mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 20:56:44 +07:00
c6463c651d
Normally, sd_read_capacity sets sdp->use_16_for_rw to 1 based on the disk capacity so that READ16/WRITE16 are used for large drives. However, for a zoned disk with RC_BASIS set to 0, the capacity reported through READ_CAPACITY may be very small, leading to use_16_for_rw not being set and READ10/WRITE10 commands being used, even after the actual zoned disk capacity is corrected in sd_zbc_read_zones. This causes LBA offset overflow for accesses beyond 2TB. As the ZBC standard makes it mandatory for ZBC drives to support the READ16/WRITE16 commands anyway, make sure that use_16_for_rw is set. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> eviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
649 lines
15 KiB
C
649 lines
15 KiB
C
/*
|
|
* SCSI Zoned Block commands
|
|
*
|
|
* Copyright (C) 2014-2015 SUSE Linux GmbH
|
|
* Written by: Hannes Reinecke <hare@suse.de>
|
|
* Modified by: Damien Le Moal <damien.lemoal@hgst.com>
|
|
* Modified by: Shaun Tancheff <shaun.tancheff@seagate.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License version
|
|
* 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
|
|
* USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_dbg.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_driver.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_eh.h>
|
|
|
|
#include "sd.h"
|
|
#include "scsi_priv.h"
|
|
|
|
enum zbc_zone_type {
|
|
ZBC_ZONE_TYPE_CONV = 0x1,
|
|
ZBC_ZONE_TYPE_SEQWRITE_REQ,
|
|
ZBC_ZONE_TYPE_SEQWRITE_PREF,
|
|
ZBC_ZONE_TYPE_RESERVED,
|
|
};
|
|
|
|
enum zbc_zone_cond {
|
|
ZBC_ZONE_COND_NO_WP,
|
|
ZBC_ZONE_COND_EMPTY,
|
|
ZBC_ZONE_COND_IMP_OPEN,
|
|
ZBC_ZONE_COND_EXP_OPEN,
|
|
ZBC_ZONE_COND_CLOSED,
|
|
ZBC_ZONE_COND_READONLY = 0xd,
|
|
ZBC_ZONE_COND_FULL,
|
|
ZBC_ZONE_COND_OFFLINE,
|
|
};
|
|
|
|
/**
|
|
* Convert a zone descriptor to a zone struct.
|
|
*/
|
|
static void sd_zbc_parse_report(struct scsi_disk *sdkp,
|
|
u8 *buf,
|
|
struct blk_zone *zone)
|
|
{
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
memset(zone, 0, sizeof(struct blk_zone));
|
|
|
|
zone->type = buf[0] & 0x0f;
|
|
zone->cond = (buf[1] >> 4) & 0xf;
|
|
if (buf[1] & 0x01)
|
|
zone->reset = 1;
|
|
if (buf[1] & 0x02)
|
|
zone->non_seq = 1;
|
|
|
|
zone->len = logical_to_sectors(sdp, get_unaligned_be64(&buf[8]));
|
|
zone->start = logical_to_sectors(sdp, get_unaligned_be64(&buf[16]));
|
|
zone->wp = logical_to_sectors(sdp, get_unaligned_be64(&buf[24]));
|
|
if (zone->type != ZBC_ZONE_TYPE_CONV &&
|
|
zone->cond == ZBC_ZONE_COND_FULL)
|
|
zone->wp = zone->start + zone->len;
|
|
}
|
|
|
|
/**
|
|
* Issue a REPORT ZONES scsi command.
