mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-13 09:26:49 +07:00
da605f5f84
The TX settings can be calibrated for particular hardware. The phy is reset by Linux, so this cannot be handled by the bootloader. The TRM mentions that the maximum resistance should be used for the DN/DP calibration in order to pass USB certification. The values for the TX registers are poorly described in the TRM. The meanings of the register values were taken from another NXP-provided document: https://community.nxp.com/message/566147#comment-566912 Acked-by: Peter Chen <peter.chen@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jaret Cantu <jaret.cantu@timesys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
658 lines
18 KiB
C
658 lines
18 KiB
C
/*
|
|
* Copyright 2012-2014 Freescale Semiconductor, Inc.
|
|
* Copyright (C) 2012 Marek Vasut <marex@denx.de>
|
|
* on behalf of DENX Software Engineering GmbH
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/stmp_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/syscon.h>
|
|
|
|
#define DRIVER_NAME "mxs_phy"
|
|
|
|
#define HW_USBPHY_PWD 0x00
|
|
#define HW_USBPHY_TX 0x10
|
|
#define HW_USBPHY_CTRL 0x30
|
|
#define HW_USBPHY_CTRL_SET 0x34
|
|
#define HW_USBPHY_CTRL_CLR 0x38
|
|
|
|
#define HW_USBPHY_DEBUG_SET 0x54
|
|
#define HW_USBPHY_DEBUG_CLR 0x58
|
|
|
|
#define HW_USBPHY_IP 0x90
|
|
#define HW_USBPHY_IP_SET 0x94
|
|
#define HW_USBPHY_IP_CLR 0x98
|
|
|
|
#define GM_USBPHY_TX_TXCAL45DP(x) (((x) & 0xf) << 16)
|
|
#define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8)
|
|
#define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0)
|
|
|
|
#define BM_USBPHY_CTRL_SFTRST BIT(31)
|
|
#define BM_USBPHY_CTRL_CLKGATE BIT(30)
|
|
#define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27)
|
|
#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26)
|
|
#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25)
|
|
#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP BIT(23)
|
|
#define BM_USBPHY_CTRL_ENIDCHG_WKUP BIT(22)
|
|
#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP BIT(21)
|
|
#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD BIT(20)
|
|
#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE BIT(19)
|
|
#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL BIT(18)
|
|
#define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15)
|
|
#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
|
|
#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
|
|
|
|
#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18))
|
|
|
|
#define BM_USBPHY_DEBUG_CLKGATE BIT(30)
|
|
|
|
/* Anatop Registers */
|
|
#define ANADIG_ANA_MISC0 0x150
|
|
#define ANADIG_ANA_MISC0_SET 0x154
|
|
#define ANADIG_ANA_MISC0_CLR 0x158
|
|
|
|
#define ANADIG_USB1_VBUS_DET_STAT 0x1c0
|
|
#define ANADIG_USB2_VBUS_DET_STAT 0x220
|
|
|
|
#define ANADIG_USB1_LOOPBACK_SET 0x1e4
|
|
#define ANADIG_USB1_LOOPBACK_CLR 0x1e8
|
|
#define ANADIG_USB2_LOOPBACK_SET 0x244
|
|
#define ANADIG_USB2_LOOPBACK_CLR 0x248
|
|
|
|
#define ANADIG_USB1_MISC 0x1f0
|
|
#define ANADIG_USB2_MISC 0x250
|
|
|
|
#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG BIT(12)
|
|
#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
|
|
|
|
#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
|
|
#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID BIT(3)
|
|
|
|
#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 BIT(2)
|
|
#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN BIT(5)
|
|
#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 BIT(2)
|
|
#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN BIT(5)
|
|
|
|
#define BM_ANADIG_USB1_MISC_RX_VPIN_FS BIT(29)
|
|
#define BM_ANADIG_USB1_MISC_RX_VMIN_FS BIT(28)
|
|
#define BM_ANADIG_USB2_MISC_RX_VPIN_FS BIT(29)
|
|
#define BM_ANADIG_USB2_MISC_RX_VMIN_FS BIT(28)
|
|
|
|
#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
|
|
|
|
/* Do disconnection between PHY and controller without vbus */
|
|
#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0)
|
|
|
|
/*
|
|
* The PHY will be in messy if there is a wakeup after putting
|
|
* bus to suspend (set portsc.suspendM) but before setting PHY to low
|
|
* power mode (set portsc.phcd).
