mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 09:34:51 +07:00
99cc7ad46b
Pull i2c updates from Wolfram Sang: - the core has now a lockless variant of i2c_smbus_xfer. Some open coded versions of this got removed in drivers. This also enables proper SCCB support in regmap. - locking got a more precise naming. i2c_{un}lock_adapter() had to go, and we know use i2c_lock_bus() consistently with flags like I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity. - the gpio fault injector got a new delicate testcase - the bus recovery procedure got fixed to handle the new testcase correctly - a new quirk flag for controllers not able to handle zero length messages together with driver updates to use it - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl family S900 - and a good set of driver improvements and bugfixes * 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: refactor private flags i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support i2c: imx: Simplify stopped state tracking i2c: imx: Fix race condition in dma read i2c: pasemi: remove hardcoded bus numbers on smbus i2c: designware: Add SPDX license tag i2c: designware: Convert to use struct i2c_timings i2c: core: Parse SDA hold time from firmware i2c: designware-pcidrv: Mark expected switch fall-through i2c: amd8111: Mark expected switch fall-through i2c: sh_mobile: use core to detect 'no zero length read' quirk i2c: xlr: use core to detect 'no zero length' quirk i2c: rcar: use core to detect 'no zero length' quirk i2c: stu300: use core to detect 'no zero length' quirk i2c: pmcmsp: use core to detect 'no zero length' quirk i2c: mxs: use core to detect 'no zero length' quirk ...
1590 lines
35 KiB
C
1590 lines
35 KiB
C
/*
|
|
* Afatech AF9013 demodulator driver
|
|
*
|
|
* Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
|
|
* Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
|
|
*
|
|
* Thanks to Afatech who kindly provided information.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include "af9013_priv.h"
|
|
|
|
struct af9013_state {
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
struct i2c_mux_core *muxc;
|
|
struct dvb_frontend fe;
|
|
u32 clk;
|
|
u8 tuner;
|
|
u32 if_frequency;
|
|
u8 ts_mode;
|
|
u8 ts_output_pin;
|
|
bool spec_inv;
|
|
u8 api_version[4];
|
|
u8 gpio[4];
|
|
|
|
u32 bandwidth_hz;
|
|
enum fe_status fe_status;
|
|
/* RF and IF AGC limits used for signal strength calc */
|
|
u8 strength_en, rf_agc_50, rf_agc_80, if_agc_50, if_agc_80;
|
|
unsigned long set_frontend_jiffies;
|
|
unsigned long read_status_jiffies;
|
|
unsigned long strength_jiffies;
|
|
unsigned long cnr_jiffies;
|
|
unsigned long ber_ucb_jiffies;
|
|
u16 dvbv3_snr;
|
|
u16 dvbv3_strength;
|
|
u32 dvbv3_ber;
|
|
u32 dvbv3_ucblocks;
|
|
bool first_tune;
|
|
};
|
|
|
|
static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval)
|
|
{
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
u8 pos;
|
|
u16 addr;
|
|
|
|
dev_dbg(&client->dev, "gpio %u, gpioval %02x\n", gpio, gpioval);
|
|
|
|
/*
|
|
* GPIO0 & GPIO1 0xd735
|
|
* GPIO2 & GPIO3 0xd736
|
|
*/
|
|
|
|
switch (gpio) {
|
|
case 0:
|
|
case 1:
|
|
addr = 0xd735;
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
addr = 0xd736;
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
switch (gpio) {
|
|
case 0:
|
|
case 2:
|
|
pos = 0;
|
|
break;
|
|
case 1:
|
|
case 3:
|
|
default:
|
|
pos = 4;
|
|
break;
|
|
}
|
|
|
|
ret = regmap_update_bits(state->regmap, addr, 0x0f << pos,
|
|
gpioval << pos);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *fesettings)
|
|
{
|
|
fesettings->min_delay_ms = 800;
|
|
fesettings->step_size = 0;
|
|
fesettings->max_drift = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9013_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, i, sampling_freq;
|
|
bool auto_mode, spec_inv;
|
|
u8 buf[6];
|
|
u32 if_frequency, freq_cw;
|
|
|
|
dev_dbg(&client->dev, "frequency %u, bandwidth_hz %u\n",
|
|
c->frequency, c->bandwidth_hz);
|
|
|
|
/* program tuner */
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
ret = fe->ops.tuner_ops.set_params(fe);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* program CFOE coefficients */
|
|
if (c->bandwidth_hz != state->bandwidth_hz) {
|
|
for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) {
|
|
if (coeff_lut[i].clock == state->clk &&
|
|
coeff_lut[i].bandwidth_hz == c->bandwidth_hz) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Return an error if can't find bandwidth or the right clock */
|
|
if (i == ARRAY_SIZE(coeff_lut)) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_bulk_write(state->regmap, 0xae00, coeff_lut[i].val,
|
|
sizeof(coeff_lut[i].val));
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* program frequency control */
|
|
if (c->bandwidth_hz != state->bandwidth_hz || state->first_tune) {
|
|
/* get used IF frequency */
|
|
if (fe->ops.tuner_ops.get_if_frequency) {
|
|
ret = fe->ops.tuner_ops.get_if_frequency(fe,
|
|
&if_frequency);
|