|
|
*/
|
|
static int sd_zbc_report_zones(struct scsi_disk *sdkp, unsigned char *buf,
|
|
unsigned int buflen, sector_t lba)
|
|
{
|
|
struct scsi_device *sdp = sdkp->device;
|
|
const int timeout = sdp->request_queue->rq_timeout;
|
|
struct scsi_sense_hdr sshdr;
|
|
unsigned char cmd[16];
|
|
unsigned int rep_len;
|
|
int result;
|
|
|
|
memset(cmd, 0, 16);
|
|
cmd[0] = ZBC_IN;
|
|
cmd[1] = ZI_REPORT_ZONES;
|
|
put_unaligned_be64(lba, &cmd[2]);
|
|
put_unaligned_be32(buflen, &cmd[10]);
|
|
memset(buf, 0, buflen);
|
|
|
|
result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
|
|
buf, buflen, &sshdr,
|
|
timeout, SD_MAX_RETRIES, NULL);
|
|
if (result) {
|
|
sd_printk(KERN_ERR, sdkp,
|
|
"REPORT ZONES lba %llu failed with %d/%d\n",
|
|
(unsigned long long)lba,
|
|
host_byte(result), driver_byte(result));
|
|
return -EIO;
|
|
}
|
|
|
|
rep_len = get_unaligned_be32(&buf[0]);
|
|
if (rep_len < 64) {
|
|
sd_printk(KERN_ERR, sdkp,
|
|
"REPORT ZONES report invalid length %u\n",
|
|
rep_len);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sd_zbc_setup_report_cmnd(struct scsi_cmnd *cmd)
|
|
{
|
|
struct request *rq = cmd->request;
|
|
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
|
|
sector_t lba, sector = blk_rq_pos(rq);
|
|
unsigned int nr_bytes = blk_rq_bytes(rq);
|
|
int ret;
|
|
|
|
WARN_ON(nr_bytes == 0);
|
|
|
|
if (!sd_is_zoned(sdkp))
|
|
/* Not a zoned device */
|
|
return BLKPREP_KILL;
|
|
|
|
ret = scsi_init_io(cmd);
|
|
if (ret != BLKPREP_OK)
|
|
return ret;
|
|
|
|
cmd->cmd_len = 16;
|
|
memset(cmd->cmnd, 0, cmd->cmd_len);
|
|
cmd->cmnd[0] = ZBC_IN;
|
|
cmd->cmnd[1] = ZI_REPORT_ZONES;
|
|
lba = sectors_to_logical(sdkp->device, sector);
|
|
put_unaligned_be64(lba, &cmd->cmnd[2]);
|
|
put_unaligned_be32(nr_bytes, &cmd->cmnd[10]);
|
|
/* Do partial report for speeding things up */
|
|
cmd->cmnd[14] = ZBC_REPORT_ZONE_PARTIAL;
|
|
|
|
cmd->sc_data_direction = DMA_FROM_DEVICE;
|
|
cmd->sdb.length = nr_bytes;
|
|
cmd->transfersize = sdkp->device->sector_size;
|
|
cmd->allowed = 0;
|
|
|
|
/*
|
|
* Report may return less bytes than requested. Make sure
|
|
* to report completion on the entire initial request.