|
|
*/
|
|
#define MXS_PHY_ABNORMAL_IN_SUSPEND BIT(1)
|
|
|
|
/*
|
|
* The SOF sends too fast after resuming, it will cause disconnection
|
|
* between host and high speed device.
|
|
*/
|
|
#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2)
|
|
|
|
/*
|
|
* IC has bug fixes logic, they include
|
|
* MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
|
|
* which are described at above flags, the RTL will handle it
|
|
* according to different versions.
|
|
*/
|
|
#define MXS_PHY_NEED_IP_FIX BIT(3)
|
|
|
|
/* Minimum and maximum values for device tree entries */
|
|
#define MXS_PHY_TX_CAL45_MIN 30
|
|
#define MXS_PHY_TX_CAL45_MAX 55
|
|
#define MXS_PHY_TX_D_CAL_MIN 79
|
|
#define MXS_PHY_TX_D_CAL_MAX 119
|
|
|
|
struct mxs_phy_data {
|
|
unsigned int flags;
|
|
};
|
|
|
|
static const struct mxs_phy_data imx23_phy_data = {
|
|
.flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
|
|
};
|
|
|
|
static const struct mxs_phy_data imx6q_phy_data = {
|
|
.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
|
|
MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
|
|
MXS_PHY_NEED_IP_FIX,
|
|
};
|
|
|
|
static const struct mxs_phy_data imx6sl_phy_data = {
|
|
.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
|
|
MXS_PHY_NEED_IP_FIX,
|
|
};
|
|
|
|
static const struct mxs_phy_data vf610_phy_data = {
|
|
.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
|
|
MXS_PHY_NEED_IP_FIX,
|
|
};
|
|
|
|
static const struct mxs_phy_data imx6sx_phy_data = {
|
|
.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
|
|
};
|
|
|
|
static const struct mxs_phy_data imx6ul_phy_data = {
|
|
.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
|
|
};
|
|
|
|
static const struct of_device_id mxs_phy_dt_ids[] = {
|
|
{ .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
|
|
{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
|
|
{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
|
|
{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
|
|
{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
|
|
{ .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
|
|
|
|
struct mxs_phy {
|
|
struct usb_phy phy;
|
|
struct clk *clk;
|
|
const struct mxs_phy_data *data;
|
|
struct regmap *regmap_anatop;
|
|
int port_id;
|
|
u32 tx_reg_set;
|
|
u32 tx_reg_mask;
|
|
};
|
|
|
|
static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
|
|
{
|
|
return mxs_phy->data == &imx6q_phy_data;
|
|
}
|
|
|
|
static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
|
|
{
|
|
return mxs_phy->data == &imx6sl_phy_data;
|
|
}
|
|
|
|
/*
|
|
* PHY needs some 32K cycles to switch from 32K clock to
|
|
* bus (such as AHB/AXI, etc) clock.
|
|
*/
|
|
static void mxs_phy_clock_switch_delay(void)
|
|
{
|
|
usleep_range(300, 400);
|
|
}
|
|
|
|
static void mxs_phy_tx_init(struct mxs_phy *mxs_phy)
|
|
{
|
|
void __iomem *base = mxs_phy->phy.io_priv;
|
|
u32 phytx;
|
|
|
|
/* Update TX register if there is anything to write */
|
|
if (mxs_phy->tx_reg_mask) {
|
|
phytx = readl(base + HW_USBPHY_TX);
|
|
phytx &= ~mxs_phy->tx_reg_mask;
|
|
phytx |= mxs_phy->tx_reg_set;
|
|
writel(phytx, base + HW_USBPHY_TX);
|
|
}
|
|
}
|
|
|
|
static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
|
|
{
|
|
int ret;
|
|
void __iomem *base = mxs_phy->phy.io_priv;
|
|
|
|
ret = stmp_reset_block(base + HW_USBPHY_CTRL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Power up the PHY */
|
|
writel(0, base + HW_USBPHY_PWD);
|
|
|
|
/*
|
|
* USB PHY Ctrl Setting
|
|
* - Auto clock/power on
|
|
* - Enable full/low speed support
|
|
*/
|
|
writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
|
|
BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
|
|
BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
|
|
BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
|
|
BM_USBPHY_CTRL_ENAUTO_PWRON_PLL |
|
|
BM_USBPHY_CTRL_ENUTMILEVEL2 |
|
|
BM_USBPHY_CTRL_ENUTMILEVEL3,
|
|
base + HW_USBPHY_CTRL_SET);
|
|
|
|
if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
|
|
writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
|
|
|
|
mxs_phy_tx_init(mxs_phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Return true if the vbus is there */
|
|
static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
|
|
{
|
|
unsigned int vbus_value = 0;
|
|
|
|
if (!mxs_phy->regmap_anatop)
|
|
return false;
|
|
|
|
if (mxs_phy->port_id == 0)
|
|
