AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-25 05:57:50 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
e0c38a4d1f
linux_dsm_epyc7002/tools/testing/selftests/net/pmtu.sh
Stefano Brivio 56fd865f46 selftests: pmtu: Introduce FoU and GUE PMTU exceptions tests 
Introduce eight tests, for FoU and GUE, with IPv4 and IPv6 payload,
on IPv4 and IPv6 transport, that check that PMTU exceptions are created
with the right value when exceeding the MTU on a link of the path.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 17:13:08 -08:00

1082 lines
31 KiB
Bash
Executable File
Raw Blame History

#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
#
# Check that route PMTU values match expectations, and that initial device MTU
# values are assigned correctly
#
# Tests currently implemented:
#
# - pmtu_ipv4
# Set up two namespaces, A and B, with two paths between them over routers
# R1 and R2 (also implemented with namespaces), with different MTUs:
#
# segment a_r1 segment b_r1 a_r1: 2000
# .--------------R1--------------. a_r2: 1500
# A B a_r3: 2000
# '--------------R2--------------' a_r4: 1400
# segment a_r2 segment b_r2
#
# Check that PMTU exceptions with the correct PMTU are created. Then
# decrease and increase the MTU of the local link for one of the paths,
# A to R1, checking that route exception PMTU changes accordingly over
# this path. Also check that locked exceptions are created when an ICMP
# message advertising a PMTU smaller than net.ipv4.route.min_pmtu is
# received
#
# - pmtu_ipv6
# Same as pmtu_ipv4, except for locked PMTU tests, using IPv6
#
# - pmtu_ipv4_vxlan4_exception
# Set up the same network topology as pmtu_ipv4, create a VXLAN tunnel
# over IPv4 between A and B, routed via R1. On the link between R1 and B,
# set a MTU lower than the VXLAN MTU and the MTU on the link between A and
# R1. Send IPv4 packets, exceeding the MTU between R1 and B, over VXLAN
# from A to B and check that the PMTU exception is created with the right
# value on A
#
# - pmtu_ipv6_vxlan4_exception
# Same as pmtu_ipv4_vxlan4_exception, but send IPv6 packets from A to B
#
# - pmtu_ipv4_vxlan6_exception
# Same as pmtu_ipv4_vxlan4_exception, but use IPv6 transport from A to B
#
# - pmtu_ipv6_vxlan6_exception
# Same as pmtu_ipv4_vxlan6_exception, but send IPv6 packets from A to B
#
# - pmtu_ipv4_geneve4_exception
# Same as pmtu_ipv4_vxlan4_exception, but using a GENEVE tunnel instead of
# VXLAN
#
# - pmtu_ipv6_geneve4_exception
# Same as pmtu_ipv6_vxlan4_exception, but using a GENEVE tunnel instead of
# VXLAN
#
# - pmtu_ipv4_geneve6_exception
# Same as pmtu_ipv4_vxlan6_exception, but using a GENEVE tunnel instead of
# VXLAN
#
# - pmtu_ipv6_geneve6_exception
# Same as pmtu_ipv6_vxlan6_exception, but using a GENEVE tunnel instead of
# VXLAN
#
# - pmtu_ipv{4,6}_fou{4,6}_exception
# Same as pmtu_ipv4_vxlan4, but using a direct IPv4/IPv6 encapsulation
# (FoU) over IPv4/IPv6, instead of VXLAN
#
# - pmtu_ipv{4,6}_fou{4,6}_exception
# Same as pmtu_ipv4_vxlan4, but using a generic UDP IPv4/IPv6
# encapsulation (GUE) over IPv4/IPv6, instead of VXLAN
#
# - pmtu_vti4_exception
# Set up vti tunnel on top of veth, with xfrm states and policies, in two
# namespaces with matching endpoints. Check that route exception is not
# created if link layer MTU is not exceeded, then exceed it and check that
# exception is created with the expected PMTU. The approach described
# below for IPv6 doesn't apply here, because, on IPv4, administrative