AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 05:58:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
deb9eec696
linux_dsm_epyc7002/drivers/ide/ide-floppy.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

549 lines
14 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* IDE ATAPI floppy driver.
*
* Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
* Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net>
* Copyright (C) 2005 Bartlomiej Zolnierkiewicz
*
* This driver supports the following IDE floppy drives:
*
* LS-120/240 SuperDisk
* Iomega Zip 100/250
* Iomega PC Card Clik!/PocketZip
*
* For a historical changelog see
* Documentation/ide/ChangeLog.ide-floppy.1996-2002
*/
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/genhd.h>
#include <linux/cdrom.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
#include <linux/scatterlist.h>
#include <scsi/scsi_ioctl.h>
#include <asm/byteorder.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <asm/unaligned.h>
#include "ide-floppy.h"
/*
* After each failed packet command we issue a request sense command and retry
* the packet command IDEFLOPPY_MAX_PC_RETRIES times.
*/
#define IDEFLOPPY_MAX_PC_RETRIES 3
/* format capacities descriptor codes */
#define CAPACITY_INVALID 0x00
#define CAPACITY_UNFORMATTED 0x01
#define CAPACITY_CURRENT 0x02
#define CAPACITY_NO_CARTRIDGE 0x03
/*
* The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
* was apparently being deasserted before the unit was ready to receive data.
*/
#define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */
static int ide_floppy_callback(ide_drive_t *drive, int dsc)
{
struct ide_disk_obj *floppy = drive->driver_data;
struct ide_atapi_pc *pc = drive->pc;
struct request *rq = pc->rq;
int uptodate = pc->error ? 0 : 1;
ide_debug_log(IDE_DBG_FUNC, "enter");
if (drive->failed_pc == pc)
drive->failed_pc = NULL;
if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
blk_rq_is_scsi(rq))
uptodate = 1; /* FIXME */
else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
u8 *buf = bio_data(rq->bio);
if (!pc->error) {
floppy->sense_key = buf[2] & 0x0F;
floppy->asc = buf[12];
floppy->ascq = buf[13];
floppy->progress_indication = buf[15] & 0x80 ?
(u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
if (drive->failed_pc)
ide_debug_log(IDE_DBG_PC, "pc = %x",
drive->failed_pc->c[0]);
ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x,"
"ascq = %x", floppy->sense_key,
floppy->asc, floppy->ascq);
} else
printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
"Aborting request!\n");
}
if (ata_misc_request(rq))
scsi_req(rq)->result = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
return uptodate;
}
static void ide_floppy_report_error(struct ide_disk_obj *floppy,
struct ide_atapi_pc *pc)
{
/* suppress error messages resulting from Medium not present */
if (floppy->sense_key == 0x02 &&
floppy->asc == 0x3a &&
floppy->ascq == 0x00)
return;
printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
"asc = %2x, ascq = %2x\n",
floppy->drive->name, pc->c[0], floppy->sense_key,
floppy->asc, floppy->ascq);
}
static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive,
struct ide_cmd *cmd,
struct ide_atapi_pc *pc)
{
struct ide_disk_obj *floppy = drive->driver_data;
if (drive->failed_pc == NULL &&
pc->c[0] != GPCMD_REQUEST_SENSE)
drive->failed_pc = pc;
/* Set the current packet command */
drive->pc = pc;
if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
unsigned int done = blk_rq_bytes(drive->hwif->rq);
if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
ide_floppy_report_error(floppy, pc);
/* Giving up */
pc->error = IDE_DRV_ERROR_GENERAL;
drive->failed_pc = NULL;
drive->pc_callback(drive, 0);
ide_complete_rq(drive, BLK_STS_IOERR, done);
return ide_stopped;
}
ide_debug_log(IDE_DBG_FUNC, "retry #%d", pc->retries);
pc->retries++;
return ide_issue_pc(drive, cmd);
}
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
{
ide_init_pc(pc);
pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
pc->c[7] = 255;
pc->c[8] = 255;
pc->req_xfer = 255;
}
/* A mode sense command is used to "sense" floppy parameters. */
void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
{
u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
ide_init_pc(pc);
pc->c[0] = GPCMD_MODE_SENSE_10;
pc->c[1] = 0;
pc->c[2] = page_code;
switch (page_code) {
case IDEFLOPPY_CAPABILITIES_PAGE:
length += 12;
break;
case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
length += 32;
break;
default:
printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
}
put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