regmap_read(mxs_phy->regmap_anatop,
|
|
ANADIG_USB1_VBUS_DET_STAT,
|
|
&vbus_value);
|
|
else if (mxs_phy->port_id == 1)
|
|
regmap_read(mxs_phy->regmap_anatop,
|
|
ANADIG_USB2_VBUS_DET_STAT,
|
|
&vbus_value);
|
|
|
|
if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
|
|
{
|
|
void __iomem *base = mxs_phy->phy.io_priv;
|
|
u32 reg;
|
|
|
|
if (disconnect)
|
|
writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
|
|
base + HW_USBPHY_DEBUG_CLR);
|
|
|
|
if (mxs_phy->port_id == 0) {
|
|
reg = disconnect ? ANADIG_USB1_LOOPBACK_SET
|
|
: ANADIG_USB1_LOOPBACK_CLR;
|
|
regmap_write(mxs_phy->regmap_anatop, reg,
|
|
BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
|
|
BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
|
|
} else if (mxs_phy->port_id == 1) {
|
|
reg = disconnect ? ANADIG_USB2_LOOPBACK_SET
|
|
: ANADIG_USB2_LOOPBACK_CLR;
|
|
regmap_write(mxs_phy->regmap_anatop, reg,
|
|
BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 |
|
|
BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN);
|
|
}
|
|
|
|
if (!disconnect)
|
|
writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
|
|
base + HW_USBPHY_DEBUG_SET);
|
|
|
|
/* Delay some time, and let Linestate be SE0 for controller */
|
|
if (disconnect)
|
|
usleep_range(500, 1000);
|
|
}
|
|
|
|
static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
|
|
{
|
|
void __iomem *base = mxs_phy->phy.io_priv;
|
|
u32 phyctrl = readl(base + HW_USBPHY_CTRL);
|
|
|
|
if (IS_ENABLED(CONFIG_USB_OTG) &&
|
|
!(phyctrl & BM_USBPHY_CTRL_OTG_ID_VALUE))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
|
|
{
|
|
bool vbus_is_on = false;
|
|
|
|
/* If the SoCs don't need to disconnect line without vbus, quit */
|
|
if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
|
|
return;
|
|
|
|
/* If the SoCs don't have anatop, quit */
|
|
if (!mxs_phy->regmap_anatop)
|
|
return;
|
|
|
|
vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
|
|
|
|
if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
|
|
__mxs_phy_disconnect_line(mxs_phy, true);
|
|
else
|
|
__mxs_phy_disconnect_line(mxs_phy, false);
|
|
|
|
}
|
|
|
|
static int mxs_phy_init(struct usb_phy *phy)
|
|
{
|
|
int ret;
|
|
struct mxs_phy *mxs_phy = to_mxs_phy(phy);
|
|
|
|
mxs_phy_clock_switch_delay();
|
|
ret = clk_prepare_enable(mxs_phy->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mxs_phy_hw_init(mxs_phy);
|
|
}
|
|
|
|
static void mxs_phy_shutdown(struct usb_phy *phy)
|
|
{
|
|
struct mxs_phy *mxs_phy = to_mxs_phy(phy);
|
|
u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
|
|
BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
|
|
BM_USBPHY_CTRL_ENIDCHG_WKUP |
|
|
BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
|
|
BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
|
|
BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
|
|
BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
|
|
BM_USBPHY_CTRL_ENAUTO_PWRON_PLL;
|
|
|
|
writel(value, phy->io_priv + HW_USBPHY_CTRL_CLR);
|
|
writel(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
|
|
|
|
writel(BM_USBPHY_CTRL_CLKGATE,
|
|
phy->io_priv + HW_USBPHY_CTRL_SET);
|
|
|
|
clk_disable_unprepare(mxs_phy->clk);
|
|
}
|
|
|
|
static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
|
|
{
|
|
unsigned int line_state;
|
|
/* bit definition is the same for all controllers */
|
|
unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
|
|
dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
|
|
unsigned int reg = ANADIG_USB1_MISC;
|
|
|
|
/* If the SoCs don't have anatop, quit */
|
|
if (!mxs_phy->regmap_anatop)
|
|
return false;
|
|
|
|
if (mxs_phy->port_id == 0)
|
|
reg = ANADIG_USB1_MISC;
|
|
else if (mxs_phy->port_id == 1)
|
|
reg = ANADIG_USB2_MISC;
|
|
|
|
regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
|
|
|
|
if ((line_state & (dp_bit | dm_bit)) == dm_bit)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
static int mxs_phy_suspend(struct usb_phy *x, int suspend)
|
|
{
|
|
int ret;
|
|
struct mxs_phy *mxs_phy = to_mxs_phy(x);
|
|
bool low_speed_connection, vbus_is_on;
|
|
|
|
low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
|
|
vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
|
|
|
|
if (suspend) {
|
|
/*
|
|
* FIXME: Do not power down RXPWD1PT1 bit for low speed
|
|
* connect. The low speed connection will have problem at
|
|
* very rare cases during usb suspend and resume process.
