mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 10:36:55 +07:00
2ec64c9d0d
A platform_driver need not set an owner since it will be populated by platform_driver_register(). Likewise for mcb_driver (gpio-menz127.c). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
429 lines
10 KiB
C
429 lines
10 KiB
C
/*
|
|
* GPIO driver for the SMSC SCH311x Super-I/O chips
|
|
*
|
|
* Copyright (C) 2013 Bruno Randolf <br1@einfach.org>
|
|
*
|
|
* SuperIO functions and chip detection:
|
|
* (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/ioport.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/io.h>
|
|
|
|
#define DRV_NAME "gpio-sch311x"
|
|
|
|
#define SCH311X_GPIO_CONF_OUT 0x00
|
|
#define SCH311X_GPIO_CONF_IN 0x01
|
|
#define SCH311X_GPIO_CONF_INVERT 0x02
|
|
#define SCH311X_GPIO_CONF_OPEN_DRAIN 0x80
|
|
|
|
#define SIO_CONFIG_KEY_ENTER 0x55
|
|
#define SIO_CONFIG_KEY_EXIT 0xaa
|
|
|
|
#define GP1 0x4b
|
|
|
|
static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e };
|
|
|
|
static struct platform_device *sch311x_gpio_pdev;
|
|
|
|
struct sch311x_pdev_data { /* platform device data */
|
|
unsigned short runtime_reg; /* runtime register base address */
|
|
};
|
|
|
|
struct sch311x_gpio_block { /* one GPIO block runtime data */
|
|
struct gpio_chip chip;
|
|
unsigned short data_reg; /* from definition below */
|
|
unsigned short *config_regs; /* pointer to definition below */
|
|
unsigned short runtime_reg; /* runtime register */
|
|
spinlock_t lock; /* lock for this GPIO block */
|
|
};
|
|
|
|
struct sch311x_gpio_priv { /* driver private data */
|
|
struct sch311x_gpio_block blocks[6];
|
|
};
|
|
|
|
struct sch311x_gpio_block_def { /* register address definitions */
|
|
unsigned short data_reg;
|
|
unsigned short config_regs[8];
|
|
unsigned short base;
|
|
};
|
|
|
|
/* Note: some GPIOs are not available, these are marked with 0x00 */
|
|
|
|
static struct sch311x_gpio_block_def sch311x_gpio_blocks[] = {
|
|
{
|
|
.data_reg = 0x4b, /* GP1 */
|
|
.config_regs = {0x23, 0x24, 0x25, 0x26, 0x27, 0x29, 0x2a, 0x2b},
|
|
.base = 10,
|
|
},
|
|
{
|
|
.data_reg = 0x4c, /* GP2 */
|
|
.config_regs = {0x00, 0x2c, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x32},
|
|
.base = 20,
|
|
},
|
|
{
|
|
.data_reg = 0x4d, /* GP3 */
|
|
.config_regs = {0x33, 0x34, 0x35, 0x36, 0x37, 0x00, 0x39, 0x3a},
|
|
.base = 30,
|
|
},
|
|
{
|
|
.data_reg = 0x4e, /* GP4 */
|
|
.config_regs = {0x3b, 0x00, 0x3d, 0x00, 0x6e, 0x6f, 0x72, 0x73},
|
|
.base = 40,
|
|
},
|
|
{
|
|
.data_reg = 0x4f, /* GP5 */
|
|
.config_regs = {0x3f, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46},
|
|
.base = 50,
|
|
},
|
|
{
|
|
.data_reg = 0x50, /* GP6 */
|
|
.config_regs = {0x47, 0x48, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59},
|
|
.base = 60,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Super-IO functions
|
|
*/
|
|
|
|
static inline int sch311x_sio_enter(int sio_config_port)
|
|
{
|
|
/* Don't step on other drivers' I/O space by accident. */
|
|
if (!request_muxed_region(sio_config_port, 2, DRV_NAME)) {
|
|
pr_err(DRV_NAME "I/O address 0x%04x already in use\n",
|
|
sio_config_port);
|
|
return -EBUSY;
|
|
}
|
|
|
|
outb(SIO_CONFIG_KEY_ENTER, sio_config_port);
|
|
return 0;
|
|
}
|
|
|
|
static inline void sch311x_sio_exit(int sio_config_port)
|
|
{
|
|
outb(SIO_CONFIG_KEY_EXIT, sio_config_port);
|
|
release_region(sio_config_port, 2);
|
|
}
|
|
|
|
static inline int sch311x_sio_inb(int sio_config_port, int reg)
|
|
{
|
|
outb(reg, sio_config_port);
|
|
return inb(sio_config_port + 1);
|
|
}
|
|
|
|
static inline void sch311x_sio_outb(int sio_config_port, int reg, int val)
|
|
{
|
|
outb(reg, sio_config_port);
|
|
outb(val, sio_config_port + 1);
|
|
}
|
|
|
|
|
|
/*
|
|
* GPIO functions
|
|
*/
|
|
|
|
