mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 17:36:40 +07:00
1086 lines
27 KiB
C
1086 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (C) 2018 Spreadtrum Communications Inc.
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dma/sprd-dma.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#define SPRD_SPI_TXD 0x0
|
|
#define SPRD_SPI_CLKD 0x4
|
|
#define SPRD_SPI_CTL0 0x8
|
|
#define SPRD_SPI_CTL1 0xc
|
|
#define SPRD_SPI_CTL2 0x10
|
|
#define SPRD_SPI_CTL3 0x14
|
|
#define SPRD_SPI_CTL4 0x18
|
|
#define SPRD_SPI_CTL5 0x1c
|
|
#define SPRD_SPI_INT_EN 0x20
|
|
#define SPRD_SPI_INT_CLR 0x24
|
|
#define SPRD_SPI_INT_RAW_STS 0x28
|
|
#define SPRD_SPI_INT_MASK_STS 0x2c
|
|
#define SPRD_SPI_STS1 0x30
|
|
#define SPRD_SPI_STS2 0x34
|
|
#define SPRD_SPI_DSP_WAIT 0x38
|
|
#define SPRD_SPI_STS3 0x3c
|
|
#define SPRD_SPI_CTL6 0x40
|
|
#define SPRD_SPI_STS4 0x44
|
|
#define SPRD_SPI_FIFO_RST 0x48
|
|
#define SPRD_SPI_CTL7 0x4c
|
|
#define SPRD_SPI_STS5 0x50
|
|
#define SPRD_SPI_CTL8 0x54
|
|
#define SPRD_SPI_CTL9 0x58
|
|
#define SPRD_SPI_CTL10 0x5c
|
|
#define SPRD_SPI_CTL11 0x60
|
|
#define SPRD_SPI_CTL12 0x64
|
|
#define SPRD_SPI_STS6 0x68
|
|
#define SPRD_SPI_STS7 0x6c
|
|
#define SPRD_SPI_STS8 0x70
|
|
#define SPRD_SPI_STS9 0x74
|
|
|
|
/* Bits & mask definition for register CTL0 */
|
|
#define SPRD_SPI_SCK_REV BIT(13)
|
|
#define SPRD_SPI_NG_TX BIT(1)
|
|
#define SPRD_SPI_NG_RX BIT(0)
|
|
#define SPRD_SPI_CHNL_LEN_MASK GENMASK(4, 0)
|
|
#define SPRD_SPI_CSN_MASK GENMASK(11, 8)
|
|
#define SPRD_SPI_CS0_VALID BIT(8)
|
|
|
|
/* Bits & mask definition for register SPI_INT_EN */
|
|
#define SPRD_SPI_TX_END_INT_EN BIT(8)
|
|
#define SPRD_SPI_RX_END_INT_EN BIT(9)
|
|
|
|
/* Bits & mask definition for register SPI_INT_RAW_STS */
|
|
#define SPRD_SPI_TX_END_RAW BIT(8)
|
|
#define SPRD_SPI_RX_END_RAW BIT(9)
|
|
|
|
/* Bits & mask definition for register SPI_INT_CLR */
|
|
#define SPRD_SPI_TX_END_CLR BIT(8)
|
|
#define SPRD_SPI_RX_END_CLR BIT(9)
|
|
|
|
/* Bits & mask definition for register INT_MASK_STS */
|
|
#define SPRD_SPI_MASK_RX_END BIT(9)
|
|
#define SPRD_SPI_MASK_TX_END BIT(8)
|
|
|
|
/* Bits & mask definition for register STS2 */
|
|
#define SPRD_SPI_TX_BUSY BIT(8)
|
|
|
|
/* Bits & mask definition for register CTL1 */
|
|
#define SPRD_SPI_RX_MODE BIT(12)
|
|
#define SPRD_SPI_TX_MODE BIT(13)
|
|
#define SPRD_SPI_RTX_MD_MASK GENMASK(13, 12)
|
|
|
|
/* Bits & mask definition for register CTL2 */
|
|
#define SPRD_SPI_DMA_EN BIT(6)
|
|
|
|
/* Bits & mask definition for register CTL4 */
|
|
#define SPRD_SPI_START_RX BIT(9)
|
|
#define SPRD_SPI_ONLY_RECV_MASK GENMASK(8, 0)
|
|
|
|
