mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-13 23:26:41 +07:00
02b4e2756e
All ARMv5 and older CPUs invalidate their caches in the early assembly setup function, prior to enabling the MMU. This is because the L1 cache should not contain any data relevant to the execution of the kernel at this point; all data should have been flushed out to memory. This requirement should also be true for ARMv6 and ARMv7 CPUs - indeed, these typically do not search their caches when caching is disabled (as it needs to be when the MMU is disabled) so this change should be safe. ARMv7 allows there to be CPUs which search their caches while caching is disabled, and it's permitted that the cache is uninitialised at boot; for these, the architecture reference manual requires that an implementation specific code sequence is used immediately after reset to ensure that the cache is placed into a sane state. Such functionality is definitely outside the remit of the Linux kernel, and must be done by the SoC's firmware before _any_ CPU gets to the Linux kernel. Changing the data cache clean+invalidate to a mere invalidate allows us to get rid of a lot of platform specific hacks around this issue for their secondary CPU bringup paths - some of which were buggy. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
369 lines
8.7 KiB
C
369 lines
8.7 KiB
C
/*
|
|
* Broadcom STB CPU SMP and hotplug support for ARM
|
|
*
|
|
* Copyright (C) 2013-2014 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/printk.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/mfd/syscon.h>
|
|
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/cp15.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/smp_plat.h>
|
|
|
|
enum {
|
|
ZONE_MAN_CLKEN_MASK = BIT(0),
|
|
ZONE_MAN_RESET_CNTL_MASK = BIT(1),
|
|
ZONE_MAN_MEM_PWR_MASK = BIT(4),
|
|
ZONE_RESERVED_1_MASK = BIT(5),
|
|
ZONE_MAN_ISO_CNTL_MASK = BIT(6),
|
|
ZONE_MANUAL_CONTROL_MASK = BIT(7),
|
|
ZONE_PWR_DN_REQ_MASK = BIT(9),
|
|
ZONE_PWR_UP_REQ_MASK = BIT(10),
|
|
ZONE_BLK_RST_ASSERT_MASK = BIT(12),
|
|
ZONE_PWR_OFF_STATE_MASK = BIT(25),
|
|
ZONE_PWR_ON_STATE_MASK = BIT(26),
|
|
ZONE_DPG_PWR_STATE_MASK = BIT(28),
|
|
ZONE_MEM_PWR_STATE_MASK = BIT(29),
|
|
ZONE_RESET_STATE_MASK = BIT(31),
|
|
CPU0_PWR_ZONE_CTRL_REG = 1,
|
|
CPU_RESET_CONFIG_REG = 2,
|
|
};
|
|
|
|
static void __iomem *cpubiuctrl_block;
|
|
static void __iomem *hif_cont_block;
|
|
static u32 cpu0_pwr_zone_ctrl_reg;
|
|
static u32 cpu_rst_cfg_reg;
|
|
static u32 hif_cont_reg;
|
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
/*
|
|
* We must quiesce a dying CPU before it can be killed by the boot CPU. Because
|
|
* one or more cache may be disabled, we must flush to ensure coherency. We
|
|
* cannot use traditionl completion structures or spinlocks as they rely on
|
|
* coherency.
|
|
*/
|
|
static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
|
|
|
|
static int per_cpu_sw_state_rd(u32 cpu)
|
|
{
|
|
sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
|
|
return per_cpu(per_cpu_sw_state, cpu);
|
|
}
|
|
|
|
static void per_cpu_sw_state_wr(u32 cpu, int val)
|
|
{
|
|
dmb();
|
|
per_cpu(per_cpu_sw_state, cpu) = val;
|
|
sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
|
|
}
|
|
#else
|
|
static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
|
|
#endif
|
|
|
|
static void __iomem *pwr_ctrl_get_base(u32 cpu)
|
|
{
|
|
void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
|
|
base += (cpu_logical_map(cpu) * 4);
|