MTU
# changes alone won't affect PMTU
#
# - pmtu_vti6_exception
# Set up vti6 tunnel on top of veth, with xfrm states and policies, in two
# namespaces with matching endpoints. Check that route exception is
# created by exceeding link layer MTU with ping to other endpoint. Then
# decrease and increase MTU of tunnel, checking that route exception PMTU
# changes accordingly
#
# - pmtu_vti4_default_mtu
# Set up vti4 tunnel on top of veth, in two namespaces with matching
# endpoints. Check that MTU assigned to vti interface is the MTU of the
# lower layer (veth) minus additional lower layer headers (zero, for veth)
# minus IPv4 header length
#
# - pmtu_vti6_default_mtu
# Same as above, for IPv6
#
# - pmtu_vti4_link_add_mtu
# Set up vti4 interface passing MTU value at link creation, check MTU is
# configured, and that link is not created with invalid MTU values
#
# - pmtu_vti6_link_add_mtu
# Same as above, for IPv6
#
# - pmtu_vti6_link_change_mtu
# Set up two dummy interfaces with different MTUs, create a vti6 tunnel
# and check that configured MTU is used on link creation and changes, and
# that MTU is properly calculated instead when MTU is not configured from
# userspace
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
# Some systems don't have a ping6 binary anymore
which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
tests="
pmtu_ipv4_exception ipv4: PMTU exceptions
pmtu_ipv6_exception ipv6: PMTU exceptions
pmtu_ipv4_vxlan4_exception IPv4 over vxlan4: PMTU exceptions
pmtu_ipv6_vxlan4_exception IPv6 over vxlan4: PMTU exceptions
pmtu_ipv4_vxlan6_exception IPv4 over vxlan6: PMTU exceptions
pmtu_ipv6_vxlan6_exception IPv6 over vxlan6: PMTU exceptions
pmtu_ipv4_geneve4_exception IPv4 over geneve4: PMTU exceptions
pmtu_ipv6_geneve4_exception IPv6 over geneve4: PMTU exceptions
pmtu_ipv4_geneve6_exception IPv4 over geneve6: PMTU exceptions
pmtu_ipv6_geneve6_exception IPv6 over geneve6: PMTU exceptions
pmtu_ipv4_fou4_exception IPv4 over fou4: PMTU exceptions
pmtu_ipv6_fou4_exception IPv6 over fou4: PMTU exceptions
pmtu_ipv4_fou6_exception IPv4 over fou6: PMTU exceptions
pmtu_ipv6_fou6_exception IPv6 over fou6: PMTU exceptions
pmtu_ipv4_gue4_exception IPv4 over gue4: PMTU exceptions
pmtu_ipv6_gue4_exception IPv6 over gue4: PMTU exceptions
pmtu_ipv4_gue6_exception IPv4 over gue6: PMTU exceptions
pmtu_ipv6_gue6_exception IPv6 over gue6: PMTU exceptions
pmtu_vti6_exception vti6: PMTU exceptions
pmtu_vti4_exception vti4: PMTU exceptions
pmtu_vti4_default_mtu vti4: default MTU assignment
pmtu_vti6_default_mtu vti6: default MTU assignment
pmtu_vti4_link_add_mtu vti4: MTU setting on link creation
pmtu_vti6_link_add_mtu vti6: MTU setting on link creation
pmtu_vti6_link_change_mtu vti6: MTU changes on link changes"
NS_A="ns-$(mktemp -u XXXXXX)"
NS_B="ns-$(mktemp -u XXXXXX)"
NS_R1="ns-$(mktemp -u XXXXXX)"
NS_R2="ns-$(mktemp -u XXXXXX)"
ns_a="ip netns exec ${NS_A}"
ns_b="ip netns exec ${NS_B}"
ns_r1="ip netns exec ${NS_R1}"
ns_r2="ip netns exec ${NS_R2}"
# Addressing and routing for tests with routers: four network segments, with
# index SEGMENT between 1 and 4, a common prefix (PREFIX4 or PREFIX6) and an
# identifier ID, which is 1 for hosts (A and B), 2 for routers (R1 and R2).
# Addresses are:
# - IPv4: PREFIX4.SEGMENT.ID (/24)
# - IPv6: PREFIX6:SEGMENT::ID (/64)
prefix4="10.0"
prefix6="fc00"
a_r1=1
a_r2=2
b_r1=3
b_r2=4
# ns peer segment
routing_addrs="
A R1 ${a_r1}
A R2 ${a_r2}
B R1 ${b_r1}
B R2 ${b_r2}
"