|
if (ret)
|
|
goto err;
|
|
} else {
|
|
if_frequency = state->if_frequency;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "if_frequency %u\n", if_frequency);
|
|
|
|
sampling_freq = if_frequency;
|
|
|
|
while (sampling_freq > (state->clk / 2))
|
|
sampling_freq -= state->clk;
|
|
|
|
if (sampling_freq < 0) {
|
|
sampling_freq *= -1;
|
|
spec_inv = state->spec_inv;
|
|
} else {
|
|
spec_inv = !state->spec_inv;
|
|
}
|
|
|
|
freq_cw = DIV_ROUND_CLOSEST_ULL((u64)sampling_freq * 0x800000,
|
|
state->clk);
|
|
|
|
if (spec_inv)
|
|
freq_cw = 0x800000 - freq_cw;
|
|
|
|
buf[0] = (freq_cw >> 0) & 0xff;
|
|
buf[1] = (freq_cw >> 8) & 0xff;
|
|
buf[2] = (freq_cw >> 16) & 0x7f;
|
|
|
|
freq_cw = 0x800000 - freq_cw;
|
|
|
|
buf[3] = (freq_cw >> 0) & 0xff;
|
|
buf[4] = (freq_cw >> 8) & 0xff;
|
|
buf[5] = (freq_cw >> 16) & 0x7f;
|
|
|
|
ret = regmap_bulk_write(state->regmap, 0xd140, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_bulk_write(state->regmap, 0x9be7, buf, 6);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* clear TPS lock flag */
|
|
ret = regmap_update_bits(state->regmap, 0xd330, 0x08, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* clear MPEG2 lock flag */
|
|
ret = regmap_update_bits(state->regmap, 0xd507, 0x40, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* empty channel function */
|
|
ret = regmap_update_bits(state->regmap, 0x9bfe, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* empty DVB-T channel function */
|
|
ret = regmap_update_bits(state->regmap, 0x9bc2, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* transmission parameters */
|
|
auto_mode = false;
|
|
memset(buf, 0, 3);
|
|
|
|
switch (c->transmission_mode) {
|
|
case TRANSMISSION_MODE_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case TRANSMISSION_MODE_2K:
|
|
break;
|
|
case TRANSMISSION_MODE_8K:
|
|
buf[0] |= (1 << 0);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid transmission_mode\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
switch (c->guard_interval) {
|
|
case GUARD_INTERVAL_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case GUARD_INTERVAL_1_32:
|
|
break;
|
|
case GUARD_INTERVAL_1_16:
|
|
buf[0] |= (1 << 2);
|
|
break;
|
|
case GUARD_INTERVAL_1_8:
|
|
buf[0] |= (2 << 2);
|
|
break;
|
|
case GUARD_INTERVAL_1_4:
|
|
buf[0] |= (3 << 2);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid guard_interval\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
switch (c->hierarchy) {
|
|
case HIERARCHY_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case HIERARCHY_NONE:
|
|
break;
|
|
case HIERARCHY_1:
|
|
buf[0] |= (1 << 4);
|
|
break;
|
|
case HIERARCHY_2:
|
|
buf[0] |= (2 << 4);
|
|
break;
|
|
case HIERARCHY_4:
|
|
buf[0] |= (3 << 4);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid hierarchy\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
switch (c->modulation) {
|
|
case QAM_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case QPSK:
|
|
break;
|
|
case QAM_16:
|
|
buf[1] |= (1 << 6);
|
|
break;
|
|
case QAM_64:
|
|
buf[1] |= (2 << 6);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid modulation\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
/* Use HP. How and which case we can switch to LP? */
|
|
buf[1] |= (1 << 4);
|
|
|
|
switch (c->code_rate_HP) {
|
|
case FEC_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case FEC_1_2:
|
|
break;
|
|
case FEC_2_3:
|
|
buf[2] |= (1 << 0);
|
|
break;
|
|
case FEC_3_4:
|
|
buf[2] |= (2 << 0);
|
|
break;
|
|
case FEC_5_6:
|
|
buf[2] |= (3 << 0);
|
|
break;
|
|
case FEC_7_8:
|
|
buf[2] |= (4 << 0);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid code_rate_HP\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
switch (c->code_rate_LP) {
|
|
case FEC_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case FEC_1_2:
|
|
break;
|
|
case FEC_2_3:
|
|
buf[2] |= (1 << 3);
|
|
break;
|
|
case FEC_3_4:
|
|
buf[2] |= (2 << 3);
|
|
break;
|
|
case FEC_5_6:
|
|
buf[2] |= (3 << 3);
|
|
break;
|
|
case FEC_7_8:
|
|
buf[2] |= (4 << 3);
|
|
break;
|
|
case FEC_NONE:
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid code_rate_LP\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
switch (c->bandwidth_hz) {
|
|
case 6000000:
|
|
break;
|
|
case 7000000:
|
|
buf[1] |= (1 << 2);
|
|
break;
|
|
case 8000000:
|
|
buf[1] |= (2 << 2);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid bandwidth_hz\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_bulk_write(state->regmap, 0xd3c0, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (auto_mode) {
|
|
/* clear easy mode flag */
|
|
ret = regmap_write(state->regmap, 0xaefd, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "auto params\n");
|
|
} else {
|
|
/* set easy mode flag */
|
|
ret = regmap_write(state->regmap, 0xaefd, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(state->regmap, 0xaefe, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "manual params\n");
|
|
}
|
|
|
|
/* Reset FSM */
|
|
