linux_dsm_epyc7002/arch/x86_64/kernel/genapic_flat.c

/*
 * Copyright 2004 James Cleverdon, IBM.
 * Subject to the GNU Public License, v.2
 *
 * Flat APIC subarch code.
 *
 * Hacked for x86-64 by James Cleverdon from i386 architecture code by
 * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
 * James Cleverdon.
 */
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <asm/smp.h>
#include <asm/ipi.h>

static cpumask_t flat_target_cpus(void)
{
	return cpu_online_map;
}

static cpumask_t flat_vector_allocation_domain(int cpu)
{
	/* Careful. Some cpus do not strictly honor the set of cpus
	 * specified in the interrupt destination when using lowest
	 * priority interrupt delivery mode.
	 *
	 * In particular there was a hyperthreading cpu observed to
	 * deliver interrupts to the wrong hyperthread when only one
	 * hyperthread was specified in the interrupt desitination.
	 */
	cpumask_t domain = { { [0] = APIC_ALL_CPUS, } };
	return domain;
}

/*
 * Set up the logical destination ID.
 *
 * Intel recommends to set DFR, LDR and TPR before enabling
 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
 * document number 292116).  So here it goes...
 */
static void flat_init_apic_ldr(void)
{
	unsigned long val;
	unsigned long num, id;

	num = smp_processor_id();
	id = 1UL << num;
	x86_cpu_to_log_apicid[num] = id;
	apic_write(APIC_DFR, APIC_DFR_FLAT);
	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
	val |= SET_APIC_LOGICAL_ID(id);
	apic_write(APIC_LDR, val);
}

static void flat_send_IPI_mask(cpumask_t cpumask, int vector)
{
	unsigned long mask = cpus_addr(cpumask)[0];
	unsigned long cfg;
	unsigned long flags;

	local_irq_save(flags);

	/*
	 * Wait for idle.
	 */
	apic_wait_icr_idle();

	/*
	 * prepare target chip field
	 */
	cfg = __prepare_ICR2(mask);
	apic_write(APIC_ICR2, cfg);

	/*
	 * program the ICR
	 */
	cfg = __prepare_ICR(0, vector, APIC_DEST_LOGICAL);

	/*
	 * Send the IPI. The write to APIC_ICR fires this off.
	 */
	apic_write(APIC_ICR, cfg);
	local_irq_restore(flags);
}

static void flat_send_IPI_allbutself(int vector)
{
#ifdef	CONFIG_HOTPLUG_CPU
	int hotplug = 1;
#else
	int hotplug = 0;
#endif
	if (hotplug || vector == NMI_VECTOR) {
		cpumask_t allbutme = cpu_online_map;

		cpu_clear(smp_processor_id(), allbutme);

		if (!cpus_empty(allbutme))
			flat_send_IPI_mask(allbutme, vector);
	} else if (num_online_cpus() > 1) {
		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL);
	}
}

static void flat_send_IPI_all(int vector)
{
	if (vector == NMI_VECTOR)
		flat_send_IPI_mask(cpu_online_map, vector);
	else
		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
}

static int flat_apic_id_registered(void)
{
	return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
}

static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask)
{
	return cpus_addr(cpumask)[0] & APIC_ALL_CPUS;
}

static unsigned int phys_pkg_id(int index_msb)
{
	return hard_smp_processor_id() >> index_msb;
}

struct genapic apic_flat =  {
	.name = "flat",
	.int_delivery_mode = dest_LowestPrio,
	.int_dest_mode = (APIC_DEST_LOGICAL != 0),
	.target_cpus = flat_target_cpus,
	.vector_allocation_domain = flat_vector_allocation_domain,
	.apic_id_registered = flat_apic_id_registered,
	.init_apic_ldr = flat_init_apic_ldr,
	.send_IPI_all = flat_send_IPI_all,
	.send_IPI_allbutself = flat_send_IPI_allbutself,
	.send_IPI_mask = flat_send_IPI_mask,
	.cpu_mask_to_apicid = flat_cpu_mask_to_apicid,
	.phys_pkg_id = phys_pkg_id,
};

/*
 * Physflat mode is used when there are more than 8 CPUs on a AMD system.
 * We cannot use logical delivery in this case because the mask
 * overflows, so use physical mode.
 */

static cpumask_t physflat_target_cpus(void)
{
	return cpu_online_map;
}

static cpumask_t physflat_vector_allocation_domain(int cpu)
{
	cpumask_t domain = CPU_MASK_NONE;
	cpu_set(cpu, domain);
	return domain;
}


static void physflat_send_IPI_mask(cpumask_t cpumask, int vector)
{
	send_IPI_mask_sequence(cpumask, vector);
}

static void physflat_send_IPI_allbutself(int vector)
{
	cpumask_t allbutme = cpu_online_map;

	cpu_clear(smp_processor_id(), allbutme);
	physflat_send_IPI_mask(allbutme, vector);
}

static void physflat_send_IPI_all(int vector)
{
	physflat_send_IPI_mask(cpu_online_map, vector);
}

static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
{
	int cpu;

	/*
	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
	 * May as well be the first.
	 */
	cpu = first_cpu(cpumask);
	if ((unsigned)cpu < NR_CPUS)
		return x86_cpu_to_apicid[cpu];
	else
		return BAD_APICID;
}

struct genapic apic_physflat =  {
	.name = "physical flat",
	.int_delivery_mode = dest_Fixed,
	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
	.target_cpus = physflat_target_cpus,
	.vector_allocation_domain = physflat_vector_allocation_domain,
	.apic_id_registered = flat_apic_id_registered,
	.init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/
	.send_IPI_all = physflat_send_IPI_all,
	.send_IPI_allbutself = physflat_send_IPI_allbutself,
	.send_IPI_mask = physflat_send_IPI_mask,
	.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
	.phys_pkg_id = phys_pkg_id,
};