/* Bits & mask definition for register SPI_INT_CLR */
|
|
#define SPRD_SPI_RX_END_INT_CLR BIT(9)
|
|
#define SPRD_SPI_TX_END_INT_CLR BIT(8)
|
|
|
|
/* Bits & mask definition for register SPI_INT_RAW */
|
|
#define SPRD_SPI_RX_END_IRQ BIT(9)
|
|
#define SPRD_SPI_TX_END_IRQ BIT(8)
|
|
|
|
/* Bits & mask definition for register CTL12 */
|
|
#define SPRD_SPI_SW_RX_REQ BIT(0)
|
|
#define SPRD_SPI_SW_TX_REQ BIT(1)
|
|
|
|
/* Bits & mask definition for register CTL7 */
|
|
#define SPRD_SPI_DATA_LINE2_EN BIT(15)
|
|
#define SPRD_SPI_MODE_MASK GENMASK(5, 3)
|
|
#define SPRD_SPI_MODE_OFFSET 3
|
|
#define SPRD_SPI_3WIRE_MODE 4
|
|
#define SPRD_SPI_4WIRE_MODE 0
|
|
|
|
/* Bits & mask definition for register CTL8 */
|
|
#define SPRD_SPI_TX_MAX_LEN_MASK GENMASK(19, 0)
|
|
#define SPRD_SPI_TX_LEN_H_MASK GENMASK(3, 0)
|
|
#define SPRD_SPI_TX_LEN_H_OFFSET 16
|
|
|
|
/* Bits & mask definition for register CTL9 */
|
|
#define SPRD_SPI_TX_LEN_L_MASK GENMASK(15, 0)
|
|
|
|
/* Bits & mask definition for register CTL10 */
|
|
#define SPRD_SPI_RX_MAX_LEN_MASK GENMASK(19, 0)
|
|
#define SPRD_SPI_RX_LEN_H_MASK GENMASK(3, 0)
|
|
#define SPRD_SPI_RX_LEN_H_OFFSET 16
|
|
|
|
/* Bits & mask definition for register CTL11 */
|
|
#define SPRD_SPI_RX_LEN_L_MASK GENMASK(15, 0)
|
|
|
|
/* Default & maximum word delay cycles */
|
|
#define SPRD_SPI_MIN_DELAY_CYCLE 14
|
|
#define SPRD_SPI_MAX_DELAY_CYCLE 130
|
|
|
|
#define SPRD_SPI_FIFO_SIZE 32
|
|
#define SPRD_SPI_CHIP_CS_NUM 0x4
|
|
#define SPRD_SPI_CHNL_LEN 2
|
|
#define SPRD_SPI_DEFAULT_SOURCE 26000000
|
|
#define SPRD_SPI_MAX_SPEED_HZ 48000000
|
|
#define SPRD_SPI_AUTOSUSPEND_DELAY 100
|
|
#define SPRD_SPI_DMA_STEP 8
|
|
|
|
enum sprd_spi_dma_channel {
|
|
SPRD_SPI_RX,
|
|
SPRD_SPI_TX,
|
|
SPRD_SPI_MAX,
|
|
};
|
|
|
|
struct sprd_spi_dma {
|
|
bool enable;
|
|
struct dma_chan *dma_chan[SPRD_SPI_MAX];
|
|
enum dma_slave_buswidth width;
|
|
u32 fragmens_len;
|
|
u32 rx_len;
|
|
};
|
|
|
|
struct sprd_spi {
|
|
void __iomem *base;
|
|
phys_addr_t phy_base;
|
|
struct device *dev;
|
|
struct clk *clk;
|
|
int irq;
|
|
u32 src_clk;
|
|
u32 hw_mode;
|
|
u32 trans_len;
|
|
u32 trans_mode;
|
|
u32 word_delay;
|
|
u32 hw_speed_hz;
|
|
u32 len;
|
|
int status;
|
|
struct sprd_spi_dma dma;
|
|
struct completion xfer_completion;
|
|
const void *tx_buf;
|
|
void *rx_buf;
|
|
int (*read_bufs)(struct sprd_spi *ss, u32 len);
|
|
int (*write_bufs)(struct sprd_spi *ss, u32 len);
|
|
};
|
|
|
|
static u32 sprd_spi_transfer_max_timeout(struct sprd_spi *ss,
|
|
struct spi_transfer *t)
|
|
{
|
|
/*
|
|
* The time spent on transmission of the full FIFO data is the maximum
|
|
* SPI transmission time.
