linux_dsm_epyc7002/drivers/acpi/parser/psparse.c
Bob Moore 967440e3be ACPI: ACPICA 20060623
Implemented a new acpi_spinlock type for the OSL lock
interfaces.  This allows the type to be customized to
the host OS for improved efficiency (since a spinlock is
usually a very small object.)

Implemented support for "ignored" bits in the ACPI
registers.  According to the ACPI specification, these
bits should be preserved when writing the registers via
a read/modify/write cycle. There are 3 bits preserved
in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9],
and PM1_STATUS[11].
http://bugzilla.kernel.org/show_bug.cgi?id=3691

Implemented the initial deployment of new OSL mutex
interfaces.  Since some host operating systems have
separate mutex and semaphore objects, this feature was
requested. The base code now uses mutexes (and the new
mutex interfaces) wherever a binary semaphore was used
previously. However, for the current release, the mutex
interfaces are defined as macros to map them to the
existing semaphore interfaces.

Fixed several problems with the support for the control
method SyncLevel parameter. The SyncLevel now works
according to the ACPI specification and in concert with the
Mutex SyncLevel parameter, since the current SyncLevel is
a property of the executing thread. Mutual exclusion for
control methods is now implemented with a mutex instead
of a semaphore.

Fixed three instances of the use of the C shift operator
in the bitfield support code (exfldio.c) to avoid the use
of a shift value larger than the target data width. The
behavior of C compilers is undefined in this case and can
cause unpredictable results, and therefore the case must
be detected and avoided.  (Fiodor Suietov)

Added an info message whenever an SSDT or OEM table
is loaded dynamically via the Load() or LoadTable()
ASL operators. This should improve debugging capability
since it will show exactly what tables have been loaded
(beyond the tables present in the RSDT/XSDT.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-28 03:11:38 -04:00

