linux_dsm_epyc7002/arch/um/kernel/dyn.lds.S
Johannes Berg 87c9366e17 Revert "um: Enable CONFIG_CONSTRUCTORS"
This reverts commit 786b2384bf ("um: Enable CONFIG_CONSTRUCTORS").

There are two issues with this commit, uncovered by Anton in tests
on some (Debian) systems:

1) I completely forgot to call any constructors if CONFIG_CONSTRUCTORS
   isn't set. Don't recall now if it just wasn't needed on my system, or
   if I never tested this case.

2) With that fixed, it works - with CONFIG_CONSTRUCTORS *unset*. If I
   set CONFIG_CONSTRUCTORS, it fails again, which isn't totally
   unexpected since whatever wanted to run is likely to have to run
   before the kernel init etc. that calls the constructors in this case.

Basically, some constructors that gcc emits (libc has?) need to run
very early during init; the failure mode otherwise was that the ptrace
fork test already failed:

----------------------
$ ./linux mem=512M
Core dump limits :
	soft - 0
	hard - NONE
Checking that ptrace can change system call numbers...check_ptrace : child exited with exitcode 6, while expecting 0; status 0x67f
Aborted
----------------------

Thinking more about this, it's clear that we simply cannot support
CONFIG_CONSTRUCTORS in UML. All the cases we need now (gcov, kasan)
involve not use of the __attribute__((constructor)), but instead
some constructor code/entry generated by gcc. Therefore, we cannot
distinguish between kernel constructors and system constructors.

Thus, revert this commit.

Cc: stable@vger.kernel.org [5.4+]
Fixes: 786b2384bf ("um: Enable CONFIG_CONSTRUCTORS")
Reported-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>

Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-19 22:42:06 +01:00

172 lines
5.2 KiB
ArmAsm

#include <asm/vmlinux.lds.h>
#include <asm/page.h>
OUTPUT_FORMAT(ELF_FORMAT)
OUTPUT_ARCH(ELF_ARCH)
ENTRY(_start)
jiffies = jiffies_64;
SECTIONS
{
PROVIDE (__executable_start = START);
. = START + SIZEOF_HEADERS;
.interp : { *(.interp) }
__binary_start = .;
. = ALIGN(4096); /* Init code and data */
_text = .;
INIT_TEXT_SECTION(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
/* Read-only sections, merged into text segment: */
.hash : { *(.hash) }
.gnu.hash : { *(.gnu.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.gnu.version : { *(.gnu.version) }
.gnu.version_d : { *(.gnu.version_d) }
.gnu.version_r : { *(.gnu.version_r) }
.rel.init : { *(.rel.init) }
.rela.init : { *(.rela.init) }
.rel.text : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
.rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
.rel.fini : { *(.rel.fini) }
.rela.fini : { *(.rela.fini) }
.rel.rodata : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
.rela.rodata : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
.rel.data : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
.rela.data : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
.rel.tdata : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
.rela.tdata : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
.rel.tbss : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
.rela.tbss : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.bss : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
.rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
.rel.plt : {
*(.rel.plt)
PROVIDE_HIDDEN(__rel_iplt_start = .);
*(.rel.iplt)
PROVIDE_HIDDEN(__rel_iplt_end = .);
}
.rela.plt : {
*(.rela.plt)
PROVIDE_HIDDEN(__rela_iplt_start = .);
*(.rela.iplt)
PROVIDE_HIDDEN(__rela_iplt_end = .);
}
.init : {
KEEP (*(.init))
} =0x90909090
.plt : { *(.plt) }
.text : {
_stext = .;
TEXT_TEXT
SCHED_TEXT
CPUIDLE_TEXT
LOCK_TEXT
IRQENTRY_TEXT
SOFTIRQENTRY_TEXT
*(.fixup)
*(.stub .text.* .gnu.linkonce.t.*)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
. = ALIGN(PAGE_SIZE);
} =0x90909090
. = ALIGN(PAGE_SIZE);
.syscall_stub : {
__syscall_stub_start = .;
*(.__syscall_stub*)
__syscall_stub_end = .;
}
.fini : {
KEEP (*(.fini))
} =0x90909090
.kstrtab : { *(.kstrtab) }
#include <asm/common.lds.S>
__init_begin = .;
init.data : { INIT_DATA }
__init_end = .;
/* Ensure the __preinit_array_start label is properly aligned. We
could instead move the label definition inside the section, but
the linker would then create the section even if it turns out to
be empty, which isn't pretty. */
. = ALIGN(32 / 8);
.preinit_array : { *(.preinit_array) }
.init_array : { *(.init_array) }
.fini_array : { *(.fini_array) }
.data : {
INIT_TASK_DATA(KERNEL_STACK_SIZE)
. = ALIGN(KERNEL_STACK_SIZE);
*(.data..init_irqstack)
DATA_DATA
*(.data.* .gnu.linkonce.d.*)
SORT(CONSTRUCTORS)
}
.data1 : { *(.data1) }
.tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
.tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
.eh_frame : { KEEP (*(.eh_frame)) }
.gcc_except_table : { *(.gcc_except_table) }
.dynamic : { *(.dynamic) }
.ctors : {
/* gcc uses crtbegin.o to find the start of
the constructors, so we make sure it is
first. Because this is a wildcard, it
doesn't matter if the user does not
actually link against crtbegin.o; the
linker won't look for a file to match a
wildcard. The wildcard also means that it
doesn't matter which directory crtbegin.o
is in. */
KEEP (*crtbegin.o(.ctors))
/* We don't want to include the .ctor section from
from the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
}
.dtors : {
KEEP (*crtbegin.o(.dtors))
KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
}
.jcr : { KEEP (*(.jcr)) }
.got : { *(.got.plt) *(.got) }
_edata = .;
PROVIDE (edata = .);
.bss : {
__bss_start = .;
*(.dynbss)
*(.bss .bss.* .gnu.linkonce.b.*)
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
. = ALIGN(32 / 8);
. = ALIGN(32 / 8);
}
__bss_stop = .;
_end = .;
PROVIDE (end = .);
STABS_DEBUG
DWARF_DEBUG
DISCARDS
}