|
|
*/
|
|
u32 size = t->bits_per_word * SPRD_SPI_FIFO_SIZE;
|
|
u32 bit_time_us = DIV_ROUND_UP(USEC_PER_SEC, ss->hw_speed_hz);
|
|
u32 total_time_us = size * bit_time_us;
|
|
/*
|
|
* There is an interval between data and the data in our SPI hardware,
|
|
* so the total transmission time need add the interval time.
|
|
*/
|
|
u32 interval_cycle = SPRD_SPI_FIFO_SIZE * ss->word_delay;
|
|
u32 interval_time_us = DIV_ROUND_UP(interval_cycle * USEC_PER_SEC,
|
|
ss->src_clk);
|
|
|
|
return total_time_us + interval_time_us;
|
|
}
|
|
|
|
static int sprd_spi_wait_for_tx_end(struct sprd_spi *ss, struct spi_transfer *t)
|
|
{
|
|
u32 val, us;
|
|
int ret;
|
|
|
|
us = sprd_spi_transfer_max_timeout(ss, t);
|
|
ret = readl_relaxed_poll_timeout(ss->base + SPRD_SPI_INT_RAW_STS, val,
|
|
val & SPRD_SPI_TX_END_IRQ, 0, us);
|
|
if (ret) {
|
|
dev_err(ss->dev, "SPI error, spi send timeout!\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = readl_relaxed_poll_timeout(ss->base + SPRD_SPI_STS2, val,
|
|
!(val & SPRD_SPI_TX_BUSY), 0, us);
|
|
if (ret) {
|
|
dev_err(ss->dev, "SPI error, spi busy timeout!\n");
|
|
return ret;
|
|
}
|
|
|
|
writel_relaxed(SPRD_SPI_TX_END_INT_CLR, ss->base + SPRD_SPI_INT_CLR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sprd_spi_wait_for_rx_end(struct sprd_spi *ss, struct spi_transfer *t)
|
|
{
|
|
u32 val, us;
|
|
int ret;
|
|
|
|
us = sprd_spi_transfer_max_timeout(ss, t);
|
|
ret = readl_relaxed_poll_timeout(ss->base + SPRD_SPI_INT_RAW_STS, val,
|
|
val & SPRD_SPI_RX_END_IRQ, 0, us);
|
|
if (ret) {
|
|
dev_err(ss->dev, "SPI error, spi rx timeout!\n");
|
|
return ret;
|
|
}
|
|
|
|
writel_relaxed(SPRD_SPI_RX_END_INT_CLR, ss->base + SPRD_SPI_INT_CLR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sprd_spi_tx_req(struct sprd_spi *ss)
|
|
{
|
|
writel_relaxed(SPRD_SPI_SW_TX_REQ, ss->base + SPRD_SPI_CTL12);
|
|
}
|
|
|
|
static void sprd_spi_rx_req(struct sprd_spi *ss)
|
|
{
|
|
writel_relaxed(SPRD_SPI_SW_RX_REQ, ss->base + SPRD_SPI_CTL12);
|
|
}
|
|
|
|
static void sprd_spi_enter_idle(struct sprd_spi *ss)
|
|
{
|
|
u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL1);
|
|
|
|
val &= ~SPRD_SPI_RTX_MD_MASK;
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL1);
|
|
}
|
|
|
|
static void sprd_spi_set_transfer_bits(struct sprd_spi *ss, u32 bits)
|
|
{
|
|
u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL0);
|
|
|
|
/* Set the valid bits for every transaction */
|
|
val &= ~(SPRD_SPI_CHNL_LEN_MASK << SPRD_SPI_CHNL_LEN);
|
|
val |= bits << SPRD_SPI_CHNL_LEN;
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL0);
|
|
}
|
|
|
|
static void sprd_spi_set_tx_length(struct sprd_spi *ss, u32 length)
|
|
{
|
|
u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL8);
|
|
|
|
length &= SPRD_SPI_TX_MAX_LEN_MASK;
|
|
val &= ~SPRD_SPI_TX_LEN_H_MASK;
|
|
val |= length >> SPRD_SPI_TX_LEN_H_OFFSET;
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL8);
|
|
|
|
val = length & SPRD_SPI_TX_LEN_L_MASK;
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL9);
|
|
}
|
|
|
|
