linux_dsm_epyc7002/drivers/infiniband/hw/hfi1/platform.c
Easwar Hariharan b5e7101954 IB/hfi1: Reset QSFP on every run through channel tuning
Active QSFP cables were reset only every alternate iteration of the
channel tuning algorithm instead of every iteration due to incorrect
reset of the flag that controlled QSFP reset, resulting in using stale
QSFP status in the channel tuning algorithm.

Fixes: 8ebd4cf185 ("Add active and optical cable support")
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02 16:00:58 -04:00

900 lines
24 KiB
C

/*
* Copyright(c) 2015, 2016 Intel Corporation.
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* BSD LICENSE
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include "hfi.h"
#include "efivar.h"
void get_platform_config(struct hfi1_devdata *dd)
{
int ret = 0;
unsigned long size = 0;
u8 *temp_platform_config = NULL;
ret = read_hfi1_efi_var(dd, "configuration", &size,
(void **)&temp_platform_config);
if (ret) {
dd_dev_info(dd,
"%s: Failed to get platform config from UEFI, falling back to request firmware\n",
__func__);
/* fall back to request firmware */
platform_config_load = 1;
goto bail;
}
dd->platform_config.data = temp_platform_config;
dd->platform_config.size = size;
bail:
/* exit */;
}
void free_platform_config(struct hfi1_devdata *dd)
{
if (!platform_config_load) {
/*
* was loaded from EFI, release memory
* allocated by read_efi_var
*/
kfree(dd->platform_config.data);
}
/*
* else do nothing, dispose_firmware will release
* struct firmware platform_config on driver exit
*/
}
void get_port_type(struct hfi1_pportdata *ppd)
{
int ret;
ret = get_platform_config_field(ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_PORT_TYPE, &ppd->port_type,
4);
if (ret)
ppd->port_type = PORT_TYPE_UNKNOWN;
}
int set_qsfp_tx(struct hfi1_pportdata *ppd, int on)
{
u8 tx_ctrl_byte = on ? 0x0 : 0xF;
int ret = 0;
ret = qsfp_write(ppd, ppd->dd->hfi1_id, QSFP_TX_CTRL_BYTE_OFFS,
&tx_ctrl_byte, 1);
/* we expected 1, so consider 0 an error */
if (ret == 0)
ret = -EIO;
else if (ret == 1)
ret = 0;
return ret;
}
static int qual_power(struct hfi1_pportdata *ppd)
{
u32 cable_power_class = 0, power_class_max = 0;
u8 *cache = ppd->qsfp_info.cache;
int ret = 0;
ret = get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_SYSTEM_TABLE, 0,
SYSTEM_TABLE_QSFP_POWER_CLASS_MAX, &power_class_max, 4);
if (ret)
return ret;
cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]);
if (cable_power_class > power_class_max)
ppd->offline_disabled_reason =
HFI1_ODR_MASK(OPA_LINKDOWN_REASON_POWER_POLICY);
if (ppd->offline_disabled_reason ==
HFI1_ODR_MASK(OPA_LINKDOWN_REASON_POWER_POLICY)) {
dd_dev_info(
ppd->dd,
"%s: Port disabled due to system power restrictions\n",
__func__);
ret = -EPERM;
}
return ret;
}
static int qual_bitrate(struct hfi1_pportdata *ppd)
{
u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled;