671 lines
18 KiB
C

/******************************************************************************
*
* Module Name: psparse - Parser top level AML parse routines
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
/*
* Parse the AML and build an operation tree as most interpreters,
* like Perl, do. Parsing is done by hand rather than with a YACC
* generated parser to tightly constrain stack and dynamic memory
* usage. At the same time, parsing is kept flexible and the code
* fairly compact by parsing based on a list of AML opcode
* templates in aml_op_info[]
*/
#include <acpi/acpi.h>
#include <acpi/acparser.h>
#include <acpi/acdispat.h>
#include <acpi/amlcode.h>
#include <acpi/acnamesp.h>
#include <acpi/acinterp.h>
#define _COMPONENT ACPI_PARSER
ACPI_MODULE_NAME("psparse")
/*******************************************************************************
*
* FUNCTION: acpi_ps_get_opcode_size
*
* PARAMETERS: Opcode - An AML opcode
*
* RETURN: Size of the opcode, in bytes (1 or 2)
*
* DESCRIPTION: Get the size of the current opcode.
*
******************************************************************************/
u32 acpi_ps_get_opcode_size(u32 opcode)
{
/* Extended (2-byte) opcode if > 255 */
if (opcode > 0x00FF) {
return (2);
}
/* Otherwise, just a single byte opcode */
return (1);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_peek_opcode
*
* PARAMETERS: parser_state - A parser state object
*
* RETURN: Next AML opcode
*
* DESCRIPTION: Get next AML opcode (without incrementing AML pointer)
*
******************************************************************************/
u16 acpi_ps_peek_opcode(struct acpi_parse_state * parser_state)
{
u8 *aml;
u16 opcode;
aml = parser_state->aml;
opcode = (u16) ACPI_GET8(aml);
if (opcode == AML_EXTENDED_OP_PREFIX) {
/* Extended opcode, get the second opcode byte */
aml++;
opcode = (u16) ((opcode << 8) | ACPI_GET8(aml));
}
return (opcode);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_complete_this_op
*
* PARAMETERS: walk_state - Current State
* Op - Op to complete
*
* RETURN: Status
*
* DESCRIPTION: Perform any cleanup at the completion of an Op.
*
******************************************************************************/
acpi_status
acpi_ps_complete_this_op(struct acpi_walk_state * walk_state,
union acpi_parse_object * op)
{
union acpi_parse_object *prev;
union acpi_parse_object *next;
const struct acpi_opcode_info *parent_info;
union acpi_parse_object *replacement_op = NULL;
ACPI_FUNCTION_TRACE_PTR(ps_complete_this_op, op);
/* Check for null Op, can happen if AML code is corrupt */
if (!op) {
return_ACPI_STATUS(AE_OK); /* OK for now */
}
/* Delete this op and the subtree below it if asked to */
if (((walk_state->parse_flags & ACPI_PARSE_TREE_MASK) !=
ACPI_PARSE_DELETE_TREE)
|| (walk_state->op_info->class == AML_CLASS_ARGUMENT)) {
return_ACPI_STATUS(AE_OK);
}
/* Make sure that we only delete this subtree */
if (op->common.parent) {
prev = op->common.parent->common.value.arg;
if (!prev) {
/* Nothing more to do */
goto cleanup;
}
/*
* Check if we need to replace the operator and its subtree
* with a return value op (placeholder op)
*/
parent_info =
acpi_ps_get_opcode_info(op->common.parent->common.
aml_opcode);
switch (parent_info->class) {
case AML_CLASS_CONTROL:
break;
case AML_CLASS_CREATE:
/*
* These opcodes contain term_arg operands. The current
* op must be replaced by a placeholder return op
*/
replacement_op =
acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP);
if (!replacement_op) {
goto allocate_error;
}
break;
case AML_CLASS_NAMED_OBJECT:
/*
* These opcodes contain term_arg operands. The current
* op must be replaced by a placeholder return op
*/
if ((op->common.parent->common.aml_opcode ==
AML_REGION_OP)
|| (op->common.parent->common.aml_opcode ==
AML_DATA_REGION_OP)
|| (op->common.parent->common.aml_opcode ==
AML_BUFFER_OP)
|| (op->common.parent->common.aml_opcode ==
AML_PACKAGE_OP)
|| (op->common.parent->common.aml_opcode ==
AML_VAR_PACKAGE_OP)) {
replacement_op =
acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP);
if (!replacement_op) {
goto allocate_error;
}
} else
if ((op->common.parent->common.aml_opcode ==
AML_NAME_OP)
&& (walk_state->pass_number <=
ACPI_IMODE_LOAD_PASS2)) {
if ((op->common.aml_opcode == AML_BUFFER_OP)
|| (op->common.aml_opcode == AML_PACKAGE_OP)
|| (op->common.aml_opcode ==
AML_VAR_PACKAGE_OP)) {
replacement_op =
acpi_ps_alloc_op(op->common.
aml_opcode);
if (!replacement_op) {
goto allocate_error;
}
replacement_op->named.data =
op->named.data;
replacement_op->named.length =
op->named.length;
}
}
break;
default:
replacement_op =
acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP);
if (!replacement_op) {
goto allocate_error;
}
}
/* We must unlink this op from the parent tree */
if (prev == op) {
/* This op is the first in the list */