|
|
*/
|
|
rq->__data_len = nr_bytes;
|
|
|
|
return BLKPREP_OK;
|
|
}
|
|
|
|
static void sd_zbc_report_zones_complete(struct scsi_cmnd *scmd,
|
|
unsigned int good_bytes)
|
|
{
|
|
struct request *rq = scmd->request;
|
|
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
|
|
struct sg_mapping_iter miter;
|
|
struct blk_zone_report_hdr hdr;
|
|
struct blk_zone zone;
|
|
unsigned int offset, bytes = 0;
|
|
unsigned long flags;
|
|
u8 *buf;
|
|
|
|
if (good_bytes < 64)
|
|
return;
|
|
|
|
memset(&hdr, 0, sizeof(struct blk_zone_report_hdr));
|
|
|
|
sg_miter_start(&miter, scsi_sglist(scmd), scsi_sg_count(scmd),
|
|
SG_MITER_TO_SG | SG_MITER_ATOMIC);
|
|
|
|
local_irq_save(flags);
|
|
while (sg_miter_next(&miter) && bytes < good_bytes) {
|
|
|
|
buf = miter.addr;
|
|
offset = 0;
|
|
|
|
if (bytes == 0) {
|
|
/* Set the report header */
|
|
hdr.nr_zones = min_t(unsigned int,
|
|
(good_bytes - 64) / 64,
|
|
get_unaligned_be32(&buf[0]) / 64);
|
|
memcpy(buf, &hdr, sizeof(struct blk_zone_report_hdr));
|
|
offset += 64;
|
|
bytes += 64;
|
|
}
|
|
|
|
/* Parse zone descriptors */
|
|
while (offset < miter.length && hdr.nr_zones) {
|
|
WARN_ON(offset > miter.length);
|
|
buf = miter.addr + offset;
|
|
sd_zbc_parse_report(sdkp, buf, &zone);
|
|
memcpy(buf, &zone, sizeof(struct blk_zone));
|
|
offset += 64;
|
|
bytes += 64;
|
|
hdr.nr_zones--;
|
|
}
|
|
|
|
if (!hdr.nr_zones)
|
|
break;
|
|
|
|
}
|
|
sg_miter_stop(&miter);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static inline sector_t sd_zbc_zone_sectors(struct scsi_disk *sdkp)
|
|
{
|
|
return logical_to_sectors(sdkp->device, sdkp->zone_blocks);
|
|
}
|
|
|
|
static inline unsigned int sd_zbc_zone_no(struct scsi_disk *sdkp,
|
|
sector_t sector)
|
|
{
|
|
return sectors_to_logical(sdkp->device, sector) >> sdkp->zone_shift;
|
|
}
|
|
|
|
int sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
|
|
{
|
|
struct request *rq = cmd->request;
|
|
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
|
|
sector_t sector = blk_rq_pos(rq);
|
|
sector_t block = sectors_to_logical(sdkp->device, sector);
|
|
unsigned int zno = block >> sdkp->zone_shift;
|
|
|
|
if (!sd_is_zoned(sdkp))
|
|
/* Not a zoned device */
|
|
return BLKPREP_KILL;
|
|
|
|
if (sdkp->device->changed)
|
|
return BLKPREP_KILL;
|
|
|
|
if (sector & (sd_zbc_zone_sectors(sdkp) - 1))
|
|
/* Unaligned request */
|
|
return BLKPREP_KILL;
|
|
|
|
/* Do not allow concurrent reset and writes */
|
|
if (sdkp->zones_wlock &&
|
|
test_and_set_bit(zno, sdkp->zones_wlock))
|
|
return BLKPREP_DEFER;
|
|
|
|
cmd->cmd_len = 16;
|
|
memset(cmd->cmnd, 0, cmd->cmd_len);
|
|
cmd->cmnd[0] = ZBC_OUT;
|
|
cmd->cmnd[1] = ZO_RESET_WRITE_POINTER;
|
|
put_unaligned_be64(block, &cmd->cmnd[2]);
|
|
|
|
rq->timeout = SD_TIMEOUT;
|
|
cmd->sc_data_direction = DMA_NONE;
|
|
cmd->transfersize = 0;
|
|
cmd->allowed = 0;
|
|
|
|
return BLKPREP_OK;
|
|
}
|
|
|
|
int sd_zbc_setup_write_cmnd(struct scsi_cmnd *cmd)
|
|
{
|
|
struct request *rq = cmd->request;
|
|
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
|
|
sector_t sector = blk_rq_pos(rq);
|
|
sector_t zone_sectors = sd_zbc_zone_sectors(sdkp);
|
|
unsigned int zno = sd_zbc_zone_no(sdkp, sector);
|
|
|
|
/*
|
|
* Note: Checks of the alignment of the write command on
|
|
* logical blocks is done in sd.c
|
|
*/
|
|
|
|
/* Do not allow zone boundaries crossing on host-managed drives */
|
|
if (blk_queue_zoned_model(sdkp->disk->queue) == BLK_ZONED_HM &&
|
|
(sector & (zone_sectors - 1)) + blk_rq_sectors(rq) > zone_sectors)
|
|
return BLKPREP_KILL;
|
|
|
|
/*
|
|
* Do not issue more than one write at a time per
|
|
* zone. This solves write ordering problems due to
|
|
* the unlocking of the request queue in the dispatch
|
|
* path in the non scsi-mq case. For scsi-mq, this
|
|
* also avoids potential write reordering when multiple
|
|
* threads running on different CPUs write to the same
|
|
* zone (with a synchronized sequential pattern).