|
|
*/
|
|
if (low_speed_connection & vbus_is_on) {
|
|
/*
|
|
* If value to be set as pwd value is not 0xffffffff,
|
|
* several 32Khz cycles are needed.
|
|
*/
|
|
mxs_phy_clock_switch_delay();
|
|
writel(0xffbfffff, x->io_priv + HW_USBPHY_PWD);
|
|
} else {
|
|
writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
|
|
}
|
|
writel(BM_USBPHY_CTRL_CLKGATE,
|
|
x->io_priv + HW_USBPHY_CTRL_SET);
|
|
clk_disable_unprepare(mxs_phy->clk);
|
|
} else {
|
|
mxs_phy_clock_switch_delay();
|
|
ret = clk_prepare_enable(mxs_phy->clk);
|
|
if (ret)
|
|
return ret;
|
|
writel(BM_USBPHY_CTRL_CLKGATE,
|
|
x->io_priv + HW_USBPHY_CTRL_CLR);
|
|
writel(0, x->io_priv + HW_USBPHY_PWD);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
|
|
{
|
|
struct mxs_phy *mxs_phy = to_mxs_phy(x);
|
|
u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
|
|
BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
|
|
BM_USBPHY_CTRL_ENIDCHG_WKUP;
|
|
if (enabled) {
|
|
mxs_phy_disconnect_line(mxs_phy, true);
|
|
writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
|
|
} else {
|
|
writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
|
|
mxs_phy_disconnect_line(mxs_phy, false);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_phy_on_connect(struct usb_phy *phy,
|
|
enum usb_device_speed speed)
|
|
{
|
|
dev_dbg(phy->dev, "%s device has connected\n",
|
|
(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
|
|
|
|
if (speed == USB_SPEED_HIGH)
|
|
writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
|
|
phy->io_priv + HW_USBPHY_CTRL_SET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_phy_on_disconnect(struct usb_phy *phy,
|
|
enum usb_device_speed speed)
|
|
{
|
|
dev_dbg(phy->dev, "%s device has disconnected\n",
|
|
(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
|
|
|
|
/* Sometimes, the speed is not high speed when the error occurs */
|
|
if (readl(phy->io_priv + HW_USBPHY_CTRL) &
|
|
BM_USBPHY_CTRL_ENHOSTDISCONDETECT)
|
|
writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
|
|
phy->io_priv + HW_USBPHY_CTRL_CLR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct mxs_phy *mxs_phy;
|
|
int ret;
|
|
const struct of_device_id *of_id;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
u32 val;
|
|
|
|
of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev);
|
|
if (!of_id)
|
|
return -ENODEV;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev,
|
|
"can't get the clock, err=%ld", PTR_ERR(clk));
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
|
|
if (!mxs_phy)
|
|
return -ENOMEM;
|
|
|
|
/* Some SoCs don't have anatop registers */
|
|
if (of_get_property(np, "fsl,anatop", NULL)) {
|
|
mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
|
|
(np, "fsl,anatop");
|
|
if (IS_ERR(mxs_phy->regmap_anatop)) {
|
|
dev_dbg(&pdev->dev,
|
|
"failed to find regmap for anatop\n");
|
|
return PTR_ERR(mxs_phy->regmap_anatop);
|
|
}
|
|
}
|
|
|
|
/* Precompute which bits of the TX register are to be updated, if any */
|
|
if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) &&
|
|
val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
|
|
/* Scale to a 4-bit value */
|
|
val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
|
|
/ (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
|
|
mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DN(~0);
|
|
mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DN(val);
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "fsl,tx-cal-45-dp-ohms", &val) &&
|
|
val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
|
|
/* Scale to a 4-bit value. */
|
|
val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
|
|
/ (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
|
|
mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DP(~0);
|
|
mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DP(val);
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "fsl,tx-d-cal", &val) &&
|
|
val >= MXS_PHY_TX_D_CAL_MIN && val <= MXS_PHY_TX_D_CAL_MAX) {
|
|
/* Scale to a 4-bit value. Round up the values and heavily
|
|
* weight the rounding by adding 2/3 of the denominator.