ret = regmap_write(state->regmap, 0xffff, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
state->bandwidth_hz = c->bandwidth_hz;
|
|
state->set_frontend_jiffies = jiffies;
|
|
state->first_tune = false;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_get_frontend(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *c)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
u8 buf[3];
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
ret = regmap_bulk_read(state->regmap, 0xd3c0, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch ((buf[1] >> 6) & 3) {
|
|
case 0:
|
|
c->modulation = QPSK;
|
|
break;
|
|
case 1:
|
|
c->modulation = QAM_16;
|
|
break;
|
|
case 2:
|
|
c->modulation = QAM_64;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[0] >> 0) & 3) {
|
|
case 0:
|
|
c->transmission_mode = TRANSMISSION_MODE_2K;
|
|
break;
|
|
case 1:
|
|
c->transmission_mode = TRANSMISSION_MODE_8K;
|
|
}
|
|
|
|
switch ((buf[0] >> 2) & 3) {
|
|
case 0:
|
|
c->guard_interval = GUARD_INTERVAL_1_32;
|
|
break;
|
|
case 1:
|
|
c->guard_interval = GUARD_INTERVAL_1_16;
|
|
break;
|
|
case 2:
|
|
c->guard_interval = GUARD_INTERVAL_1_8;
|
|
break;
|
|
case 3:
|
|
c->guard_interval = GUARD_INTERVAL_1_4;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[0] >> 4) & 7) {
|
|
case 0:
|
|
c->hierarchy = HIERARCHY_NONE;
|
|
break;
|
|
case 1:
|
|
c->hierarchy = HIERARCHY_1;
|
|
break;
|
|
case 2:
|
|
c->hierarchy = HIERARCHY_2;
|
|
break;
|
|
case 3:
|
|
c->hierarchy = HIERARCHY_4;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[2] >> 0) & 7) {
|
|
case 0:
|
|
c->code_rate_HP = FEC_1_2;
|
|
break;
|
|
case 1:
|
|
c->code_rate_HP = FEC_2_3;
|
|
break;
|
|
case 2:
|
|
c->code_rate_HP = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
c->code_rate_HP = FEC_5_6;
|
|
break;
|
|
case 4:
|
|
c->code_rate_HP = FEC_7_8;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[2] >> 3) & 7) {
|
|
case 0:
|
|
c->code_rate_LP = FEC_1_2;
|
|
break;
|
|
case 1:
|
|
c->code_rate_LP = FEC_2_3;
|
|
break;
|
|
case 2:
|
|
c->code_rate_LP = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
c->code_rate_LP = FEC_5_6;
|
|
break;
|
|
case 4:
|
|
c->code_rate_LP = FEC_7_8;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[1] >> 2) & 3) {
|
|
case 0:
|
|
c->bandwidth_hz = 6000000;
|
|
break;
|
|
case 1:
|
|
c->bandwidth_hz = 7000000;
|
|
break;
|
|
case 2:
|
|
c->bandwidth_hz = 8000000;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, stmp1;
|
|
unsigned int utmp, utmp1, utmp2, utmp3, utmp4;
|
|
u8 buf[7];
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/*
|
|
* Return status from the cache if it is younger than 2000ms with the
|
|
* exception of last tune is done during 4000ms.
|
|
*/
|
|
if (time_is_after_jiffies(state->read_status_jiffies + msecs_to_jiffies(2000)) &&
|
|
time_is_before_jiffies(state->set_frontend_jiffies + msecs_to_jiffies(4000))) {
|
|
*status = state->fe_status;
|
|
} else {
|
|
/* MPEG2 lock */
|
|
ret = regmap_read(state->regmap, 0xd507, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp >> 6) & 0x01) {
|
|
utmp1 = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
|
|
} else {
|
|
/* TPS lock */
|
|
ret = regmap_read(state->regmap, 0xd330, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp >> 3) & 0x01)
|
|
utmp1 = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI;
|
|
else
|
|
utmp1 = 0;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "fe_status %02x\n", utmp1);
|
|
|
|
state->read_status_jiffies = jiffies;
|
|
|
|
state->fe_status = utmp1;
|
|
*status = utmp1;
|
|
}
|
|
|
|
/* Signal strength */
|
|
switch (state->strength_en) {
|
|
case 0:
|
|
/* Check if we support signal strength */
|
|
ret = regmap_read(state->regmap, 0x9bee, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp >> 0) & 0x01) {
|
|
/* Read agc values for signal strength estimation */
|
|
ret = regmap_read(state->regmap, 0x9bbd, &utmp1);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_read(state->regmap, 0x9bd0, &utmp2);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_read(state->regmap, 0x9be2, &utmp3);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_read(state->regmap, 0x9be4, &utmp4);
|
|
if (ret)
|
|
goto err;
|
|
|
|
state->rf_agc_50 = utmp1;
|
|
state->rf_agc_80 = utmp2;
|
|
state->if_agc_50 = utmp3;
|
|
state->if_agc_80 = utmp4;
|
|
dev_dbg(&client->dev,
|
|
"rf_agc_50 %u, rf_agc_80 %u, if_agc_50 %u, if_agc_80 %u\n",
|
|
utmp1, utmp2, utmp3, utmp4);
|
|
|
|
state->strength_en = 1;
|
|
} else {
|
|
/* Signal strength is not supported */
|
|
state->strength_en = 2;
|
|
break;
|
|
}
|
|
/* Fall through */
|
|
case 1:
|
|
if (time_is_after_jiffies(state->strength_jiffies + msecs_to_jiffies(2000)))
|
|
break;
|
|
|
|
/* Read value */
|
|
ret = regmap_bulk_read(state->regmap, 0xd07c, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/*
|
|
* Construct line equation from tuner dependent -80/-50 dBm agc
|
|
* limits and use it to map current agc value to dBm estimate
|
|
*/
|