|
|
*/
|
|
if (sdkp->zones_wlock &&
|
|
test_and_set_bit(zno, sdkp->zones_wlock))
|
|
return BLKPREP_DEFER;
|
|
|
|
return BLKPREP_OK;
|
|
}
|
|
|
|
static void sd_zbc_unlock_zone(struct request *rq)
|
|
{
|
|
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
|
|
|
|
if (sdkp->zones_wlock) {
|
|
unsigned int zno = sd_zbc_zone_no(sdkp, blk_rq_pos(rq));
|
|
WARN_ON_ONCE(!test_bit(zno, sdkp->zones_wlock));
|
|
clear_bit_unlock(zno, sdkp->zones_wlock);
|
|
smp_mb__after_atomic();
|
|
}
|
|
}
|
|
|
|
void sd_zbc_cancel_write_cmnd(struct scsi_cmnd *cmd)
|
|
{
|
|
sd_zbc_unlock_zone(cmd->request);
|
|
}
|
|
|
|
void sd_zbc_complete(struct scsi_cmnd *cmd,
|
|
unsigned int good_bytes,
|
|
struct scsi_sense_hdr *sshdr)
|
|
{
|
|
int result = cmd->result;
|
|
struct request *rq = cmd->request;
|
|
|
|
switch (req_op(rq)) {
|
|
case REQ_OP_WRITE:
|
|
case REQ_OP_WRITE_SAME:
|
|
case REQ_OP_ZONE_RESET:
|
|
|
|
/* Unlock the zone */
|
|
sd_zbc_unlock_zone(rq);
|
|
|
|
if (!result ||
|
|
sshdr->sense_key != ILLEGAL_REQUEST)
|
|
break;
|
|
|
|
switch (sshdr->asc) {
|
|
case 0x24:
|
|
/*
|
|
* INVALID FIELD IN CDB error: For a zone reset,
|
|
* this means that a reset of a conventional
|
|
* zone was attempted. Nothing to worry about in
|
|
* this case, so be quiet about the error.
|
|
*/
|
|
if (req_op(rq) == REQ_OP_ZONE_RESET)
|
|
rq->rq_flags |= RQF_QUIET;
|
|
break;
|
|
case 0x21:
|
|
/*
|
|
* INVALID ADDRESS FOR WRITE error: It is unlikely that
|
|
* retrying write requests failed with any kind of
|
|
* alignement error will result in success. So don't.
|
|
*/
|
|
cmd->allowed = 0;
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
case REQ_OP_ZONE_REPORT:
|
|
|
|
if (!result)
|
|
sd_zbc_report_zones_complete(cmd, good_bytes);
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Read zoned block device characteristics (VPD page B6).
|
|
*/
|
|
static int sd_zbc_read_zoned_characteristics(struct scsi_disk *sdkp,
|
|
unsigned char *buf)
|
|
{
|
|
|
|
if (scsi_get_vpd_page(sdkp->device, 0xb6, buf, 64)) {
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
"Unconstrained-read check failed\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (sdkp->device->type != TYPE_ZBC) {
|
|
/* Host-aware */
|
|
sdkp->urswrz = 1;
|
|
sdkp->zones_optimal_open = get_unaligned_be64(&buf[8]);
|
|
sdkp->zones_optimal_nonseq = get_unaligned_be64(&buf[12]);
|
|
sdkp->zones_max_open = 0;
|
|
} else {
|
|
/* Host-managed */
|
|
sdkp->urswrz = buf[4] & 1;
|
|
sdkp->zones_optimal_open = 0;
|
|
sdkp->zones_optimal_nonseq = 0;
|
|
sdkp->zones_max_open = get_unaligned_be64(&buf[16]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Check reported capacity.
