linux_dsm_epyc7002/drivers/net/wireless/wl12xx
Juuso Oikarinen e19728181c wl1271: Go to ELP in idle
Allow the wl1271 go to ELP mode also in idle. This will reduce current
consumption remarkably in idle mode (~12mA -> ~0.2mA)

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09 13:43:10 -04:00
..
Kconfig wl1271: Changed wl1271_sdio to be selectable only on ARM 2010-03-10 17:44:43 -05:00
Makefile wl1271: Initial SDIO implementation 2010-03-09 15:02:59 -05:00
wl12xx_80211.h
wl1251_acx.c wl1251: implement wl1251_acx_tid_cfg() 2009-12-21 18:55:57 -05:00
wl1251_acx.h wl1251: implement wl1251_acx_tid_cfg() 2009-12-21 18:55:57 -05:00
wl1251_boot.c wl1251: reduce eeprom read wait time 2010-03-15 15:32:04 -04:00
wl1251_boot.h
wl1251_cmd.c wl1251: use mac80211 provided channel parameters in scanning 2010-01-12 13:51:26 -05:00
wl1251_cmd.h wl1251: use mac80211 provided channel parameters in scanning 2010-01-12 13:51:26 -05:00
wl1251_debugfs.c wl1251: fix potential crash 2010-03-16 15:20:25 -04:00
wl1251_debugfs.h
wl1251_event.c wl1251: Increase the beacon loss timeout value and handle regain event 2009-11-18 17:09:22 -05:00
wl1251_event.h
wl1251_init.c wl1251: implement acx_ac_cfg to configure hardware queues 2009-12-21 18:55:55 -05:00
wl1251_init.h wl1251: implement acx_ac_cfg to configure hardware queues 2009-12-21 18:55:55 -05:00
wl1251_io.c
wl1251_io.h wl1251: fix ELP_CTRL register accesses when using SDIO 2010-03-15 15:32:03 -04:00
wl1251_main.c wl1251: fix ELP_CTRL register accesses when using SDIO 2010-03-15 15:32:03 -04:00
wl1251_ps.c wl1251: fix ELP_CTRL register accesses when using SDIO 2010-03-15 15:32:03 -04:00
wl1251_ps.h wl1251: Implement delayed entry into ELP mode 2009-11-18 17:09:20 -05:00
wl1251_reg.h wl1251: add NVS in EEPROM support 2009-11-18 17:09:24 -05:00
wl1251_rx.c wl1251: use __dev_alloc_skb() on RX 2009-12-21 18:55:54 -05:00
wl1251_rx.h
wl1251_sdio.c wl1251: fix ELP_CTRL register accesses when using SDIO 2010-03-15 15:32:03 -04:00
wl1251_spi.c wl1251: use DRIVER_NAME macro in wl1251_spi_driver 2010-04-07 14:37:54 -04:00
wl1251_spi.h
wl1251_tx.c wl1251: update tx_hdr when aliging skb in tx 2009-12-21 18:56:00 -05:00
wl1251_tx.h wl1251: enable WMM 2009-12-21 18:56:02 -05:00
wl1251.h wl1251: fix ELP_CTRL register accesses when using SDIO 2010-03-15 15:32:03 -04:00
wl1271_acx.c wl1271: Use minimum rate for each band for control messages 2010-04-06 16:55:12 -04:00
wl1271_acx.h wl1271: Enable hardware keep alive messages 2010-03-31 14:39:16 -04:00
wl1271_boot.c wl1271: wait for disconnect command complete event 2010-03-31 14:39:14 -04:00
wl1271_boot.h wl1271: Configure clock-request drive mode to open-drain 2010-03-31 14:39:12 -04:00
wl1271_cmd.c wl1271: Configure rates for templates 2010-04-06 16:55:13 -04:00
wl1271_cmd.h wl1271: Configure rates for templates 2010-04-06 16:55:13 -04:00
wl1271_conf.h wl1271: Configure a higher listen interval to AP upon association 2010-04-06 16:55:13 -04:00
wl1271_debugfs.c wl1271: Cleaned up wlan power on/off functions 2010-03-23 16:50:18 -04:00
wl1271_debugfs.h
wl1271_event.c wl1271: Fix debug prints for beacon-loss and psm-entry-fail scenarios 2010-04-06 16:55:14 -04:00
wl1271_event.h wl1271: Fix event acknowledging functionality 2009-12-28 16:31:34 -05:00
wl1271_init.c wl1271: Configure rates for templates 2010-04-06 16:55:13 -04:00
wl1271_init.h wl1271: add most of the normal initialization commands to PLT mode 2010-02-19 15:52:44 -05:00
wl1271_io.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_io.h wl1271: Changed platform_device to be dynamically allocated 2010-03-23 16:50:25 -04:00
wl1271_main.c wl1271: Go to ELP in idle 2010-04-09 13:43:10 -04:00
wl1271_ps.c wl1271: Go to ELP in idle 2010-04-09 13:43:10 -04:00
wl1271_ps.h wl1271: Fix PSM entry 2010-02-19 15:52:42 -05:00
wl1271_reg.h wl1271: remove unused flags 2010-01-14 18:16:54 -05:00
wl1271_rx.c wl1271: remove deprecated usage of RX status noise 2010-03-31 14:39:14 -04:00
wl1271_rx.h wl1271: Clean up RX rate reporting 2010-03-31 14:39:11 -04:00
wl1271_sdio.c wl1271: fix sdio driver name in wl1271_sdio_driver 2010-04-06 16:55:11 -04:00
wl1271_spi.c wl1271: Update busyword checking mechanism 2010-03-31 14:39:13 -04:00
wl1271_testmode.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_testmode.h wl1271: add testmode support 2010-02-19 15:52:47 -05:00
wl1271_tx.c wl1271: Fix tx queue flushing 2010-04-06 16:55:14 -04:00
wl1271_tx.h wl1271: Use minimum rate for each band for control messages 2010-04-06 16:55:12 -04:00
wl1271.h wl1271: Go to ELP in idle 2010-04-09 13:43:10 -04:00