mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-03 00:56:40 +07:00
549f3ae1be
This patch adds necessary DT nodes for pcie controllers and miphys for SPEAr13xx SoCs. SPEAr1310 has 3 PCIe ports and SPEAr1340 has 1, which are multiplexed with ahci/sata pins. By default evaluation board of both controller works in ahci mode. Because of this, these nodes are marked "disabled" by default. In order to use pcie controller on evaluation boards do necessary modifications on board and enable (By replacing "disabled" with "okay") pcie and miphy from respective 'evb' dtsi file. Phy specific initialization was previously done from spear1340.c, which isn't required anymore as we have separate drivers for it. Remove it. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Mohit Kumar <mohit.kumar@st.com> [viresh: fixed logs/cclist/checkpatch warnings, clubbed multiple patches into one] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
317 lines
7.6 KiB
Plaintext
317 lines
7.6 KiB
Plaintext
/*
|
|
* DTS file for all SPEAr1310 SoCs
|
|
*
|
|
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/include/ "spear13xx.dtsi"
|
|
|
|
/ {
|
|
compatible = "st,spear1310";
|
|
|
|
ahb {
|
|
spics: spics@e0700000{
|
|
compatible = "st,spear-spics-gpio";
|
|
reg = <0xe0700000 0x1000>;
|
|
st-spics,peripcfg-reg = <0x3b0>;
|
|
st-spics,sw-enable-bit = <12>;
|
|
st-spics,cs-value-bit = <11>;
|
|
st-spics,cs-enable-mask = <3>;
|
|
st-spics,cs-enable-shift = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
miphy0: miphy@eb800000 {
|
|
compatible = "st,spear1310-miphy";
|
|
reg = <0xeb800000 0x4000>;
|
|
misc = <&misc>;
|
|
phy-id = <0>;
|
|
#phy-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
miphy1: miphy@eb804000 {
|
|
compatible = "st,spear1310-miphy";
|
|
reg = <0xeb804000 0x4000>;
|
|
misc = <&misc>;
|
|
phy-id = <1>;
|
|
#phy-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
miphy2: miphy@eb808000 {
|
|
compatible = "st,spear1310-miphy";
|
|
reg = <0xeb808000 0x4000>;
|
|
misc = <&misc>;
|
|
phy-id = <2>;
|
|
#phy-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ahci0: ahci@b1000000 {
|
|
compatible = "snps,spear-ahci";
|
|
reg = <0xb1000000 0x10000>;
|
|
interrupts = <0 68 0x4>;
|
|
phys = <&miphy0 0>;
|
|
phy-names = "sata-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
ahci1: ahci@b1800000 {
|
|
compatible = "snps,spear-ahci";
|
|
reg = <0xb1800000 0x10000>;
|
|
interrupts = <0 69 0x4>;
|
|
phys = <&miphy1 0>;
|
|
phy-names = "sata-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
ahci2: ahci@b4000000 {
|
|
compatible = "snps,spear-ahci";
|
|
reg = <0xb4000000 0x10000>;
|
|
interrupts = <0 70 0x4>;
|
|
phys = <&miphy2 0>;
|
|
phy-names = "sata-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie0: pcie@b1000000 {
|
|
compatible = "st,spear1340-pcie", "snps,dw-pcie";
|
|
reg = <0xb1000000 0x4000>;
|
|
interrupts = <0 68 0x4>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0x0 0 &gic 0 68 0x4>;
|
|
num-lanes = <1>;
|
|
phys = <&miphy0 1>;
|
|
phy-names = "pcie-phy";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000 /* configuration space */
|
|
0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
|
|
0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie1: pcie@b1800000 {
|
|
compatible = "st,spear1340-pcie", "snps,dw-pcie";
|
|
reg = <0xb1800000 0x4000>;
|
|
interrupts = <0 69 0x4>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0x0 0 &gic 0 69 0x4>;
|
|
num-lanes = <1>;
|
|
phys = <&miphy1 1>;
|
|
phy-names = "pcie-phy";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x00000800 0 0x90000000 0x90000000 0 0x00020000 /* configuration space */
|
|
0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */
|
|
0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie2: pcie@b4000000 {
|
|
compatible = "st,spear1340-pcie", "snps,dw-pcie";
|
|
reg = <0xb4000000 0x4000>;
|
|
interrupts = <0 70 0x4>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0x0 0 &gic 0 70 0x4>;
|
|
num-lanes = <1>;
