mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 17:26:38 +07:00
aa8d6b73ea
Historically, this support was in arch/arm/mach-pxa/lubbock.c and
arch/arm/mach-pxa/mainstone.c. When gpio-pxa was moved to drivers/pxa,
it became a driver, and its initialization and probing happened at
postcore initcall. The lubbock code used to install the chained lubbock
interrupt handler at init_irq() time.
The consequence of the gpio-pxa change is that the installed chained irq
handler lubbock_irq_handler() was overwritten in pxa_gpio_probe(_dt)(),
removing :
- the handler
- the falling edge detection setting of GPIO0, which revealed the
interrupt request from the lubbock IO board.
As a fix, move the gpio0 chained handler setup to a place where we have
the guarantee that pxa_gpio_probe() was called before, so that lubbock
handler becomes the true IRQ chained handler of GPIO0, demuxing the
lubbock IO board interrupts.
This patch moves all that handling to a mfd driver. It's only purpose
for the time being is the interrupt handling, but in the future it
should encompass all the motherboard CPLDs handling :
- leds
- switches
- hexleds
The same logic applies to mainstone board.
Fixes: 157d2644cb ("ARM: pxa: change gpio to platform device")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
704 lines
14 KiB
Plaintext
704 lines
14 KiB
Plaintext
if ARCH_PXA
|
|
|
|
menu "Intel PXA2xx/PXA3xx Implementations"
|
|
|
|
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
|
|
|
|
config MACH_PXA27X_DT
|
|
bool "Support PXA27x platforms from device tree"
|
|
select POWER_SUPPLY
|
|
select PXA27x
|
|
select USE_OF
|
|
help
|
|
Include support for Marvell PXA27x based platforms using
|
|
the device tree. Needn't select any other machine while
|
|
MACH_PXA27X_DT is enabled.
|
|
|
|
config MACH_PXA3XX_DT
|
|
bool "Support PXA3xx platforms from device tree"
|
|
select CPU_PXA300
|
|
select POWER_SUPPLY
|
|
select PXA3xx
|
|
select USE_OF
|
|
help
|
|
Include support for Marvell PXA3xx based platforms using
|
|
the device tree. Needn't select any other machine while
|
|
MACH_PXA3XX_DT is enabled.
|
|
|
|
config ARCH_LUBBOCK
|
|
bool "Intel DBPXA250 Development Platform (aka Lubbock)"
|
|
select PXA25x
|
|
select SA1111
|
|
|
|
config MACH_MAINSTONE
|
|
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
|
|
select PXA27x
|
|
|
|
config MACH_ZYLONITE
|
|
bool
|
|
select PXA3xx
|
|
|
|
config MACH_ZYLONITE300
|
|
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
|
|
select CPU_PXA300
|
|
select CPU_PXA310
|
|
select MACH_ZYLONITE
|
|
|
|
config MACH_ZYLONITE320
|
|
bool "PXA3xx Development Platform (aka Zylonite) PXA320"
|
|
select CPU_PXA320
|
|
select MACH_ZYLONITE
|
|
|
|
config MACH_LITTLETON
|
|
bool "PXA3xx Form Factor Platform (aka Littleton)"
|
|
select CPU_PXA300
|
|
select CPU_PXA310
|
|
select PXA3xx
|
|
|
|
config MACH_TAVOREVB
|
|
bool "PXA930 Evaluation Board (aka TavorEVB)"
|
|
select CPU_PXA930
|
|
select CPU_PXA935
|
|
select PXA3xx
|
|
select FB
|
|
select FB_PXA
|
|
|
|
config MACH_SAAR
|
|
bool "PXA930 Handheld Platform (aka SAAR)"
|
|
select CPU_PXA930
|
|
select CPU_PXA935
|
|
select PXA3xx
|
|
select FB
|
|
select FB_PXA
|
|
|
|
comment "Third Party Dev Platforms (sorted by vendor name)"
|
|
|
|
config ARCH_PXA_IDP
|
|
bool "Accelent Xscale IDP"
|
|
select PXA25x
|
|
|
|
config ARCH_VIPER
|
|
bool "Arcom/Eurotech VIPER SBC"
|
|
select ARCOM_PCMCIA
|
|
select I2C_GPIO if I2C=y
|
|
select ISA
|
|
select PXA25x
|
|
|
|
config MACH_ARCOM_ZEUS
|
|
bool "Arcom/Eurotech ZEUS SBC"
|
|
select ARCOM_PCMCIA
|
|
select ISA
|
|
select PXA27x
|
|
|
|
config MACH_BALLOON3
|
|
bool "Balloon 3 board"
|
|
select IWMMXT
|
|
select PXA27x
|
|
|
|
config MACH_CSB726
|
|
bool "Enable Cogent CSB726 System On a Module"
|
|
select IWMMXT
|
|
select PXA27x
|
|
help
|
|
Say Y here if you intend to run this kernel on a Cogent
|
|
CSB726 System On Module.
