {
|
|
iowrite32(1, hcr_base + CC);
|
|
qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
|
|
|
|
DPRINTK("completing non-ncq cmd, CC=0x%x\n",
|
|
ioread32(hcr_base + CC));
|
|
|
|
if (qc) {
|
|
ata_qc_complete(qc);
|
|
}
|
|
} else {
|
|
/* Spurious Interrupt!! */
|
|
DPRINTK("spurious interrupt!!, CC = 0x%x\n",
|
|
ioread32(hcr_base + CC));
|
|
iowrite32(done_mask, hcr_base + CC);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t sata_fsl_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
struct sata_fsl_host_priv *host_priv = host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
u32 interrupt_enables;
|
|
unsigned handled = 0;
|
|
struct ata_port *ap;
|
|
|
|
/* ack. any pending IRQs for this controller/port */
|
|
interrupt_enables = ioread32(hcr_base + HSTATUS);
|
|
interrupt_enables &= 0x3F;
|
|
|
|
DPRINTK("interrupt status 0x%x\n", interrupt_enables);
|
|
|
|
if (!interrupt_enables)
|
|
return IRQ_NONE;
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
/* Assuming one port per host controller */
|
|
|
|
ap = host->ports[0];
|
|
if (ap) {
|
|
sata_fsl_host_intr(ap);
|
|
} else {
|
|
dev_warn(host->dev, "interrupt on disabled port 0\n");
|
|
}
|
|
|
|
iowrite32(interrupt_enables, hcr_base + HSTATUS);
|
|
handled = 1;
|
|
|
|
spin_unlock(&host->lock);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/*
|
|
* Multiple ports are represented by multiple SATA controllers with
|
|
* one port per controller
|
|
*/
|
|
static int sata_fsl_init_controller(struct ata_host *host)
|
|
{
|
|
struct sata_fsl_host_priv *host_priv = host->private_data;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
u32 temp;
|
|
|
|
/*
|
|
* NOTE : We cannot bring the controller online before setting
|
|
* the CHBA, hence main controller initialization is done as
|
|
* part of the port_start() callback
|
|
*/
|
|
|
|
/* sata controller to operate in enterprise mode */
|
|
temp = ioread32(hcr_base + HCONTROL);
|
|
iowrite32(temp & ~HCONTROL_LEGACY, hcr_base + HCONTROL);
|
|
|
|
/* ack. any pending IRQs for this controller/port */
|
|
temp = ioread32(hcr_base + HSTATUS);
|
|
if (temp & 0x3F)
|
|
iowrite32((temp & 0x3F), hcr_base + HSTATUS);
|
|
|
|
/* Keep interrupts disabled on the controller */
|
|
temp = ioread32(hcr_base + HCONTROL);
|
|
iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
|
|
|
|
/* Disable interrupt coalescing control(icc), for the moment */
|
|
DPRINTK("icc = 0x%x\n", ioread32(hcr_base + ICC));
|
|
iowrite32(0x01000000, hcr_base + ICC);
|
|
|
|
/* clear error registers, SError is cleared by libATA */
|
|
iowrite32(0x00000FFFF, hcr_base + CE);
|
|
iowrite32(0x00000FFFF, hcr_base + DE);
|
|
|
|
/*
|
|
* reset the number of command complete bits which will cause the
|
|
* interrupt to be signaled
|
|
*/
|
|
fsl_sata_set_irq_coalescing(host, intr_coalescing_count,
|
|
intr_coalescing_ticks);
|
|
|
|
/*
|
|
* host controller will be brought on-line, during xx_port_start()
|
|
* callback, that should also initiate the OOB, COMINIT sequence
|
|
*/
|
|
|
|
DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
|
|
DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* scsi mid-layer and libata interface structures
|
|
*/
|
|
static struct scsi_host_template sata_fsl_sht = {
|
|
ATA_NCQ_SHT("sata_fsl"),
|
|
.can_queue = SATA_FSL_QUEUE_DEPTH,
|
|
.sg_tablesize = SATA_FSL_MAX_PRD_USABLE,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
};
|
|
|
|
