mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 01:15:15 +07:00
55ad359225
In SRIOV, both the PF and the VF may attempt device recovery whenever they assume that the device is not functioning. When the PF driver resets the device, the VF should detect this and attempt to reinitialize itself. The VF must be able to reset itself under all circumstances, even if the PF is not responsive. The VF shall reset itself in the following cases: 1. Commands are not processed within reasonable time over the communication channel. This is done considering device state and the correct return code based on the command as was done in the native mode, done in the next patch. 2. The VF driver receives an internal error event reported by the PF on the communication channel. This occurs when the PF driver resets the device or when VF is out of sync with the PF. Add 'VF reset' capability, which allows the VF to reinitialize itself even when the PF is not responsive. As PF and VF may run their reset flow simulantanisly, there are several cases that are handled: - Prevent freeing VF resources upon FLR, when PF is in its unloading stage. - Prevent PF getting VF commands before it has finished initializing its resources. - Upon VF startup, check that comm-channel is online before sending commands to the PF and getting timed-out. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
328 lines
8.8 KiB
C
328 lines
8.8 KiB
C
/*
|
|
* Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
|
|
* Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
|
|
*
|
|
* This software is available to you under a choice of one of two
|
|
* licenses. You may choose to be licensed under the terms of the GNU
|
|
* General Public License (GPL) Version 2, available from the file
|
|
* COPYING in the main directory of this source tree, or the
|
|
* OpenIB.org BSD license below:
|
|
*
|
|
* Redistribution and use in source and binary forms, with or
|
|
* without modification, are permitted provided that the following
|
|
* conditions are met:
|
|
*
|
|
* - Redistributions of source code must retain the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer.
|
|
*
|
|
* - Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials
|
|
* provided with the distribution.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/workqueue.h>
|
|
#include <linux/module.h>
|
|
|
|
#include "mlx4.h"
|
|
|
|
enum {
|
|
MLX4_CATAS_POLL_INTERVAL = 5 * HZ,
|
|
};
|
|
|
|
|
|
|
|
int mlx4_internal_err_reset = 1;
|
|
module_param_named(internal_err_reset, mlx4_internal_err_reset, int, 0644);
|
|
MODULE_PARM_DESC(internal_err_reset,
|
|
"Reset device on internal errors if non-zero (default 1)");
|
|
|
|
static int read_vendor_id(struct mlx4_dev *dev)
|
|
{
|
|
u16 vendor_id = 0;
|
|
int ret;
|
|
|
|
ret = pci_read_config_word(dev->persist->pdev, 0, &vendor_id);
|
|
if (ret) {
|
|
mlx4_err(dev, "Failed to read vendor ID, ret=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (vendor_id == 0xffff) {
|
|
mlx4_err(dev, "PCI can't be accessed to read vendor id\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mlx4_reset_master(struct mlx4_dev *dev)
|
|
{
|
|
int err = 0;
|
|
|
|
if (mlx4_is_master(dev))
|
|
mlx4_report_internal_err_comm_event(dev);
|
|
|
|
if (!pci_channel_offline(dev->persist->pdev)) {
|
|
err = read_vendor_id(dev);
|
|
/* If PCI can't be accessed to read vendor ID we assume that its
|
|
* link was disabled and chip was already reset.
|
|
*/
|
|
if (err)
|
|
return 0;
|
|
|
|
err = mlx4_reset(dev);
|
|
if (err)
|
|
mlx4_err(dev, "Fail to reset HCA\n");
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mlx4_reset_slave(struct mlx4_dev *dev)
|
|
{
|
|
#define COM_CHAN_RST_REQ_OFFSET 0x10
|
|
#define COM_CHAN_RST_ACK_OFFSET 0x08
|
|
|
|
u32 comm_flags;
|
|
u32 rst_req;
|
|
u32 rst_ack;
|
|
unsigned long end;
|
|
struct mlx4_priv *priv = mlx4_priv(dev);
|
|
|
|
if (pci_channel_offline(dev->persist->pdev))
|
|
return 0;
|
|
|
|
comm_flags = swab32(readl((__iomem char *)priv->mfunc.comm +
|
|
MLX4_COMM_CHAN_FLAGS));
|
|
if (comm_flags == 0xffffffff) {
|
|
mlx4_err(dev, "VF reset is not needed\n");
|
|
return 0;
|
|
}
|
|
|
|
if (!(dev->caps.vf_caps & MLX4_VF_CAP_FLAG_RESET)) {
|
|
mlx4_err(dev, "VF reset is not supported\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
rst_req = (comm_flags & (u32)(1 << COM_CHAN_RST_REQ_OFFSET)) >>
|
|
COM_CHAN_RST_REQ_OFFSET;
|
|
rst_ack = (comm_flags & (u32)(1 << COM_CHAN_RST_ACK_OFFSET)) >>
|
|
COM_CHAN_RST_ACK_OFFSET;
|
|
if (rst_req != rst_ack) {
|
|
mlx4_err(dev, "Communication channel isn't sync, fail to send reset\n");
|
|
return -EIO;
|
|
}
|
|
|
|
rst_req ^= 1;
|
|
mlx4_warn(dev, "VF is sending reset request to Firmware\n");
|
|
comm_flags = rst_req << COM_CHAN_RST_REQ_OFFSET;
|
|
__raw_writel((__force u32)cpu_to_be32(comm_flags),
|
|
(__iomem char *)priv->mfunc.comm + MLX4_COMM_CHAN_FLAGS);
|
|
/* Make sure that our comm channel write doesn't
|
|
* get mixed in with writes from another CPU.