|
|
*/
|
|
val = ((MXS_PHY_TX_D_CAL_MAX - val) * 0xF
|
|
+ (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN) * 2/3)
|
|
/ (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN);
|
|
mxs_phy->tx_reg_mask |= GM_USBPHY_TX_D_CAL(~0);
|
|
mxs_phy->tx_reg_set |= GM_USBPHY_TX_D_CAL(val);
|
|
}
|
|
|
|
ret = of_alias_get_id(np, "usbphy");
|
|
if (ret < 0)
|
|
dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret);
|
|
mxs_phy->port_id = ret;
|
|
|
|
mxs_phy->phy.io_priv = base;
|
|
mxs_phy->phy.dev = &pdev->dev;
|
|
mxs_phy->phy.label = DRIVER_NAME;
|
|
mxs_phy->phy.init = mxs_phy_init;
|
|
mxs_phy->phy.shutdown = mxs_phy_shutdown;
|
|
mxs_phy->phy.set_suspend = mxs_phy_suspend;
|
|
mxs_phy->phy.notify_connect = mxs_phy_on_connect;
|
|
mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
|
|
mxs_phy->phy.type = USB_PHY_TYPE_USB2;
|
|
mxs_phy->phy.set_wakeup = mxs_phy_set_wakeup;
|
|
|
|
mxs_phy->clk = clk;
|
|
mxs_phy->data = of_id->data;
|
|
|
|
platform_set_drvdata(pdev, mxs_phy);
|
|
|
|
device_set_wakeup_capable(&pdev->dev, true);
|
|
|
|
return usb_add_phy_dev(&mxs_phy->phy);
|
|
}
|
|
|
|
static int mxs_phy_remove(struct platform_device *pdev)
|
|
{
|
|
struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
|
|
|
|
usb_remove_phy(&mxs_phy->phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
|
|
{
|
|
unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
|
|
|
|
/* If the SoCs don't have anatop, quit */
|
|
if (!mxs_phy->regmap_anatop)
|
|
return;
|
|
|
|
if (is_imx6q_phy(mxs_phy))
|
|
regmap_write(mxs_phy->regmap_anatop, reg,
|
|
BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
|
|
else if (is_imx6sl_phy(mxs_phy))
|
|
regmap_write(mxs_phy->regmap_anatop,
|
|
reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
|
|
}
|
|
|
|
static int mxs_phy_system_suspend(struct device *dev)
|
|
{
|
|
struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_phy_system_resume(struct device *dev)
|
|
{
|
|
struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend,
|
|
mxs_phy_system_resume);
|
|
|
|
static struct platform_driver mxs_phy_driver = {
|
|
.probe = mxs_phy_probe,
|
|
.remove = mxs_phy_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = mxs_phy_dt_ids,
|
|
.pm = &mxs_phy_pm,
|
|
},
|
|
};
|
|
|
|
static int __init mxs_phy_module_init(void)
|
|
{
|
|
return platform_driver_register(&mxs_phy_driver);
|
|
}
|
|
postcore_initcall(mxs_phy_module_init);
|
|
|
|
static void __exit mxs_phy_module_exit(void)
|
|
{
|
|
platform_driver_unregister(&mxs_phy_driver);
|
|
}
|
|
module_exit(mxs_phy_module_exit);
|
|
|
|
MODULE_ALIAS("platform:mxs-usb-phy");
|
|
MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
|
|
MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
|
|
MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
|
|
MODULE_LICENSE("GPL");
|