u8 *cache = ppd->qsfp_info.cache;
if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G) &&
cache[QSFP_NOM_BIT_RATE_250_OFFS] < 0x64)
ppd->offline_disabled_reason =
HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY);
if ((lss & OPA_LINK_SPEED_12_5G) && (lse & OPA_LINK_SPEED_12_5G) &&
cache[QSFP_NOM_BIT_RATE_100_OFFS] < 0x7D)
ppd->offline_disabled_reason =
HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY);
if (ppd->offline_disabled_reason ==
HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY)) {
dd_dev_info(
ppd->dd,
"%s: Cable failed bitrate check, disabling port\n",
__func__);
return -EPERM;
}
return 0;
}
static int set_qsfp_high_power(struct hfi1_pportdata *ppd)
{
u8 cable_power_class = 0, power_ctrl_byte = 0;
u8 *cache = ppd->qsfp_info.cache;
int ret;
cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]);
if (cable_power_class > QSFP_POWER_CLASS_1) {
power_ctrl_byte = cache[QSFP_PWR_CTRL_BYTE_OFFS];
power_ctrl_byte |= 1;
power_ctrl_byte &= ~(0x2);
ret = qsfp_write(ppd, ppd->dd->hfi1_id,
QSFP_PWR_CTRL_BYTE_OFFS,
&power_ctrl_byte, 1);
if (ret != 1)
return -EIO;
if (cable_power_class > QSFP_POWER_CLASS_4) {
power_ctrl_byte |= (1 << 2);
ret = qsfp_write(ppd, ppd->dd->hfi1_id,
QSFP_PWR_CTRL_BYTE_OFFS,
&power_ctrl_byte, 1);
if (ret != 1)
return -EIO;
}
/* SFF 8679 rev 1.7 LPMode Deassert time */
msleep(300);
}
return 0;
}
static void apply_rx_cdr(struct hfi1_pportdata *ppd,
u32 rx_preset_index,
u8 *cdr_ctrl_byte)
{
u32 rx_preset;
u8 *cache = ppd->qsfp_info.cache;
int cable_power_class;
if (!((cache[QSFP_MOD_PWR_OFFS] & 0x4) &&
(cache[QSFP_CDR_INFO_OFFS] & 0x40)))
return;
/* RX CDR present, bypass supported */
cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]);
if (cable_power_class <= QSFP_POWER_CLASS_3) {
/* Power class <= 3, ignore config & turn RX CDR on */
*cdr_ctrl_byte |= 0xF;
return;
}
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE,
rx_preset_index, RX_PRESET_TABLE_QSFP_RX_CDR_APPLY,
&rx_preset, 4);
if (!rx_preset) {
dd_dev_info(
ppd->dd,
"%s: RX_CDR_APPLY is set to disabled\n",
__func__);
return;
}
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE,
rx_preset_index, RX_PRESET_TABLE_QSFP_RX_CDR,
&rx_preset, 4);
/* Expand cdr setting to all 4 lanes */
rx_preset = (rx_preset | (rx_preset << 1) |
(rx_preset << 2) | (rx_preset << 3));
if (rx_preset) {
*cdr_ctrl_byte |= rx_preset;
} else {
*cdr_ctrl_byte &= rx_preset;
/* Preserve current TX CDR status */
*cdr_ctrl_byte |= (cache[QSFP_CDR_CTRL_BYTE_OFFS] & 0xF0);
}
}
static void apply_tx_cdr(struct hfi1_pportdata *ppd,
u32 tx_preset_index,
u8 *cdr_ctrl_byte)
{
u32 tx_preset;
u8 *cache = ppd->qsfp_info.cache;
int cable_power_class;
if (!((cache[QSFP_MOD_PWR_OFFS] & 0x8) &&
(cache[QSFP_CDR_INFO_OFFS] & 0x80)))
return;
/* TX CDR present, bypass supported */
cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]);