if (replacement_op) {
replacement_op->common.parent =
op->common.parent;
replacement_op->common.value.arg = NULL;
replacement_op->common.node = op->common.node;
op->common.parent->common.value.arg =
replacement_op;
replacement_op->common.next = op->common.next;
} else {
op->common.parent->common.value.arg =
op->common.next;
}
}
/* Search the parent list */
else
while (prev) {
/* Traverse all siblings in the parent's argument list */
next = prev->common.next;
if (next == op) {
if (replacement_op) {
replacement_op->common.parent =
op->common.parent;
replacement_op->common.value.
arg = NULL;
replacement_op->common.node =
op->common.node;
prev->common.next =
replacement_op;
replacement_op->common.next =
op->common.next;
next = NULL;
} else {
prev->common.next =
op->common.next;
next = NULL;
}
}
prev = next;
}
}
cleanup:
/* Now we can actually delete the subtree rooted at Op */
acpi_ps_delete_parse_tree(op);
return_ACPI_STATUS(AE_OK);
allocate_error:
/* Always delete the subtree, even on error */
acpi_ps_delete_parse_tree(op);
return_ACPI_STATUS(AE_NO_MEMORY);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_next_parse_state
*
* PARAMETERS: walk_state - Current state
* Op - Current parse op
* callback_status - Status from previous operation
*
* RETURN: Status
*
* DESCRIPTION: Update the parser state based upon the return exception from
* the parser callback.
*
******************************************************************************/
acpi_status
acpi_ps_next_parse_state(struct acpi_walk_state *walk_state,
union acpi_parse_object *op,
acpi_status callback_status)
{
struct acpi_parse_state *parser_state = &walk_state->parser_state;
acpi_status status = AE_CTRL_PENDING;
ACPI_FUNCTION_TRACE_PTR(ps_next_parse_state, op);
switch (callback_status) {
case AE_CTRL_TERMINATE:
/*
* A control method was terminated via a RETURN statement.
* The walk of this method is complete.
*/
parser_state->aml = parser_state->aml_end;
status = AE_CTRL_TERMINATE;
break;
case AE_CTRL_BREAK:
parser_state->aml = walk_state->aml_last_while;
walk_state->control_state->common.value = FALSE;
status = acpi_ds_result_stack_pop(walk_state);
if (ACPI_SUCCESS(status)) {
status = AE_CTRL_BREAK;
}
break;
case AE_CTRL_CONTINUE:
parser_state->aml = walk_state->aml_last_while;
status = acpi_ds_result_stack_pop(walk_state);
if (ACPI_SUCCESS(status)) {
status = AE_CTRL_CONTINUE;
}
break;
case AE_CTRL_PENDING:
parser_state->aml = walk_state->aml_last_while;
break;
#if 0
case AE_CTRL_SKIP:
parser_state->aml = parser_state->scope->parse_scope.pkg_end;
status = AE_OK;
break;
#endif
case AE_CTRL_TRUE:
/*
* Predicate of an IF was true, and we are at the matching ELSE.
* Just close out this package
*/
parser_state->aml = acpi_ps_get_next_package_end(parser_state);
status = acpi_ds_result_stack_pop(walk_state);
if (ACPI_SUCCESS(status)) {
status = AE_CTRL_PENDING;
}
break;
case AE_CTRL_FALSE:
/*
* Either an IF/WHILE Predicate was false or we encountered a BREAK
* opcode. In both cases, we do not execute the rest of the
* package; We simply close out the parent (finishing the walk of
* this branch of the tree) and continue execution at the parent
* level.
*/
parser_state->aml = parser_state->scope->parse_scope.pkg_end;
/* In the case of a BREAK, just force a predicate (if any) to FALSE */
walk_state->control_state->common.value = FALSE;
status = AE_CTRL_END;
break;
case AE_CTRL_TRANSFER:
/* A method call (invocation) -- transfer control */
status = AE_CTRL_TRANSFER;
walk_state->prev_op = op;
walk_state->method_call_op = op;
walk_state->method_call_node =
(op->common.value.arg)->common.node;
/* Will return value (if any) be used by the caller? */
walk_state->return_used =
acpi_ds_is_result_used(op, walk_state);
break;
default:
status = callback_status;
if ((callback_status & AE_CODE_MASK) == AE_CODE_CONTROL) {
status = AE_OK;
}
break;
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_parse_aml
*
* PARAMETERS: walk_state - Current state
*
*
* RETURN: Status
*
* DESCRIPTION: Parse raw AML and return a tree of ops
*
******************************************************************************/
acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state)
{
acpi_status status;
struct acpi_thread_state *thread;
struct acpi_thread_state *prev_walk_list = acpi_gbl_current_walk_list;
struct acpi_walk_state *previous_walk_state;
ACPI_FUNCTION_TRACE(ps_parse_aml);
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Entered with WalkState=%p Aml=%p size=%X\n",
walk_state, walk_state->parser_state.aml,
walk_state->parser_state.aml_size));
/* Create and initialize a new thread state */
thread = acpi_ut_create_thread_state();
if (!thread) {
acpi_ds_delete_walk_state(walk_state);
return_ACPI_STATUS(AE_NO_MEMORY);
}
walk_state->thread = thread;
/*
* If executing a method, the starting sync_level is this method's
* sync_level
