mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-20 01:58:40 +07:00
ab80661883
This adds a basic DTS file for the Sony Xperia Z2 Tablet, containing definitions for regulators, eMMC/SD-card, USB, WiFi, Touchscreen, charger, backlight, coincell and buttons. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
642 lines
12 KiB
Plaintext
642 lines
12 KiB
Plaintext
#include "qcom-msm8974pro.dtsi"
|
|
#include "qcom-pm8841.dtsi"
|
|
#include "qcom-pm8941.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
|
|
/ {
|
|
model = "Sony Xperia Z2 Tablet";
|
|
compatible = "sony,xperia-castor", "qcom,msm8974";
|
|
|
|
aliases {
|
|
serial0 = &blsp1_uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
input-name = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_keys_pin_a>;
|
|
|
|
volume-down {
|
|
label = "volume_down";
|
|
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
|
|
camera-snapshot {
|
|
label = "camera_snapshot";
|
|
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_CAMERA>;
|
|
};
|
|
|
|
camera-focus {
|
|
label = "camera_focus";
|
|
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_CAMERA_FOCUS>;
|
|
};
|
|
|
|
volume-up {
|
|
label = "volume_up";
|
|
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
};
|
|
|
|
smd {
|
|
rpm {
|
|
rpm_requests {
|
|
pm8941-regulators {
|
|
vdd_l1_l3-supply = <&pm8941_s1>;
|
|
vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
|
|
vdd_l4_l11-supply = <&pm8941_s1>;
|
|
vdd_l5_l7-supply = <&pm8941_s2>;
|
|
vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
|
|
vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
|
|
vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
|
|
vdd_l21-supply = <&vreg_boost>;
|
|
|
|
s1 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
s2 {
|
|
regulator-min-microvolt = <2150000>;
|
|
regulator-max-microvolt = <2150000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
s3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-system-load = <154000>;
|
|
};
|
|
|
|
s4 {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
l1 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
l3 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
l4 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
l5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l8 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l9 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
l11 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
};
|
|
|
|
l12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l13 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l15 {
|
|
regulator-min-microvolt = <2050000>;
|
|
regulator-max-microvolt = <2050000>;
|
|
};
|
|
|
|
l16 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
|
|
l17 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
|
|
l18 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
l19 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
l20 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
regulator-allow-set-load;
|
|
regulator-boot-on;
|
|
regulator-allow-set-load;
|
|
regulator-system-load = <500000>;
|
|
};
|
|
|
|
l21 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l22 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
l23 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
l24 {
|
|
regulator-min-microvolt = <3075000>;
|
|
regulator-max-microvolt = <3075000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vreg_bl_vddio: lcd-backlight-vddio {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vreg_bl_vddio";
|
|
regulator-min-microvolt = <3150000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
|
|