static struct ata_port_operations sata_fsl_ops = {
|
|
.inherits = &sata_pmp_port_ops,
|
|
|
|
.qc_defer = ata_std_qc_defer,
|
|
.qc_prep = sata_fsl_qc_prep,
|
|
.qc_issue = sata_fsl_qc_issue,
|
|
.qc_fill_rtf = sata_fsl_qc_fill_rtf,
|
|
|
|
.scr_read = sata_fsl_scr_read,
|
|
.scr_write = sata_fsl_scr_write,
|
|
|
|
.freeze = sata_fsl_freeze,
|
|
.thaw = sata_fsl_thaw,
|
|
.softreset = sata_fsl_softreset,
|
|
.hardreset = sata_fsl_hardreset,
|
|
.pmp_softreset = sata_fsl_softreset,
|
|
.error_handler = sata_fsl_error_handler,
|
|
.post_internal_cmd = sata_fsl_post_internal_cmd,
|
|
|
|
.port_start = sata_fsl_port_start,
|
|
.port_stop = sata_fsl_port_stop,
|
|
|
|
.pmp_attach = sata_fsl_pmp_attach,
|
|
.pmp_detach = sata_fsl_pmp_detach,
|
|
};
|
|
|
|
static const struct ata_port_info sata_fsl_port_info[] = {
|
|
{
|
|
.flags = SATA_FSL_HOST_FLAGS,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &sata_fsl_ops,
|
|
},
|
|
};
|
|
|
|
static int sata_fsl_probe(struct platform_device *ofdev)
|
|
{
|
|
int retval = -ENXIO;
|
|
void __iomem *hcr_base = NULL;
|
|
void __iomem *ssr_base = NULL;
|
|
void __iomem *csr_base = NULL;
|
|
struct sata_fsl_host_priv *host_priv = NULL;
|
|
int irq;
|
|
struct ata_host *host = NULL;
|
|
u32 temp;
|
|
|
|
struct ata_port_info pi = sata_fsl_port_info[0];
|
|
const struct ata_port_info *ppi[] = { &pi, NULL };
|
|
|
|
dev_info(&ofdev->dev, "Sata FSL Platform/CSB Driver init\n");
|
|
|
|
hcr_base = of_iomap(ofdev->dev.of_node, 0);
|
|
if (!hcr_base)
|
|
goto error_exit_with_cleanup;
|
|
|
|
ssr_base = hcr_base + 0x100;
|
|
csr_base = hcr_base + 0x140;
|
|
|
|
if (!of_device_is_compatible(ofdev->dev.of_node, "fsl,mpc8315-sata")) {
|
|
temp = ioread32(csr_base + TRANSCFG);
|
|
temp = temp & 0xffffffe0;
|
|
iowrite32(temp | TRANSCFG_RX_WATER_MARK, csr_base + TRANSCFG);
|
|
}
|
|
|
|
DPRINTK("@reset i/o = 0x%x\n", ioread32(csr_base + TRANSCFG));
|
|
DPRINTK("sizeof(cmd_desc) = %d\n", sizeof(struct command_desc));
|
|
DPRINTK("sizeof(#define cmd_desc) = %d\n", SATA_FSL_CMD_DESC_SIZE);
|
|
|
|
host_priv = kzalloc(sizeof(struct sata_fsl_host_priv), GFP_KERNEL);
|
|
if (!host_priv)
|
|
goto error_exit_with_cleanup;
|
|
|
|
host_priv->hcr_base = hcr_base;
|
|
host_priv->ssr_base = ssr_base;
|
|
host_priv->csr_base = csr_base;
|
|
|
|
irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
|
|
if (!irq) {
|
|
dev_err(&ofdev->dev, "invalid irq from platform\n");
|
|
goto error_exit_with_cleanup;
|
|
}
|
|
host_priv->irq = irq;
|
|
|
|
if (of_device_is_compatible(ofdev->dev.of_node, "fsl,pq-sata-v2"))
|
|
host_priv->data_snoop = DATA_SNOOP_ENABLE_V2;
|
|
else
|
|
host_priv->data_snoop = DATA_SNOOP_ENABLE_V1;
|
|
|
|
/* allocate host structure */
|
|
host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS);
|
|
if (!host) {
|
|
retval = -ENOMEM;
|
|
goto error_exit_with_cleanup;
|
|
}
|
|
|
|
/* host->iomap is not used currently */
|
|
host->private_data = host_priv;
|
|
|
|
/* initialize host controller */
|
|
sata_fsl_init_controller(host);
|
|
|
|
/*
|
|
* Now, register with libATA core, this will also initiate the
|
|
* device discovery process, invoking our port_start() handler &
|
|
* error_handler() to execute a dummy Softreset EH session
|
|
*/
|
|
ata_host_activate(host, irq, sata_fsl_interrupt, SATA_FSL_IRQ_FLAG,
|
|
&sata_fsl_sht);
|
|
|
|
platform_set_drvdata(ofdev, host);
|
|
|
|
host_priv->intr_coalescing.show = fsl_sata_intr_coalescing_show;