|
#define agc_gain (buf[0] + buf[1])
|
|
#define agc_gain_50dbm (state->rf_agc_50 + state->if_agc_50)
|
|
#define agc_gain_80dbm (state->rf_agc_80 + state->if_agc_80)
|
|
stmp1 = 30000 * (agc_gain - agc_gain_80dbm) /
|
|
(agc_gain_50dbm - agc_gain_80dbm) - 80000;
|
|
|
|
dev_dbg(&client->dev,
|
|
"strength %d, agc_gain %d, agc_gain_50dbm %d, agc_gain_80dbm %d\n",
|
|
stmp1, agc_gain, agc_gain_50dbm, agc_gain_80dbm);
|
|
|
|
state->strength_jiffies = jiffies;
|
|
/* Convert [-90, -30] dBm to [0x0000, 0xffff] for dvbv3 */
|
|
utmp1 = clamp(stmp1 + 90000, 0, 60000);
|
|
state->dvbv3_strength = div_u64((u64)utmp1 * 0xffff, 60000);
|
|
|
|
c->strength.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->strength.stat[0].svalue = stmp1;
|
|
break;
|
|
default:
|
|
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
break;
|
|
}
|
|
|
|
/* CNR */
|
|
switch (state->fe_status & FE_HAS_VITERBI) {
|
|
case FE_HAS_VITERBI:
|
|
if (time_is_after_jiffies(state->cnr_jiffies + msecs_to_jiffies(2000)))
|
|
break;
|
|
|
|
/* Check if cnr ready */
|
|
ret = regmap_read(state->regmap, 0xd2e1, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!((utmp >> 3) & 0x01)) {
|
|
dev_dbg(&client->dev, "cnr not ready\n");
|
|
break;
|
|
}
|
|
|
|
/* Read value */
|
|
ret = regmap_bulk_read(state->regmap, 0xd2e3, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp1 = buf[2] << 16 | buf[1] << 8 | buf[0] << 0;
|
|
|
|
/* Read current modulation */
|
|
ret = regmap_read(state->regmap, 0xd3c1, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch ((utmp >> 6) & 3) {
|
|
case 0:
|
|
/*
|
|
* QPSK
|
|
* CNR[dB] 13 * -log10((1690000 - value) / value) + 2.6
|
|
* value [653799, 1689999], 2.6 / 13 = 3355443
|
|
*/
|
|
utmp1 = clamp(utmp1, 653799U, 1689999U);
|
|
utmp1 = ((u64)(intlog10(utmp1)
|
|
- intlog10(1690000 - utmp1)
|
|
+ 3355443) * 13 * 1000) >> 24;
|
|
break;
|
|
case 1:
|
|
/*
|
|
* QAM-16
|
|
* CNR[dB] 6 * log10((value - 370000) / (828000 - value)) + 15.7
|
|
* value [371105, 827999], 15.7 / 6 = 43900382
|
|
*/
|
|
utmp1 = clamp(utmp1, 371105U, 827999U);
|
|
utmp1 = ((u64)(intlog10(utmp1 - 370000)
|
|
- intlog10(828000 - utmp1)
|
|
+ 43900382) * 6 * 1000) >> 24;
|
|
break;
|
|
case 2:
|
|
/*
|
|
* QAM-64
|
|
* CNR[dB] 8 * log10((value - 193000) / (425000 - value)) + 23.8
|
|
* value [193246, 424999], 23.8 / 8 = 49912218
|
|
*/
|
|
utmp1 = clamp(utmp1, 193246U, 424999U);
|
|
utmp1 = ((u64)(intlog10(utmp1 - 193000)
|
|
- intlog10(425000 - utmp1)
|
|
+ 49912218) * 8 * 1000) >> 24;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid modulation %u\n",
|
|
(utmp >> 6) & 3);
|
|
utmp1 = 0;
|
|
break;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "cnr %u\n", utmp1);
|
|
|
|
state->cnr_jiffies = jiffies;
|
|
state->dvbv3_snr = utmp1 / 100;
|
|
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->cnr.stat[0].svalue = utmp1;
|
|
break;
|
|
default:
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
break;
|
|
}
|
|
|
|
/* BER / PER */
|
|
switch (state->fe_status & FE_HAS_SYNC) {
|
|
case FE_HAS_SYNC:
|
|
if (time_is_after_jiffies(state->ber_ucb_jiffies + msecs_to_jiffies(2000)))
|
|
break;
|
|
|
|
/* Check if ber / ucb is ready */
|
|
ret = regmap_read(state->regmap, 0xd391, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!((utmp >> 4) & 0x01)) {
|
|
dev_dbg(&client->dev, "ber not ready\n");
|
|
break;
|
|
}
|
|
|
|
/* Read value */
|
|
ret = regmap_bulk_read(state->regmap, 0xd385, buf, 7);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp1 = buf[4] << 16 | buf[3] << 8 | buf[2] << 0;
|
|
utmp2 = (buf[1] << 8 | buf[0] << 0) * 204 * 8;
|
|
utmp3 = buf[6] << 8 | buf[5] << 0;
|
|
utmp4 = buf[1] << 8 | buf[0] << 0;
|
|
|
|
/* Use 10000 TS packets for measure */
|
|
if (utmp4 != 10000) {
|
|
buf[0] = (10000 >> 0) & 0xff;
|
|
buf[1] = (10000 >> 8) & 0xff;
|
|
ret = regmap_bulk_write(state->regmap, 0xd385, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* Reset ber / ucb counter */
|
|
ret = regmap_update_bits(state->regmap, 0xd391, 0x20, 0x20);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "post_bit_error %u, post_bit_count %u\n",
|
|
utmp1, utmp2);
|
|
dev_dbg(&client->dev, "block_error %u, block_count %u\n",
|
|
utmp3, utmp4);
|
|
|
|
state->ber_ucb_jiffies = jiffies;
|
|
state->dvbv3_ber = utmp1;
|
|
state->dvbv3_ucblocks += utmp3;
|
|
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_error.stat[0].uvalue += utmp1;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_count.stat[0].uvalue += utmp2;
|
|
|
|
c->block_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->block_error.stat[0].uvalue += utmp3;
|
|
c->block_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->block_count.stat[0].uvalue += utmp4;
|
|
break;
|
|
default:
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
|
|
c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
|
|
*snr = state->dvbv3_snr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
|
|
*strength = state->dvbv3_strength;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