static void sprd_spi_set_rx_length(struct sprd_spi *ss, u32 length)
|
|
{
|
|
u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL10);
|
|
|
|
length &= SPRD_SPI_RX_MAX_LEN_MASK;
|
|
val &= ~SPRD_SPI_RX_LEN_H_MASK;
|
|
val |= length >> SPRD_SPI_RX_LEN_H_OFFSET;
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL10);
|
|
|
|
val = length & SPRD_SPI_RX_LEN_L_MASK;
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL11);
|
|
}
|
|
|
|
static void sprd_spi_chipselect(struct spi_device *sdev, bool cs)
|
|
{
|
|
struct spi_controller *sctlr = sdev->controller;
|
|
struct sprd_spi *ss = spi_controller_get_devdata(sctlr);
|
|
u32 val;
|
|
|
|
val = readl_relaxed(ss->base + SPRD_SPI_CTL0);
|
|
/* The SPI controller will pull down CS pin if cs is 0 */
|
|
if (!cs) {
|
|
val &= ~SPRD_SPI_CS0_VALID;
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL0);
|
|
} else {
|
|
val |= SPRD_SPI_CSN_MASK;
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL0);
|
|
}
|
|
}
|
|
|
|
static int sprd_spi_write_only_receive(struct sprd_spi *ss, u32 len)
|
|
{
|
|
u32 val;
|
|
|
|
/* Clear the start receive bit and reset receive data number */
|
|
val = readl_relaxed(ss->base + SPRD_SPI_CTL4);
|
|
val &= ~(SPRD_SPI_START_RX | SPRD_SPI_ONLY_RECV_MASK);
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL4);
|
|
|
|
/* Set the receive data length */
|
|
val = readl_relaxed(ss->base + SPRD_SPI_CTL4);
|
|
val |= len & SPRD_SPI_ONLY_RECV_MASK;
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL4);
|
|
|
|
/* Trigger to receive data */
|
|
val = readl_relaxed(ss->base + SPRD_SPI_CTL4);
|
|
val |= SPRD_SPI_START_RX;
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL4);
|
|
|
|
return len;
|
|
}
|
|
|
|
static int sprd_spi_write_bufs_u8(struct sprd_spi *ss, u32 len)
|
|
{
|
|
u8 *tx_p = (u8 *)ss->tx_buf;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
writeb_relaxed(tx_p[i], ss->base + SPRD_SPI_TXD);
|
|
|
|
ss->tx_buf += i;
|
|
return i;
|
|
}
|
|
|
|
static int sprd_spi_write_bufs_u16(struct sprd_spi *ss, u32 len)
|
|
{
|
|
u16 *tx_p = (u16 *)ss->tx_buf;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
writew_relaxed(tx_p[i], ss->base + SPRD_SPI_TXD);
|
|
|
|
ss->tx_buf += i << 1;
|
|
return i << 1;
|
|
}
|
|
|
|
static int sprd_spi_write_bufs_u32(struct sprd_spi *ss, u32 len)
|
|
{
|
|
u32 *tx_p = (u32 *)ss->tx_buf;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
writel_relaxed(tx_p[i], ss->base + SPRD_SPI_TXD);
|
|
|
|
ss->tx_buf += i << 2;
|
|
return i << 2;
|
|
}
|
|
|
|
static int sprd_spi_read_bufs_u8(struct sprd_spi *ss, u32 len)
|
|
{
|
|
u8 *rx_p = (u8 *)ss->rx_buf;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
rx_p[i] = readb_relaxed(ss->base + SPRD_SPI_TXD);
|
|
|
|
ss->rx_buf += i;
|
|
return i;
|
|
}
|
|
|
|
static int sprd_spi_read_bufs_u16(struct sprd_spi *ss, u32 len)
|
|
{
|
|
u16 *rx_p = (u16 *)ss->rx_buf;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
rx_p[i] = readw_relaxed(ss->base + SPRD_SPI_TXD);
|
|
|
|
ss->rx_buf += i << 1;
|
|
return i << 1;
|
|
}
|
|
|