|
|
|
|
config CSB726_CSB701
|
|
bool "Enable support for CSB701 baseboard"
|
|
depends on MACH_CSB726
|
|
|
|
config MACH_ARMCORE
|
|
bool "CompuLab CM-X255/CM-X270 modules"
|
|
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
|
|
select IWMMXT
|
|
select MIGHT_HAVE_PCI
|
|
select NEED_MACH_IO_H if PCI
|
|
select PXA25x
|
|
select PXA27x
|
|
|
|
config MACH_EM_X270
|
|
bool "CompuLab EM-x270 platform"
|
|
select PXA27x
|
|
|
|
config MACH_EXEDA
|
|
bool "CompuLab eXeda platform"
|
|
select PXA27x
|
|
|
|
config MACH_CM_X300
|
|
bool "CompuLab CM-X300 modules"
|
|
select CPU_PXA300
|
|
select CPU_PXA310
|
|
select PXA3xx
|
|
|
|
config MACH_CAPC7117
|
|
bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
|
|
select CPU_PXA320
|
|
select PXA3xx
|
|
|
|
config ARCH_GUMSTIX
|
|
bool "Gumstix XScale 255 boards"
|
|
select PXA25x
|
|
help
|
|
Say Y here if you intend to run this kernel on
|
|
Basix, Connex, ws-200ax, ws-400ax systems
|
|
|
|
choice
|
|
prompt "Gumstix Carrier/Expansion Board"
|
|
depends on ARCH_GUMSTIX
|
|
|
|
config GUMSTIX_AM200EPD
|
|
bool "Enable AM200EPD board support"
|
|
|
|
config GUMSTIX_AM300EPD
|
|
bool "Enable AM300EPD board support"
|
|
|
|
endchoice
|
|
|
|
config MACH_INTELMOTE2
|
|
bool "Intel Mote 2 Platform"
|
|
select IWMMXT
|
|
select PXA27x
|
|
|
|
config MACH_STARGATE2
|
|
bool "Intel Stargate 2 Platform"
|
|
select IWMMXT
|
|
select PXA27x
|
|
|
|
config MACH_XCEP
|
|
bool "Iskratel Electronics XCEP"
|
|
select MTD
|
|
select MTD_CFI
|
|
select MTD_CFI_INTELEXT
|
|
select MTD_PHYSMAP
|
|
select PXA25x
|
|
help
|
|
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
|
|
Tuned for usage in Libera instruments for particle accelerators.
