mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 02:46:49 +07:00
d821a4c4d1
With a low enough MSS on the link partner and TSO enabled locally, the networking stack can periodically send a very large (e.g. 64KB) TCP message for which the driver will attempt to use more Tx descriptors than are available by default in the Tx ring. This is due to a workaround in the code that imposes a limit of only 4 MSS-sized segments per descriptor which appears to be a carry-over from the older e1000 driver and may be applicable only to some older PCI or PCIx parts which are not supported in e1000e. When the driver gets a message that is too large to fit across the configured number of Tx descriptors, it stops the upper stack from queueing any more and gets stuck in this state. After a timeout, the upper stack assumes the adapter is hung and calls the driver to reset it. Remove the unnecessary limitation of using up to only 4 MSS-sized segments per Tx descriptor, and put in a hard failure test to catch when attempting to check for message sizes larger than would fit in the whole Tx ring. Refactor the remaining logic that limits the size of data per Tx descriptor from a seemingly arbitrary 8KB to a limit based on the dynamic size of the Tx packet buffer as described in the hardware specification. Also, fix the logic in the check for space in the Tx ring for the next largest possible packet after the current one has been successfully queued for transmit, and use the appropriate defines for default ring sizes in e1000_probe instead of magic values. This issue goes back to the introduction of e1000e in 2.6.24 when it was split off from e1000. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Stable <stable@vger.kernel.org> [2.6.24+] Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
---|---|---|
.. | ||
e1000 | ||
e1000e | ||
igb | ||
igbvf | ||
ixgb | ||
ixgbe | ||
ixgbevf | ||
e100.c | ||
Kconfig | ||
Makefile |