pc->req_xfer = length;
}
static void idefloppy_create_rw_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc, struct request *rq,
unsigned long sector)
{
struct ide_disk_obj *floppy = drive->driver_data;
int block = sector / floppy->bs_factor;
int blocks = blk_rq_sectors(rq) / floppy->bs_factor;
int cmd = rq_data_dir(rq);
ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks);
ide_init_pc(pc);
pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
memcpy(scsi_req(rq)->cmd, pc->c, 12);
pc->rq = rq;
if (cmd == WRITE)
pc->flags |= PC_FLAG_WRITING;
pc->flags |= PC_FLAG_DMA_OK;
}
static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
struct ide_atapi_pc *pc, struct request *rq)
{
ide_init_pc(pc);
memcpy(pc->c, scsi_req(rq)->cmd, sizeof(pc->c));
pc->rq = rq;
if (blk_rq_bytes(rq)) {
pc->flags |= PC_FLAG_DMA_OK;
if (rq_data_dir(rq) == WRITE)
pc->flags |= PC_FLAG_WRITING;
}
}
static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
struct request *rq, sector_t block)
{
struct ide_disk_obj *floppy = drive->driver_data;
struct ide_cmd cmd;
struct ide_atapi_pc *pc;
ide_debug_log(IDE_DBG_FUNC, "enter, cmd: 0x%x\n", rq->cmd[0]);
if (drive->debug_mask & IDE_DBG_RQ)
blk_dump_rq_flags(rq, (rq->rq_disk
? rq->rq_disk->disk_name
: "dev?"));
if (scsi_req(rq)->result >= ERROR_MAX) {
if (drive->failed_pc) {
ide_floppy_report_error(floppy, drive->failed_pc);
drive->failed_pc = NULL;
} else
printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
if (ata_misc_request(rq)) {
scsi_req(rq)->result = 0;
ide_complete_rq(drive, BLK_STS_OK, blk_rq_bytes(rq));
return ide_stopped;
} else
goto out_end;
}
switch (req_op(rq)) {
default:
if (((long)blk_rq_pos(rq) % floppy->bs_factor) ||
(blk_rq_sectors(rq) % floppy->bs_factor)) {
printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
drive->name);
goto out_end;
}
pc = &floppy->queued_pc;
idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
break;
case REQ_OP_SCSI_IN:
case REQ_OP_SCSI_OUT:
pc = &floppy->queued_pc;
idefloppy_blockpc_cmd(floppy, pc, rq);
break;
case REQ_OP_DRV_IN:
case REQ_OP_DRV_OUT:
switch (ide_req(rq)->type) {
case ATA_PRIV_MISC:
case ATA_PRIV_SENSE:
pc = (struct ide_atapi_pc *)rq->special;
break;
default:
BUG();
}
}
ide_prep_sense(drive, rq);
memset(&cmd, 0, sizeof(cmd));
if (rq_data_dir(rq))
cmd.tf_flags |= IDE_TFLAG_WRITE;
cmd.rq = rq;
if (!blk_rq_is_passthrough(rq) || blk_rq_bytes(rq)) {
ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
ide_map_sg(drive, &cmd);
}
pc->rq = rq;
return ide_floppy_issue_pc(drive, &cmd, pc);
out_end:
drive->failed_pc = NULL;
if (blk_rq_is_passthrough(rq) && scsi_req(rq)->result == 0)
scsi_req(rq)->result = -EIO;
ide_complete_rq(drive, BLK_STS_IOERR, blk_rq_bytes(rq));
return ide_stopped;
}
/*
* Look at the flexible disk page parameters. We ignore the CHS capacity
* parameters and use the LBA parameters instead.
*/
static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
struct ide_disk_obj *floppy = drive->driver_data;
struct gendisk *disk = floppy->disk;
u8 *page, buf[40];
int capacity, lba_capacity;
u16 transfer_rate, sector_size, cyls, rpm;
u8 heads, sectors;
ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
if (ide_queue_pc_tail(drive, disk, pc, buf, pc->req_xfer)) {
printk(KERN_ERR PFX "Can't get flexible disk page params\n");
return 1;
}
if (buf[3] & 0x80)
drive->dev_flags |= IDE_DFLAG_WP;
else
drive->dev_flags &= ~IDE_DFLAG_WP;
set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
page = &buf[8];
transfer_rate = be16_to_cpup((__be16 *)&buf[8 + 2]);
sector_size = be16_to_cpup((__be16 *)&buf[8 + 6]);
cyls = be16_to_cpup((__be16 *)&buf[8 + 8]);
rpm = be16_to_cpup((__be16 *)&buf[8 + 28]);
heads = buf[8 + 4];
sectors = buf[8 + 5];
capacity = cyls * heads * sectors * sector_size;
if (memcmp(page, &floppy->flexible_disk_page, 32))
printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
"%d sector size, %d rpm\n",
drive->name, capacity / 1024, cyls, heads,
sectors, transfer_rate / 8, sector_size, rpm);
memcpy(&floppy->flexible_disk_page, page, 32);
drive->bios_cyl = cyls;
drive->bios_head = heads;
drive->bios_sect = sectors;
lba_capacity = floppy->blocks * floppy->block_size;
if (capacity < lba_capacity) {
printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
"bytes, but the drive only handles %d\n",
drive->name, lba_capacity, capacity);
floppy->blocks = floppy->block_size ?
capacity / floppy->block_size : 0;
drive->capacity64 = floppy->blocks * floppy->bs_factor;
}
return 0;
}
/*
* Determine if a media is present in the floppy drive, and if so, its LBA
* capacity.