|
|
|
|
config TRIZEPS_PXA
|
|
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
|
|
|
|
config MACH_TRIZEPS4
|
|
bool "Keith und Koep Trizeps4 DIMM-Module"
|
|
depends on TRIZEPS_PXA
|
|
select PXA27x
|
|
select TRIZEPS_PCMCIA
|
|
|
|
config MACH_TRIZEPS4WL
|
|
bool "Keith und Koep Trizeps4-WL DIMM-Module"
|
|
depends on TRIZEPS_PXA
|
|
select MACH_TRIZEPS4
|
|
select PXA27x
|
|
select TRIZEPS_PCMCIA
|
|
|
|
choice
|
|
prompt "Select base board for Trizeps module"
|
|
depends on TRIZEPS_PXA
|
|
|
|
config MACH_TRIZEPS_CONXS
|
|
bool "ConXS Eval Board"
|
|
|
|
config MACH_TRIZEPS_UCONXS
|
|
bool "uConXS Eval Board"
|
|
|
|
config MACH_TRIZEPS_ANY
|
|
bool "another Board"
|
|
|
|
endchoice
|
|
|
|
config ARCOM_PCMCIA
|
|
bool
|
|
help
|
|
Generic option for Arcom Viper/Zeus PCMCIA
|
|
|
|
config TRIZEPS_PCMCIA
|
|
bool
|
|
help
|
|
Enable PCMCIA support for Trizeps modules
|
|
|
|
config MACH_LOGICPD_PXA270
|
|
bool "LogicPD PXA270 Card Engine Development Platform"
|
|
select PXA27x
|
|
|
|
config MACH_PCM027
|
|
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
|
|
select IWMMXT
|
|
select PXA27x
|
|
|
|
config MACH_PCM990_BASEBOARD
|
|
bool "PHYTEC PCM-990 development board"
|
|
depends on MACH_PCM027
|
|
|
|
choice
|
|
prompt "display on pcm990"
|
|
depends on MACH_PCM990_BASEBOARD
|
|
|
|
config PCM990_DISPLAY_SHARP
|
|
bool "sharp lq084v1dg21 stn display"
|
|
|
|
config PCM990_DISPLAY_NEC
|
|
bool "nec nl6448bc20_18d tft display"
|
|
|
|
config PCM990_DISPLAY_NONE
|
|
bool "no display"
|
|
|
|
endchoice
|
|
|
|
config MACH_COLIBRI
|
|
bool "Toradex Colibri PXA270"
|
|
select PXA27x
|
|
|
|
config MACH_COLIBRI_PXA270_INCOME
|
|
bool "Income s.r.o. PXA270 SBC"
|
|
depends on MACH_COLIBRI
|
|
select PXA27x
|
|
|
|
config MACH_COLIBRI300
|
|
bool "Toradex Colibri PXA300/310"
|
|
select CPU_PXA300
|
|
select CPU_PXA310
|
|
select PXA3xx
|
|
|
|
config MACH_COLIBRI320
|
|
bool "Toradex Colibri PXA320"
|
|
select CPU_PXA320
|
|
select PXA3xx
|
|
|
|
config MACH_COLIBRI_EVALBOARD
|
|
bool "Toradex Colibri Evaluation Carrier Board support"
|
|
depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
|
|
|
|
config MACH_VPAC270
|
|
bool "Voipac PXA270"
|
|
select HAVE_PATA_PLATFORM
|
|
select PXA27x
|
|
help
|
|
PXA270 based Single Board Computer.
|
|
|
|
comment "End-user Products (sorted by vendor name)"
|
|
|
|
config MACH_H4700
|
|
bool "HP iPAQ hx4700"
|
|
select IWMMXT
|
|
select PXA27x
|
|
|
|
config MACH_H5000
|
|
bool "HP iPAQ h5000"
|
|
select PXA25x
|
|
|
|
config MACH_HIMALAYA
|
|
bool "HTC Himalaya Support"
|
|
select CPU_PXA26x
|
|
|
|
config MACH_MAGICIAN
|
|
bool "Enable HTC Magician Support"
|
|
select IWMMXT
|
|
select PXA27x
|
|
|
|
config MACH_MIOA701
|
|
bool "Mitac Mio A701 Support"
|
|
select GPIO_SYSFS
|
|
select IWMMXT
|
|
select PXA27x
|
|
help
|
|
Say Y here if you intend to run this kernel on a
|
|
MIO A701. Currently there is only basic support
|
|
for this PDA.