# Traffic from A to B goes through R1 by default, and through R2, if destined to
# B's address on the b_r2 segment.
# Traffic from B to A goes through R1.
# ns destination gateway
routes="
A default ${prefix4}.${a_r1}.2
A ${prefix4}.${b_r2}.1 ${prefix4}.${a_r2}.2
B default ${prefix4}.${b_r1}.2
A default ${prefix6}:${a_r1}::2
A ${prefix6}:${b_r2}::1 ${prefix6}:${a_r2}::2
B default ${prefix6}:${b_r1}::2
"
veth4_a_addr="192.168.1.1"
veth4_b_addr="192.168.1.2"
veth4_mask="24"
veth6_a_addr="fd00:1::a"
veth6_b_addr="fd00:1::b"
veth6_mask="64"
tunnel4_a_addr="192.168.2.1"
tunnel4_b_addr="192.168.2.2"
tunnel4_mask="24"
tunnel6_a_addr="fd00:2::a"
tunnel6_b_addr="fd00:2::b"
tunnel6_mask="64"
dummy6_0_addr="fc00:1000::0"
dummy6_1_addr="fc00:1001::0"
dummy6_mask="64"
cleanup_done=1
err_buf=
tcpdump_pids=
err() {
err_buf="${err_buf}${1}
"
}
err_flush() {
echo -n "${err_buf}"
err_buf=
}
# Find the auto-generated name for this namespace
nsname() {
eval echo \$NS_$1
}
setup_fou_or_gue() {
outer="${1}"
inner="${2}"
encap="${3}"
if [ "${outer}" = "4" ]; then
modprobe fou || return 2
a_addr="${prefix4}.${a_r1}.1"
b_addr="${prefix4}.${b_r1}.1"
if [ "${inner}" = "4" ]; then
type="ipip"
ipproto="4"
else
type="sit"
ipproto="41"
fi
else
modprobe fou6 || return 2
a_addr="${prefix6}:${a_r1}::1"
b_addr="${prefix6}:${b_r1}::1"
if [ "${inner}" = "4" ]; then
type="ip6tnl"
mode="mode ipip6"
ipproto="4 -6"
else
type="ip6tnl"
mode="mode ip6ip6"
ipproto="41 -6"
fi
fi
${ns_a} ip fou add port 5555 ipproto ${ipproto} || return 2
${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return 2
${ns_b} ip fou add port 5556 ipproto ${ipproto}
${ns_b} ip link add ${encap}_b type ${type} ${mode} local ${b_addr} remote ${a_addr} encap ${encap} encap-sport auto encap-dport 5555
if [ "${inner}" = "4" ]; then
${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${encap}_a
${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${encap}_b
else
${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${encap}_a
${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${encap}_b
fi
${ns_a} ip link set ${encap}_a up
${ns_b} ip link set ${encap}_b up
sleep 1
}
setup_fou44() {
setup_fou_or_gue 4 4 fou
}
setup_fou46() {
setup_fou_or_gue 4 6 fou
}
setup_fou64() {
setup_fou_or_gue 6 4 fou
}
setup_fou66() {
setup_fou_or_gue 6 6 fou
}
setup_gue44() {
setup_fou_or_gue 4 4 gue
}
setup_gue46() {
setup_fou_or_gue 4 6 gue
}
setup_gue64() {
setup_fou_or_gue 6 4 gue
}
setup_gue66() {
setup_fou_or_gue 6 6 gue
}
setup_namespaces() {
for n in ${NS_A} ${NS_B} ${NS_R1} ${NS_R2}; do
ip netns add ${n} || return 1
done
}
setup_veth() {
${ns_a} ip link add veth_a type veth peer name veth_b || return 1
${ns_a} ip link set veth_b netns ${NS_B}
${ns_a} ip addr add ${veth4_a_addr}/${veth4_mask} dev veth_a
${ns_b} ip addr add ${veth4_b_addr}/${veth4_mask} dev veth_b
${ns_a} ip addr add ${veth6_a_addr}/${veth6_mask} dev veth_a
${ns_b} ip addr add ${veth6_b_addr}/${veth6_mask} dev veth_b
${ns_a} ip link set veth_a up
${ns_b} ip link set veth_b up
}
setup_vti() {
proto=${1}
veth_a_addr="${2}"
veth_b_addr="${3}"
vti_a_addr="${4}"
vti_b_addr="${5}"
vti_mask=${6}
[ ${proto} -eq 6 ] && vti_type="vti6" || vti_type="vti"
${ns_a} ip link add vti${proto}_a type ${vti_type} local ${veth_a_addr} remote ${veth_b_addr} key 10 || return 1
${ns_b} ip link add vti${proto}_b type ${vti_type} local ${veth_b_addr} remote ${veth_a_addr} key 10
${ns_a} ip addr add ${vti_a_addr}/${vti_mask} dev vti${proto}_a
${ns_b} ip addr add ${vti_b_addr}/${vti_mask} dev vti${proto}_b
${ns_a} ip link set vti${proto}_a up
${ns_b} ip link set vti${proto}_b up