*/
static int ide_floppy_get_capacity(ide_drive_t *drive)
{
struct ide_disk_obj *floppy = drive->driver_data;
struct gendisk *disk = floppy->disk;
struct ide_atapi_pc pc;
u8 *cap_desc;
u8 pc_buf[256], header_len, desc_cnt;
int i, rc = 1, blocks, length;
ide_debug_log(IDE_DBG_FUNC, "enter");
drive->bios_cyl = 0;
drive->bios_head = drive->bios_sect = 0;
floppy->blocks = 0;
floppy->bs_factor = 1;
drive->capacity64 = 0;
ide_floppy_create_read_capacity_cmd(&pc);
if (ide_queue_pc_tail(drive, disk, &pc, pc_buf, pc.req_xfer)) {
printk(KERN_ERR PFX "Can't get floppy parameters\n");
return 1;
}
header_len = pc_buf[3];
cap_desc = &pc_buf[4];
desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
for (i = 0; i < desc_cnt; i++) {
unsigned int desc_start = 4 + i*8;
blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]);
length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]);
ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
"%d sector size",
i, blocks * length / 1024,
blocks, length);
if (i)
continue;
/*
* the code below is valid only for the 1st descriptor, ie i=0
*/
switch (pc_buf[desc_start + 4] & 0x03) {
/* Clik! drive returns this instead of CAPACITY_CURRENT */
case CAPACITY_UNFORMATTED:
if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
/*
* If it is not a clik drive, break out
* (maintains previous driver behaviour)
*/
break;
case CAPACITY_CURRENT:
/* Normal Zip/LS-120 disks */
if (memcmp(cap_desc, &floppy->cap_desc, 8))
printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d "
"sector size\n",
drive->name, blocks * length / 1024,
blocks, length);
memcpy(&floppy->cap_desc, cap_desc, 8);
if (!length || length % 512) {
printk(KERN_NOTICE PFX "%s: %d bytes block size"
" not supported\n", drive->name, length);
} else {
floppy->blocks = blocks;
floppy->block_size = length;
floppy->bs_factor = length / 512;
if (floppy->bs_factor != 1)
printk(KERN_NOTICE PFX "%s: Warning: "
"non 512 bytes block size not "
"fully supported\n",
drive->name);
drive->capacity64 =
floppy->blocks * floppy->bs_factor;
rc = 0;
}
break;
case CAPACITY_NO_CARTRIDGE:
/*
* This is a KERN_ERR so it appears on screen
* for the user to see
*/
printk(KERN_ERR PFX "%s: No disk in drive\n",
drive->name);
break;
case CAPACITY_INVALID:
printk(KERN_ERR PFX "%s: Invalid capacity for disk "
"in drive\n", drive->name);
break;
}
ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d",
pc_buf[desc_start + 4] & 0x03);
}
/* Clik! disk does not support get_flexible_disk_page */
if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
(void) ide_floppy_get_flexible_disk_page(drive, &pc);
return rc;
}
static void ide_floppy_setup(ide_drive_t *drive)
{
struct ide_disk_obj *floppy = drive->driver_data;
u16 *id = drive->id;
drive->pc_callback = ide_floppy_callback;
/*
* We used to check revisions here. At this point however I'm giving up.
* Just assume they are all broken, its easier.
*
* The actual reason for the workarounds was likely a driver bug after
* all rather than a firmware bug, and the workaround below used to hide
* it. It should be fixed as of version 1.9, but to be on the safe side
* we'll leave the limitation below for the 2.2.x tree.
*/
if (strstarts((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI")) {
drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
drive->pc_delay = IDEFLOPPY_PC_DELAY;
blk_queue_max_hw_sectors(drive->queue, 64);
}
/*
* Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
* nasty clicking noises without it, so please don't remove this.
*/
if (strstarts((char *)&id[ATA_ID_PROD], "IOMEGA Clik!")) {
blk_queue_max_hw_sectors(drive->queue, 64);
drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
/* IOMEGA Clik! drives do not support lock/unlock commands */
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
}
(void) ide_floppy_get_capacity(drive);
ide_proc_register_driver(drive, floppy->driver);
drive->dev_flags |= IDE_DFLAG_ATTACH;
}
static void ide_floppy_flush(ide_drive_t *drive)
{
}
static int ide_floppy_init_media(ide_drive_t *drive, struct gendisk *disk)
{
int ret = 0;
if (ide_do_test_unit_ready(drive, disk))
ide_do_start_stop(drive, disk, 1);
ret = ide_floppy_get_capacity(drive);
set_capacity(disk, ide_gd_capacity(drive));
return ret;
}
const struct ide_disk_ops ide_atapi_disk_ops = {
.check = ide_check_atapi_device,
.get_capacity = ide_floppy_get_capacity,
.setup = ide_floppy_setup,
.flush = ide_floppy_flush,
.init_media = ide_floppy_init_media,
.set_doorlock = ide_set_media_lock,
.do_request = ide_floppy_do_request,
.ioctl = ide_floppy_ioctl,
};
Reference in New Issue View Git Blame Copy Permalink