|
|
|
|
config PXA_EZX
|
|
bool "Motorola EZX Platform"
|
|
select IWMMXT
|
|
select PXA27x
|
|
|
|
config MACH_EZX_A780
|
|
bool "Motorola EZX A780"
|
|
default y
|
|
depends on PXA_EZX
|
|
|
|
config MACH_EZX_E680
|
|
bool "Motorola EZX E680"
|
|
default y
|
|
depends on PXA_EZX
|
|
|
|
config MACH_EZX_A1200
|
|
bool "Motorola EZX A1200"
|
|
default y
|
|
depends on PXA_EZX
|
|
|
|
config MACH_EZX_A910
|
|
bool "Motorola EZX A910"
|
|
default y
|
|
depends on PXA_EZX
|
|
|
|
config MACH_EZX_E6
|
|
bool "Motorola EZX E6"
|
|
default y
|
|
depends on PXA_EZX
|
|
|
|
config MACH_EZX_E2
|
|
bool "Motorola EZX E2"
|
|
default y
|
|
depends on PXA_EZX
|
|
|
|
config MACH_MP900C
|
|
bool "Nec Mobilepro 900/c"
|
|
select PXA25x
|
|
|
|
config ARCH_PXA_PALM
|
|
bool "PXA based Palm PDAs"
|
|
|
|
config MACH_PALM27X
|
|
bool
|
|
|
|
config MACH_PALMTE2
|
|
bool "Palm Tungsten|E2"
|
|
default y
|
|
depends on ARCH_PXA_PALM
|
|
select PXA25x
|
|
help
|
|
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
|
|
handheld computer.
|
|
|
|
config MACH_PALMTC
|
|
bool "Palm Tungsten|C"
|
|
default y
|
|
depends on ARCH_PXA_PALM
|
|
select PXA25x
|
|
help
|
|
Say Y here if you intend to run this kernel on a Palm Tungsten|C
|
|
handheld computer.
|
|
|
|
config MACH_PALMT5
|
|
bool "Palm Tungsten|T5"
|
|
default y
|
|
depends on ARCH_PXA_PALM
|
|
select IWMMXT
|
|
select MACH_PALM27X
|
|
select PXA27x
|
|
help
|
|
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
|
|
handheld computer.
|
|
|
|
config MACH_PALMTX
|
|
bool "Palm T|X"
|
|
default y
|
|
depends on ARCH_PXA_PALM
|
|
select IWMMXT
|
|
select MACH_PALM27X
|
|
select PXA27x
|
|
help
|
|
Say Y here if you intend to run this kernel on a Palm T|X
|
|
handheld computer.
|
|
|
|
config MACH_PALMZ72
|
|
bool "Palm Zire 72"
|
|
default y
|
|
depends on ARCH_PXA_PALM
|
|
select IWMMXT
|
|
select MACH_PALM27X
|
|
select PXA27x
|
|
help
|
|
Say Y here if you intend to run this kernel on Palm Zire 72
|
|
handheld computer.
|
|
|
|
config MACH_PALMLD
|
|
bool "Palm LifeDrive"
|
|
default y
|
|
depends on ARCH_PXA_PALM
|
|
select IWMMXT
|
|
select MACH_PALM27X
|
|
select PXA27x
|
|
help
|
|
Say Y here if you intend to run this kernel on a Palm LifeDrive
|
|
handheld computer.
|
|
|
|
config PALM_TREO
|
|
bool
|
|
depends on ARCH_PXA_PALM
|
|
|
|
config MACH_CENTRO
|
|
bool "Palm Centro 685 (GSM)"
|
|
default y
|
|
depends on ARCH_PXA_PALM
|
|
select IWMMXT
|
|
select MACH_PALM27X
|
|
select PALM_TREO
|
|
select PXA27x
|
|
help
|
|
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
|
|
smartphone.
|
|
|
|
config MACH_TREO680
|
|
bool "Palm Treo 680"
|
|
default y
|
|
depends on ARCH_PXA_PALM
|
|
select IWMMXT
|
|
select MACH_PALM27X
|
|
select PALM_TREO
|
|
select PXA27x
|
|
help
|
|
Say Y here if you intend to run this kernel on Palm Treo 680
|
|
smartphone.
|
|
|
|
config MACH_RAUMFELD_RC
|
|
bool "Raumfeld Controller"
|
|
select CPU_PXA300
|
|
select POWER_SUPPLY
|
|
select PXA3xx
|
|
|
|
config MACH_RAUMFELD_CONNECTOR
|
|
bool "Raumfeld Connector"
|
|
select CPU_PXA300
|
|
select POWER_SUPPLY
|
|
select PXA3xx
|
|
|
|
config MACH_RAUMFELD_SPEAKER
|
|
bool "Raumfeld Speaker"
|
|
select CPU_PXA300
|
|
select POWER_SUPPLY
|
|
select PXA3xx
|
|
|
|
config PXA_SHARPSL
|
|
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
|
|
select SHARP_PARAM
|
|
select SHARP_SCOOP
|
|
help
|
|
Say Y here if you intend to run this kernel on a
|
|
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
|
|
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
|
|
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
|
|
handheld computer.