sleep 1
}
setup_vti4() {
setup_vti 4 ${veth4_a_addr} ${veth4_b_addr} ${tunnel4_a_addr} ${tunnel4_b_addr} ${tunnel4_mask}
}
setup_vti6() {
setup_vti 6 ${veth6_a_addr} ${veth6_b_addr} ${tunnel6_a_addr} ${tunnel6_b_addr} ${tunnel6_mask}
}
setup_vxlan_or_geneve() {
type="${1}"
a_addr="${2}"
b_addr="${3}"
opts="${4}"
if [ "${type}" = "vxlan" ]; then
opts="${opts} ttl 64 dstport 4789"
opts_a="local ${a_addr}"
opts_b="local ${b_addr}"
else
opts_a=""
opts_b=""
fi
${ns_a} ip link add ${type}_a type ${type} id 1 ${opts_a} remote ${b_addr} ${opts} || return 1
${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts}
${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${type}_a
${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b
${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${type}_a
${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b
${ns_a} ip link set ${type}_a up
${ns_b} ip link set ${type}_b up
sleep 1
}
setup_geneve4() {
setup_vxlan_or_geneve geneve ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 "df set"
}
setup_vxlan4() {
setup_vxlan_or_geneve vxlan ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 "df set"
}
setup_geneve6() {
setup_vxlan_or_geneve geneve ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1
}
setup_vxlan6() {
setup_vxlan_or_geneve vxlan ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1
}
setup_xfrm() {
proto=${1}
veth_a_addr="${2}"
veth_b_addr="${3}"
${ns_a} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel || return 1
${ns_a} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel
${ns_a} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel
${ns_a} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel
${ns_b} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel
${ns_b} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel
${ns_b} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel
${ns_b} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel
}
setup_xfrm4() {
setup_xfrm 4 ${veth4_a_addr} ${veth4_b_addr}
}
setup_xfrm6() {
setup_xfrm 6 ${veth6_a_addr} ${veth6_b_addr}
}
setup_routing() {
for i in ${NS_R1} ${NS_R2}; do
ip netns exec ${i} sysctl -q net/ipv4/ip_forward=1
ip netns exec ${i} sysctl -q net/ipv6/conf/all/forwarding=1
done
for i in ${routing_addrs}; do
[ "${ns}" = "" ] && ns="${i}" && continue
[ "${peer}" = "" ] && peer="${i}" && continue
[ "${segment}" = "" ] && segment="${i}"
ns_name="$(nsname ${ns})"
peer_name="$(nsname ${peer})"
if="veth_${ns}-${peer}"
ifpeer="veth_${peer}-${ns}"
# Create veth links
ip link add ${if} up netns ${ns_name} type veth peer name ${ifpeer} netns ${peer_name} || return 1
ip -n ${peer_name} link set dev ${ifpeer} up
# Add addresses
ip -n ${ns_name} addr add ${prefix4}.${segment}.1/24 dev ${if}
ip -n ${ns_name} addr add ${prefix6}:${segment}::1/64 dev ${if}
ip -n ${peer_name} addr add ${prefix4}.${segment}.2/24 dev ${ifpeer}
ip -n ${peer_name} addr add ${prefix6}:${segment}::2/64 dev ${ifpeer}
ns=""; peer=""; segment=""
done
for i in ${routes}; do
[ "${ns}" = "" ] && ns="${i}" && continue
[ "${addr}" = "" ] && addr="${i}" && continue
[ "${gw}" = "" ] && gw="${i}"
ns_name="$(nsname ${ns})"
ip -n ${ns_name} route add ${addr} via ${gw}
ns=""; addr=""; gw=""
done
}
setup() {
[ "$(id -u)" -ne 0 ] && echo " need to run as root" && return $ksft_skip
cleanup_done=0
for arg do
eval setup_${arg} || { echo " ${arg} not supported"; return 1; }
done
}
trace() {
[ $tracing -eq 0 ] && return
for arg do
[ "${ns_cmd}" = "" ] && ns_cmd="${arg}" && continue
${ns_cmd} tcpdump -s 0 -i "${arg}" -w "${name}_${arg}.pcap" 2> /dev/null &
tcpdump_pids="${tcpdump_pids} $!"