|
return base;
|
|
}
|
|
|
|
static u32 pwr_ctrl_rd(u32 cpu)
|
|
{
|
|
void __iomem *base = pwr_ctrl_get_base(cpu);
|
|
return readl_relaxed(base);
|
|
}
|
|
|
|
static void pwr_ctrl_set(unsigned int cpu, u32 val, u32 mask)
|
|
{
|
|
void __iomem *base = pwr_ctrl_get_base(cpu);
|
|
writel((readl(base) & mask) | val, base);
|
|
}
|
|
|
|
static void pwr_ctrl_clr(unsigned int cpu, u32 val, u32 mask)
|
|
{
|
|
void __iomem *base = pwr_ctrl_get_base(cpu);
|
|
writel((readl(base) & mask) & ~val, base);
|
|
}
|
|
|
|
#define POLL_TMOUT_MS 500
|
|
static int pwr_ctrl_wait_tmout(unsigned int cpu, u32 set, u32 mask)
|
|
{
|
|
const unsigned long timeo = jiffies + msecs_to_jiffies(POLL_TMOUT_MS);
|
|
u32 tmp;
|
|
|
|
do {
|
|
tmp = pwr_ctrl_rd(cpu) & mask;
|
|
if (!set == !tmp)
|
|
return 0;
|
|
} while (time_before(jiffies, timeo));
|
|
|
|
tmp = pwr_ctrl_rd(cpu) & mask;
|
|
if (!set == !tmp)
|
|
return 0;
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void cpu_rst_cfg_set(u32 cpu, int set)
|
|
{
|
|
u32 val;
|
|
val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
|
|
if (set)
|
|
val |= BIT(cpu_logical_map(cpu));
|
|
else
|
|
val &= ~BIT(cpu_logical_map(cpu));
|
|
writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
|
|
}
|
|
|
|
static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
|
|
{
|
|
const int reg_ofs = cpu_logical_map(cpu) * 8;
|
|
writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
|
|
writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
|
|
}
|
|
|
|
static void brcmstb_cpu_boot(u32 cpu)
|
|
{
|
|
/* Mark this CPU as "up" */
|
|
per_cpu_sw_state_wr(cpu, 1);
|
|
|
|
/*
|
|
* Set the reset vector to point to the secondary_startup
|
|
* routine
|
|
*/
|
|
cpu_set_boot_addr(cpu, virt_to_phys(secondary_startup));
|
|
|
|
/* Unhalt the cpu */
|
|
cpu_rst_cfg_set(cpu, 0);
|
|
}
|
|
|
|
static void brcmstb_cpu_power_on(u32 cpu)
|
|
{
|
|
/*
|
|
* The secondary cores power was cut, so we must go through
|
|
* power-on initialization.
|
|
*/
|
|
pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, 0xffffff00);
|
|
pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
|
|
pwr_ctrl_set(cpu, ZONE_RESERVED_1_MASK, -1);
|
|
|
|
pwr_ctrl_set(cpu, ZONE_MAN_MEM_PWR_MASK, -1);
|
|
|
|
if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_MEM_PWR_STATE_MASK))
|
|
panic("ZONE_MEM_PWR_STATE_MASK set timeout");
|
|
|
|
pwr_ctrl_set(cpu, ZONE_MAN_CLKEN_MASK, -1);
|
|
|
|
if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_DPG_PWR_STATE_MASK))
|
|
panic("ZONE_DPG_PWR_STATE_MASK set timeout");
|
|
|
|
pwr_ctrl_clr(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
|
|
pwr_ctrl_set(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
|
|
}
|
|
|
|
static int brcmstb_cpu_get_power_state(u32 cpu)
|
|
{
|
|
int tmp = pwr_ctrl_rd(cpu);
|
|
return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
|
|
}
|
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
|
|
static void brcmstb_cpu_die(u32 cpu)
|
|
{
|
|
v7_exit_coherency_flush(all);
|
|
|
|
per_cpu_sw_state_wr(cpu, 0);
|
|
|
|
/* Sit and wait to die */
|
|
wfi();
|
|
|
|
/* We should never get here... */
|
|
while (1)
|
|
;
|
|
}
|
|
|
|
static int brcmstb_cpu_kill(u32 cpu)
|
|
{
|
|
/*
|
|
* Ordinarily, the hardware forbids power-down of CPU0 (which is good
|
|
* because it is the boot CPU), but this is not true when using BPCM
|
|
* manual mode. Consequently, we must avoid turning off CPU0 here to
|
|
* ensure that TI2C master reset will work.