|
static int sprd_spi_read_bufs_u32(struct sprd_spi *ss, u32 len)
|
|
{
|
|
u32 *rx_p = (u32 *)ss->rx_buf;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
rx_p[i] = readl_relaxed(ss->base + SPRD_SPI_TXD);
|
|
|
|
ss->rx_buf += i << 2;
|
|
return i << 2;
|
|
}
|
|
|
|
static int sprd_spi_txrx_bufs(struct spi_device *sdev, struct spi_transfer *t)
|
|
{
|
|
struct sprd_spi *ss = spi_controller_get_devdata(sdev->controller);
|
|
u32 trans_len = ss->trans_len, len;
|
|
int ret, write_size = 0, read_size = 0;
|
|
|
|
while (trans_len) {
|
|
len = trans_len > SPRD_SPI_FIFO_SIZE ? SPRD_SPI_FIFO_SIZE :
|
|
trans_len;
|
|
if (ss->trans_mode & SPRD_SPI_TX_MODE) {
|
|
sprd_spi_set_tx_length(ss, len);
|
|
write_size += ss->write_bufs(ss, len);
|
|
|
|
/*
|
|
* For our 3 wires mode or dual TX line mode, we need
|
|
* to request the controller to transfer.
|
|
*/
|
|
if (ss->hw_mode & SPI_3WIRE || ss->hw_mode & SPI_TX_DUAL)
|
|
sprd_spi_tx_req(ss);
|
|
|
|
ret = sprd_spi_wait_for_tx_end(ss, t);
|
|
} else {
|
|
sprd_spi_set_rx_length(ss, len);
|
|
|
|
/*
|
|
* For our 3 wires mode or dual TX line mode, we need
|
|
* to request the controller to read.
|
|
*/
|
|
if (ss->hw_mode & SPI_3WIRE || ss->hw_mode & SPI_TX_DUAL)
|
|
sprd_spi_rx_req(ss);
|
|
else
|
|
write_size += ss->write_bufs(ss, len);
|
|
|
|
ret = sprd_spi_wait_for_rx_end(ss, t);
|
|
}
|
|
|
|
if (ret)
|
|
goto complete;
|
|
|
|
if (ss->trans_mode & SPRD_SPI_RX_MODE)
|
|
read_size += ss->read_bufs(ss, len);
|
|
|
|
trans_len -= len;
|
|
}
|
|
|
|
if (ss->trans_mode & SPRD_SPI_TX_MODE)
|
|
ret = write_size;
|
|
else
|
|
ret = read_size;
|
|
complete:
|
|
sprd_spi_enter_idle(ss);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sprd_spi_irq_enable(struct sprd_spi *ss)
|
|
{
|
|
u32 val;
|
|
|
|
/* Clear interrupt status before enabling interrupt. */
|
|
writel_relaxed(SPRD_SPI_TX_END_CLR | SPRD_SPI_RX_END_CLR,
|
|
ss->base + SPRD_SPI_INT_CLR);
|
|
/* Enable SPI interrupt only in DMA mode. */
|
|
val = readl_relaxed(ss->base + SPRD_SPI_INT_EN);
|
|
writel_relaxed(val | SPRD_SPI_TX_END_INT_EN |
|
|
SPRD_SPI_RX_END_INT_EN,
|
|
ss->base + SPRD_SPI_INT_EN);
|
|
}
|
|
|
|
static void sprd_spi_irq_disable(struct sprd_spi *ss)
|
|
{
|
|
writel_relaxed(0, ss->base + SPRD_SPI_INT_EN);
|
|
}
|
|
|
|
static void sprd_spi_dma_enable(struct sprd_spi *ss, bool enable)
|
|
{
|
|
u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL2);
|
|
|
|
if (enable)
|
|
val |= SPRD_SPI_DMA_EN;
|
|
else
|
|
val &= ~SPRD_SPI_DMA_EN;
|
|
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL2);
|
|
}
|
|
|
|
static int sprd_spi_dma_submit(struct dma_chan *dma_chan,
|
|
struct dma_slave_config *c,
|
|
struct sg_table *sg,
|
|
enum dma_transfer_direction dir)
|
|
{
|
|
struct dma_async_tx_descriptor *desc;
|
|
dma_cookie_t cookie;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
ret = dmaengine_slave_config(dma_chan, c);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
flags = SPRD_DMA_FLAGS(SPRD_DMA_CHN_MODE_NONE, SPRD_DMA_NO_TRG,
|
|
SPRD_DMA_FRAG_REQ, SPRD_DMA_TRANS_INT);
