mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 19:31:09 +07:00
afc3bca4cf
DT unit addresses should be lower case hex. Fix all the
binding examples.
Converted with the following command from Krzysztof Kozlowski:
sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt')
Signed-off-by: Rob Herring <robh@kernel.org>
51 lines
1.5 KiB
Plaintext
51 lines
1.5 KiB
Plaintext
* Samsung Exynos5410 Clock Controller
|
|
|
|
The Exynos5410 clock controller generates and supplies clock to various
|
|
controllers within the Exynos5410 SoC.
|
|
|
|
Required Properties:
|
|
|
|
- compatible: should be "samsung,exynos5410-clock"
|
|
|
|
- reg: physical base address of the controller and length of memory mapped
|
|
region.
|
|
|
|
- #clock-cells: should be 1.
|
|
|
|
- clocks: should contain an entry specifying the root clock from external
|
|
oscillator supplied through XXTI or XusbXTI pin. This clock should be
|
|
defined using standard clock bindings with "fin_pll" clock-output-name.
|
|
That clock is being passed internally to the 9 PLLs.
|
|
|
|
All available clocks are defined as preprocessor macros in
|
|
dt-bindings/clock/exynos5410.h header and can be used in device
|
|
tree sources.
|
|
|
|
Example 1: An example of a clock controller node is listed below.
|
|
|
|
fin_pll: xxti {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "fin_pll";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
clock: clock-controller@10010000 {
|
|
compatible = "samsung,exynos5410-clock";
|
|
reg = <0x10010000 0x30000>;
|
|
#clock-cells = <1>;
|
|
clocks = <&fin_pll>;
|
|
};
|
|
|
|
Example 2: UART controller node that consumes the clock generated by the clock
|
|
controller. Refer to the standard clock bindings for information
|
|
about 'clocks' and 'clock-names' property.
|
|
|
|
serial@12c20000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x12C00000 0x100>;
|
|
interrupts = <0 51 0>;
|
|
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|