if (cable_power_class <= QSFP_POWER_CLASS_3) {
/* Power class <= 3, ignore config & turn TX CDR on */
*cdr_ctrl_byte |= 0xF0;
return;
}
get_platform_config_field(
ppd->dd,
PLATFORM_CONFIG_TX_PRESET_TABLE, tx_preset_index,
TX_PRESET_TABLE_QSFP_TX_CDR_APPLY, &tx_preset, 4);
if (!tx_preset) {
dd_dev_info(
ppd->dd,
"%s: TX_CDR_APPLY is set to disabled\n",
__func__);
return;
}
get_platform_config_field(
ppd->dd,
PLATFORM_CONFIG_TX_PRESET_TABLE,
tx_preset_index,
TX_PRESET_TABLE_QSFP_TX_CDR, &tx_preset, 4);
/* Expand cdr setting to all 4 lanes */
tx_preset = (tx_preset | (tx_preset << 1) |
(tx_preset << 2) | (tx_preset << 3));
if (tx_preset)
*cdr_ctrl_byte |= (tx_preset << 4);
else
/* Preserve current/determined RX CDR status */
*cdr_ctrl_byte &= ((tx_preset << 4) | 0xF);
}
static void apply_cdr_settings(
struct hfi1_pportdata *ppd, u32 rx_preset_index,
u32 tx_preset_index)
{
u8 *cache = ppd->qsfp_info.cache;
u8 cdr_ctrl_byte = cache[QSFP_CDR_CTRL_BYTE_OFFS];
apply_rx_cdr(ppd, rx_preset_index, &cdr_ctrl_byte);
apply_tx_cdr(ppd, tx_preset_index, &cdr_ctrl_byte);
qsfp_write(ppd, ppd->dd->hfi1_id, QSFP_CDR_CTRL_BYTE_OFFS,
&cdr_ctrl_byte, 1);
}
static void apply_tx_eq_auto(struct hfi1_pportdata *ppd)
{
u8 *cache = ppd->qsfp_info.cache;
u8 tx_eq;
if (!(cache[QSFP_EQ_INFO_OFFS] & 0x8))
return;
/* Disable adaptive TX EQ if present */
tx_eq = cache[(128 * 3) + 241];
tx_eq &= 0xF0;
qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 241, &tx_eq, 1);
}
static void apply_tx_eq_prog(struct hfi1_pportdata *ppd, u32 tx_preset_index)
{
u8 *cache = ppd->qsfp_info.cache;
u32 tx_preset;
u8 tx_eq;
if (!(cache[QSFP_EQ_INFO_OFFS] & 0x4))
return;
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE,
tx_preset_index, TX_PRESET_TABLE_QSFP_TX_EQ_APPLY,
&tx_preset, 4);
if (!tx_preset) {
dd_dev_info(
ppd->dd,
"%s: TX_EQ_APPLY is set to disabled\n",
__func__);
return;
}
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE,
tx_preset_index, TX_PRESET_TABLE_QSFP_TX_EQ,
&tx_preset, 4);
if (((cache[(128 * 3) + 224] & 0xF0) >> 4) < tx_preset) {
dd_dev_info(
ppd->dd,
"%s: TX EQ %x unsupported\n",
__func__, tx_preset);
dd_dev_info(
ppd->dd,
"%s: Applying EQ %x\n",
__func__, cache[608] & 0xF0);
tx_preset = (cache[608] & 0xF0) >> 4;
}
tx_eq = tx_preset | (tx_preset << 4);
qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 234, &tx_eq, 1);
qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 235, &tx_eq, 1);
}
static void apply_rx_eq_emp(struct hfi1_pportdata *ppd, u32 rx_preset_index)
{
u32 rx_preset;
u8 rx_eq, *cache = ppd->qsfp_info.cache;
if (!(cache[QSFP_EQ_INFO_OFFS] & 0x2))
return;
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE,
rx_preset_index, RX_PRESET_TABLE_QSFP_RX_EMP_APPLY,
&rx_preset, 4);
if (!rx_preset) {
dd_dev_info(
ppd->dd,
"%s: RX_EMP_APPLY is set to disabled\n",
__func__);
return;
