mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
a5f2246fb9
nand-controller.yaml replaced nand.txt however the references to it were
not updated. This change updates these references wherever it appears in
bindings documentation.
Fixes: 212e496935 ("dt-bindings: mtd: Add YAML schemas for the generic NAND options")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
55 lines
2.0 KiB
Plaintext
55 lines
2.0 KiB
Plaintext
* Denali NAND controller
|
|
|
|
Required properties:
|
|
- compatible : should be one of the following:
|
|
"altr,socfpga-denali-nand" - for Altera SOCFPGA
|
|
"socionext,uniphier-denali-nand-v5a" - for Socionext UniPhier (v5a)
|
|
"socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b)
|
|
- reg : should contain registers location and length for data and reg.
|
|
- reg-names: Should contain the reg names "nand_data" and "denali_reg"
|
|
- #address-cells: should be 1. The cell encodes the chip select connection.
|
|
- #size-cells : should be 0.
|
|
- interrupts : The interrupt number.
|
|
- clocks: should contain phandle of the controller core clock, the bus
|
|
interface clock, and the ECC circuit clock.
|
|
- clock-names: should contain "nand", "nand_x", "ecc"
|
|
|
|
Sub-nodes:
|
|
Sub-nodes represent available NAND chips.
|
|
|
|
Required properties:
|
|
- reg: should contain the bank ID of the controller to which each chip
|
|
select is connected.
|
|
|
|
Optional properties:
|
|
- nand-ecc-step-size: see nand-controller.yaml for details.
|
|
If present, the value must be
|
|
512 for "altr,socfpga-denali-nand"
|
|
1024 for "socionext,uniphier-denali-nand-v5a"
|
|
1024 for "socionext,uniphier-denali-nand-v5b"
|
|
- nand-ecc-strength: see nand-controller.yaml for details. Valid values are:
|
|
8, 15 for "altr,socfpga-denali-nand"
|
|
8, 16, 24 for "socionext,uniphier-denali-nand-v5a"
|
|
8, 16 for "socionext,uniphier-denali-nand-v5b"
|
|
- nand-ecc-maximize: see nand-controller.yaml for details
|
|
|
|
The chip nodes may optionally contain sub-nodes describing partitions of the
|
|
address space. See partition.txt for more detail.
|
|
|
|
Examples:
|
|
|
|
nand: nand@ff900000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "altr,socfpga-denali-nand";
|
|
reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
|
|
reg-names = "nand_data", "denali_reg";
|
|
clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
|
|
clock-names = "nand", "nand_x", "ecc";
|
|
interrupts = <0 144 4>;
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
}
|
|
};
|