mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 08:15:17 +07:00
14f89e0881
Due to the use of sizeof(), command size set for the spi transfer
was wrong. Driver was sending and receiving always 1 byte less
and especially on write, it was hanging.
echo -n -e "\\x1\\x2\\x3\\x4" > /dev/mtd1
And read part too now works as expected.
hexdump -C -n16 /dev/mtd1
00000000 01 02 03 04 ab f3 ad c2 ab e3 f4 36 dd 38 04 15
00000010
Fixes: 4379075a87
("mtd: mchp23k256: Add support for mchp23lcv1024")
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
247 lines
5.5 KiB
C
247 lines
5.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* mchp23k256.c
|
|
*
|
|
* Driver for Microchip 23k256 SPI RAM chips
|
|
*
|
|
* Copyright © 2016 Andrew Lunn <andrew@lunn.ch>
|
|
*/
|
|
#include <linux/device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/spi/flash.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#define MAX_CMD_SIZE 4
|
|
|
|
struct mchp23_caps {
|
|
u8 addr_width;
|
|
unsigned int size;
|
|
};
|
|
|
|
struct mchp23k256_flash {
|
|
struct spi_device *spi;
|
|
struct mutex lock;
|
|
struct mtd_info mtd;
|
|
const struct mchp23_caps *caps;
|
|
};
|
|
|
|
#define MCHP23K256_CMD_WRITE_STATUS 0x01
|
|
#define MCHP23K256_CMD_WRITE 0x02
|
|
#define MCHP23K256_CMD_READ 0x03
|
|
#define MCHP23K256_MODE_SEQ BIT(6)
|
|
|
|
#define to_mchp23k256_flash(x) container_of(x, struct mchp23k256_flash, mtd)
|
|
|
|
static void mchp23k256_addr2cmd(struct mchp23k256_flash *flash,
|
|
unsigned int addr, u8 *cmd)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* Address is sent in big endian (MSB first) and we skip
|
|
* the first entry of the cmd array which contains the cmd
|
|
* opcode.
|
|
*/
|
|
for (i = flash->caps->addr_width; i > 0; i--, addr >>= 8)
|
|
cmd[i] = addr;
|
|
}
|
|
|
|
static int mchp23k256_cmdsz(struct mchp23k256_flash *flash)
|
|
{
|
|
return 1 + flash->caps->addr_width;
|
|
}
|
|
|
|
static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len,
|
|
size_t *retlen, const unsigned char *buf)
|
|
{
|
|
struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
|
|
struct spi_transfer transfer[2] = {};
|
|
struct spi_message message;
|
|
unsigned char command[MAX_CMD_SIZE];
|
|
int ret, cmd_len;
|
|
|
|
spi_message_init(&message);
|
|
|
|
cmd_len = mchp23k256_cmdsz(flash);
|
|
|
|
command[0] = MCHP23K256_CMD_WRITE;
|
|
mchp23k256_addr2cmd(flash, to, command);
|
|
|
|
transfer[0].tx_buf = command;
|
|
transfer[0].len = cmd_len;
|
|
spi_message_add_tail(&transfer[0], &message);
|
|
|
|
transfer[1].tx_buf = buf;
|
|
transfer[1].len = len;
|
|
spi_message_add_tail(&transfer[1], &message);
|
|
|
|
mutex_lock(&flash->lock);
|
|
|
|
ret = spi_sync(flash->spi, &message);
|
|
|
|
mutex_unlock(&flash->lock);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (retlen && message.actual_length > cmd_len)
|
|
*retlen += message.actual_length - cmd_len;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len,
|
|
size_t *retlen, unsigned char *buf)
|
|
{
|
|
struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
|
|
struct spi_transfer transfer[2] = {};
|
|
struct spi_message message;
|
|
unsigned char command[MAX_CMD_SIZE];
|
|
int ret, cmd_len;
|
|
|
|
spi_message_init(&message);
|
|
|
|
cmd_len = mchp23k256_cmdsz(flash);
|
|
|
|
memset(&transfer, 0, sizeof(transfer));
|
|
command[0] = MCHP23K256_CMD_READ;
|