|
|
*ber = state->dvbv3_ber;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
|
|
*ucblocks = state->dvbv3_ucblocks;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9013_init(struct dvb_frontend *fe)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
int ret, i, len;
|
|
unsigned int utmp;
|
|
u8 buf[3];
|
|
const struct af9013_reg_mask_val *tab;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* ADC on */
|
|
ret = regmap_update_bits(state->regmap, 0xd73a, 0x08, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Clear reset */
|
|
ret = regmap_update_bits(state->regmap, 0xd417, 0x02, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Disable reset */
|
|
ret = regmap_update_bits(state->regmap, 0xd417, 0x10, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* write API version to firmware */
|
|
ret = regmap_bulk_write(state->regmap, 0x9bf2, state->api_version, 4);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* program ADC control */
|
|
switch (state->clk) {
|
|
case 28800000: /* 28.800 MHz */
|
|
utmp = 0;
|
|
break;
|
|
case 20480000: /* 20.480 MHz */
|
|
utmp = 1;
|
|
break;
|
|
case 28000000: /* 28.000 MHz */
|
|
utmp = 2;
|
|
break;
|
|
case 25000000: /* 25.000 MHz */
|
|
utmp = 3;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_update_bits(state->regmap, 0x9bd2, 0x0f, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp = div_u64((u64)state->clk * 0x80000, 1000000);
|
|
buf[0] = (utmp >> 0) & 0xff;
|
|
buf[1] = (utmp >> 8) & 0xff;
|
|
buf[2] = (utmp >> 16) & 0xff;
|
|
ret = regmap_bulk_write(state->regmap, 0xd180, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Demod core settings */
|
|
dev_dbg(&client->dev, "load demod core settings\n");
|
|
len = ARRAY_SIZE(demod_init_tab);
|
|
tab = demod_init_tab;
|
|
for (i = 0; i < len; i++) {
|
|
ret = regmap_update_bits(state->regmap, tab[i].reg, tab[i].mask,
|
|
tab[i].val);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* Demod tuner specific settings */
|
|
dev_dbg(&client->dev, "load tuner specific settings\n");
|
|
switch (state->tuner) {
|
|
case AF9013_TUNER_MXL5003D:
|
|
len = ARRAY_SIZE(tuner_init_tab_mxl5003d);
|
|
tab = tuner_init_tab_mxl5003d;
|
|
break;
|
|
case AF9013_TUNER_MXL5005D:
|
|
case AF9013_TUNER_MXL5005R:
|
|
case AF9013_TUNER_MXL5007T:
|
|
len = ARRAY_SIZE(tuner_init_tab_mxl5005);
|
|
tab = tuner_init_tab_mxl5005;
|
|
break;
|
|
case AF9013_TUNER_ENV77H11D5:
|
|
len = ARRAY_SIZE(tuner_init_tab_env77h11d5);
|
|
tab = tuner_init_tab_env77h11d5;
|
|
break;
|
|
case AF9013_TUNER_MT2060:
|
|
len = ARRAY_SIZE(tuner_init_tab_mt2060);
|
|
tab = tuner_init_tab_mt2060;
|
|
break;
|
|
case AF9013_TUNER_MC44S803:
|
|
len = ARRAY_SIZE(tuner_init_tab_mc44s803);
|
|
tab = tuner_init_tab_mc44s803;
|
|
break;
|
|
case AF9013_TUNER_QT1010:
|
|
case AF9013_TUNER_QT1010A:
|
|
len = ARRAY_SIZE(tuner_init_tab_qt1010);
|
|
tab = tuner_init_tab_qt1010;
|
|
break;
|
|
case AF9013_TUNER_MT2060_2:
|
|
len = ARRAY_SIZE(tuner_init_tab_mt2060_2);
|
|
tab = tuner_init_tab_mt2060_2;
|
|
break;
|
|
case AF9013_TUNER_TDA18271:
|
|
case AF9013_TUNER_TDA18218:
|
|
len = ARRAY_SIZE(tuner_init_tab_tda18271);
|
|
tab = tuner_init_tab_tda18271;
|
|
break;
|
|
case AF9013_TUNER_UNKNOWN:
|
|
default:
|
|
len = ARRAY_SIZE(tuner_init_tab_unknown);
|
|
tab = tuner_init_tab_unknown;
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
ret = regmap_update_bits(state->regmap, tab[i].reg, tab[i].mask,
|
|
tab[i].val);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* TS interface */
|
|
if (state->ts_output_pin == 7)
|
|
utmp = 1 << 3 | state->ts_mode << 1;
|
|
else
|
|
utmp = 0 << 3 | state->ts_mode << 1;
|
|
ret = regmap_update_bits(state->regmap, 0xd500, 0x0e, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* enable lock led */
|
|
ret = regmap_update_bits(state->regmap, 0xd730, 0x01, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
state->first_tune = true;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
unsigned int utmp;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* disable lock led */
|
|
ret = regmap_update_bits(state->regmap, 0xd730, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Enable reset */
|
|
ret = regmap_update_bits(state->regmap, 0xd417, 0x10, 0x10);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Start reset execution */
|
|
ret = regmap_write(state->regmap, 0xaeff, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Wait reset performs */
|
|
ret = regmap_read_poll_timeout(state->regmap, 0xd417, utmp,
|
|
(utmp >> 1) & 0x01, 5000, 1000000);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!((utmp >> 1) & 0x01)) {
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
/* ADC off */
|
|
ret = regmap_update_bits(state->regmap, 0xd73a, 0x08, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct dvb_frontend_ops af9013_ops;
|
|
|
|
static int af9013_download_firmware(struct af9013_state *state)
|
|
{
|
|
struct i2c_client *client = state->client;