}
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE,
rx_preset_index, RX_PRESET_TABLE_QSFP_RX_EMP,
&rx_preset, 4);
if ((cache[(128 * 3) + 224] & 0xF) < rx_preset) {
dd_dev_info(
ppd->dd,
"%s: Requested RX EMP %x\n",
__func__, rx_preset);
dd_dev_info(
ppd->dd,
"%s: Applying supported EMP %x\n",
__func__, cache[608] & 0xF);
rx_preset = cache[608] & 0xF;
}
rx_eq = rx_preset | (rx_preset << 4);
qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 236, &rx_eq, 1);
qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 237, &rx_eq, 1);
}
static void apply_eq_settings(struct hfi1_pportdata *ppd,
u32 rx_preset_index, u32 tx_preset_index)
{
u8 *cache = ppd->qsfp_info.cache;
/* no point going on w/o a page 3 */
if (cache[2] & 4) {
dd_dev_info(ppd->dd,
"%s: Upper page 03 not present\n",
__func__);
return;
}
apply_tx_eq_auto(ppd);
apply_tx_eq_prog(ppd, tx_preset_index);
apply_rx_eq_emp(ppd, rx_preset_index);
}
static void apply_rx_amplitude_settings(
struct hfi1_pportdata *ppd, u32 rx_preset_index,
u32 tx_preset_index)
{
u32 rx_preset;
u8 rx_amp = 0, i = 0, preferred = 0, *cache = ppd->qsfp_info.cache;
/* no point going on w/o a page 3 */
if (cache[2] & 4) {
dd_dev_info(ppd->dd,
"%s: Upper page 03 not present\n",
__func__);
return;
}
if (!(cache[QSFP_EQ_INFO_OFFS] & 0x1)) {
dd_dev_info(ppd->dd,
"%s: RX_AMP_APPLY is set to disabled\n",
__func__);
return;
}
get_platform_config_field(ppd->dd,
PLATFORM_CONFIG_RX_PRESET_TABLE,
rx_preset_index,
RX_PRESET_TABLE_QSFP_RX_AMP_APPLY,
&rx_preset, 4);
if (!rx_preset) {
dd_dev_info(ppd->dd,
"%s: RX_AMP_APPLY is set to disabled\n",
__func__);
return;
}
get_platform_config_field(ppd->dd,
PLATFORM_CONFIG_RX_PRESET_TABLE,
rx_preset_index,
RX_PRESET_TABLE_QSFP_RX_AMP,
&rx_preset, 4);
dd_dev_info(ppd->dd,
"%s: Requested RX AMP %x\n",
__func__,
rx_preset);
for (i = 0; i < 4; i++) {
if (cache[(128 * 3) + 225] & (1 << i)) {
preferred = i;
if (preferred == rx_preset)
break;
}
}
/*
* Verify that preferred RX amplitude is not just a
* fall through of the default
*/
if (!preferred && !(cache[(128 * 3) + 225] & 0x1)) {
dd_dev_info(ppd->dd, "No supported RX AMP, not applying\n");
return;
}
dd_dev_info(ppd->dd,
"%s: Applying RX AMP %x\n", __func__, preferred);
rx_amp = preferred | (preferred << 4);
qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 238, &rx_amp, 1);
qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 239, &rx_amp, 1);
}
#define OPA_INVALID_INDEX 0xFFF
static void apply_tx_lanes(struct hfi1_pportdata *ppd, u8 field_id,
u32 config_data, const char *message)
{
u8 i;
int ret = HCMD_SUCCESS;
for (i = 0; i < 4; i++) {
ret = load_8051_config(ppd->dd, field_id, i, config_data);
if (ret != HCMD_SUCCESS) {
dd_dev_err(
ppd->dd,
"%s: %s for lane %u failed\n",
message, __func__, i);
}
}
}
static void apply_tunings(
struct hfi1_pportdata *ppd, u32 tx_preset_index,