|
|
*/
|
|
mmiowb();
|
|
|
|
end = msecs_to_jiffies(MLX4_COMM_TIME) + jiffies;
|
|
while (time_before(jiffies, end)) {
|
|
comm_flags = swab32(readl((__iomem char *)priv->mfunc.comm +
|
|
MLX4_COMM_CHAN_FLAGS));
|
|
rst_ack = (comm_flags & (u32)(1 << COM_CHAN_RST_ACK_OFFSET)) >>
|
|
COM_CHAN_RST_ACK_OFFSET;
|
|
|
|
/* Reading rst_req again since the communication channel can
|
|
* be reset at any time by the PF and all its bits will be
|
|
* set to zero.
|
|
*/
|
|
rst_req = (comm_flags & (u32)(1 << COM_CHAN_RST_REQ_OFFSET)) >>
|
|
COM_CHAN_RST_REQ_OFFSET;
|
|
|
|
if (rst_ack == rst_req) {
|
|
mlx4_warn(dev, "VF Reset succeed\n");
|
|
return 0;
|
|
}
|
|
cond_resched();
|
|
}
|
|
mlx4_err(dev, "Fail to send reset over the communication channel\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int mlx4_comm_internal_err(u32 slave_read)
|
|
{
|
|
return (u32)COMM_CHAN_EVENT_INTERNAL_ERR ==
|
|
(slave_read & (u32)COMM_CHAN_EVENT_INTERNAL_ERR) ? 1 : 0;
|
|
}
|
|
|
|
void mlx4_enter_error_state(struct mlx4_dev_persistent *persist)
|
|
{
|
|
int err;
|
|
struct mlx4_dev *dev;
|
|
|
|
if (!mlx4_internal_err_reset)
|
|
return;
|
|
|
|
mutex_lock(&persist->device_state_mutex);
|
|
if (persist->state & MLX4_DEVICE_STATE_INTERNAL_ERROR)
|
|
goto out;
|
|
|
|
dev = persist->dev;
|
|
mlx4_err(dev, "device is going to be reset\n");
|
|
if (mlx4_is_slave(dev))
|
|
err = mlx4_reset_slave(dev);
|
|
else
|
|
err = mlx4_reset_master(dev);
|
|
BUG_ON(err != 0);
|
|
|
|
dev->persist->state |= MLX4_DEVICE_STATE_INTERNAL_ERROR;
|
|
mlx4_err(dev, "device was reset successfully\n");
|
|
mutex_unlock(&persist->device_state_mutex);
|
|
|
|
/* At that step HW was already reset, now notify clients */
|
|
mlx4_dispatch_event(dev, MLX4_DEV_EVENT_CATASTROPHIC_ERROR, 0);
|
|
mlx4_cmd_wake_completions(dev);
|
|
return;
|
|
|
|
out:
|
|
mutex_unlock(&persist->device_state_mutex);
|
|
}
|
|
|
|
static void mlx4_handle_error_state(struct mlx4_dev_persistent *persist)
|
|
{
|
|
int err = 0;
|
|
|
|
mlx4_enter_error_state(persist);
|
|
mutex_lock(&persist->interface_state_mutex);
|
|
if (persist->interface_state & MLX4_INTERFACE_STATE_UP &&
|
|
!(persist->interface_state & MLX4_INTERFACE_STATE_DELETION)) {
|
|
err = mlx4_restart_one(persist->pdev);
|
|
mlx4_info(persist->dev, "mlx4_restart_one was ended, ret=%d\n",
|
|
err);
|
|
}
|
|
mutex_unlock(&persist->interface_state_mutex);
|
|
}
|
|
|
|
static void dump_err_buf(struct mlx4_dev *dev)
|
|
{
|
|
struct mlx4_priv *priv = mlx4_priv(dev);
|
|
|
|
int i;
|
|
|
|
mlx4_err(dev, "Internal error detected:\n");
|
|
for (i = 0; i < priv->fw.catas_size; ++i)
|
|
mlx4_err(dev, " buf[%02x]: %08x\n",
|
|
i, swab32(readl(priv->catas_err.map + i)));
|
|
}
|
|
|
|
static void poll_catas(unsigned long dev_ptr)
|
|
{
|
|