|
|
host_priv->intr_coalescing.store = fsl_sata_intr_coalescing_store;
|
|
sysfs_attr_init(&host_priv->intr_coalescing.attr);
|
|
host_priv->intr_coalescing.attr.name = "intr_coalescing";
|
|
host_priv->intr_coalescing.attr.mode = S_IRUGO | S_IWUSR;
|
|
retval = device_create_file(host->dev, &host_priv->intr_coalescing);
|
|
if (retval)
|
|
goto error_exit_with_cleanup;
|
|
|
|
host_priv->rx_watermark.show = fsl_sata_rx_watermark_show;
|
|
host_priv->rx_watermark.store = fsl_sata_rx_watermark_store;
|
|
sysfs_attr_init(&host_priv->rx_watermark.attr);
|
|
host_priv->rx_watermark.attr.name = "rx_watermark";
|
|
host_priv->rx_watermark.attr.mode = S_IRUGO | S_IWUSR;
|
|
retval = device_create_file(host->dev, &host_priv->rx_watermark);
|
|
if (retval) {
|
|
device_remove_file(&ofdev->dev, &host_priv->intr_coalescing);
|
|
goto error_exit_with_cleanup;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error_exit_with_cleanup:
|
|
|
|
if (host)
|
|
ata_host_detach(host);
|
|
|
|
if (hcr_base)
|
|
iounmap(hcr_base);
|
|
kfree(host_priv);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int sata_fsl_remove(struct platform_device *ofdev)
|
|
{
|
|
struct ata_host *host = platform_get_drvdata(ofdev);
|
|
struct sata_fsl_host_priv *host_priv = host->private_data;
|
|
|
|
device_remove_file(&ofdev->dev, &host_priv->intr_coalescing);
|
|
device_remove_file(&ofdev->dev, &host_priv->rx_watermark);
|
|
|
|
ata_host_detach(host);
|
|
|
|
irq_dispose_mapping(host_priv->irq);
|
|
iounmap(host_priv->hcr_base);
|
|
kfree(host_priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int sata_fsl_suspend(struct platform_device *op, pm_message_t state)
|
|
{
|
|
struct ata_host *host = platform_get_drvdata(op);
|
|
return ata_host_suspend(host, state);
|
|
}
|
|
|
|
static int sata_fsl_resume(struct platform_device *op)
|
|
{
|
|
struct ata_host *host = platform_get_drvdata(op);
|
|
struct sata_fsl_host_priv *host_priv = host->private_data;
|
|
int ret;
|
|
void __iomem *hcr_base = host_priv->hcr_base;
|
|
struct ata_port *ap = host->ports[0];
|
|
struct sata_fsl_port_priv *pp = ap->private_data;
|
|
|
|
ret = sata_fsl_init_controller(host);
|
|
if (ret) {
|
|
dev_err(&op->dev, "Error initializing hardware\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Recovery the CHBA register in host controller cmd register set */
|
|
iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
|
|
|
|
iowrite32((ioread32(hcr_base + HCONTROL)
|
|
| HCONTROL_ONLINE_PHY_RST
|
|
| HCONTROL_SNOOP_ENABLE
|
|
| HCONTROL_PMP_ATTACHED),
|
|
hcr_base + HCONTROL);
|
|
|
|
ata_host_resume(host);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static struct of_device_id fsl_sata_match[] = {
|
|
{
|
|
.compatible = "fsl,pq-sata",
|
|
},
|
|
{
|
|
.compatible = "fsl,pq-sata-v2",
|
|
},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, fsl_sata_match);
|
|
|
|
static struct platform_driver fsl_sata_driver = {
|
|
.driver = {
|
|
.name = "fsl-sata",
|
|
.of_match_table = fsl_sata_match,
|
|
},
|
|
.probe = sata_fsl_probe,
|
|
.remove = sata_fsl_remove,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = sata_fsl_suspend,
|
|
.resume = sata_fsl_resume,
|
|
#endif
|
|
};
|
|
|
|
module_platform_driver(fsl_sata_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Ashish Kalra, Freescale Semiconductor");
|
|
MODULE_DESCRIPTION("Freescale 3.0Gbps SATA controller low level driver");
|
|
MODULE_VERSION("1.10");
|