mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 04:25:29 +07:00
dc37374b9c
It makes no sense that some Freescale device tree files are in fsl directory while some others not. This patch move Freescale device tree files into fsl folder. To do that the following two steps are made: - Move Freescale device tree files into fsl folder. - Update the include path in these files from "fsl/*.dtsi" to "*.dtsi". Please add "fsl/" prefix when you make dtb using Makefile. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> [scottwood: fixed cuImage rule] Signed-off-by: Scott Wood <scottwood@freescale.com>
315 lines
7.5 KiB
Plaintext
315 lines
7.5 KiB
Plaintext
/*
|
|
* MPC8568E MDS Device Tree Source
|
|
*
|
|
* Copyright 2007, 2008 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/include/ "mpc8568si-pre.dtsi"
|
|
|
|
/ {
|
|
model = "MPC8568EMDS";
|
|
compatible = "MPC8568EMDS", "MPC85xxMDS";
|
|
|
|
aliases {
|
|
pci0 = &pci0;
|
|
pci1 = &pci1;
|
|
rapidio0 = &rio;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x0>;
|
|
};
|
|
|
|
lbc: localbus@e0005000 {
|
|
reg = <0x0 0xe0005000 0x0 0x1000>;
|
|
ranges = <0x0 0x0 0xfe000000 0x02000000
|
|
0x1 0x0 0xf8000000 0x00008000
|
|
0x2 0x0 0xf0000000 0x04000000
|
|
0x4 0x0 0xf8008000 0x00008000
|
|
0x5 0x0 0xf8010000 0x00008000>;
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x02000000>;
|
|
bank-width = <2>;
|
|
device-width = <2>;
|
|
};
|
|
|
|
bcsr@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8568mds-bcsr";
|
|
reg = <1 0 0x8000>;
|
|
ranges = <0 1 0 0x8000>;
|
|
|
|
bcsr5: gpio-controller@11 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8568mds-bcsr-gpio";
|
|
reg = <0x5 0x1>;
|
|
gpio-controller;
|
|
};
|
|
};
|
|
|
|
pib@4,0 {
|
|
compatible = "fsl,mpc8568mds-pib";
|
|
reg = <4 0 0x8000>;
|
|
};
|
|
|
|
pib@5,0 {
|
|
compatible = "fsl,mpc8568mds-pib";
|
|
reg = <5 0 0x8000>;
|
|
};
|
|
};
|
|
|
|
soc: soc8568@e0000000 {
|
|
ranges = <0x0 0x0 0xe0000000 0x100000>;
|
|
|
|
i2c-sleep-nexus {
|
|
i2c@3000 {
|
|
rtc@68 {
|
|
compatible = "dallas,ds1374";
|
|
reg = <0x68>;
|
|
interrupts = <3 1 0 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
enet0: ethernet@24000 {
|
|
tbi-handle = <&tbi0>;
|
|
phy-handle = <&phy2>;
|
|
};
|
|
|
|
mdio@24520 {
|
|
phy0: ethernet-phy@7 {
|
|
interrupts = <1 1 0 0>;
|
|
reg = <0x7>;
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
interrupts = <2 1 0 0>;
|
|
reg = <0x1>;
|
|
};
|
|
phy2: ethernet-phy@2 {
|
|
interrupts = <1 1 0 0>;
|
|
reg = <0x2>;
|
|
};
|
|
phy3: ethernet-phy@3 {
|
|
interrupts = <2 1 0 0>;
|
|
reg = <0x3>;
|
|
};
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@25000 {
|
|
tbi-handle = <&tbi1>;
|
|
phy-handle = <&phy3>;
|
|
sleep = <&pmc 0x00000040>;
|
|
};
|
|
|
|
mdio@25520 {
|
|
tbi1: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
par_io@e0100 {
|
|
num-ports = <7>;
|
|
|
|
pio1: ucc_pin@01 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
|
|
0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
|
|
0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
|
|
0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
|
|
0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
|
|
0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
|
|
0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
|
|
0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
|
|
0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
|
|
0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
|
|
0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
|
|
0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
|
|
0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
|
|
0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
|
|
0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
|
|
0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
|
|
0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
|
|
0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
|
|
0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
|
|
0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
|
|
0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
|
|
0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
|
|
0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */
|
|
};
|
|
|
|
pio2: ucc_pin@02 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
|
|
0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
|
|
0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
|
|
0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
|
|
0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
|
|
0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
|
|
0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
|
|
0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
|
|
0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
|
|
0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
|
|
0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
|
|
0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
|
|
0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
|
|
0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
|
|
0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
|
|
0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
|
|
0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
|
|
0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
|
|
0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
|
|
0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
|
|
0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
|
|
0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
|
|
0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */
|
|
0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */
|
|
0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */
|
|
};
|
|
};
|
|
};
|
|
|
|
qe: qe@e0080000 {
|
|
ranges = <0x0 0x0 0xe0080000 0x40000>;
|
|
reg = <0x0 0xe0080000 0x0 0x480>;
|
|
|
|
spi@4c0 {
|
|
mode = "cpu";
|
|
};
|
|
|
|
spi@500 {
|
|
mode = "cpu";
|
|
};
|
|
|
|
enet2: ucc@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk16";
|
|
pio-handle = <&pio1>;
|
|
phy-handle = <&phy0>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
enet3: ucc@3000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk16";
|
|
pio-handle = <&pio2>;
|
|
phy-handle = <&phy1>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
mdio@2120 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2120 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
/* These are the same PHYs as on
|
|
* gianfar's MDIO bus */
|
|
qe_phy0: ethernet-phy@07 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1 0 0>;
|
|
reg = <0x7>;
|
|
};
|
|
qe_phy1: ethernet-phy@01 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1 0 0>;
|
|
reg = <0x1>;
|
|
};
|
|
qe_phy2: ethernet-phy@02 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1 0 0>;
|
|
reg = <0x2>;
|
|
};
|
|
qe_phy3: ethernet-phy@03 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1 0 0>;
|
|
reg = <0x3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pci0: pci@e0008000 {
|
|
reg = <0x0 0xe0008000 0x0 0x1000>;
|
|
ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
|
|
clock-frequency = <66666666>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x12 AD18 */
|
|
0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
|
|
0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
|
|
0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
|
|
0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
|
|
|
|
/* IDSEL 0x13 AD19 */
|
|
0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
|
|
0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
|
|
0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
|
|
0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
|
|
};
|
|
|
|
/* PCI Express */
|
|
pci1: pcie@e000a000 {
|
|
ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
|
|
0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
|
|
reg = <0x0 0xe000a000 0x0 0x1000>;
|
|
pcie@0 {
|
|
ranges = <0x2000000 0x0 0xa0000000
|
|
0x2000000 0x0 0xa0000000
|
|
0x0 0x10000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x800000>;
|
|
};
|
|
};
|
|
|
|
rio: rapidio@e00c00000 {
|
|
reg = <0x0 0xe00c0000 0x0 0x20000>;
|
|
port1 {
|
|
ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
green {
|
|
gpios = <&bcsr5 1 0>;
|
|
};
|
|
|
|
amber {
|
|
gpios = <&bcsr5 2 0>;
|
|
};
|
|
|
|
red {
|
|
gpios = <&bcsr5 3 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/include/ "mpc8568si-post.dtsi"
|