Peter Meerwald-Stadler dfd2ab8dda iio: Add Vishay VEML6070 UV A light sensor driver ... ultraviolet (UV) light sensor with I2C interface with a peak sensitivity at 355 nm strangely, chip uses two addresses 0x38 and 0x39 for LSB and MSB data, resp. datasheet: http://www.vishay.com/docs/84277/veml6070.pdf Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2016-04-19 19:58:16 +01:00
..
accel	iio: st_sensors: support open drain mode	2016-04-19 19:58:13 +01:00
adc	iio: mxs-lradc: move STMP reset out of ADC init	2016-04-19 19:58:10 +01:00
amplifiers
buffer
chemical
common	iio: st_sensors: support open drain mode	2016-04-19 19:58:13 +01:00
dac	iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs	2016-04-10 14:29:06 +01:00
dummy
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio: st_sensors: verify interrupt event to status	2016-04-19 19:58:12 +01:00
health
humidity	iio: dht11: Improve logging	2016-04-10 17:40:06 +01:00
imu	iio:adis: Add support for manual self-test flag clear	2016-04-16 13:42:43 +01:00
light	iio: Add Vishay VEML6070 UV A light sensor driver	2016-04-19 19:58:16 +01:00
magnetometer	iio: st_sensors: verify interrupt event to status	2016-04-19 19:58:12 +01:00
orientation
potentiometer	iio: potentiometer: add driver for Maxim Integrated DS1803	2016-04-10 12:34:09 +01:00
pressure	iio: st_sensors: support open drain mode	2016-04-19 19:58:13 +01:00
proximity
temperature
trigger
iio_core_trigger.h
iio_core.h
industrialio-buffer.c
industrialio-configfs.c
industrialio-core.c	iio: Add channel for UV index	2016-04-03 11:14:01 +01:00
industrialio-event.c
industrialio-sw-trigger.c
industrialio-trigger.c
industrialio-triggered-event.c
inkern.c	iio: core: Add devm_ APIs for iio_channel_{get,release}_all	2016-04-19 19:58:15 +01:00
Kconfig
Makefile