..
fsl-ls208xa-qds.dtsi
arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
2018-12-16 16:24:01 +08:00
fsl-ls208xa-rdb.dtsi
arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB
2020-01-09 15:32:29 +08:00
fsl-ls208xa.dtsi
arm64: dts: layerscape: add iommu-map property to pci nodes
2020-03-11 16:15:48 +08:00
fsl-ls1012a-frdm.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls1012a-frwy.dts
arm64: dts: ls1012a: Add FRWY-LS1012A board support
2018-12-08 10:28:37 +08:00
fsl-ls1012a-oxalis.dts
arm64: dts: freescale: Enable PCI-E controller for Oxalis board
2019-03-20 20:58:26 +08:00
fsl-ls1012a-qds.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls1012a-rdb.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls1012a.dtsi
pci-v5.4-changes
2019-09-23 19:16:01 -07:00
fsl-ls1028a-kontron-kbox-a-230-ls.dts
arm64: dts: ls1028a: disable the felix switch by default
2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var2.dts
arm64: dts: ls1028a: disable the felix switch by default
2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var3-ads2.dts
arm64: dts: ls1028a: sl28: fix on-board EEPROMS
2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var4.dts
arm64: dts: ls1028: sl28: explicitly enable network ports
2020-03-11 15:58:13 +08:00
fsl-ls1028a-kontron-sl28.dts
arm64: dts: ls1028a: sl28: fix on-board EEPROMS
2020-03-16 16:16:00 +08:00
fsl-ls1028a-qds.dts
arm64: dts: ls1028a: disable all enetc ports by default
2020-03-11 15:58:13 +08:00
fsl-ls1028a-rdb.dts
arm64: dts: ls1028a: disable the felix switch by default
2020-03-16 16:16:00 +08:00
fsl-ls1028a.dtsi
arm64: dts: ls1028a: Specify the DMA channels for the DSPI controllers
2020-04-20 22:36:24 +08:00
fsl-ls1043-post.dtsi
arm64: dts: ls1043a: FMan erratum A050385
2020-03-06 21:55:32 -08:00
fsl-ls1043a-qds.dts
arm64: dts: fsl: use a generic node name for m25p80 flashes
2019-01-11 17:13:04 +08:00
fsl-ls1043a-rdb.dts
arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-id
2020-03-16 14:58:32 -07:00
fsl-ls1043a.dtsi
arm64: dts: fsl: Remove num-lanes property from PCIe nodes
2019-08-22 18:25:55 +01:00
fsl-ls1046-post.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls1046a-frwy.dts
arm64: dts: ls1046a: Add QSPI node for ls1046afrwy
2019-12-11 11:13:37 +08:00
fsl-ls1046a-qds.dts
arm64: dts: fsl: use a generic node name for m25p80 flashes
2019-01-11 17:13:04 +08:00
fsl-ls1046a-rdb.dts
arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode
2020-03-16 14:58:33 -07:00
fsl-ls1046a.dtsi
arm64: dts: fsl: Remove num-lanes property from PCIe nodes
2019-08-22 18:25:55 +01:00
fsl-ls1088a-qds.dts
arm64: dts: ls1088a: Add QSPI support for NXP LS1088
2019-12-11 11:13:44 +08:00
fsl-ls1088a-rdb.dts
arm64: dts: ls1088a: support eMMC HS200 speed mode for RDB board
2020-02-14 11:39:40 +08:00
fsl-ls1088a.dtsi
arm64: dts: layerscape: add iommu-map property to pci nodes
2020-03-11 16:15:48 +08:00
fsl-ls2080a-qds.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls2080a-rdb.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls2080a-simu.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls2080a.dtsi
arm64: dts: freescale: Add missing cooling device properties for CPUs
2018-07-03 15:01:09 +08:00
fsl-ls2088a-qds.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls2088a-rdb.dts
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
fsl-ls2088a.dtsi
arm64: dts: layerscape: removed compatible string "snps,dw-pcie"
2018-12-08 10:28:38 +08:00
fsl-lx2160a-cex7.dtsi
arm64: dts: lx2160a-cex7: add on-module eeproms
2020-03-11 15:58:13 +08:00
fsl-lx2160a-clearfog-cx.dts
arm64: dts: lx2160a: add dts for CEX7 platforms
2019-12-23 11:36:36 +08:00
fsl-lx2160a-clearfog-itx.dtsi
arm64: dts: lx2160a: add dts for CEX7 platforms
2019-12-23 11:36:36 +08:00
fsl-lx2160a-honeycomb.dts
arm64: dts: lx2160a: add dts for CEX7 platforms
2019-12-23 11:36:36 +08:00
fsl-lx2160a-qds.dts
arm64: dts: lx2160aqds: Add FSPI node properties
2020-03-11 16:34:29 +08:00
fsl-lx2160a-rdb.dts
arm64: dts: lx2160ardb: Update FSPI node properties
2020-03-11 16:34:11 +08:00