ns_cmd=
done
sleep 1
}
cleanup() {
for pid in ${tcpdump_pids}; do
kill ${pid}
done
tcpdump_pids=
[ ${cleanup_done} -eq 1 ] && return
for n in ${NS_A} ${NS_B} ${NS_R1} ${NS_R2}; do
ip netns del ${n} 2> /dev/null
done
cleanup_done=1
}
mtu() {
ns_cmd="${1}"
dev="${2}"
mtu="${3}"
${ns_cmd} ip link set dev ${dev} mtu ${mtu}
}
mtu_parse() {
input="${1}"
next=0
for i in ${input}; do
[ ${next} -eq 1 -a "${i}" = "lock" ] && next=2 && continue
[ ${next} -eq 1 ] && echo "${i}" && return
[ ${next} -eq 2 ] && echo "lock ${i}" && return
[ "${i}" = "mtu" ] && next=1
done
}
link_get() {
ns_cmd="${1}"
name="${2}"
${ns_cmd} ip link show dev "${name}"
}
link_get_mtu() {
ns_cmd="${1}"
name="${2}"
mtu_parse "$(link_get "${ns_cmd}" ${name})"
}
route_get_dst_exception() {
ns_cmd="${1}"
dst="${2}"
${ns_cmd} ip route get "${dst}"
}
route_get_dst_pmtu_from_exception() {
ns_cmd="${1}"
dst="${2}"
mtu_parse "$(route_get_dst_exception "${ns_cmd}" ${dst})"
}
check_pmtu_value() {
expected="${1}"
value="${2}"
event="${3}"
[ "${expected}" = "any" ] && [ -n "${value}" ] && return 0
[ "${value}" = "${expected}" ] && return 0
[ -z "${value}" ] && err " PMTU exception wasn't created after ${event}" && return 1
[ -z "${expected}" ] && err " PMTU exception shouldn't exist after ${event}" && return 1
err " found PMTU exception with incorrect MTU ${value}, expected ${expected}, after ${event}"
return 1
}
test_pmtu_ipvX() {
family=${1}
setup namespaces routing || return 2
trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
"${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \
"${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \
"${ns_r2}" veth_R2-B "${ns_b}" veth_B-R2
if [ ${family} -eq 4 ]; then
ping=ping
dst1="${prefix4}.${b_r1}.1"
dst2="${prefix4}.${b_r2}.1"
else
ping=${ping6}
dst1="${prefix6}:${b_r1}::1"
dst2="${prefix6}:${b_r2}::1"
fi
# Set up initial MTU values
mtu "${ns_a}" veth_A-R1 2000
mtu "${ns_r1}" veth_R1-A 2000
mtu "${ns_r1}" veth_R1-B 1400
mtu "${ns_b}" veth_B-R1 1400
mtu "${ns_a}" veth_A-R2 2000
mtu "${ns_r2}" veth_R2-A 2000
mtu "${ns_r2}" veth_R2-B 1500
mtu "${ns_b}" veth_B-R2 1500
# Create route exceptions
${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1800 ${dst1} > /dev/null
${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1800 ${dst2} > /dev/null
# Check that exceptions have been created with the correct PMTU
pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})"
check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1
pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1
# Decrease local MTU below PMTU, check for PMTU decrease in route exception
mtu "${ns_a}" veth_A-R1 1300
mtu "${ns_r1}" veth_R1-A 1300
pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})"
check_pmtu_value "1300" "${pmtu_1}" "decreasing local MTU" || return 1
# Second exception shouldn't be modified
pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
check_pmtu_value "1500" "${pmtu_2}" "changing local MTU on a link not on this path" || return 1
# Increase MTU, check for PMTU increase in route exception
mtu "${ns_a}" veth_A-R1 1700
mtu "${ns_r1}" veth_R1-A 1700
pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})"
check_pmtu_value "1700" "${pmtu_1}" "increasing local MTU" || return 1
# Second exception shouldn't be modified
pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
check_pmtu_value "1500" "${pmtu_2}" "changing local MTU on a link not on this path" || return 1
# Skip PMTU locking tests for IPv6
[ $family -eq 6 ] && return 0
# Decrease remote MTU on path via R2, get new exception
mtu "${ns_r2}" veth_R2-B 400
mtu "${ns_b}" veth_B-R2 400
${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1400 ${dst2} > /dev/null
pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1
# Decrease local MTU below PMTU
mtu "${ns_a}" veth_A-R2 500
mtu "${ns_r2}" veth_R2-A 500
pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
check_pmtu_value "500" "${pmtu_2}" "decreasing local MTU" || return 1
# Increase local MTU
mtu "${ns_a}" veth_A-R2 1500