|
|
phys = <&miphy2 1>;
|
|
phy-names = "pcie-phy";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x00000800 0 0xc0000000 0xc0000000 0 0x00020000 /* configuration space */
|
|
0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */
|
|
0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac1: eth@5c400000 {
|
|
compatible = "st,spear600-gmac";
|
|
reg = <0x5c400000 0x8000>;
|
|
interrupts = <0 95 0x4>;
|
|
interrupt-names = "macirq";
|
|
phy-mode = "mii";
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac2: eth@5c500000 {
|
|
compatible = "st,spear600-gmac";
|
|
reg = <0x5c500000 0x8000>;
|
|
interrupts = <0 96 0x4>;
|
|
interrupt-names = "macirq";
|
|
phy-mode = "mii";
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac3: eth@5c600000 {
|
|
compatible = "st,spear600-gmac";
|
|
reg = <0x5c600000 0x8000>;
|
|
interrupts = <0 97 0x4>;
|
|
interrupt-names = "macirq";
|
|
phy-mode = "rmii";
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac4: eth@5c700000 {
|
|
compatible = "st,spear600-gmac";
|
|
reg = <0x5c700000 0x8000>;
|
|
interrupts = <0 98 0x4>;
|
|
interrupt-names = "macirq";
|
|
phy-mode = "rgmii";
|
|
status = "disabled";
|
|
};
|
|
|
|
pinmux: pinmux@e0700000 {
|
|
compatible = "st,spear1310-pinmux";
|
|
reg = <0xe0700000 0x1000>;
|
|
#gpio-range-cells = <3>;
|
|
};
|
|
|
|
apb {
|
|
i2c1: i2c@5cd00000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0x5cd00000 0x1000>;
|
|
interrupts = <0 87 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@5ce00000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0x5ce00000 0x1000>;
|
|
interrupts = <0 88 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@5cf00000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0x5cf00000 0x1000>;
|
|
interrupts = <0 89 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@5d000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0x5d000000 0x1000>;
|
|
interrupts = <0 90 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@5d100000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0x5d100000 0x1000>;
|
|
interrupts = <0 91 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c6: i2c@5d200000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0x5d200000 0x1000>;
|
|
interrupts = <0 92 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c7: i2c@5d300000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0x5d300000 0x1000>;
|
|
interrupts = <0 93 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@5d400000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x5d400000 0x1000>;
|
|
interrupts = <0 99 0x4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@5c800000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x5c800000 0x1000>;
|
|
interrupts = <0 82 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@5c900000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x5c900000 0x1000>;
|
|
interrupts = <0 83 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@5ca00000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x5ca00000 0x1000>;
|
|
interrupts = <0 84 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@5cb00000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x5cb00000 0x1000>;
|
|
interrupts = <0 85 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@5cc00000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x5cc00000 0x1000>;
|
|
interrupts = <0 86 0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
thermal@e07008c4 {
|
|
st,thermal-flags = <0x7000>;
|
|
};
|
|
|
|
gpiopinctrl: gpio@d8400000 {
|
|
compatible = "st,spear-plgpio";
|
|
reg = <0xd8400000 0x1000>;
|
|
interrupts = <0 100 0x4>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pinmux 0 0 246>;
|
|
status = "disabled";
|
|
|
|
st-plgpio,ngpio = <246>;
|
|
st-plgpio,enb-reg = <0xd0>;
|
|
st-plgpio,wdata-reg = <0x90>;
|
|
st-plgpio,dir-reg = <0xb0>;
|
|
st-plgpio,ie-reg = <0x30>;
|
|
st-plgpio,rdata-reg = <0x70>;
|
|
st-plgpio,mis-reg = <0x10>;
|
|
st-plgpio,eit-reg = <0x50>;
|
|
};
|
|
};
|
|
};
|
|
};
|