|
|
*/
|
|
if (cpu == 0) {
|
|
pr_warn("SMP: refusing to power off CPU0\n");
|
|
return 1;
|
|
}
|
|
|
|
while (per_cpu_sw_state_rd(cpu))
|
|
;
|
|
|
|
pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
|
|
pwr_ctrl_clr(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
|
|
pwr_ctrl_clr(cpu, ZONE_MAN_CLKEN_MASK, -1);
|
|
pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
|
|
pwr_ctrl_clr(cpu, ZONE_MAN_MEM_PWR_MASK, -1);
|
|
|
|
if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_MEM_PWR_STATE_MASK))
|
|
panic("ZONE_MEM_PWR_STATE_MASK clear timeout");
|
|
|
|
pwr_ctrl_clr(cpu, ZONE_RESERVED_1_MASK, -1);
|
|
|
|
if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_DPG_PWR_STATE_MASK))
|
|
panic("ZONE_DPG_PWR_STATE_MASK clear timeout");
|
|
|
|
/* Flush pipeline before resetting CPU */
|
|
mb();
|
|
|
|
/* Assert reset on the CPU */
|
|
cpu_rst_cfg_set(cpu, 1);
|
|
|
|
return 1;
|
|
}
|
|
|
|
#endif /* CONFIG_HOTPLUG_CPU */
|
|
|
|
static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
|
|
{
|
|
int rc = 0;
|
|
char *name;
|
|
struct device_node *syscon_np = NULL;
|
|
|
|
name = "syscon-cpu";
|
|
|
|
syscon_np = of_parse_phandle(np, name, 0);
|
|
if (!syscon_np) {
|
|
pr_err("can't find phandle %s\n", name);
|
|
rc = -EINVAL;
|
|
goto cleanup;
|
|
}
|
|
|
|
cpubiuctrl_block = of_iomap(syscon_np, 0);
|
|
if (!cpubiuctrl_block) {
|
|
pr_err("iomap failed for cpubiuctrl_block\n");
|
|
rc = -EINVAL;
|
|
goto cleanup;
|
|
}
|
|
|
|
rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
|
|
&cpu0_pwr_zone_ctrl_reg);
|
|
if (rc) {
|
|
pr_err("failed to read 1st entry from %s property (%d)\n", name,
|
|
rc);
|
|
rc = -EINVAL;
|
|
goto cleanup;
|
|
}
|
|
|
|
rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
|
|
&cpu_rst_cfg_reg);
|
|
if (rc) {
|
|
pr_err("failed to read 2nd entry from %s property (%d)\n", name,
|
|
rc);
|
|
rc = -EINVAL;
|
|
goto cleanup;
|
|
}
|
|
|
|
cleanup:
|
|
of_node_put(syscon_np);
|
|
return rc;
|
|
}
|
|
|
|
static int __init setup_hifcont_regs(struct device_node *np)
|
|
{
|
|
int rc = 0;
|
|
char *name;
|
|
struct device_node *syscon_np = NULL;
|
|
|
|
name = "syscon-cont";
|
|
|
|
syscon_np = of_parse_phandle(np, name, 0);
|
|
if (!syscon_np) {
|
|
pr_err("can't find phandle %s\n", name);
|
|
rc = -EINVAL;
|
|
goto cleanup;
|
|
}
|
|
|
|
hif_cont_block = of_iomap(syscon_np, 0);
|
|
if (!hif_cont_block) {
|
|
pr_err("iomap failed for hif_cont_block\n");
|
|
rc = -EINVAL;
|
|
goto cleanup;
|
|
}
|
|
|
|
/* Offset is at top of hif_cont_block */
|
|
hif_cont_reg = 0;
|
|
|
|
cleanup:
|
|
of_node_put(syscon_np);
|
|
return rc;
|
|
}
|
|
|
|
static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
|
|
{
|
|
int rc;
|
|
struct device_node *np;
|
|
char *name;
|
|
|
|
name = "brcm,brcmstb-smpboot";
|
|
np = of_find_compatible_node(NULL, NULL, name);
|
|
if (!np) {
|
|
pr_err("can't find compatible node %s\n", name);
|
|
return;
|
|
}
|
|
|
|
rc = setup_hifcpubiuctrl_regs(np);
|
|
if (rc)
|
|
return;
|
|
|
|
rc = setup_hifcont_regs(np);
|
|
if (rc)
|
|
return;
|
|
}
|
|
|
|
static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
|
|
{
|
|
/* Missing the brcm,brcmstb-smpboot DT node? */
|
|
if (!cpubiuctrl_block || !hif_cont_block)
|
|
return -ENODEV;
|
|
|
|
/* Bring up power to the core if necessary */
|
|
if (brcmstb_cpu_get_power_state(cpu) == 0)
|
|
brcmstb_cpu_power_on(cpu);
|
|
|
|
brcmstb_cpu_boot(cpu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct smp_operations brcmstb_smp_ops __initdata = {
|
|
.smp_prepare_cpus = brcmstb_cpu_ctrl_setup,
|
|
.smp_boot_secondary = brcmstb_boot_secondary,
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
.cpu_kill = brcmstb_cpu_kill,
|
|
.cpu_die = brcmstb_cpu_die,
|
|
#endif
|
|
};
|
|
|
|
CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);
|