Bruce Allan e08f626b33 e1000e: workaround DMA unit hang on I218 ... At 1000Mbps link speed, one of the MAC's internal clocks can be stopped for up to 4us when entering K1 (a power mode of the MAC-PHY interconnect). If the MAC is waiting for completion indications for 2 DMA write requests into Host memory (e.g. descriptor writeback or Rx packet writing) and the indications occur while the clock is stopped, both indications will be missed by the MAC causing the MAC to wait for the completion indications and be unable to generate further DMA write requests. This results in an apparent hardware hang. Work-around the issue by disabling the de-assertion of the clock request when 1000Mbps link is acquired (K1 must be disabled while doing this). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2013-03-05 01:01:43 -08:00
..
e1000	e1000: fix whitespace issues and multi-line comments	2013-02-15 21:46:37 -08:00
e1000e	e1000e: workaround DMA unit hang on I218	2013-03-05 01:01:43 -08:00
igb	igb: increase timeout for ethtool offline self-test	2013-02-15 21:46:54 -08:00
igbvf	igbvf: Make next_to_watch a pointer and adjust memory barriers to avoid races	2013-02-15 21:46:51 -08:00
ixgb	drivers: net: Remove remaining alloc/OOM messages	2013-02-08 17:44:39 -05:00
ixgbe	ixgbe: Update DESC_NEEDED define to adjust for changes to MAX_SKB_FRAGS	2013-02-15 23:59:32 -08:00
ixgbevf	ixgbevf: Make sure link status and speed are fetched	2013-01-28 00:19:52 -08:00
e100.c	remove init of dev->perm_addr in drivers	2013-01-08 18:00:48 -08:00
Kconfig	Driver core patches for 3.9-rc1	2013-02-21 12:05:51 -08:00
Makefile