mtu "${ns_r2}" veth_R2-A 1500
pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
check_pmtu_value "1500" "${pmtu_2}" "increasing local MTU" || return 1
# Get new exception
${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1400 ${dst2} > /dev/null
pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1
}
test_pmtu_ipv4_exception() {
test_pmtu_ipvX 4
}
test_pmtu_ipv6_exception() {
test_pmtu_ipvX 6
}
test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() {
type=${1}
family=${2}
outer_family=${3}
ll_mtu=4000
if [ ${outer_family} -eq 4 ]; then
setup namespaces routing ${type}4 || return 2
# IPv4 header UDP header VXLAN/GENEVE header Ethernet header
exp_mtu=$((${ll_mtu} - 20 - 8 - 8 - 14))
else
setup namespaces routing ${type}6 || return 2
# IPv6 header UDP header VXLAN/GENEVE header Ethernet header
exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - 14))
fi
trace "${ns_a}" ${type}_a "${ns_b}" ${type}_b \
"${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
"${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B
if [ ${family} -eq 4 ]; then
ping=ping
dst=${tunnel4_b_addr}
else
ping=${ping6}
dst=${tunnel6_b_addr}
fi
# Create route exception by exceeding link layer MTU
mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000))
mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
mtu "${ns_b}" veth_B-R1 ${ll_mtu}
mtu "${ns_r1}" veth_R1-B ${ll_mtu}
mtu "${ns_a}" ${type}_a $((${ll_mtu} + 1000))
mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000))
${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s $((${ll_mtu} + 500)) ${dst} > /dev/null
# Check that exception was created
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ${type} interface"
}
test_pmtu_ipv4_vxlan4_exception() {
test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 4 4
}
test_pmtu_ipv6_vxlan4_exception() {
test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 6 4
}
test_pmtu_ipv4_geneve4_exception() {
test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 4 4
}
test_pmtu_ipv6_geneve4_exception() {
test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 6 4
}
test_pmtu_ipv4_vxlan6_exception() {
test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 4 6
}
test_pmtu_ipv6_vxlan6_exception() {
test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 6 6
}
test_pmtu_ipv4_geneve6_exception() {
test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 4 6
}
test_pmtu_ipv6_geneve6_exception() {
test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 6 6
}
test_pmtu_ipvX_over_fouY_or_gueY() {
inner_family=${1}
outer_family=${2}
encap=${3}
ll_mtu=4000
setup namespaces routing ${encap}${outer_family}${inner_family} || return 2
trace "${ns_a}" ${encap}_a "${ns_b}" ${encap}_b \
"${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
"${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B
if [ ${inner_family} -eq 4 ]; then
ping=ping
dst=${tunnel4_b_addr}
else
ping=${ping6}
dst=${tunnel6_b_addr}
fi
if [ "${encap}" = "gue" ]; then
encap_overhead=4
else
encap_overhead=0
fi
if [ ${outer_family} -eq 4 ]; then
# IPv4 header UDP header
exp_mtu=$((${ll_mtu} - 20 - 8 - ${encap_overhead}))
else
# IPv6 header Option 4 UDP header
exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - ${encap_overhead}))
fi
# Create route exception by exceeding link layer MTU
mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000))
mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
mtu "${ns_b}" veth_B-R1 ${ll_mtu}
mtu "${ns_r1}" veth_R1-B ${ll_mtu}
mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000))
mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000))
${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s $((${ll_mtu} + 500)) ${dst} > /dev/null
# Check that exception was created
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ${encap} interface"
}
test_pmtu_ipv4_fou4_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 4 4 fou
}
test_pmtu_ipv6_fou4_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 6 4 fou
}