*/
if (walk_state->method_desc) {
walk_state->thread->current_sync_level =
walk_state->method_desc->method.sync_level;
}
acpi_ds_push_walk_state(walk_state, thread);
/*
* This global allows the AML debugger to get a handle to the currently
* executing control method.
*/
acpi_gbl_current_walk_list = thread;
/*
* Execute the walk loop as long as there is a valid Walk State. This
* handles nested control method invocations without recursion.
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "State=%p\n", walk_state));
status = AE_OK;
while (walk_state) {
if (ACPI_SUCCESS(status)) {
/*
* The parse_loop executes AML until the method terminates
* or calls another method.
*/
status = acpi_ps_parse_loop(walk_state);
}
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Completed one call to walk loop, %s State=%p\n",
acpi_format_exception(status), walk_state));
if (status == AE_CTRL_TRANSFER) {
/*
* A method call was detected.
* Transfer control to the called control method
*/
status =
acpi_ds_call_control_method(thread, walk_state,
NULL);
if (ACPI_FAILURE(status)) {
status =
acpi_ds_method_error(status, walk_state);
}
/*
* If the transfer to the new method method call worked, a new walk
* state was created -- get it
*/
walk_state = acpi_ds_get_current_walk_state(thread);
continue;
} else if (status == AE_CTRL_TERMINATE) {
status = AE_OK;
} else if ((status != AE_OK) && (walk_state->method_desc)) {
/* Either the method parse or actual execution failed */
ACPI_ERROR_METHOD("Method parse/execution failed",
walk_state->method_node, NULL,
status);
/* Check for possible multi-thread reentrancy problem */
if ((status == AE_ALREADY_EXISTS) &&
(!walk_state->method_desc->method.mutex)) {
/*
* Method tried to create an object twice. The probable cause is
* that the method cannot handle reentrancy.
*
* The method is marked not_serialized, but it tried to create
* a named object, causing the second thread entrance to fail.
* Workaround this problem by marking the method permanently
* as Serialized.
*/
walk_state->method_desc->method.method_flags |=
AML_METHOD_SERIALIZED;
walk_state->method_desc->method.sync_level = 0;
}
}
/* We are done with this walk, move on to the parent if any */
walk_state = acpi_ds_pop_walk_state(thread);
/* Reset the current scope to the beginning of scope stack */
acpi_ds_scope_stack_clear(walk_state);
/*
* If we just returned from the execution of a control method or if we
* encountered an error during the method parse phase, there's lots of
* cleanup to do
*/
if (((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) ==
ACPI_PARSE_EXECUTE) || (ACPI_FAILURE(status))) {
acpi_ds_terminate_control_method(walk_state->
method_desc,
walk_state);
}
/* Delete this walk state and all linked control states */
acpi_ps_cleanup_scope(&walk_state->parser_state);
previous_walk_state = walk_state;
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"ReturnValue=%p, ImplicitValue=%p State=%p\n",
walk_state->return_desc,
walk_state->implicit_return_obj, walk_state));
/* Check if we have restarted a preempted walk */
walk_state = acpi_ds_get_current_walk_state(thread);
if (walk_state) {
if (ACPI_SUCCESS(status)) {
/*
* There is another walk state, restart it.
* If the method return value is not used by the parent,
* The object is deleted
*/
if (!previous_walk_state->return_desc) {
status =
acpi_ds_restart_control_method
(walk_state,
previous_walk_state->
implicit_return_obj);
} else {
/*
* We have a valid return value, delete any implicit
* return value.
*/
acpi_ds_clear_implicit_return
(previous_walk_state);
status =
acpi_ds_restart_control_method
(walk_state,
previous_walk_state->return_desc);
}
if (ACPI_SUCCESS(status)) {
walk_state->walk_type |=
ACPI_WALK_METHOD_RESTART;
}
} else {
/* On error, delete any return object */
acpi_ut_remove_reference(previous_walk_state->
return_desc);
}
}
/*
* Just completed a 1st-level method, save the final internal return
* value (if any)
*/
else if (previous_walk_state->caller_return_desc) {
if (previous_walk_state->implicit_return_obj) {
*(previous_walk_state->caller_return_desc) =
previous_walk_state->implicit_return_obj;
} else {
/* NULL if no return value */
*(previous_walk_state->caller_return_desc) =
previous_walk_state->return_desc;
}
} else {
if (previous_walk_state->return_desc) {
/* Caller doesn't want it, must delete it */
acpi_ut_remove_reference(previous_walk_state->
return_desc);
}
if (previous_walk_state->implicit_return_obj) {
/* Caller doesn't want it, must delete it */
acpi_ut_remove_reference(previous_walk_state->
implicit_return_obj);
}
}
acpi_ds_delete_walk_state(previous_walk_state);
}
/* Normal exit */
acpi_ex_release_all_mutexes(thread);
acpi_ut_delete_generic_state(ACPI_CAST_PTR
(union acpi_generic_state, thread));
acpi_gbl_current_walk_list = prev_walk_list;
return_ACPI_STATUS(status);
}