gpio = <&msmgpio 69 0>;
|
|
enable-active-high;
|
|
|
|
vin-supply = <&pm8941_s3>;
|
|
startup-delay-us = <70000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_backlight_en_pin_a>;
|
|
};
|
|
|
|
vreg_vsp: lcd-dcdc-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vreg_vsp";
|
|
regulator-min-microvolt = <5600000>;
|
|
regulator-max-microvolt = <5600000>;
|
|
|
|
gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_dcdc_en_pin_a>;
|
|
};
|
|
|
|
vreg_wlan: wlan-regulator {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "wl-reg";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_regulator_pin>;
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
sdhci@f9824900 {
|
|
status = "ok";
|
|
|
|
vmmc-supply = <&pm8941_l20>;
|
|
vqmmc-supply = <&pm8941_s3>;
|
|
|
|
bus-width = <8>;
|
|
non-removable;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhc1_pin_a>;
|
|
};
|
|
|
|
sdhci@f9864900 {
|
|
status = "ok";
|
|
|
|
max-frequency = <100000000>;
|
|
non-removable;
|
|
vmmc-supply = <&vreg_wlan>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhc3_pin_a>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
bcrmf@1 {
|
|
compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
|
|
reg = <1>;
|
|
|
|
brcm,drive-strength = <10>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_sleep_clk_pin>;
|
|
};
|
|
};
|
|
|
|
sdhci@f98a4900 {
|
|
status = "ok";
|
|
|
|
bus-width = <4>;
|
|
|
|
vmmc-supply = <&pm8941_l21>;
|
|
vqmmc-supply = <&pm8941_l13>;
|
|
|
|
cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
|
|
};
|
|
|
|
serial@f991e000 {
|
|
status = "ok";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&blsp1_uart2_pin_a>;
|
|
};
|
|
|
|
usb@f9a55000 {
|
|
status = "ok";
|
|
|
|
phys = <&usb_hs1_phy>;
|
|
phy-select = <&tcsr 0xb000 0>;
|
|
extcon = <&smbb>, <&usb_id>;
|
|
vbus-supply = <&chg_otg>;
|
|
|
|
hnp-disable;
|
|
srp-disable;
|
|
adp-disable;
|
|
|
|
ulpi {
|
|
phy@a {
|
|
status = "ok";
|
|
|
|
v1p8-supply = <&pm8941_l6>;
|
|
v3p3-supply = <&pm8941_l24>;
|
|
|
|
extcon = <&smbb>;
|
|
qcom,init-seq = /bits/ 8 <0x1 0x64>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pinctrl@fd510000 {
|
|
blsp1_uart2_pin_a: blsp1-uart2-pin-active {
|
|
rx {
|
|
pins = "gpio5";
|
|
function = "blsp_uart2";
|
|
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
tx {
|
|
pins = "gpio4";
|
|
function = "blsp_uart2";
|
|
|
|
drive-strength = <4>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c8_pins: i2c8 {
|
|
mux {
|
|
pins = "gpio47", "gpio48";
|
|
function = "blsp_i2c8";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c11_pins: i2c11 {
|
|
mux {
|
|
pins = "gpio83", "gpio84";
|
|
function = "blsp_i2c11";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
lcd_backlight_en_pin_a: lcd-backlight-vddio {
|
|
pins = "gpio69";
|
|
drive-strength = <10>;
|
|
output-low;
|
|
bias-disable;
|
|
};
|
|
|
|
sdhc1_pin_a: sdhc1-pin-active {
|
|
clk {
|
|
pins = "sdc1_clk";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-data {
|
|
pins = "sdc1_cmd", "sdc1_data";
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sdhc2_cd_pin_a: sdhc2-cd-pin-active {
|
|
pins = "gpio62";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
sdhc2_pin_a: sdhc2-pin-active {
|
|
clk {
|
|
pins = "sdc2_clk";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-data {
|
|
pins = "sdc2_cmd", "sdc2_data";
|
|
drive-strength = <6>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sdhc3_pin_a: sdhc3-pin-active {
|
|
clk {
|
|
pins = "gpio40";
|
|
function = "sdc3";
|
|
|
|
drive-strength = <10>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd {
|
|
pins = "gpio39";