test_pmtu_ipv4_fou6_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 4 6 fou
}
test_pmtu_ipv6_fou6_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 6 6 fou
}
test_pmtu_ipv4_gue4_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 4 4 gue
}
test_pmtu_ipv6_gue4_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 6 4 gue
}
test_pmtu_ipv4_gue6_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 4 6 gue
}
test_pmtu_ipv6_gue6_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 6 6 gue
}
test_pmtu_vti4_exception() {
setup namespaces veth vti4 xfrm4 || return 2
trace "${ns_a}" veth_a "${ns_b}" veth_b \
"${ns_a}" vti4_a "${ns_b}" vti4_b
veth_mtu=1500
vti_mtu=$((veth_mtu - 20))
# SPI SN IV ICV pad length next header
esp_payload_rfc4106=$((vti_mtu - 4 - 4 - 8 - 16 - 1 - 1))
ping_payload=$((esp_payload_rfc4106 - 28))
mtu "${ns_a}" veth_a ${veth_mtu}
mtu "${ns_b}" veth_b ${veth_mtu}
mtu "${ns_a}" vti4_a ${vti_mtu}
mtu "${ns_b}" vti4_b ${vti_mtu}
# Send DF packet without exceeding link layer MTU, check that no
# exception is created
${ns_a} ping -q -M want -i 0.1 -w 2 -s ${ping_payload} ${tunnel4_b_addr} > /dev/null
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})"
check_pmtu_value "" "${pmtu}" "sending packet smaller than PMTU (IP payload length ${esp_payload_rfc4106})" || return 1
# Now exceed link layer MTU by one byte, check that exception is created
# with the right PMTU value
${ns_a} ping -q -M want -i 0.1 -w 2 -s $((ping_payload + 1)) ${tunnel4_b_addr} > /dev/null
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})"
check_pmtu_value "${esp_payload_rfc4106}" "${pmtu}" "exceeding PMTU (IP payload length $((esp_payload_rfc4106 + 1)))"
}
test_pmtu_vti6_exception() {
setup namespaces veth vti6 xfrm6 || return 2
trace "${ns_a}" veth_a "${ns_b}" veth_b \
"${ns_a}" vti6_a "${ns_b}" vti6_b
fail=0
# Create route exception by exceeding link layer MTU
mtu "${ns_a}" veth_a 4000
mtu "${ns_b}" veth_b 4000
mtu "${ns_a}" vti6_a 5000
mtu "${ns_b}" vti6_b 5000
${ns_a} ${ping6} -q -i 0.1 -w 2 -s 60000 ${tunnel6_b_addr} > /dev/null
# Check that exception was created
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})"
check_pmtu_value any "${pmtu}" "creating tunnel exceeding link layer MTU" || return 1
# Decrease tunnel MTU, check for PMTU decrease in route exception
mtu "${ns_a}" vti6_a 3000
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})"
check_pmtu_value "3000" "${pmtu}" "decreasing tunnel MTU" || fail=1
# Increase tunnel MTU, check for PMTU increase in route exception
mtu "${ns_a}" vti6_a 9000
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})"
check_pmtu_value "9000" "${pmtu}" "increasing tunnel MTU" || fail=1
return ${fail}
}
test_pmtu_vti4_default_mtu() {
setup namespaces veth vti4 || return 2
# Check that MTU of vti device is MTU of veth minus IPv4 header length
veth_mtu="$(link_get_mtu "${ns_a}" veth_a)"
vti4_mtu="$(link_get_mtu "${ns_a}" vti4_a)"
if [ $((veth_mtu - vti4_mtu)) -ne 20 ]; then
err " vti MTU ${vti4_mtu} is not veth MTU ${veth_mtu} minus IPv4 header length"
return 1
fi
}
test_pmtu_vti6_default_mtu() {
setup namespaces veth vti6 || return 2
# Check that MTU of vti device is MTU of veth minus IPv6 header length
veth_mtu="$(link_get_mtu "${ns_a}" veth_a)"
vti6_mtu="$(link_get_mtu "${ns_a}" vti6_a)"
if [ $((veth_mtu - vti6_mtu)) -ne 40 ]; then
err " vti MTU ${vti6_mtu} is not veth MTU ${veth_mtu} minus IPv6 header length"
return 1
fi
}
test_pmtu_vti4_link_add_mtu() {
setup namespaces || return 2
${ns_a} ip link add vti4_a type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10
[ $? -ne 0 ] && err " vti not supported" && return 2
${ns_a} ip link del vti4_a
fail=0
min=68
max=$((65535 - 20))
# Check invalid values first
for v in $((min - 1)) $((max + 1)); do
${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10 2>/dev/null
# This can fail, or MTU can be adjusted to a proper value
[ $? -ne 0 ] && continue
mtu="$(link_get_mtu "${ns_a}" vti4_a)"
if [ ${mtu} -lt ${min} -o ${mtu} -gt ${max} ]; then