static int sch311x_gpio_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct sch311x_gpio_block *block = gpiochip_get_data(chip);
|
|
|
|
if (block->config_regs[offset] == 0) /* GPIO is not available */
|
|
return -ENODEV;
|
|
|
|
if (!request_region(block->runtime_reg + block->config_regs[offset],
|
|
1, DRV_NAME)) {
|
|
dev_err(chip->parent, "Failed to request region 0x%04x.\n",
|
|
block->runtime_reg + block->config_regs[offset]);
|
|
return -EBUSY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void sch311x_gpio_free(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct sch311x_gpio_block *block = gpiochip_get_data(chip);
|
|
|
|
if (block->config_regs[offset] == 0) /* GPIO is not available */
|
|
return;
|
|
|
|
release_region(block->runtime_reg + block->config_regs[offset], 1);
|
|
}
|
|
|
|
static int sch311x_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct sch311x_gpio_block *block = gpiochip_get_data(chip);
|
|
unsigned char data;
|
|
|
|
spin_lock(&block->lock);
|
|
data = inb(block->runtime_reg + block->data_reg);
|
|
spin_unlock(&block->lock);
|
|
|
|
return !!(data & BIT(offset));
|
|
}
|
|
|
|
static void __sch311x_gpio_set(struct sch311x_gpio_block *block,
|
|
unsigned offset, int value)
|
|
{
|
|
unsigned char data = inb(block->runtime_reg + block->data_reg);
|
|
if (value)
|
|
data |= BIT(offset);
|
|
else
|
|
data &= ~BIT(offset);
|
|
outb(data, block->runtime_reg + block->data_reg);
|
|
}
|
|
|
|
static void sch311x_gpio_set(struct gpio_chip *chip, unsigned offset,
|
|
int value)
|
|
{
|
|
struct sch311x_gpio_block *block = gpiochip_get_data(chip);
|
|
|
|
spin_lock(&block->lock);
|
|
__sch311x_gpio_set(block, offset, value);
|
|
spin_unlock(&block->lock);
|
|
}
|
|
|
|
static int sch311x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct sch311x_gpio_block *block = gpiochip_get_data(chip);
|
|
|
|
spin_lock(&block->lock);
|
|
outb(SCH311X_GPIO_CONF_IN, block->runtime_reg +
|
|
block->config_regs[offset]);
|
|
spin_unlock(&block->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sch311x_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
|
|
int value)
|
|
{
|
|
struct sch311x_gpio_block *block = gpiochip_get_data(chip);
|
|
|
|
spin_lock(&block->lock);
|
|
|
|
outb(SCH311X_GPIO_CONF_OUT, block->runtime_reg +
|
|
block->config_regs[offset]);
|
|
|
|
__sch311x_gpio_set(block, offset, value);
|
|
|
|
spin_unlock(&block->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int sch311x_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct sch311x_pdev_data *pdata = dev_get_platdata(&pdev->dev);
|
|
struct sch311x_gpio_priv *priv;
|
|
struct sch311x_gpio_block *block;
|
|
int err, i;
|
|
|
|
/* we can register all GPIO data registers at once */
|
|
if (!devm_request_region(&pdev->dev, pdata->runtime_reg + GP1, 6,
|
|
DRV_NAME)) {
|
|
dev_err(&pdev->dev, "Failed to request region 0x%04x-0x%04x.\n",
|
|
pdata->runtime_reg + GP1, pdata->runtime_reg + GP1 + 5);
|
|
return -EBUSY;
|
|
}
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) {
|
|
block = &priv->blocks[i];
|
|
|
|
spin_lock_init(&block->lock);
|
|
|
|
block->chip.label = DRV_NAME;
|
|
block->chip.owner = THIS_MODULE;
|
|
block->chip.request = sch311x_gpio_request;
|
|
block->chip.free = sch311x_gpio_free;
|
|
block->chip.direction_input = sch311x_gpio_direction_in;
|
|
block->chip.direction_output = sch311x_gpio_direction_out;
|
|
block->chip.get = sch311x_gpio_get;
|
|
block->chip.set = sch311x_gpio_set;
|
|
block->chip.ngpio = 8;
|
|
block->chip.parent = &pdev->dev;
|
|
block->chip.base = sch311x_gpio_blocks[i].base;
|
|
block->config_regs = sch311x_gpio_blocks[i].config_regs;
|
|
block->data_reg = sch311x_gpio_blocks[i].data_reg;
|
|
block->runtime_reg = pdata->runtime_reg;
|
|
|
|
err = gpiochip_add_data(&block->chip, block);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev,
|
|
"Could not register gpiochip, %d\n", err);
