linux_dsm_epyc7002/drivers/gpu/drm/i915/Kconfig.debug
Dave Airlie 539c475dad Higlights here goes to many PSR fixes and improvements; to the Ice lake work with
power well support and begin of DSI support addition. Also there were many improvements
 on execlists and interrupts for minimal latency on command submission; and many fixes
 on selftests, mostly caught by our CI.
 
 General driver:
 - Clean-up on aux irq (Lucas)
 - Mark expected switch fall-through for dealing with static analysis tools (Gustavo)
 
 Gem:
 - Different fixes for GuC (Chris, Anusha, Michal)
 - Avoid self-relocation BIAS if no relocation (Chris)
 - Improve debugging cases in on EINVAL return and vma allocation (Chris)
 - Fixes and improvements on context destroying and freeing (Chris)
 - Wait for engines to idle before retiring (Chris)
 - Many improvements on execlists and interrupts for minimal latency on command submission (Chris)
 - Many fixes in selftests, specially on cases highlighted on CI (Chris)
 - Other fixes and improvements around GGTT (Chris)
 - Prevent background reaping of active objects (Chris)
 
 Display:
 - Parallel modeset cleanup to fix driver reset (Chris)
 - Get AUX power domain for DP main link (Imre)
 - Clean-up on PSR unused func pointers (Rodrigo)
 - Many PSR/PSR2 fixes and improvements (DK, Jose, Tarun)
 - Add a PSR1 live status (Vathsala)
 - Replace old drm_*_{un/reference} with put,get functions (Thomas)
 - FBC fixes (Maarten)
 - Abstract and document the usage of picking macros (Jani)
 - Remove unnecessary check for unsupported modifiers for NV12. (DK)
 - Interrupt fixes for display (Ville)
 - Clean up on sdvo code (Ville)
 - Clean up on current DSI code (Jani)
 - Remove support for legacy debugfs crc interface (Maarten)
 - Simplify get_encoder_power_domains (Imre)
 
 Icelake:
 - MG PLL fixes (Imre)
 - Add hw workaround for alpha blending (Vandita)
 - Add power well support (Imre)
 - Add Interrupt Support (Anusha)
 - Start to add support for DSI on Ice Lake (Madhav)
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbQ+ShAAoJEPpiX2QO6xPKas0H/igf9RFubtkMK7gHTef4FM+d
 Bg+Qaq+O1vXlS/gidimL4NsVp1FxkejuCab0IffbTMvvjY0mv5NUA3kiIreAB0QZ
 XO2hXr4fjjOINAQrdv5wiVMOqRjDws+fPgFFgZ8s5h1aJbofO27fjY/1MNtHwcA0
 8VgtABpk+D3mkWvI8VTL0jCjYk2KocEvqUciz/Y7SQcPGV1iYFXqgBt5PR//rSvP
 DU3u4R3KJGLDFbQwbe3uz2GxMfodAI6ijrqFeiizNSVqZORdTwnWlzKi6b6Cj9gl
 SuleZacHPfv/+Ia7jmbmBqJEqi2GiAs948ne8QWL5/hsB9MMFO/UzwX/wYLNrP4=
 =w6zC
 -----END PGP SIGNATURE-----

Merge tag 'drm-intel-next-2018-07-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Higlights here goes to many PSR fixes and improvements; to the Ice lake work with
power well support and begin of DSI support addition. Also there were many improvements
on execlists and interrupts for minimal latency on command submission; and many fixes
on selftests, mostly caught by our CI.

General driver:
- Clean-up on aux irq (Lucas)
- Mark expected switch fall-through for dealing with static analysis tools (Gustavo)

Gem:
- Different fixes for GuC (Chris, Anusha, Michal)
- Avoid self-relocation BIAS if no relocation (Chris)
- Improve debugging cases in on EINVAL return and vma allocation (Chris)
- Fixes and improvements on context destroying and freeing (Chris)
- Wait for engines to idle before retiring (Chris)
- Many improvements on execlists and interrupts for minimal latency on command submission (Chris)
- Many fixes in selftests, specially on cases highlighted on CI (Chris)
- Other fixes and improvements around GGTT (Chris)
- Prevent background reaping of active objects (Chris)

Display:
- Parallel modeset cleanup to fix driver reset (Chris)
- Get AUX power domain for DP main link (Imre)
- Clean-up on PSR unused func pointers (Rodrigo)
- Many PSR/PSR2 fixes and improvements (DK, Jose, Tarun)
- Add a PSR1 live status (Vathsala)
- Replace old drm_*_{un/reference} with put,get functions (Thomas)
- FBC fixes (Maarten)
- Abstract and document the usage of picking macros (Jani)
- Remove unnecessary check for unsupported modifiers for NV12. (DK)
- Interrupt fixes for display (Ville)
- Clean up on sdvo code (Ville)
- Clean up on current DSI code (Jani)
- Remove support for legacy debugfs crc interface (Maarten)
- Simplify get_encoder_power_domains (Imre)

Icelake:
- MG PLL fixes (Imre)
- Add hw workaround for alpha blending (Vandita)
- Add power well support (Imre)
- Add Interrupt Support (Anusha)
- Start to add support for DSI on Ice Lake (Madhav)