u8 tuning_method, u32 total_atten, u8 limiting_active)
{
int ret = 0;
u32 config_data = 0, tx_preset = 0;
u8 precur = 0, attn = 0, postcur = 0, external_device_config = 0;
u8 *cache = ppd->qsfp_info.cache;
/* Pass tuning method to 8051 */
read_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG,
&config_data);
config_data &= ~(0xff << TUNING_METHOD_SHIFT);
config_data |= ((u32)tuning_method << TUNING_METHOD_SHIFT);
ret = load_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG,
config_data);
if (ret != HCMD_SUCCESS)
dd_dev_err(ppd->dd, "%s: Failed to set tuning method\n",
__func__);
/* Set same channel loss for both TX and RX */
config_data = 0 | (total_atten << 16) | (total_atten << 24);
apply_tx_lanes(ppd, CHANNEL_LOSS_SETTINGS, config_data,
"Setting channel loss");
/* Inform 8051 of cable capabilities */
if (ppd->qsfp_info.cache_valid) {
external_device_config =
((cache[QSFP_MOD_PWR_OFFS] & 0x4) << 3) |
((cache[QSFP_MOD_PWR_OFFS] & 0x8) << 2) |
((cache[QSFP_EQ_INFO_OFFS] & 0x2) << 1) |
(cache[QSFP_EQ_INFO_OFFS] & 0x4);
ret = read_8051_config(ppd->dd, DC_HOST_COMM_SETTINGS,
GENERAL_CONFIG, &config_data);
/* Clear, then set the external device config field */
config_data &= ~(u32)0xFF;
config_data |= external_device_config;
ret = load_8051_config(ppd->dd, DC_HOST_COMM_SETTINGS,
GENERAL_CONFIG, config_data);
if (ret != HCMD_SUCCESS)
dd_dev_info(ppd->dd,
"%s: Failed set ext device config params\n",
__func__);
}
if (tx_preset_index == OPA_INVALID_INDEX) {
if (ppd->port_type == PORT_TYPE_QSFP && limiting_active)
dd_dev_info(ppd->dd, "%s: Invalid Tx preset index\n",
__func__);
return;
}
/* Following for limiting active channels only */
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, tx_preset_index,
TX_PRESET_TABLE_PRECUR, &tx_preset, 4);
precur = tx_preset;
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE,
tx_preset_index, TX_PRESET_TABLE_ATTN, &tx_preset, 4);
attn = tx_preset;
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE,
tx_preset_index, TX_PRESET_TABLE_POSTCUR, &tx_preset, 4);
postcur = tx_preset;
config_data = precur | (attn << 8) | (postcur << 16);
apply_tx_lanes(ppd, TX_EQ_SETTINGS, config_data,
"Applying TX settings");
}
/* Must be holding the QSFP i2c resource */
static int tune_active_qsfp(struct hfi1_pportdata *ppd, u32 *ptr_tx_preset,
u32 *ptr_rx_preset, u32 *ptr_total_atten)
{
int ret;
u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled;
u8 *cache = ppd->qsfp_info.cache;
ppd->qsfp_info.limiting_active = 1;
ret = set_qsfp_tx(ppd, 0);
if (ret)
return ret;
ret = qual_power(ppd);
if (ret)
return ret;
ret = qual_bitrate(ppd);
if (ret)
return ret;
/*
* We'll change the QSFP memory contents from here on out, thus we set a
* flag here to remind ourselves to reset the QSFP module. This prevents
* reuse of stale settings established in our previous pass through.