|
|
function = "sdc3";
|
|
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
data {
|
|
pins = "gpio35", "gpio36", "gpio37", "gpio38";
|
|
function = "sdc3";
|
|
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
ts_int_pin: synaptics {
|
|
pin {
|
|
pins = "gpio86";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c@f9964000 {
|
|
status = "ok";
|
|
|
|
clock-frequency = <355000>;
|
|
qcom,src-freq = <50000000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c8_pins>;
|
|
|
|
synaptics@2c {
|
|
compatible = "syna,rmi-i2c";
|
|
reg = <0x2c>;
|
|
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
vdd-supply = <&pm8941_l22>;
|
|
vio-supply = <&pm8941_lvs3>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ts_int_pin>;
|
|
|
|
rmi-f01@1 {
|
|
reg = <0x1>;
|
|
syna,nosleep = <1>;
|
|
};
|
|
|
|
rmi-f11@11 {
|
|
reg = <0x11>;
|
|
syna,f11-flip-x = <1>;
|
|
syna,sensor-type = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c@f9967000 {
|
|
status = "ok";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c11_pins>;
|
|
clock-frequency = <355000>;
|
|
qcom,src-freq = <50000000>;
|
|
|
|
lp8566_wled: backlight@2c {
|
|
compatible = "ti,lp8556";
|
|
reg = <0x2c>;
|
|
power-supply = <&vreg_bl_vddio>;
|
|
|
|
bl-name = "backlight";
|
|
dev-ctrl = /bits/ 8 <0x05>;
|
|
init-brt = /bits/ 8 <0x3f>;
|
|
rom_a0h {
|
|
rom-addr = /bits/ 8 <0xa0>;
|
|
rom-val = /bits/ 8 <0xff>;
|
|
};
|
|
rom_a1h {
|
|
rom-addr = /bits/ 8 <0xa1>;
|
|
rom-val = /bits/ 8 <0x3f>;
|
|
};
|
|
rom_a2h {
|
|
rom-addr = /bits/ 8 <0xa2>;
|
|
rom-val = /bits/ 8 <0x20>;
|
|
};
|
|
rom_a3h {
|
|
rom-addr = /bits/ 8 <0xa3>;
|
|
rom-val = /bits/ 8 <0x5e>;
|
|
};
|
|
rom_a4h {
|
|
rom-addr = /bits/ 8 <0xa4>;
|
|
rom-val = /bits/ 8 <0x02>;
|
|
};
|
|
rom_a5h {
|
|
rom-addr = /bits/ 8 <0xa5>;
|
|
rom-val = /bits/ 8 <0x04>;
|
|
};
|
|
rom_a6h {
|
|
rom-addr = /bits/ 8 <0xa6>;
|
|
rom-val = /bits/ 8 <0x80>;
|
|
};
|
|
rom_a7h {
|
|
rom-addr = /bits/ 8 <0xa7>;
|
|
rom-val = /bits/ 8 <0xf7>;
|
|
};
|
|
rom_a9h {
|
|
rom-addr = /bits/ 8 <0xa9>;
|
|
rom-val = /bits/ 8 <0x80>;
|
|
};
|
|
rom_aah {
|
|
rom-addr = /bits/ 8 <0xaa>;
|
|
rom-val = /bits/ 8 <0x0f>;
|
|
};
|
|
rom_aeh {
|
|
rom-addr = /bits/ 8 <0xae>;
|
|
rom-val = /bits/ 8 <0x0f>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&spmi_bus {
|
|
pm8941@0 {
|
|
charger@1000 {
|
|
qcom,fast-charge-safe-current = <1500000>;
|
|
qcom,fast-charge-current-limit = <1500000>;
|
|
qcom,dc-current-limit = <1800000>;
|
|
qcom,fast-charge-safe-voltage = <4400000>;
|
|
qcom,fast-charge-high-threshold-voltage = <4350000>;
|
|
qcom,fast-charge-low-threshold-voltage = <3400000>;
|
|
qcom,auto-recharge-threshold-voltage = <4200000>;
|
|
qcom,minimum-input-voltage = <4300000>;
|
|
};
|
|
|
|
gpios@c000 {
|
|
gpio_keys_pin_a: gpio-keys-active {
|
|
pins = "gpio2", "gpio5";
|
|
function = "normal";
|
|
|
|
bias-pull-up;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
};
|
|
|
|
wlan_sleep_clk_pin: wl-sleep-clk {
|
|
pins = "gpio17";
|
|
function = "func2";
|
|
|
|
output-high;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
};
|
|
|
|
wlan_regulator_pin: wl-reg-active {
|
|
pins = "gpio18";
|
|
function = "normal";
|
|
|
|
bias-disable;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
};
|
|
|
|
lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
|
|
pins = "gpio20";
|
|
function = "normal";
|
|
|
|
bias-disable;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
input-disable;
|
|
output-low;
|
|
};
|
|
|
|
};
|
|
|
|
coincell@2800 {
|
|
status = "ok";
|
|
qcom,rset-ohms = <2100>;
|
|
qcom,vset-millivolts = <3000>;
|
|
};
|
|
};
|
|
};
|