Signed-off-by: Dave Airlie <airlied@redhat.com>

# gpg: Signature made Tue 10 Jul 2018 08:41:37 AM AEST
# gpg:                using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg:                 aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C  E2A3 FA62 5F64 0EEB 13CA
Link: https://patchwork.freedesktop.org/patch/msgid/20180710234349.GA16562@intel.com
2018-07-19 05:46:30 +10:00

170 lines
5.4 KiB
Plaintext

config DRM_I915_WERROR
bool "Force GCC to throw an error instead of a warning when compiling"
# As this may inadvertently break the build, only allow the user
# to shoot oneself in the foot iff they aim really hard
depends on EXPERT
# We use the dependency on !COMPILE_TEST to not be enabled in
# allmodconfig or allyesconfig configurations
depends on !COMPILE_TEST
default n
help
Add -Werror to the build flags for (and only for) i915.ko.
Do not enable this unless you are writing code for the i915.ko module.
Recommended for driver developers only.
If in doubt, say "N".
config DRM_I915_DEBUG
bool "Enable additional driver debugging"
depends on DRM_I915
select DEBUG_FS
select PREEMPT_COUNT
select I2C_CHARDEV
select DRM_DP_AUX_CHARDEV
select X86_MSR # used by igt/pm_rpm
select DRM_VGEM # used by igt/prime_vgem (dmabuf interop checks)
select DRM_DEBUG_MM if DRM=y
select STACKDEPOT if DRM=y # for DRM_DEBUG_MM
select DRM_DEBUG_SELFTEST
select SW_SYNC # signaling validation framework (igt/syncobj*)
select DRM_I915_SW_FENCE_DEBUG_OBJECTS
select DRM_I915_SELFTEST
default n
help
Choose this option to turn on extra driver debugging that may affect
performance but will catch some internal issues.
Recommended for driver developers only.
If in doubt, say "N".
config DRM_I915_DEBUG_GEM
bool "Insert extra checks into the GEM internals"
default n
depends on DRM_I915_WERROR
help
Enable extra sanity checks (including BUGs) along the GEM driver
paths that may slow the system down and if hit hang the machine.
Recommended for driver developers only.
If in doubt, say "N".
config DRM_I915_ERRLOG_GEM
bool "Insert extra logging (very verbose) for common GEM errors"
default n
depends on DRM_I915_DEBUG_GEM
help
Enable additional logging that may help track down the cause of
principally userspace errors.
Recommended for driver developers only.
If in doubt, say "N".
config DRM_I915_TRACE_GEM
bool "Insert extra ftrace output from the GEM internals"
depends on DRM_I915_DEBUG_GEM
select TRACING
default n
help
Enable additional and verbose debugging output that will spam
ordinary tests, but may be vital for post-mortem debugging when
used with /proc/sys/kernel/ftrace_dump_on_oops
Recommended for driver developers only.
If in doubt, say "N".
config DRM_I915_SW_FENCE_DEBUG_OBJECTS
bool "Enable additional driver debugging for fence objects"
depends on DRM_I915
select DEBUG_OBJECTS
default n
help
Choose this option to turn on extra driver debugging that may affect
performance but will catch some internal issues.
Recommended for driver developers only.
If in doubt, say "N".
config DRM_I915_SW_FENCE_CHECK_DAG
bool "Enable additional driver debugging for detecting dependency cycles"
depends on DRM_I915
default n
help
Choose this option to turn on extra driver debugging that may affect
performance but will catch some internal issues.
Recommended for driver developers only.
If in doubt, say "N".
config DRM_I915_DEBUG_GUC
bool "Enable additional driver debugging for GuC"
depends on DRM_I915
default n
help
Choose this option to turn on extra driver debugging that may affect
performance but will help resolve GuC related issues.
Recommended for driver developers only.
If in doubt, say "N".
config DRM_I915_SELFTEST
bool "Enable selftests upon driver load"
depends on DRM_I915
default n
select FAULT_INJECTION
select PRIME_NUMBERS
help
Choose this option to allow the driver to perform selftests upon
loading; also requires the i915.selftest=1 module parameter. To
exit the module after running the selftests (i.e. to prevent normal
module initialisation afterwards) use i915.selftest=-1.
Recommended for driver developers only.
If in doubt, say "N".
config DRM_I915_SELFTEST_BROKEN
bool "Enable broken and dangerous selftests"
depends on DRM_I915_SELFTEST
depends on BROKEN
default n
help
This option enables the execution of selftests that are "dangerous"
and may trigger unintended HW side-effects as they break strict
rules given in the HW specification. For science.
Recommended for masochistic driver developers only.
If in doubt, say "N".
config DRM_I915_LOW_LEVEL_TRACEPOINTS
bool "Enable low level request tracing events"
depends on DRM_I915
default n
help
Choose this option to turn on low level request tracing events.
This provides the ability to precisely monitor engine utilisation
and also analyze the request dependency resolving timeline.
If in doubt, say "N".
config DRM_I915_DEBUG_VBLANK_EVADE
bool "Enable extra debug warnings for vblank evasion"
depends on DRM_I915
default n
help
Choose this option to turn on extra debug warnings for the
vblank evade mechanism. This gives a warning every time the
the deadline allotted for the vblank evade critical section
is exceeded, even if there isn't an actual risk of missing
the vblank.
If in doubt, say "N".