mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 11:26:40 +07:00
0f29b46d49
Registrations options are specified through flags. Definitions of flags will be in subsequent patches. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
154 lines
5.1 KiB
Plaintext
154 lines
5.1 KiB
Plaintext
USERSPACE MAD ACCESS
|
|
|
|
Device files
|
|
|
|
Each port of each InfiniBand device has a "umad" device and an
|
|
"issm" device attached. For example, a two-port HCA will have two
|
|
umad devices and two issm devices, while a switch will have one
|
|
device of each type (for switch port 0).
|
|
|
|
Creating MAD agents
|
|
|
|
A MAD agent can be created by filling in a struct ib_user_mad_reg_req
|
|
and then calling the IB_USER_MAD_REGISTER_AGENT ioctl on a file
|
|
descriptor for the appropriate device file. If the registration
|
|
request succeeds, a 32-bit id will be returned in the structure.
|
|
For example:
|
|
|
|
struct ib_user_mad_reg_req req = { /* ... */ };
|
|
ret = ioctl(fd, IB_USER_MAD_REGISTER_AGENT, (char *) &req);
|
|
if (!ret)
|
|
my_agent = req.id;
|
|
else
|
|
perror("agent register");
|
|
|
|
Agents can be unregistered with the IB_USER_MAD_UNREGISTER_AGENT
|
|
ioctl. Also, all agents registered through a file descriptor will
|
|
be unregistered when the descriptor is closed.
|
|
|
|
2014 -- a new registration ioctl is now provided which allows additional
|
|
fields to be provided during registration.
|
|
Users of this registration call are implicitly setting the use of
|
|
pkey_index (see below).
|
|
|
|
Receiving MADs
|
|
|
|
MADs are received using read(). The receive side now supports
|
|
RMPP. The buffer passed to read() must be at least one
|
|
struct ib_user_mad + 256 bytes. For example:
|
|
|
|
If the buffer passed is not large enough to hold the received
|
|
MAD (RMPP), the errno is set to ENOSPC and the length of the
|
|
buffer needed is set in mad.length.
|
|
|
|
Example for normal MAD (non RMPP) reads:
|
|
struct ib_user_mad *mad;
|
|
mad = malloc(sizeof *mad + 256);
|
|
ret = read(fd, mad, sizeof *mad + 256);
|
|
if (ret != sizeof mad + 256) {
|
|
perror("read");
|
|
free(mad);
|
|
}
|
|
|
|
Example for RMPP reads:
|
|
struct ib_user_mad *mad;
|
|
mad = malloc(sizeof *mad + 256);
|
|
ret = read(fd, mad, sizeof *mad + 256);
|
|
if (ret == -ENOSPC)) {
|
|
length = mad.length;
|
|
free(mad);
|
|
mad = malloc(sizeof *mad + length);
|
|
ret = read(fd, mad, sizeof *mad + length);
|
|
}
|
|
if (ret < 0) {
|
|
perror("read");
|
|
free(mad);
|
|
}
|
|
|
|
In addition to the actual MAD contents, the other struct ib_user_mad
|
|
fields will be filled in with information on the received MAD. For
|
|
example, the remote LID will be in mad.lid.
|
|
|
|
If a send times out, a receive will be generated with mad.status set
|
|
to ETIMEDOUT. Otherwise when a MAD has been successfully received,
|
|
mad.status will be 0.
|
|
|
|
poll()/select() may be used to wait until a MAD can be read.
|
|
|
|
Sending MADs
|
|
|
|
MADs are sent using write(). The agent ID for sending should be
|
|
filled into the id field of the MAD, the destination LID should be
|
|
filled into the lid field, and so on. The send side does support
|
|
RMPP so arbitrary length MAD can be sent. For example:
|
|
|
|
struct ib_user_mad *mad;
|
|
|
|
mad = malloc(sizeof *mad + mad_length);
|
|
|
|
/* fill in mad->data */
|
|
|
|
mad->hdr.id = my_agent; /* req.id from agent registration */
|
|
mad->hdr.lid = my_dest; /* in network byte order... */
|
|
/* etc. */
|
|
|
|
ret = write(fd, &mad, sizeof *mad + mad_length);
|
|
if (ret != sizeof *mad + mad_length)
|
|
perror("write");
|
|
|
|
Transaction IDs
|
|
|
|
Users of the umad devices can use the lower 32 bits of the
|
|
transaction ID field (that is, the least significant half of the
|
|
field in network byte order) in MADs being sent to match
|
|
request/response pairs. The upper 32 bits are reserved for use by
|
|
the kernel and will be overwritten before a MAD is sent.
|
|
|
|
P_Key Index Handling
|
|
|
|
The old ib_umad interface did not allow setting the P_Key index for
|
|
MADs that are sent and did not provide a way for obtaining the P_Key
|
|
index of received MADs. A new layout for struct ib_user_mad_hdr
|
|
with a pkey_index member has been defined; however, to preserve binary
|
|
compatibility with older applications, this new layout will not be used
|
|
unless one of IB_USER_MAD_ENABLE_PKEY or IB_USER_MAD_REGISTER_AGENT2 ioctl's
|
|
are called before a file descriptor is used for anything else.
|
|
|
|
In September 2008, the IB_USER_MAD_ABI_VERSION will be incremented
|
|
to 6, the new layout of struct ib_user_mad_hdr will be used by
|
|
default, and the IB_USER_MAD_ENABLE_PKEY ioctl will be removed.
|
|
|
|
Setting IsSM Capability Bit
|
|
|
|
To set the IsSM capability bit for a port, simply open the
|
|
corresponding issm device file. If the IsSM bit is already set,
|
|
then the open call will block until the bit is cleared (or return
|
|
immediately with errno set to EAGAIN if the O_NONBLOCK flag is
|
|
passed to open()). The IsSM bit will be cleared when the issm file
|
|
is closed. No read, write or other operations can be performed on
|
|
the issm file.
|
|
|
|
/dev files
|
|
|
|
To create the appropriate character device files automatically with
|
|
udev, a rule like
|
|
|
|
KERNEL=="umad*", NAME="infiniband/%k"
|
|
KERNEL=="issm*", NAME="infiniband/%k"
|
|
|
|
can be used. This will create device nodes named
|
|
|
|
/dev/infiniband/umad0
|
|
/dev/infiniband/issm0
|
|
|
|
for the first port, and so on. The InfiniBand device and port
|
|
associated with these devices can be determined from the files
|
|
|
|
/sys/class/infiniband_mad/umad0/ibdev
|
|
/sys/class/infiniband_mad/umad0/port
|
|
|
|
and
|
|
|
|
/sys/class/infiniband_mad/issm0/ibdev
|
|
/sys/class/infiniband_mad/issm0/port
|