|
mchp23k256_addr2cmd(flash, from, command);
|
|
|
|
transfer[0].tx_buf = command;
|
|
transfer[0].len = cmd_len;
|
|
spi_message_add_tail(&transfer[0], &message);
|
|
|
|
transfer[1].rx_buf = buf;
|
|
transfer[1].len = len;
|
|
spi_message_add_tail(&transfer[1], &message);
|
|
|
|
mutex_lock(&flash->lock);
|
|
|
|
ret = spi_sync(flash->spi, &message);
|
|
|
|
mutex_unlock(&flash->lock);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (retlen && message.actual_length > cmd_len)
|
|
*retlen += message.actual_length - cmd_len;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the device into sequential mode. This allows read/writes to the
|
|
* entire SRAM in a single operation
|
|
*/
|
|
static int mchp23k256_set_mode(struct spi_device *spi)
|
|
{
|
|
struct spi_transfer transfer = {};
|
|
struct spi_message message;
|
|
unsigned char command[2];
|
|
|
|
spi_message_init(&message);
|
|
|
|
command[0] = MCHP23K256_CMD_WRITE_STATUS;
|
|
command[1] = MCHP23K256_MODE_SEQ;
|
|
|
|
transfer.tx_buf = command;
|
|
transfer.len = sizeof(command);
|
|
spi_message_add_tail(&transfer, &message);
|
|
|
|
return spi_sync(spi, &message);
|
|
}
|
|
|
|
static const struct mchp23_caps mchp23k256_caps = {
|
|
.size = SZ_32K,
|
|
.addr_width = 2,
|
|
};
|
|
|
|
static const struct mchp23_caps mchp23lcv1024_caps = {
|
|
.size = SZ_128K,
|
|
.addr_width = 3,
|
|
};
|
|
|
|
static int mchp23k256_probe(struct spi_device *spi)
|
|
{
|
|
struct mchp23k256_flash *flash;
|
|
struct flash_platform_data *data;
|
|
int err;
|
|
|
|
flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
|
|
if (!flash)
|
|
return -ENOMEM;
|
|
|
|
flash->spi = spi;
|
|
mutex_init(&flash->lock);
|
|
spi_set_drvdata(spi, flash);
|
|
|
|
err = mchp23k256_set_mode(spi);
|
|
if (err)
|
|
return err;
|
|
|
|
data = dev_get_platdata(&spi->dev);
|
|
|
|
flash->caps = of_device_get_match_data(&spi->dev);
|
|
if (!flash->caps)
|
|
flash->caps = &mchp23k256_caps;
|
|
|
|
mtd_set_of_node(&flash->mtd, spi->dev.of_node);
|
|
flash->mtd.dev.parent = &spi->dev;
|
|
flash->mtd.type = MTD_RAM;
|
|
flash->mtd.flags = MTD_CAP_RAM;
|
|
flash->mtd.writesize = 1;
|
|
flash->mtd.size = flash->caps->size;
|
|
flash->mtd._read = mchp23k256_read;
|
|
flash->mtd._write = mchp23k256_write;
|
|
|
|
err = mtd_device_register(&flash->mtd, data ? data->parts : NULL,
|
|
data ? data->nr_parts : 0);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp23k256_remove(struct spi_device *spi)
|
|
{
|
|
struct mchp23k256_flash *flash = spi_get_drvdata(spi);
|
|
|
|
return mtd_device_unregister(&flash->mtd);
|
|
}
|
|
|
|
static const struct of_device_id mchp23k256_of_table[] = {
|
|
{
|
|
.compatible = "microchip,mchp23k256",
|
|
.data = &mchp23k256_caps,
|
|
},
|
|
{
|
|
.compatible = "microchip,mchp23lcv1024",
|
|
.data = &mchp23lcv1024_caps,
|
|
},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mchp23k256_of_table);
|
|
|
|
static struct spi_driver mchp23k256_driver = {
|
|
.driver = {
|
|
.name = "mchp23k256",
|
|
.of_match_table = of_match_ptr(mchp23k256_of_table),
|
|
},
|
|
.probe = mchp23k256_probe,
|
|
.remove = mchp23k256_remove,
|
|
};
|
|
|
|
module_spi_driver(mchp23k256_driver);
|
|
|
|
MODULE_DESCRIPTION("MTD SPI driver for MCHP23K256 RAM chips");
|
|
MODULE_AUTHOR("Andrew Lunn <andre@lunn.ch>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("spi:mchp23k256");
|