*/
if (ppd->qsfp_info.reset_needed) {
reset_qsfp(ppd);
refresh_qsfp_cache(ppd, &ppd->qsfp_info);
} else {
ppd->qsfp_info.reset_needed = 1;
}
ret = set_qsfp_high_power(ppd);
if (ret)
return ret;
if (cache[QSFP_EQ_INFO_OFFS] & 0x4) {
ret = get_platform_config_field(
ppd->dd,
PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_TX_PRESET_IDX_ACTIVE_EQ,
ptr_tx_preset, 4);
if (ret) {
*ptr_tx_preset = OPA_INVALID_INDEX;
return ret;
}
} else {
ret = get_platform_config_field(
ppd->dd,
PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_TX_PRESET_IDX_ACTIVE_NO_EQ,
ptr_tx_preset, 4);
if (ret) {
*ptr_tx_preset = OPA_INVALID_INDEX;
return ret;
}
}
ret = get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_RX_PRESET_IDX, ptr_rx_preset, 4);
if (ret) {
*ptr_rx_preset = OPA_INVALID_INDEX;
return ret;
}
if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G))
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_LOCAL_ATTEN_25G, ptr_total_atten, 4);
else if ((lss & OPA_LINK_SPEED_12_5G) && (lse & OPA_LINK_SPEED_12_5G))
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_LOCAL_ATTEN_12G, ptr_total_atten, 4);
apply_cdr_settings(ppd, *ptr_rx_preset, *ptr_tx_preset);
apply_eq_settings(ppd, *ptr_rx_preset, *ptr_tx_preset);
apply_rx_amplitude_settings(ppd, *ptr_rx_preset, *ptr_tx_preset);
ret = set_qsfp_tx(ppd, 1);
return ret;
}
static int tune_qsfp(struct hfi1_pportdata *ppd,
u32 *ptr_tx_preset, u32 *ptr_rx_preset,
u8 *ptr_tuning_method, u32 *ptr_total_atten)
{
u32 cable_atten = 0, remote_atten = 0, platform_atten = 0;
u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled;
int ret = 0;
u8 *cache = ppd->qsfp_info.cache;
switch ((cache[QSFP_MOD_TECH_OFFS] & 0xF0) >> 4) {
case 0xA ... 0xB:
ret = get_platform_config_field(
ppd->dd,
PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_LOCAL_ATTEN_25G,
&platform_atten, 4);
if (ret)
return ret;
if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G))
cable_atten = cache[QSFP_CU_ATTEN_12G_OFFS];
else if ((lss & OPA_LINK_SPEED_12_5G) &&
(lse & OPA_LINK_SPEED_12_5G))
cable_atten = cache[QSFP_CU_ATTEN_7G_OFFS];
/* Fallback to configured attenuation if cable memory is bad */
if (cable_atten == 0 || cable_atten > 36) {
ret = get_platform_config_field(
ppd->dd,
PLATFORM_CONFIG_SYSTEM_TABLE, 0,
SYSTEM_TABLE_QSFP_ATTENUATION_DEFAULT_25G,
&cable_atten, 4);
if (ret)
return ret;
}
ret = get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_REMOTE_ATTEN_25G, &remote_atten, 4);
if (ret)
return ret;
*ptr_total_atten = platform_atten + cable_atten + remote_atten;
*ptr_tuning_method = OPA_PASSIVE_TUNING;
break;
case 0x0 ... 0x9: /* fallthrough */
case 0xC: /* fallthrough */
case 0xE:
ret = tune_active_qsfp(ppd, ptr_tx_preset, ptr_rx_preset,
ptr_total_atten);
if (ret)
return ret;
*ptr_tuning_method = OPA_ACTIVE_TUNING;
break;
case 0xD: /* fallthrough */
case 0xF:
default:
dd_dev_info(ppd->dd, "%s: Unknown/unsupported cable\n",
__func__);
break;
}
return ret;
}
/*
* This function communicates its success or failure via ppd->driver_link_ready
* Thus, it depends on its association with start_link(...) which checks
* driver_link_ready before proceeding with the link negotiation and
* initialization process.