|
|
goto exit_err;
|
|
}
|
|
dev_info(&pdev->dev,
|
|
"SMSC SCH311x GPIO block %d registered.\n", i);
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_err:
|
|
/* release already registered chips */
|
|
for (--i; i >= 0; i--)
|
|
gpiochip_remove(&priv->blocks[i].chip);
|
|
return err;
|
|
}
|
|
|
|
static int sch311x_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct sch311x_gpio_priv *priv = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) {
|
|
gpiochip_remove(&priv->blocks[i].chip);
|
|
dev_info(&pdev->dev,
|
|
"SMSC SCH311x GPIO block %d unregistered.\n", i);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sch311x_gpio_driver = {
|
|
.driver.name = DRV_NAME,
|
|
.probe = sch311x_gpio_probe,
|
|
.remove = sch311x_gpio_remove,
|
|
};
|
|
|
|
|
|
/*
|
|
* Init & exit routines
|
|
*/
|
|
|
|
static int __init sch311x_detect(int sio_config_port, unsigned short *addr)
|
|
{
|
|
int err = 0, reg;
|
|
unsigned short base_addr;
|
|
unsigned char dev_id;
|
|
|
|
err = sch311x_sio_enter(sio_config_port);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Check device ID. */
|
|
reg = sch311x_sio_inb(sio_config_port, 0x20);
|
|
switch (reg) {
|
|
case 0x7c: /* SCH3112 */
|
|
dev_id = 2;
|
|
break;
|
|
case 0x7d: /* SCH3114 */
|
|
dev_id = 4;
|
|
break;
|
|
case 0x7f: /* SCH3116 */
|
|
dev_id = 6;
|
|
break;
|
|
default:
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
/* Select logical device A (runtime registers) */
|
|
sch311x_sio_outb(sio_config_port, 0x07, 0x0a);
|
|
|
|
/* Check if Logical Device Register is currently active */
|
|
if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0)
|
|
pr_info("Seems that LDN 0x0a is not active...\n");
|
|
|
|
/* Get the base address of the runtime registers */
|
|
base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) |
|
|
sch311x_sio_inb(sio_config_port, 0x61);
|
|
if (!base_addr) {
|
|
pr_err("Base address not set\n");
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
*addr = base_addr;
|
|
|
|
pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr);
|
|
|
|
exit:
|
|
sch311x_sio_exit(sio_config_port);
|
|
return err;
|
|
}
|
|
|
|
static int __init sch311x_gpio_pdev_add(const unsigned short addr)
|
|
{
|
|
struct sch311x_pdev_data pdata;
|
|
int err;
|
|
|
|
pdata.runtime_reg = addr;
|
|
|
|
sch311x_gpio_pdev = platform_device_alloc(DRV_NAME, -1);
|
|
if (!sch311x_gpio_pdev)
|
|
return -ENOMEM;
|
|
|
|
err = platform_device_add_data(sch311x_gpio_pdev,
|
|
&pdata, sizeof(pdata));
|
|
if (err) {
|
|
pr_err(DRV_NAME "Platform data allocation failed\n");
|
|
goto err;
|
|
}
|
|
|
|
err = platform_device_add(sch311x_gpio_pdev);
|
|
if (err) {
|
|
pr_err(DRV_NAME "Device addition failed\n");
|
|
goto err;
|
|
}
|
|
return 0;
|
|
|
|
err:
|
|
platform_device_put(sch311x_gpio_pdev);
|
|
return err;
|
|
}
|
|
|
|
static int __init sch311x_gpio_init(void)
|
|
{
|
|
int err, i;
|
|
unsigned short addr = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sch311x_ioports); i++)
|
|
if (sch311x_detect(sch311x_ioports[i], &addr) == 0)
|
|
break;
|
|
|
|
if (!addr)
|
|
return -ENODEV;
|
|
|
|
err = platform_driver_register(&sch311x_gpio_driver);
|
|
if (err)
|
|
return err;
|
|
|
|
err = sch311x_gpio_pdev_add(addr);
|
|
if (err)
|
|
goto unreg_platform_driver;
|
|
|
|
return 0;
|
|
|
|
unreg_platform_driver:
|
|
platform_driver_unregister(&sch311x_gpio_driver);
|
|
return err;
|
|
}
|
|
|
|
static void __exit sch311x_gpio_exit(void)
|
|
{
|
|
platform_device_unregister(sch311x_gpio_pdev);
|
|
platform_driver_unregister(&sch311x_gpio_driver);
|
|
}
|
|
|
|
module_init(sch311x_gpio_init);
|
|
module_exit(sch311x_gpio_exit);
|
|
|
|
MODULE_AUTHOR("Bruno Randolf <br1@einfach.org>");
|
|
MODULE_DESCRIPTION("SMSC SCH311x GPIO Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:gpio-sch311x");
|