Antonio Quartulli dad9defd28 mac80211: ibss - remove not authorized station earlier ... A station which is not authorized has to be purged earlier to give it a chance to re-try to establish an IBSS/RSN session soon. Set the timeout to 10 seconds. Some refactoring has also been done to allow the IBSS submodule to have its own expiring function. Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>		2013-08-01 10:49:02 +02:00
..
aes_ccm.c
aes_ccm.h
aes_cmac.c
aes_cmac.h
agg-rx.c
agg-tx.c
cfg.c	mac80211: select and adjust bitrates according to channel mode	2013-07-16 09:58:06 +03:00
cfg.h
chan.c
debug.h
debugfs_key.c
debugfs_key.h
debugfs_netdev.c
debugfs_netdev.h
debugfs_sta.c
debugfs_sta.h
debugfs.c
debugfs.h
driver-ops.h
event.c
ht.c	mac80211: enable HT overrides for ibss	2013-07-16 09:57:57 +03:00
ibss.c	mac80211: ibss - remove not authorized station earlier	2013-08-01 10:49:02 +02:00
ieee80211_i.h	mac80211: use oneshot blink API for LED triggers	2013-08-01 10:48:49 +02:00
iface.c	cfg80211/mac80211: use reduced txpower for 5 and 10 MHz	2013-07-16 09:58:08 +03:00
Kconfig
key.c
key.h
led.c	mac80211: use oneshot blink API for LED triggers	2013-08-01 10:48:49 +02:00
led.h	mac80211: use oneshot blink API for LED triggers	2013-08-01 10:48:49 +02:00
main.c	mac80211: allow scanning for 5/10 MHz channels in IBSS	2013-07-16 09:58:09 +03:00
Makefile
mesh_hwmp.c
mesh_pathtbl.c
mesh_plink.c	mac80211: select and adjust bitrates according to channel mode	2013-07-16 09:58:06 +03:00
mesh_ps.c
mesh_sync.c
mesh.c	mac80211: set forwarding in mesh capability info	2013-07-16 09:58:14 +03:00
mesh.h	mac80211: update mesh beacon on workqueue	2013-06-18 15:57:27 +02:00
michael.c
michael.h
mlme.c	cfg80211/mac80211: use reduced txpower for 5 and 10 MHz	2013-07-16 09:58:08 +03:00
offchannel.c
pm.c
rate.c	mac80211: select and adjust bitrates according to channel mode	2013-07-16 09:58:06 +03:00
rate.h	mac80211/rc80211: add chandef to rate initialization	2013-07-16 09:58:02 +03:00
rc80211_minstrel_debugfs.c
rc80211_minstrel_ht_debugfs.c
rc80211_minstrel_ht.c	mac80211: fix timing for 5 MHz and 10 MHz channels	2013-07-16 09:58:04 +03:00
rc80211_minstrel_ht.h
rc80211_minstrel.c	mac80211: fix timing for 5 MHz and 10 MHz channels	2013-07-16 09:58:04 +03:00
rc80211_minstrel.h
rc80211_pid_algo.c	mac80211/rc80211: add chandef to rate initialization	2013-07-16 09:58:02 +03:00
rc80211_pid_debugfs.c
rc80211_pid.h
rx.c	mac80211: select and adjust bitrates according to channel mode	2013-07-16 09:58:06 +03:00
scan.c	mac80211: allow scanning for 5/10 MHz channels in IBSS	2013-07-16 09:58:09 +03:00
spectmgmt.c
sta_info.c	mac80211: initialize power mode for mesh STAs	2013-06-24 15:59:20 +02:00
sta_info.h	mac80211: Ensure tid_start_tx is protected by sta->lock	2013-06-13 10:27:07 +02:00
status.c	mac80211: use oneshot blink API for LED triggers	2013-08-01 10:48:49 +02:00
tkip.c
tkip.h
trace.c
trace.h
tx.c	mac80211: use oneshot blink API for LED triggers	2013-08-01 10:48:49 +02:00
util.c	mac80211: fix regression when initializing ibss wmm params	2013-07-16 09:58:12 +03:00
vht.c	mac80211: Fix VHT bandwidth change event	2013-06-13 11:58:47 +02:00
wep.c
wep.h
wme.c
wme.h
wpa.c
wpa.h