|
|
|
|
config PXA_SHARPSL_DETECT_MACH_ID
|
|
bool "Detect machine ID at run-time in the decompressor"
|
|
depends on PXA_SHARPSL
|
|
help
|
|
Say Y here if you want the zImage decompressor to detect
|
|
the Zaurus machine ID at run-time. For latest kexec-based
|
|
boot loader, this is not necessary.
|
|
|
|
config MACH_POODLE
|
|
bool "Enable Sharp SL-5600 (Poodle) Support"
|
|
depends on PXA_SHARPSL
|
|
select PXA25x
|
|
select SHARP_LOCOMO
|
|
|
|
config MACH_CORGI
|
|
bool "Enable Sharp SL-C700 (Corgi) Support"
|
|
depends on PXA_SHARPSL
|
|
select PXA25x
|
|
select PXA_SHARP_C7xx
|
|
|
|
config MACH_SHEPHERD
|
|
bool "Enable Sharp SL-C750 (Shepherd) Support"
|
|
depends on PXA_SHARPSL
|
|
select PXA25x
|
|
select PXA_SHARP_C7xx
|
|
|
|
config MACH_HUSKY
|
|
bool "Enable Sharp SL-C760 (Husky) Support"
|
|
depends on PXA_SHARPSL
|
|
select PXA25x
|
|
select PXA_SHARP_C7xx
|
|
|
|
config MACH_AKITA
|
|
bool "Enable Sharp SL-1000 (Akita) Support"
|
|
depends on PXA_SHARPSL
|
|
select I2C
|
|
select I2C_PXA
|
|
select MACH_SPITZ
|
|
select PXA27x
|
|
select PXA_SHARP_Cxx00
|
|
|
|
config MACH_SPITZ
|
|
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
|
|
depends on PXA_SHARPSL
|
|
select PXA27x
|
|
select PXA_SHARP_Cxx00
|
|
|
|
config MACH_BORZOI
|
|
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
|
|
depends on PXA_SHARPSL
|
|
select PXA27x
|
|
select PXA_SHARP_Cxx00
|
|
|
|
config MACH_TOSA
|
|
bool "Enable Sharp SL-6000x (Tosa) Support"
|
|
depends on PXA_SHARPSL
|
|
select PXA25x
|
|
|
|
config TOSA_BT
|
|
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
|
|
depends on MACH_TOSA
|
|
select RFKILL
|
|
help
|
|
This is a simple driver that is able to control
|
|
the state of built in bluetooth chip on tosa.
|
|
|
|
config TOSA_USE_EXT_KEYCODES
|
|
bool "Tosa keyboard: use extended keycodes"
|
|
depends on MACH_TOSA
|
|
default n
|
|
help
|
|
Say Y here to enable the tosa keyboard driver to generate extended
|
|
(>= 127) keycodes. Be aware, that they can't be correctly interpreted
|
|
by either console keyboard driver or by Kdrive keybd driver.
|
|
|
|
Say Y only if you know, what you are doing!
|
|
|
|
config MACH_ICONTROL
|
|
bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
|
|
select CPU_PXA320
|
|
select PXA3xx
|
|
|
|
config ARCH_PXA_ESERIES
|
|
bool "PXA based Toshiba e-series PDAs"
|
|
select FB_W100
|
|
select PXA25x
|
|
|
|
config MACH_E330
|
|
bool "Toshiba e330"
|
|
default y
|
|
depends on ARCH_PXA_ESERIES
|
|
help
|
|
Say Y here if you intend to run this kernel on a Toshiba
|
|
e330 family PDA.
|
|
|
|
config MACH_E350
|
|
bool "Toshiba e350"
|
|
default y
|
|
depends on ARCH_PXA_ESERIES
|
|
help
|
|
Say Y here if you intend to run this kernel on a Toshiba
|
|
e350 family PDA.