struct mlx4_dev *dev = (struct mlx4_dev *) dev_ptr;
|
|
struct mlx4_priv *priv = mlx4_priv(dev);
|
|
u32 slave_read;
|
|
|
|
if (mlx4_is_slave(dev)) {
|
|
slave_read = swab32(readl(&priv->mfunc.comm->slave_read));
|
|
if (mlx4_comm_internal_err(slave_read)) {
|
|
mlx4_warn(dev, "Internal error detected on the communication channel\n");
|
|
goto internal_err;
|
|
}
|
|
} else if (readl(priv->catas_err.map)) {
|
|
dump_err_buf(dev);
|
|
goto internal_err;
|
|
}
|
|
|
|
if (dev->persist->state & MLX4_DEVICE_STATE_INTERNAL_ERROR) {
|
|
mlx4_warn(dev, "Internal error mark was detected on device\n");
|
|
goto internal_err;
|
|
}
|
|
|
|
mod_timer(&priv->catas_err.timer,
|
|
round_jiffies(jiffies + MLX4_CATAS_POLL_INTERVAL));
|
|
return;
|
|
|
|
internal_err:
|
|
if (mlx4_internal_err_reset)
|
|
queue_work(dev->persist->catas_wq, &dev->persist->catas_work);
|
|
}
|
|
|
|
static void catas_reset(struct work_struct *work)
|
|
{
|
|
struct mlx4_dev_persistent *persist =
|
|
container_of(work, struct mlx4_dev_persistent,
|
|
catas_work);
|
|
|
|
mlx4_handle_error_state(persist);
|
|
}
|
|
|
|
void mlx4_start_catas_poll(struct mlx4_dev *dev)
|
|
{
|
|
struct mlx4_priv *priv = mlx4_priv(dev);
|
|
phys_addr_t addr;
|
|
|
|
INIT_LIST_HEAD(&priv->catas_err.list);
|
|
init_timer(&priv->catas_err.timer);
|
|
priv->catas_err.map = NULL;
|
|
|
|
if (!mlx4_is_slave(dev)) {
|
|
addr = pci_resource_start(dev->persist->pdev,
|
|
priv->fw.catas_bar) +
|
|
priv->fw.catas_offset;
|
|
|
|
priv->catas_err.map = ioremap(addr, priv->fw.catas_size * 4);
|
|
if (!priv->catas_err.map) {
|
|
mlx4_warn(dev, "Failed to map internal error buffer at 0x%llx\n",
|
|
(unsigned long long)addr);
|
|
return;
|
|
}
|
|
}
|
|
|
|
priv->catas_err.timer.data = (unsigned long) dev;
|
|
priv->catas_err.timer.function = poll_catas;
|
|
priv->catas_err.timer.expires =
|
|
round_jiffies(jiffies + MLX4_CATAS_POLL_INTERVAL);
|
|
add_timer(&priv->catas_err.timer);
|
|
}
|
|
|
|
void mlx4_stop_catas_poll(struct mlx4_dev *dev)
|
|
{
|
|
struct mlx4_priv *priv = mlx4_priv(dev);
|
|
|
|
del_timer_sync(&priv->catas_err.timer);
|
|
|
|
if (priv->catas_err.map) {
|
|
iounmap(priv->catas_err.map);
|
|
priv->catas_err.map = NULL;
|
|
}
|
|
|
|
if (dev->persist->interface_state & MLX4_INTERFACE_STATE_DELETION)
|
|
flush_workqueue(dev->persist->catas_wq);
|
|
}
|
|
|
|
int mlx4_catas_init(struct mlx4_dev *dev)
|
|
{
|
|
INIT_WORK(&dev->persist->catas_work, catas_reset);
|
|
dev->persist->catas_wq = create_singlethread_workqueue("mlx4_health");
|
|
if (!dev->persist->catas_wq)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void mlx4_catas_end(struct mlx4_dev *dev)
|
|
{
|
|
if (dev->persist->catas_wq) {
|
|
destroy_workqueue(dev->persist->catas_wq);
|
|
dev->persist->catas_wq = NULL;
|
|
}
|
|
}
|