|
|
desc = dmaengine_prep_slave_sg(dma_chan, sg->sgl, sg->nents, dir, flags);
|
|
if (!desc)
|
|
return -ENODEV;
|
|
|
|
cookie = dmaengine_submit(desc);
|
|
if (dma_submit_error(cookie))
|
|
return dma_submit_error(cookie);
|
|
|
|
dma_async_issue_pending(dma_chan);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sprd_spi_dma_rx_config(struct sprd_spi *ss, struct spi_transfer *t)
|
|
{
|
|
struct dma_chan *dma_chan = ss->dma.dma_chan[SPRD_SPI_RX];
|
|
struct dma_slave_config config = {
|
|
.src_addr = ss->phy_base,
|
|
.src_addr_width = ss->dma.width,
|
|
.dst_addr_width = ss->dma.width,
|
|
.dst_maxburst = ss->dma.fragmens_len,
|
|
};
|
|
int ret;
|
|
|
|
ret = sprd_spi_dma_submit(dma_chan, &config, &t->rx_sg, DMA_DEV_TO_MEM);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ss->dma.rx_len;
|
|
}
|
|
|
|
static int sprd_spi_dma_tx_config(struct sprd_spi *ss, struct spi_transfer *t)
|
|
{
|
|
struct dma_chan *dma_chan = ss->dma.dma_chan[SPRD_SPI_TX];
|
|
struct dma_slave_config config = {
|
|
.dst_addr = ss->phy_base,
|
|
.src_addr_width = ss->dma.width,
|
|
.dst_addr_width = ss->dma.width,
|
|
.src_maxburst = ss->dma.fragmens_len,
|
|
};
|
|
int ret;
|
|
|
|
ret = sprd_spi_dma_submit(dma_chan, &config, &t->tx_sg, DMA_MEM_TO_DEV);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return t->len;
|
|
}
|
|
|
|
static int sprd_spi_dma_request(struct sprd_spi *ss)
|
|
{
|
|
ss->dma.dma_chan[SPRD_SPI_RX] = dma_request_chan(ss->dev, "rx_chn");
|
|
if (IS_ERR_OR_NULL(ss->dma.dma_chan[SPRD_SPI_RX])) {
|
|
if (PTR_ERR(ss->dma.dma_chan[SPRD_SPI_RX]) == -EPROBE_DEFER)
|
|
return PTR_ERR(ss->dma.dma_chan[SPRD_SPI_RX]);
|
|
|
|
dev_err(ss->dev, "request RX DMA channel failed!\n");
|
|
return PTR_ERR(ss->dma.dma_chan[SPRD_SPI_RX]);
|
|
}
|
|
|
|
ss->dma.dma_chan[SPRD_SPI_TX] = dma_request_chan(ss->dev, "tx_chn");
|
|
if (IS_ERR_OR_NULL(ss->dma.dma_chan[SPRD_SPI_TX])) {
|
|
if (PTR_ERR(ss->dma.dma_chan[SPRD_SPI_TX]) == -EPROBE_DEFER)
|
|
return PTR_ERR(ss->dma.dma_chan[SPRD_SPI_TX]);
|
|
|
|
dev_err(ss->dev, "request TX DMA channel failed!\n");
|
|
dma_release_channel(ss->dma.dma_chan[SPRD_SPI_RX]);
|
|
return PTR_ERR(ss->dma.dma_chan[SPRD_SPI_TX]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sprd_spi_dma_release(struct sprd_spi *ss)
|
|
{
|
|
if (ss->dma.dma_chan[SPRD_SPI_RX])
|
|
dma_release_channel(ss->dma.dma_chan[SPRD_SPI_RX]);
|
|
|
|
if (ss->dma.dma_chan[SPRD_SPI_TX])
|
|
dma_release_channel(ss->dma.dma_chan[SPRD_SPI_TX]);
|
|
}
|
|
|
|
static int sprd_spi_dma_txrx_bufs(struct spi_device *sdev,
|
|
struct spi_transfer *t)
|
|
{
|
|
struct sprd_spi *ss = spi_master_get_devdata(sdev->master);
|
|
u32 trans_len = ss->trans_len;
|
|
int ret, write_size = 0;
|
|
|
|
reinit_completion(&ss->xfer_completion);
|
|
sprd_spi_irq_enable(ss);
|
|
if (ss->trans_mode & SPRD_SPI_TX_MODE) {
|
|
write_size = sprd_spi_dma_tx_config(ss, t);
|
|
sprd_spi_set_tx_length(ss, trans_len);
|
|
|
|
/*
|
|
* For our 3 wires mode or dual TX line mode, we need
|
|
* to request the controller to transfer.