|
|
*/
|
|
static int sd_zbc_check_capacity(struct scsi_disk *sdkp,
|
|
unsigned char *buf)
|
|
{
|
|
sector_t lba;
|
|
int ret;
|
|
|
|
if (sdkp->rc_basis != 0)
|
|
return 0;
|
|
|
|
/* Do a report zone to get the maximum LBA to check capacity */
|
|
ret = sd_zbc_report_zones(sdkp, buf, SD_BUF_SIZE, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* The max_lba field is the capacity of this device */
|
|
lba = get_unaligned_be64(&buf[8]);
|
|
if (lba + 1 == sdkp->capacity)
|
|
return 0;
|
|
|
|
if (sdkp->first_scan)
|
|
sd_printk(KERN_WARNING, sdkp,
|
|
"Changing capacity from %llu to max LBA+1 %llu\n",
|
|
(unsigned long long)sdkp->capacity,
|
|
(unsigned long long)lba + 1);
|
|
sdkp->capacity = lba + 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define SD_ZBC_BUF_SIZE 131072
|
|
|
|
static int sd_zbc_check_zone_size(struct scsi_disk *sdkp)
|
|
{
|
|
u64 zone_blocks;
|
|
sector_t block = 0;
|
|
unsigned char *buf;
|
|
unsigned char *rec;
|
|
unsigned int buf_len;
|
|
unsigned int list_length;
|
|
int ret;
|
|
u8 same;
|
|
|
|
sdkp->zone_blocks = 0;
|
|
|
|
/* Get a buffer */
|
|
buf = kmalloc(SD_ZBC_BUF_SIZE, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
/* Do a report zone to get the same field */
|
|
ret = sd_zbc_report_zones(sdkp, buf, SD_ZBC_BUF_SIZE, 0);
|
|
if (ret) {
|
|
zone_blocks = 0;
|
|
goto out;
|
|
}
|
|
|
|
same = buf[4] & 0x0f;
|
|
if (same > 0) {
|
|
rec = &buf[64];
|
|
zone_blocks = get_unaligned_be64(&rec[8]);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Check the size of all zones: all zones must be of
|
|
* equal size, except the last zone which can be smaller
|
|
* than other zones.
|
|
*/
|
|
do {
|
|
|
|
/* Parse REPORT ZONES header */
|
|
list_length = get_unaligned_be32(&buf[0]) + 64;
|
|
rec = buf + 64;
|
|
if (list_length < SD_ZBC_BUF_SIZE)
|
|
buf_len = list_length;
|
|
else
|
|
buf_len = SD_ZBC_BUF_SIZE;
|
|
|
|
/* Parse zone descriptors */
|
|
while (rec < buf + buf_len) {
|
|
zone_blocks = get_unaligned_be64(&rec[8]);
|
|
if (sdkp->zone_blocks == 0) {
|
|
sdkp->zone_blocks = zone_blocks;
|
|
} else if (zone_blocks != sdkp->zone_blocks &&
|
|
(block + zone_blocks < sdkp->capacity
|
|
|| zone_blocks > sdkp->zone_blocks)) {
|
|
zone_blocks = 0;
|
|
goto out;
|
|
}
|
|
block += zone_blocks;
|
|
rec += 64;
|
|
}
|
|
|
|
if (block < sdkp->capacity) {
|
|
ret = sd_zbc_report_zones(sdkp, buf,
|
|
SD_ZBC_BUF_SIZE, block);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
} while (block < sdkp->capacity);
|
|
|
|
zone_blocks = sdkp->zone_blocks;
|
|
|
|
out:
|
|
kfree(buf);
|
|
|
|
if (!zone_blocks) {
|
|
if (sdkp->first_scan)
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
"Devices with non constant zone "
|
|
"size are not supported\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!is_power_of_2(zone_blocks)) {
|
|
if (sdkp->first_scan)
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
"Devices with non power of 2 zone "
|
|
"size are not supported\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (logical_to_sectors(sdkp->device, zone_blocks) > UINT_MAX) {