fsl-lx2160a.dtsi
arm64: dts: layerscape: add iommu-map property to pci nodes
2020-03-11 16:15:48 +08:00
imx8mm-evk.dts
arm64: dts: imx8mm-evk: Add secondary cpus supply
2020-04-14 20:52:27 +08:00
imx8mm-pinfunc.h
arm64: dts: imx8mm: Add missing mux options for UART1 and UART2 signals
2019-12-23 11:41:38 +08:00
imx8mm.dtsi
arm64: dts: imx8m: fix aips dts node
2020-03-16 16:16:00 +08:00
imx8mn-ddr4-evk.dts
arm64: dts: imx8mn-ddr4-evk: Add secondary cpus supply
2020-04-14 20:52:46 +08:00
imx8mn-evk.dts
arm64: dts: imx8mn: Add LPDDR4 EVK board support
2019-10-28 21:48:04 +08:00
imx8mn-evk.dtsi
arm64: dts: imx8mn-evk: Enable pca6416 on i2c3 bus
2020-03-11 16:05:39 +08:00
imx8mn-pinfunc.h
dt-bindings: imx: Add pinctrl binding doc for i.MX8MN
2019-06-25 10:39:39 +02:00
imx8mn.dtsi
arm64: dts: imx8mn: Add snvs clock to powerkey
2020-03-16 16:16:00 +08:00
imx8mp-evk.dts
arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus
2020-03-11 16:07:17 +08:00
imx8mp-pinfunc.h
arm64: dts: freescale: Add i.MX8MP dtsi support
2020-02-17 14:13:32 +08:00
imx8mp.dtsi
arm64: dts: imx8mp: Add snvs clock to powerkey
2020-03-16 16:16:00 +08:00
imx8mq-evk.dts
arm64: dts: imx8mq-evk: add phy-reset-gpios for fec1
2020-02-24 09:37:19 +08:00
imx8mq-hummingboard-pulse.dts
arm64: dts: imx8mq-hummingboard-pulse: add eeprom description
2020-01-09 17:14:46 +08:00
imx8mq-librem5-devkit.dts
arm64: dts: librem5-devkit: add lsm9ds1 mount matrix
2020-03-11 15:59:19 +08:00
imx8mq-nitrogen.dts
arm64: dts: imx8mq: Move usdhc clocks assignment to board DT
2019-10-28 21:48:03 +08:00
imx8mq-phanbell.dts
arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration
2020-03-11 17:12:32 +08:00
imx8mq-pico-pi.dts
arm64: dts: imx8mq: Move usdhc clocks assignment to board DT
2019-10-28 21:48:03 +08:00
imx8mq-pinfunc.h
arm64: add basic DTS for i.MX8MQ
2018-12-16 17:28:01 +08:00
imx8mq-sr-som.dtsi
arm64: dts: imx8mq-sr-som: add eeprom description
2020-01-09 17:14:32 +08:00
imx8mq-thor96.dts
arm64: dts: freescale: Add devicetree support for Thor96 board
2020-01-09 14:40:55 +08:00
imx8mq-zii-ultra-rmb3.dts
arm64: dts: zii-ultra: adjust board names
2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra-zest.dts
arm64: dts: zii-ultra: adjust board names
2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra.dtsi
ARM: Device-tree updates
2019-12-05 12:09:47 -08:00
imx8mq.dtsi
arm64: dts: imx8m: fix aips dts node
2020-03-16 16:16:00 +08:00
imx8qxp-ai_ml.dts
arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT
2019-10-28 21:48:03 +08:00
imx8qxp-colibri-eval-v3.dts
arm64: dts: freescale: add initial support for colibri imx8x
2019-11-04 09:28:07 +08:00
imx8qxp-colibri-eval-v3.dtsi
arm64: dts: freescale: add initial support for colibri imx8x
2019-11-04 09:28:07 +08:00
imx8qxp-colibri.dtsi
arm64: dts: freescale: add initial support for colibri imx8x
2019-11-04 09:28:07 +08:00
imx8qxp-mek.dts
arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHY
2020-02-19 10:12:57 +08:00
imx8qxp.dtsi
arm64: dts: imx: add i.MX8QXP thermal support
2020-03-11 15:58:13 +08:00
Makefile
arm64: dts: ls1028a: sl28: add support for variant 2
2020-03-16 16:16:00 +08:00
qoriq-bman-portals.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-0.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-1.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-2.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-3.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-4.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-5.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-0.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-1.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
qoriq-fman3-0.dtsi
ARM: Device-tree updates
2018-08-23 14:02:22 -07:00
qoriq-qman-portals.dtsi
arm64: dts: freescale: Update to use SPDX identifiers
2018-06-19 11:07:47 +08:00
s32v234-evb.dts
arm64: dts: fsl: Add device tree for S32V234-EVB
2019-10-28 21:48:03 +08:00
s32v234.dtsi
arm64: dts: freescale: s32v234: use generic name bus
2020-02-13 11:25:25 +08:00
dd12fa6978