linux_dsm_epyc7002/arch/x86/kernel/tls.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

324 lines
7.6 KiB
C

// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/user.h>
#include <linux/regset.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <asm/desc.h>
#include <asm/ldt.h>
#include <asm/processor.h>
#include <asm/proto.h>
#include "tls.h"
/*
* sys_alloc_thread_area: get a yet unused TLS descriptor index.
*/
static int get_free_idx(void)
{
struct thread_struct *t = &current->thread;
int idx;
for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
if (desc_empty(&t->tls_array[idx]))
return idx + GDT_ENTRY_TLS_MIN;
return -ESRCH;
}
static bool tls_desc_okay(const struct user_desc *info)
{
/*
* For historical reasons (i.e. no one ever documented how any
* of the segmentation APIs work), user programs can and do
* assume that a struct user_desc that's all zeros except for
* entry_number means "no segment at all". This never actually
* worked. In fact, up to Linux 3.19, a struct user_desc like
* this would create a 16-bit read-write segment with base and
* limit both equal to zero.
*
* That was close enough to "no segment at all" until we
* hardened this function to disallow 16-bit TLS segments. Fix
* it up by interpreting these zeroed segments the way that they
* were almost certainly intended to be interpreted.
*
* The correct way to ask for "no segment at all" is to specify
* a user_desc that satisfies LDT_empty. To keep everything
* working, we accept both.
*
* Note that there's a similar kludge in modify_ldt -- look at
* the distinction between modes 1 and 0x11.
*/
if (LDT_empty(info) || LDT_zero(info))
return true;
/*
* espfix is required for 16-bit data segments, but espfix
* only works for LDT segments.
*/
if (!info->seg_32bit)
return false;
/* Only allow data segments in the TLS array. */
if (info->contents > 1)
return false;
/*
* Non-present segments with DPL 3 present an interesting attack
* surface. The kernel should handle such segments correctly,
* but TLS is very difficult to protect in a sandbox, so prevent
* such segments from being created.
*
* If userspace needs to remove a TLS entry, it can still delete
* it outright.
*/
if (info->seg_not_present)
return false;
return true;
}
static void set_tls_desc(struct task_struct *p, int idx,
const struct user_desc *info, int n)
{
struct thread_struct *t = &p->thread;
struct desc_struct *desc = &t->tls_array[idx - GDT_ENTRY_TLS_MIN];
int cpu;
/*
* We must not get preempted while modifying the TLS.
*/
cpu = get_cpu();
while (n-- > 0) {
if (LDT_empty(info) || LDT_zero(info)) {
memset(desc, 0, sizeof(*desc));
} else {
fill_ldt(desc, info);
/*
* Always set the accessed bit so that the CPU
* doesn't try to write to the (read-only) GDT.
*/
desc->type |= 1;
}
++info;
++desc;
}
if (t == &current->thread)
load_TLS(t, cpu);
put_cpu();
}
/*
* Set a given TLS descriptor:
*/
int do_set_thread_area(struct task_struct *p, int idx,
struct user_desc __user *u_info,
int can_allocate)
{
struct user_desc info;
unsigned short __maybe_unused sel, modified_sel;
if (copy_from_user(&info, u_info, sizeof(info)))
return -EFAULT;
if (!tls_desc_okay(&info))
return -EINVAL;
if (idx == -1)
idx = info.entry_number;
/*
* index -1 means the kernel should try to find and
* allocate an empty descriptor:
*/
if (idx == -1 && can_allocate) {
idx = get_free_idx();
if (idx < 0)
return idx;
if (put_user(idx, &u_info->entry_number))
return -EFAULT;
}
if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
return -EINVAL;
set_tls_desc(p, idx, &info, 1);
/*
* If DS, ES, FS, or GS points to the modified segment, forcibly
* refresh it. Only needed on x86_64 because x86_32 reloads them
* on return to user mode.