|
|
|
|
config MACH_E740
|
|
bool "Toshiba e740"
|
|
default y
|
|
depends on ARCH_PXA_ESERIES
|
|
help
|
|
Say Y here if you intend to run this kernel on a Toshiba
|
|
e740 family PDA.
|
|
|
|
config MACH_E750
|
|
bool "Toshiba e750"
|
|
default y
|
|
depends on ARCH_PXA_ESERIES
|
|
help
|
|
Say Y here if you intend to run this kernel on a Toshiba
|
|
e750 family PDA.
|
|
|
|
config MACH_E400
|
|
bool "Toshiba e400"
|
|
default y
|
|
depends on ARCH_PXA_ESERIES
|
|
help
|
|
Say Y here if you intend to run this kernel on a Toshiba
|
|
e400 family PDA.
|
|
|
|
config MACH_E800
|
|
bool "Toshiba e800"
|
|
default y
|
|
depends on ARCH_PXA_ESERIES
|
|
help
|
|
Say Y here if you intend to run this kernel on a Toshiba
|
|
e800 family PDA.
|
|
|
|
config MACH_ZIPIT2
|
|
bool "Zipit Z2 Handheld"
|
|
select PXA27x
|
|
endmenu
|
|
|
|
config PXA25x
|
|
bool
|
|
select CPU_XSCALE
|
|
help
|
|
Select code specific to PXA21x/25x/26x variants
|
|
|
|
config PXA27x
|
|
bool
|
|
select CPU_XSCALE
|
|
help
|
|
Select code specific to PXA27x variants
|
|
|
|
config CPU_PXA26x
|
|
bool
|
|
select PXA25x
|
|
help
|
|
Select code specific to PXA26x (codename Dalhart)
|
|
|
|
config PXA3xx
|
|
bool
|
|
select CPU_XSC3
|
|
help
|
|
Select code specific to PXA3xx variants
|
|
|
|
config CPU_PXA300
|
|
bool
|
|
select PXA3xx
|
|
help
|
|
PXA300 (codename Monahans-L)
|
|
|
|
config CPU_PXA310
|
|
bool
|
|
select CPU_PXA300
|
|
select PXA310_ULPI if USB_ULPI
|
|
help
|
|
PXA310 (codename Monahans-LV)
|
|
|
|
config CPU_PXA320
|
|
bool
|
|
select PXA3xx
|
|
help
|
|
PXA320 (codename Monahans-P)
|
|
|
|
config CPU_PXA930
|
|
bool
|
|
select PXA3xx
|
|
help
|
|
PXA930 (codename Tavor-P)
|
|
|
|
config CPU_PXA935
|
|
bool
|
|
select CPU_PXA930
|
|
help
|
|
PXA935 (codename Tavor-P65)
|
|
|
|
config PXA_SHARP_C7xx
|
|
bool
|
|
select SHARPSL_PM
|
|
help
|
|
Enable support for all Sharp C7xx models
|
|
|
|
config PXA_SHARP_Cxx00
|
|
bool
|
|
select SHARPSL_PM
|
|
help
|
|
Enable common support for Sharp Cxx00 models
|
|
|
|
config SHARPSL_PM
|
|
bool
|
|
select APM_EMULATION
|
|
select SHARPSL_PM_MAX1111
|
|
|
|
config SHARPSL_PM_MAX1111
|
|
bool
|
|
select HWMON
|
|
select SENSORS_MAX1111
|
|
select SPI
|
|
select SPI_MASTER
|
|
|
|
config PXA310_ULPI
|
|
bool
|
|
|
|
config PXA_SYSTEMS_CPLDS
|
|
tristate "Motherboard cplds"
|
|
default ARCH_LUBBOCK || MACH_MAINSTONE
|
|
help
|
|
This driver supports the Lubbock and Mainstone multifunction chip
|
|
found on the pxa25x development platform system (Lubbock) and pxa27x
|
|
development platform system (Mainstone). This IO board supports the
|
|
interrupts handling, ethernet controller, flash chips, etc ...
|
|
|
|
endif
|