err " vti tunnel created with invalid MTU ${mtu}"
fail=1
fi
${ns_a} ip link del vti4_a
done
# Now check valid values
for v in ${min} 1300 ${max}; do
${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10
mtu="$(link_get_mtu "${ns_a}" vti4_a)"
${ns_a} ip link del vti4_a
if [ "${mtu}" != "${v}" ]; then
err " vti MTU ${mtu} doesn't match configured value ${v}"
fail=1
fi
done
return ${fail}
}
test_pmtu_vti6_link_add_mtu() {
setup namespaces || return 2
${ns_a} ip link add vti6_a type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10
[ $? -ne 0 ] && err " vti6 not supported" && return 2
${ns_a} ip link del vti6_a
fail=0
min=68 # vti6 can carry IPv4 packets too
max=$((65535 - 40))
# Check invalid values first
for v in $((min - 1)) $((max + 1)); do
${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 2>/dev/null
# This can fail, or MTU can be adjusted to a proper value
[ $? -ne 0 ] && continue
mtu="$(link_get_mtu "${ns_a}" vti6_a)"
if [ ${mtu} -lt ${min} -o ${mtu} -gt ${max} ]; then
err " vti6 tunnel created with invalid MTU ${v}"
fail=1
fi
${ns_a} ip link del vti6_a
done
# Now check valid values
for v in 68 1280 1300 $((65535 - 40)); do
${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10
mtu="$(link_get_mtu "${ns_a}" vti6_a)"
${ns_a} ip link del vti6_a
if [ "${mtu}" != "${v}" ]; then
err " vti6 MTU ${mtu} doesn't match configured value ${v}"
fail=1
fi
done
return ${fail}
}
test_pmtu_vti6_link_change_mtu() {
setup namespaces || return 2
${ns_a} ip link add dummy0 mtu 1500 type dummy
[ $? -ne 0 ] && err " dummy not supported" && return 2
${ns_a} ip link add dummy1 mtu 3000 type dummy
${ns_a} ip link set dummy0 up
${ns_a} ip link set dummy1 up
${ns_a} ip addr add ${dummy6_0_addr}/${dummy6_mask} dev dummy0
${ns_a} ip addr add ${dummy6_1_addr}/${dummy6_mask} dev dummy1
fail=0
# Create vti6 interface bound to device, passing MTU, check it
${ns_a} ip link add vti6_a mtu 1300 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr}
mtu="$(link_get_mtu "${ns_a}" vti6_a)"
if [ ${mtu} -ne 1300 ]; then
err " vti6 MTU ${mtu} doesn't match configured value 1300"
fail=1
fi
# Move to another device with different MTU, without passing MTU, check
# MTU is adjusted
${ns_a} ip link set vti6_a type vti6 remote ${dummy6_1_addr} local ${dummy6_1_addr}
mtu="$(link_get_mtu "${ns_a}" vti6_a)"
if [ ${mtu} -ne $((3000 - 40)) ]; then
err " vti MTU ${mtu} is not dummy MTU 3000 minus IPv6 header length"
fail=1
fi
# Move it back, passing MTU, check MTU is not overridden
${ns_a} ip link set vti6_a mtu 1280 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr}
mtu="$(link_get_mtu "${ns_a}" vti6_a)"
if [ ${mtu} -ne 1280 ]; then
err " vti6 MTU ${mtu} doesn't match configured value 1280"
fail=1
fi
return ${fail}
}
usage() {
echo
echo "$0 [OPTIONS] [TEST]..."
echo "If no TEST argument is given, all tests will be run."
echo
echo "Options"
echo " --trace: capture traffic to TEST_INTERFACE.pcap"
echo
echo "Available tests${tests}"
exit 1
}
exitcode=0
desc=0
IFS="
"
tracing=0
for arg do
if [ "${arg}" != "${arg#--*}" ]; then
opt="${arg#--}"
if [ "${opt}" = "trace" ]; then
if which tcpdump > /dev/null 2>&1; then
tracing=1
else
echo "=== tcpdump not available, tracing disabled"
fi
else
usage
fi
else
# Check first that all requested tests are available before
# running any
command -v > /dev/null "test_${arg}" || { echo "=== Test ${arg} not found"; usage; }
fi
done
trap cleanup EXIT
for t in ${tests}; do
[ $desc -eq 0 ] && name="${t}" && desc=1 && continue || desc=0
run_this=1
for arg do
[ "${arg}" != "${arg#--*}" ] && continue
[ "${arg}" = "${name}" ] && run_this=1 && break
run_this=0
done
[ $run_this -eq 0 ] && continue
(
unset IFS
eval test_${name}
ret=$?
cleanup
if [ $ret -eq 0 ]; then
printf "TEST: %-60s [ OK ]\n" "${t}"
elif [ $ret -eq 1 ]; then
printf "TEST: %-60s [FAIL]\n" "${t}"
err_flush
exit 1
elif [ $ret -eq 2 ]; then
printf "TEST: %-60s [SKIP]\n" "${t}"
err_flush
fi
)
[ $? -ne 0 ] && exitcode=1
done
exit ${exitcode}
Reference in New Issue View Git Blame Copy Permalink