*/
modified_sel = (idx << 3) | 3;
if (p == current) {
#ifdef CONFIG_X86_64
savesegment(ds, sel);
if (sel == modified_sel)
loadsegment(ds, sel);
savesegment(es, sel);
if (sel == modified_sel)
loadsegment(es, sel);
savesegment(fs, sel);
if (sel == modified_sel)
loadsegment(fs, sel);
savesegment(gs, sel);
if (sel == modified_sel)
load_gs_index(sel);
#endif
#ifdef CONFIG_X86_32_LAZY_GS
savesegment(gs, sel);
if (sel == modified_sel)
loadsegment(gs, sel);
#endif
} else {
#ifdef CONFIG_X86_64
if (p->thread.fsindex == modified_sel)
p->thread.fsbase = info.base_addr;
if (p->thread.gsindex == modified_sel)
p->thread.gsbase = info.base_addr;
#endif
}
return 0;
}
SYSCALL_DEFINE1(set_thread_area, struct user_desc __user *, u_info)
{
return do_set_thread_area(current, -1, u_info, 1);
}
/*
* Get the current Thread-Local Storage area:
*/
static void fill_user_desc(struct user_desc *info, int idx,
const struct desc_struct *desc)
{
memset(info, 0, sizeof(*info));
info->entry_number = idx;
info->base_addr = get_desc_base(desc);
info->limit = get_desc_limit(desc);
info->seg_32bit = desc->d;
info->contents = desc->type >> 2;
info->read_exec_only = !(desc->type & 2);
info->limit_in_pages = desc->g;
info->seg_not_present = !desc->p;
info->useable = desc->avl;
#ifdef CONFIG_X86_64
info->lm = desc->l;
#endif
}
int do_get_thread_area(struct task_struct *p, int idx,
struct user_desc __user *u_info)
{
struct user_desc info;
if (idx == -1 && get_user(idx, &u_info->entry_number))
return -EFAULT;
if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
return -EINVAL;
fill_user_desc(&info, idx,
&p->thread.tls_array[idx - GDT_ENTRY_TLS_MIN]);
if (copy_to_user(u_info, &info, sizeof(info)))
return -EFAULT;
return 0;
}
SYSCALL_DEFINE1(get_thread_area, struct user_desc __user *, u_info)
{
return do_get_thread_area(current, -1, u_info);
}
int regset_tls_active(struct task_struct *target,
const struct user_regset *regset)
{
struct thread_struct *t = &target->thread;
int n = GDT_ENTRY_TLS_ENTRIES;
while (n > 0 && desc_empty(&t->tls_array[n - 1]))
--n;
return n;
}
int regset_tls_get(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
const struct desc_struct *tls;
if (pos >= GDT_ENTRY_TLS_ENTRIES * sizeof(struct user_desc) ||
(pos % sizeof(struct user_desc)) != 0 ||
(count % sizeof(struct user_desc)) != 0)
return -EINVAL;
pos /= sizeof(struct user_desc);
count /= sizeof(struct user_desc);
tls = &target->thread.tls_array[pos];
if (kbuf) {
struct user_desc *info = kbuf;
while (count-- > 0)
fill_user_desc(info++, GDT_ENTRY_TLS_MIN + pos++,
tls++);
} else {
struct user_desc __user *u_info = ubuf;
while (count-- > 0) {
struct user_desc info;
fill_user_desc(&info, GDT_ENTRY_TLS_MIN + pos++, tls++);
if (__copy_to_user(u_info++, &info, sizeof(info)))
return -EFAULT;
}
}
return 0;
}
int regset_tls_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
struct user_desc infobuf[GDT_ENTRY_TLS_ENTRIES];
const struct user_desc *info;
int i;
if (pos >= GDT_ENTRY_TLS_ENTRIES * sizeof(struct user_desc) ||
(pos % sizeof(struct user_desc)) != 0 ||
(count % sizeof(struct user_desc)) != 0)
return -EINVAL;
if (kbuf)
info = kbuf;
else if (__copy_from_user(infobuf, ubuf, count))
return -EFAULT;
else
info = infobuf;
for (i = 0; i < count / sizeof(struct user_desc); i++)
if (!tls_desc_okay(info + i))
return -EINVAL;
set_tls_desc(target,
GDT_ENTRY_TLS_MIN + (pos / sizeof(struct user_desc)),
info, count / sizeof(struct user_desc));
return 0;
}