|
|
int ret, i, len, rem;
|
|
unsigned int utmp;
|
|
u8 buf[4];
|
|
u16 checksum = 0;
|
|
const struct firmware *firmware;
|
|
const char *name = AF9013_FIRMWARE;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* Check whether firmware is already running */
|
|
ret = regmap_read(state->regmap, 0x98be, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "firmware status %02x\n", utmp);
|
|
|
|
if (utmp == 0x0c)
|
|
return 0;
|
|
|
|
dev_info(&client->dev, "found a '%s' in cold state, will try to load a firmware\n",
|
|
af9013_ops.info.name);
|
|
|
|
/* Request the firmware, will block and timeout */
|
|
ret = request_firmware(&firmware, name, &client->dev);
|
|
if (ret) {
|
|
dev_info(&client->dev, "firmware file '%s' not found %d\n",
|
|
name, ret);
|
|
goto err;
|
|
}
|
|
|
|
dev_info(&client->dev, "downloading firmware from file '%s'\n",
|
|
name);
|
|
|
|
/* Write firmware checksum & size */
|
|
for (i = 0; i < firmware->size; i++)
|
|
checksum += firmware->data[i];
|
|
|
|
buf[0] = (checksum >> 8) & 0xff;
|
|
buf[1] = (checksum >> 0) & 0xff;
|
|
buf[2] = (firmware->size >> 8) & 0xff;
|
|
buf[3] = (firmware->size >> 0) & 0xff;
|
|
ret = regmap_bulk_write(state->regmap, 0x50fc, buf, 4);
|
|
if (ret)
|
|
goto err_release_firmware;
|
|
|
|
/* Download firmware */
|
|
#define LEN_MAX 16
|
|
for (rem = firmware->size; rem > 0; rem -= LEN_MAX) {
|
|
len = min(LEN_MAX, rem);
|
|
ret = regmap_bulk_write(state->regmap,
|
|
0x5100 + firmware->size - rem,
|
|
&firmware->data[firmware->size - rem],
|
|
len);
|
|
if (ret) {
|
|
dev_err(&client->dev, "firmware download failed %d\n",
|
|
ret);
|
|
goto err_release_firmware;
|
|
}
|
|
}
|
|
|
|
release_firmware(firmware);
|
|
|
|
/* Boot firmware */
|
|
ret = regmap_write(state->regmap, 0xe205, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Check firmware status. 0c=OK, 04=fail */
|
|
ret = regmap_read_poll_timeout(state->regmap, 0x98be, utmp,
|
|
(utmp == 0x0c || utmp == 0x04),
|
|
5000, 1000000);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "firmware status %02x\n", utmp);
|
|
|
|
if (utmp == 0x04) {
|
|
ret = -ENODEV;
|
|
dev_err(&client->dev, "firmware did not run\n");
|
|
goto err;
|
|
} else if (utmp != 0x0c) {
|
|
ret = -ENODEV;
|
|
dev_err(&client->dev, "firmware boot timeout\n");
|
|
goto err;
|
|
}
|
|
|
|
dev_info(&client->dev, "found a '%s' in warm state\n",
|
|
af9013_ops.info.name);
|
|
|
|
return 0;
|
|
err_release_firmware:
|
|
release_firmware(firmware);
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct dvb_frontend_ops af9013_ops = {
|
|
.delsys = { SYS_DVBT },
|
|
.info = {
|
|
.name = "Afatech AF9013",
|
|
.frequency_min_hz = 174 * MHz,
|
|
.frequency_max_hz = 862 * MHz,
|
|
.frequency_stepsize_hz = 250 * kHz,
|
|
.caps = FE_CAN_FEC_1_2 |
|
|
FE_CAN_FEC_2_3 |
|
|
FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 |
|
|
FE_CAN_FEC_7_8 |
|
|
FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK |
|
|
FE_CAN_QAM_16 |
|
|
FE_CAN_QAM_64 |
|
|
FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_HIERARCHY_AUTO |
|
|
FE_CAN_RECOVER |
|
|
FE_CAN_MUTE_TS
|
|
},
|
|
|
|
.init = af9013_init,
|
|
.sleep = af9013_sleep,
|
|
|
|
.get_tune_settings = af9013_get_tune_settings,
|
|
.set_frontend = af9013_set_frontend,
|
|
.get_frontend = af9013_get_frontend,
|
|
|
|
.read_status = af9013_read_status,
|
|
.read_snr = af9013_read_snr,
|
|
.read_signal_strength = af9013_read_signal_strength,
|
|
.read_ber = af9013_read_ber,
|
|
.read_ucblocks = af9013_read_ucblocks,
|
|
};
|
|
|
|
static int af9013_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "onoff %d\n", onoff);
|
|
|
|
ret = regmap_update_bits(state->regmap, 0xd503, 0x01, onoff);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_pid_filter(struct dvb_frontend *fe, u8 index, u16 pid,
|
|
int onoff)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
u8 buf[2];
|
|
|
|
dev_dbg(&client->dev, "index %d, pid %04x, onoff %d\n",
|
|
index, pid, onoff);
|
|
|
|
if (pid > 0x1fff) {
|
|
/* 0x2000 is kernel virtual pid for whole ts (all pids) */
|
|
ret = 0;
|
|
goto err;
|
|
}
|
|
|
|
buf[0] = (pid >> 0) & 0xff;
|
|
buf[1] = (pid >> 8) & 0xff;
|
|
ret = regmap_bulk_write(state->regmap, 0xd505, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(state->regmap, 0xd504, onoff << 5 | index << 0);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static struct dvb_frontend *af9013_get_dvb_frontend(struct i2c_client *client)
|
|
{
|
|
struct af9013_state *state = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
return &state->fe;
|
|
}
|
|
|
|
static struct i2c_adapter *af9013_get_i2c_adapter(struct i2c_client *client)
|
|
{
|
|
struct af9013_state *state = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
return state->muxc->adapter[0];
|
|
}
|
|
|
|
/*
|
|
* XXX: Hackish solution. We use virtual register, reg bit 16, to carry info
|
|
* about i2c adapter locking. Own locking is needed because i2c mux call has
|
|
* already locked i2c adapter.