*/
void tune_serdes(struct hfi1_pportdata *ppd)
{
int ret = 0;
u32 total_atten = 0;
u32 remote_atten = 0, platform_atten = 0;
u32 rx_preset_index, tx_preset_index;
u8 tuning_method = 0, limiting_active = 0;
struct hfi1_devdata *dd = ppd->dd;
rx_preset_index = OPA_INVALID_INDEX;
tx_preset_index = OPA_INVALID_INDEX;
/* the link defaults to enabled */
ppd->link_enabled = 1;
/* the driver link ready state defaults to not ready */
ppd->driver_link_ready = 0;
ppd->offline_disabled_reason = HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NONE);
/* Skip the tuning for testing (loopback != none) and simulations */
if (loopback != LOOPBACK_NONE ||
ppd->dd->icode == ICODE_FUNCTIONAL_SIMULATOR) {
ppd->driver_link_ready = 1;
return;
}
switch (ppd->port_type) {
case PORT_TYPE_DISCONNECTED:
ppd->offline_disabled_reason =
HFI1_ODR_MASK(OPA_LINKDOWN_REASON_DISCONNECTED);
dd_dev_info(dd, "%s: Port disconnected, disabling port\n",
__func__);
goto bail;
case PORT_TYPE_FIXED:
/* platform_atten, remote_atten pre-zeroed to catch error */
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_LOCAL_ATTEN_25G, &platform_atten, 4);
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_REMOTE_ATTEN_25G, &remote_atten, 4);
total_atten = platform_atten + remote_atten;
tuning_method = OPA_PASSIVE_TUNING;
break;
case PORT_TYPE_VARIABLE:
if (qsfp_mod_present(ppd)) {
/*
* platform_atten, remote_atten pre-zeroed to
* catch error
*/
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_LOCAL_ATTEN_25G,
&platform_atten, 4);
get_platform_config_field(
ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0,
PORT_TABLE_REMOTE_ATTEN_25G,
&remote_atten, 4);
total_atten = platform_atten + remote_atten;
tuning_method = OPA_PASSIVE_TUNING;
} else {
ppd->offline_disabled_reason =
HFI1_ODR_MASK(OPA_LINKDOWN_REASON_CHASSIS_CONFIG);
goto bail;
}
break;
case PORT_TYPE_QSFP:
if (qsfp_mod_present(ppd)) {
ret = acquire_chip_resource(ppd->dd,
qsfp_resource(ppd->dd),
QSFP_WAIT);
if (ret) {
dd_dev_err(ppd->dd, "%s: hfi%d: cannot lock i2c chain\n",
__func__, (int)ppd->dd->hfi1_id);
goto bail;
}
refresh_qsfp_cache(ppd, &ppd->qsfp_info);
if (ppd->qsfp_info.cache_valid) {
ret = tune_qsfp(ppd,
&tx_preset_index,
&rx_preset_index,
&tuning_method,
&total_atten);
/*
* We may have modified the QSFP memory, so
* update the cache to reflect the changes
*/
refresh_qsfp_cache(ppd, &ppd->qsfp_info);
limiting_active =
ppd->qsfp_info.limiting_active;
} else {
dd_dev_err(dd,
"%s: Reading QSFP memory failed\n",
__func__);
ret = -EINVAL; /* a fail indication */
}
release_chip_resource(ppd->dd, qsfp_resource(ppd->dd));
if (ret)
goto bail;
} else {
ppd->offline_disabled_reason =
HFI1_ODR_MASK(
OPA_LINKDOWN_REASON_LOCAL_MEDIA_NOT_INSTALLED);
goto bail;
}
break;
default:
dd_dev_info(ppd->dd, "%s: Unknown port type\n", __func__);
ppd->port_type = PORT_TYPE_UNKNOWN;
tuning_method = OPA_UNKNOWN_TUNING;
total_atten = 0;
limiting_active = 0;
tx_preset_index = OPA_INVALID_INDEX;
break;
}
if (ppd->offline_disabled_reason ==
HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NONE))
apply_tunings(ppd, tx_preset_index, tuning_method,
total_atten, limiting_active);
if (!ret)
ppd->driver_link_ready = 1;
return;
bail:
ppd->driver_link_ready = 0;
}