mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
43aea81778
This add bindings documentation for the clock and reset unit found on rk3188 and rk3066 SoCs from Rockchip. Also deprecate the old gate clock binding, as these shouldn't be used in the future. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
78 lines
2.3 KiB
Plaintext
78 lines
2.3 KiB
Plaintext
Device Tree Clock bindings for arch-rockchip
|
|
|
|
This binding uses the common clock binding[1].
|
|
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
== Gate clocks ==
|
|
|
|
These bindings are deprecated!
|
|
Please use the soc specific CRU bindings instead.
|
|
|
|
The gate registers form a continuos block which makes the dt node
|
|
structure a matter of taste, as either all gates can be put into
|
|
one gate clock spanning all registers or they can be divided into
|
|
the 10 individual gates containing 16 clocks each.
|
|
The code supports both approaches.
|
|
|
|
Required properties:
|
|
- compatible : "rockchip,rk2928-gate-clk"
|
|
- reg : shall be the control register address(es) for the clock.
|
|
- #clock-cells : from common clock binding; shall be set to 1
|
|
- clock-output-names : the corresponding gate names that the clock controls
|
|
- clocks : should contain the parent clock for each individual gate,
|
|
therefore the number of clocks elements should match the number of
|
|
clock-output-names
|
|
|
|
Example using multiple gate clocks:
|
|
|
|
clk_gates0: gate-clk@200000d0 {
|
|
compatible = "rockchip,rk2928-gate-clk";
|
|
reg = <0x200000d0 0x4>;
|
|
clocks = <&dummy>, <&dummy>,
|
|
<&dummy>, <&dummy>,
|
|
<&dummy>, <&dummy>,
|
|
<&dummy>, <&dummy>,
|
|
<&dummy>, <&dummy>,
|
|
<&dummy>, <&dummy>,
|
|
<&dummy>, <&dummy>,
|
|
<&dummy>, <&dummy>;
|
|
|
|
clock-output-names =
|
|
"gate_core_periph", "gate_cpu_gpll",
|
|
"gate_ddrphy", "gate_aclk_cpu",
|
|
"gate_hclk_cpu", "gate_pclk_cpu",
|
|
"gate_atclk_cpu", "gate_i2s0",
|
|
"gate_i2s0_frac", "gate_i2s1",
|
|
"gate_i2s1_frac", "gate_i2s2",
|
|
"gate_i2s2_frac", "gate_spdif",
|
|
"gate_spdif_frac", "gate_testclk";
|
|
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
clk_gates1: gate-clk@200000d4 {
|
|
compatible = "rockchip,rk2928-gate-clk";
|
|
reg = <0x200000d4 0x4>;
|
|
clocks = <&xin24m>, <&xin24m>,
|
|
<&xin24m>, <&dummy>,
|
|
<&dummy>, <&xin24m>,
|
|
<&xin24m>, <&dummy>,
|
|
<&xin24m>, <&dummy>,
|
|
<&xin24m>, <&dummy>,
|
|
<&xin24m>, <&dummy>,
|
|
<&xin24m>, <&dummy>;
|
|
|
|
clock-output-names =
|
|
"gate_timer0", "gate_timer1",
|
|
"gate_timer2", "gate_jtag",
|
|
"gate_aclk_lcdc1_src", "gate_otgphy0",
|
|
"gate_otgphy1", "gate_ddr_gpll",
|
|
"gate_uart0", "gate_frac_uart0",
|
|
"gate_uart1", "gate_frac_uart1",
|
|
"gate_uart2", "gate_frac_uart2",
|
|
"gate_uart3", "gate_frac_uart3";
|
|
|
|
#clock-cells = <1>;
|
|
};
|