|
|
*/
|
|
static int af9013_select(struct i2c_mux_core *muxc, u32 chan)
|
|
{
|
|
struct af9013_state *state = i2c_mux_priv(muxc);
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
if (state->ts_mode == AF9013_TS_MODE_USB)
|
|
ret = regmap_update_bits(state->regmap, 0x1d417, 0x08, 0x08);
|
|
else
|
|
ret = regmap_update_bits(state->regmap, 0x1d607, 0x04, 0x04);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_deselect(struct i2c_mux_core *muxc, u32 chan)
|
|
{
|
|
struct af9013_state *state = i2c_mux_priv(muxc);
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
if (state->ts_mode == AF9013_TS_MODE_USB)
|
|
ret = regmap_update_bits(state->regmap, 0x1d417, 0x08, 0x00);
|
|
else
|
|
ret = regmap_update_bits(state->regmap, 0x1d607, 0x04, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Own I2C access routines needed for regmap as chip uses extra command byte */
|
|
static int af9013_wregs(struct i2c_client *client, u8 cmd, u16 reg,
|
|
const u8 *val, int len, u8 lock)
|
|
{
|
|
int ret;
|
|
u8 buf[21];
|
|
struct i2c_msg msg[1] = {
|
|
{
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 3 + len,
|
|
.buf = buf,
|
|
}
|
|
};
|
|
|
|
if (3 + len > sizeof(buf)) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
buf[0] = (reg >> 8) & 0xff;
|
|
buf[1] = (reg >> 0) & 0xff;
|
|
buf[2] = cmd;
|
|
memcpy(&buf[3], val, len);
|
|
|
|
if (lock)
|
|
i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
|
|
ret = __i2c_transfer(client->adapter, msg, 1);
|
|
if (lock)
|
|
i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
|
|
if (ret < 0) {
|
|
goto err;
|
|
} else if (ret != 1) {
|
|
ret = -EREMOTEIO;
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_rregs(struct i2c_client *client, u8 cmd, u16 reg,
|
|
u8 *val, int len, u8 lock)
|
|
{
|
|
int ret;
|
|
u8 buf[3];
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 3,
|
|
.buf = buf,
|
|
}, {
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = len,
|
|
.buf = val,
|
|
}
|
|
};
|
|
|
|
buf[0] = (reg >> 8) & 0xff;
|
|
buf[1] = (reg >> 0) & 0xff;
|
|
buf[2] = cmd;
|
|
|
|
if (lock)
|
|
i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
|
|
ret = __i2c_transfer(client->adapter, msg, 2);
|
|
if (lock)
|
|
i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
|
|
if (ret < 0) {
|
|
goto err;
|
|
} else if (ret != 2) {
|
|
ret = -EREMOTEIO;
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_regmap_write(void *context, const void *data, size_t count)
|
|
{
|
|
struct i2c_client *client = context;
|
|
struct af9013_state *state = i2c_get_clientdata(client);
|
|
int ret, i;
|
|
u8 cmd;
|
|
u8 lock = !((u8 *)data)[0];
|
|
u16 reg = ((u8 *)data)[1] << 8 | ((u8 *)data)[2] << 0;
|
|
u8 *val = &((u8 *)data)[3];
|
|
const unsigned int len = count - 3;
|
|
|
|
if (state->ts_mode == AF9013_TS_MODE_USB && (reg & 0xff00) != 0xae00) {
|
|
cmd = 0 << 7|0 << 6|(len - 1) << 2|1 << 1|1 << 0;
|
|
ret = af9013_wregs(client, cmd, reg, val, len, lock);
|
|
if (ret)
|
|
goto err;
|
|
} else if (reg >= 0x5100 && reg < 0x8fff) {
|
|
/* Firmware download */
|
|
cmd = 1 << 7|1 << 6|(len - 1) << 2|1 << 1|1 << 0;
|
|
ret = af9013_wregs(client, cmd, reg, val, len, lock);
|
|
if (ret)
|
|
goto err;
|
|
} else {
|
|
cmd = 0 << 7|0 << 6|(1 - 1) << 2|1 << 1|1 << 0;
|
|
for (i = 0; i < len; i++) {
|
|
ret = af9013_wregs(client, cmd, reg + i, val + i, 1,
|
|
lock);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_regmap_read(void *context, const void *reg_buf,
|
|
size_t reg_size, void *val_buf, size_t val_size)
|
|
{
|
|
struct i2c_client *client = context;
|
|
struct af9013_state *state = i2c_get_clientdata(client);
|
|
int ret, i;
|
|
u8 cmd;
|
|
u8 lock = !((u8 *)reg_buf)[0];
|
|
u16 reg = ((u8 *)reg_buf)[1] << 8 | ((u8 *)reg_buf)[2] << 0;
|
|
u8 *val = &((u8 *)val_buf)[0];
|
|
const unsigned int len = val_size;
|
|
|
|
if (state->ts_mode == AF9013_TS_MODE_USB && (reg & 0xff00) != 0xae00) {
|
|
cmd = 0 << 7|0 << 6|(len - 1) << 2|1 << 1|0 << 0;
|
|
ret = af9013_rregs(client, cmd, reg, val_buf, len, lock);
|
|
if (ret)
|
|
goto err;
|
|
} else {
|
|
cmd = 0 << 7|0 << 6|(1 - 1) << 2|1 << 1|0 << 0;
|
|