|
|
if (sdkp->first_scan)
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
"Zone size too large\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
sdkp->zone_blocks = zone_blocks;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sd_zbc_setup(struct scsi_disk *sdkp)
|
|
{
|
|
|
|
/* chunk_sectors indicates the zone size */
|
|
blk_queue_chunk_sectors(sdkp->disk->queue,
|
|
logical_to_sectors(sdkp->device, sdkp->zone_blocks));
|
|
sdkp->zone_shift = ilog2(sdkp->zone_blocks);
|
|
sdkp->nr_zones = sdkp->capacity >> sdkp->zone_shift;
|
|
if (sdkp->capacity & (sdkp->zone_blocks - 1))
|
|
sdkp->nr_zones++;
|
|
|
|
if (!sdkp->zones_wlock) {
|
|
sdkp->zones_wlock = kcalloc(BITS_TO_LONGS(sdkp->nr_zones),
|
|
sizeof(unsigned long),
|
|
GFP_KERNEL);
|
|
if (!sdkp->zones_wlock)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sd_zbc_read_zones(struct scsi_disk *sdkp,
|
|
unsigned char *buf)
|
|
{
|
|
sector_t capacity;
|
|
int ret = 0;
|
|
|
|
if (!sd_is_zoned(sdkp))
|
|
/*
|
|
* Device managed or normal SCSI disk,
|
|
* no special handling required
|
|
*/
|
|
return 0;
|
|
|
|
|
|
/* Get zoned block device characteristics */
|
|
ret = sd_zbc_read_zoned_characteristics(sdkp, buf);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/*
|
|
* Check for unconstrained reads: host-managed devices with
|
|
* constrained reads (drives failing read after write pointer)
|
|
* are not supported.
|
|
*/
|
|
if (!sdkp->urswrz) {
|
|
if (sdkp->first_scan)
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
"constrained reads devices are not supported\n");
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
/* Check capacity */
|
|
ret = sd_zbc_check_capacity(sdkp, buf);
|
|
if (ret)
|
|
goto err;
|
|
capacity = logical_to_sectors(sdkp->device, sdkp->capacity);
|
|
|
|
/*
|
|
* Check zone size: only devices with a constant zone size (except
|
|
* an eventual last runt zone) that is a power of 2 are supported.
|
|
*/
|
|
ret = sd_zbc_check_zone_size(sdkp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* The drive satisfies the kernel restrictions: set it up */
|
|
ret = sd_zbc_setup(sdkp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* READ16/WRITE16 is mandatory for ZBC disks */
|
|
sdkp->device->use_16_for_rw = 1;
|
|
sdkp->device->use_10_for_rw = 0;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
sdkp->capacity = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
void sd_zbc_remove(struct scsi_disk *sdkp)
|
|
{
|
|
kfree(sdkp->zones_wlock);
|
|
sdkp->zones_wlock = NULL;
|
|
}
|
|
|
|
void sd_zbc_print_zones(struct scsi_disk *sdkp)
|
|
{
|
|
if (!sd_is_zoned(sdkp) || !sdkp->capacity)
|
|
return;
|
|
|
|
if (sdkp->capacity & (sdkp->zone_blocks - 1))
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
"%u zones of %u logical blocks + 1 runt zone\n",
|
|
sdkp->nr_zones - 1,
|
|
sdkp->zone_blocks);
|
|
else
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
"%u zones of %u logical blocks\n",
|
|
sdkp->nr_zones,
|
|
sdkp->zone_blocks);
|
|
}
|