for (i = 0; i < len; i++) {
|
|
ret = af9013_rregs(client, cmd, reg + i, val + i, 1,
|
|
lock);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct af9013_state *state;
|
|
struct af9013_platform_data *pdata = client->dev.platform_data;
|
|
struct dtv_frontend_properties *c;
|
|
int ret, i;
|
|
u8 firmware_version[4];
|
|
static const struct regmap_bus regmap_bus = {
|
|
.read = af9013_regmap_read,
|
|
.write = af9013_regmap_write,
|
|
};
|
|
static const struct regmap_config regmap_config = {
|
|
/* Actual reg is 16 bits, see i2c adapter lock */
|
|
.reg_bits = 24,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
state = kzalloc(sizeof(*state), GFP_KERNEL);
|
|
if (!state) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* Setup the state */
|
|
state->client = client;
|
|
i2c_set_clientdata(client, state);
|
|
state->clk = pdata->clk;
|
|
state->tuner = pdata->tuner;
|
|
state->if_frequency = pdata->if_frequency;
|
|
state->ts_mode = pdata->ts_mode;
|
|
state->ts_output_pin = pdata->ts_output_pin;
|
|
state->spec_inv = pdata->spec_inv;
|
|
memcpy(&state->api_version, pdata->api_version, sizeof(state->api_version));
|
|
memcpy(&state->gpio, pdata->gpio, sizeof(state->gpio));
|
|
state->regmap = regmap_init(&client->dev, ®map_bus, client,
|
|
®map_config);
|
|
if (IS_ERR(state->regmap)) {
|
|
ret = PTR_ERR(state->regmap);
|
|
goto err_kfree;
|
|
}
|
|
/* Create mux i2c adapter */
|
|
state->muxc = i2c_mux_alloc(client->adapter, &client->dev, 1, 0, 0,
|
|
af9013_select, af9013_deselect);
|
|
if (!state->muxc) {
|
|
ret = -ENOMEM;
|
|
goto err_regmap_exit;
|
|
}
|
|
state->muxc->priv = state;
|
|
ret = i2c_mux_add_adapter(state->muxc, 0, 0, 0);
|
|
if (ret)
|
|
goto err_regmap_exit;
|
|
|
|
/* Download firmware */
|
|
if (state->ts_mode != AF9013_TS_MODE_USB) {
|
|
ret = af9013_download_firmware(state);
|
|
if (ret)
|
|
goto err_i2c_mux_del_adapters;
|
|
}
|
|
|
|
/* Firmware version */
|
|
ret = regmap_bulk_read(state->regmap, 0x5103, firmware_version,
|
|
sizeof(firmware_version));
|
|
if (ret)
|
|
goto err_i2c_mux_del_adapters;
|
|
|
|
/* Set GPIOs */
|
|
for (i = 0; i < sizeof(state->gpio); i++) {
|
|
ret = af9013_set_gpio(state, i, state->gpio[i]);
|
|
if (ret)
|
|
goto err_i2c_mux_del_adapters;
|
|
}
|
|
|
|
/* Create dvb frontend */
|
|
memcpy(&state->fe.ops, &af9013_ops, sizeof(state->fe.ops));
|
|
state->fe.demodulator_priv = state;
|
|
|
|
/* Setup callbacks */
|
|
pdata->get_dvb_frontend = af9013_get_dvb_frontend;
|
|
pdata->get_i2c_adapter = af9013_get_i2c_adapter;
|
|
pdata->pid_filter = af9013_pid_filter;
|
|
pdata->pid_filter_ctrl = af9013_pid_filter_ctrl;
|
|
|
|
/* Init stats to indicate which stats are supported */
|
|
c = &state->fe.dtv_property_cache;
|
|
c->strength.len = 1;
|
|
c->cnr.len = 1;
|
|
c->post_bit_error.len = 1;
|
|
c->post_bit_count.len = 1;
|
|
c->block_error.len = 1;
|
|
c->block_count.len = 1;
|
|
|
|
dev_info(&client->dev, "Afatech AF9013 successfully attached\n");
|
|
dev_info(&client->dev, "firmware version: %d.%d.%d.%d\n",
|
|
firmware_version[0], firmware_version[1],
|
|
firmware_version[2], firmware_version[3]);
|
|
return 0;
|
|
err_i2c_mux_del_adapters:
|
|
i2c_mux_del_adapters(state->muxc);
|
|
err_regmap_exit:
|
|
regmap_exit(state->regmap);
|
|
err_kfree:
|
|
kfree(state);
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_remove(struct i2c_client *client)
|
|
{
|
|
struct af9013_state *state = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
i2c_mux_del_adapters(state->muxc);
|
|
|
|
regmap_exit(state->regmap);
|
|
|
|
kfree(state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id af9013_id_table[] = {
|
|
{"af9013", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, af9013_id_table);
|
|
|
|
static struct i2c_driver af9013_driver = {
|
|
.driver = {
|
|
.name = "af9013",
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = af9013_probe,
|
|
.remove = af9013_remove,
|
|
.id_table = af9013_id_table,
|
|
};
|
|
|
|
module_i2c_driver(af9013_driver);
|
|
|
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
|
MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE(AF9013_FIRMWARE);
|