|
|
*/
|
|
if (ss->hw_mode & SPI_3WIRE || ss->hw_mode & SPI_TX_DUAL)
|
|
sprd_spi_tx_req(ss);
|
|
} else {
|
|
sprd_spi_set_rx_length(ss, trans_len);
|
|
|
|
/*
|
|
* For our 3 wires mode or dual TX line mode, we need
|
|
* to request the controller to read.
|
|
*/
|
|
if (ss->hw_mode & SPI_3WIRE || ss->hw_mode & SPI_TX_DUAL)
|
|
sprd_spi_rx_req(ss);
|
|
else
|
|
write_size = ss->write_bufs(ss, trans_len);
|
|
}
|
|
|
|
if (write_size < 0) {
|
|
ret = write_size;
|
|
dev_err(ss->dev, "failed to write, ret = %d\n", ret);
|
|
goto trans_complete;
|
|
}
|
|
|
|
if (ss->trans_mode & SPRD_SPI_RX_MODE) {
|
|
/*
|
|
* Set up the DMA receive data length, which must be an
|
|
* integral multiple of fragment length. But when the length
|
|
* of received data is less than fragment length, DMA can be
|
|
* configured to receive data according to the actual length
|
|
* of received data.
|
|
*/
|
|
ss->dma.rx_len = t->len > ss->dma.fragmens_len ?
|
|
(t->len - t->len % ss->dma.fragmens_len) :
|
|
t->len;
|
|
ret = sprd_spi_dma_rx_config(ss, t);
|
|
if (ret < 0) {
|
|
dev_err(&sdev->dev,
|
|
"failed to configure rx DMA, ret = %d\n", ret);
|
|
goto trans_complete;
|
|
}
|
|
}
|
|
|
|
sprd_spi_dma_enable(ss, true);
|
|
wait_for_completion(&(ss->xfer_completion));
|
|
|
|
if (ss->trans_mode & SPRD_SPI_TX_MODE)
|
|
ret = write_size;
|
|
else
|
|
ret = ss->dma.rx_len;
|
|
|
|
trans_complete:
|
|
sprd_spi_dma_enable(ss, false);
|
|
sprd_spi_enter_idle(ss);
|
|
sprd_spi_irq_disable(ss);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sprd_spi_set_speed(struct sprd_spi *ss, u32 speed_hz)
|
|
{
|
|
/*
|
|
* From SPI datasheet, the prescale calculation formula:
|
|
* prescale = SPI source clock / (2 * SPI_freq) - 1;
|
|
*/
|
|
u32 clk_div = DIV_ROUND_UP(ss->src_clk, speed_hz << 1) - 1;
|
|
|
|
/* Save the real hardware speed */
|
|
ss->hw_speed_hz = (ss->src_clk >> 1) / (clk_div + 1);
|
|
writel_relaxed(clk_div, ss->base + SPRD_SPI_CLKD);
|
|
}
|
|
|
|
static void sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t)
|
|
{
|
|
u16 word_delay, interval;
|
|
u32 val;
|
|
|
|
val = readl_relaxed(ss->base + SPRD_SPI_CTL7);
|
|
val &= ~(SPRD_SPI_SCK_REV | SPRD_SPI_NG_TX | SPRD_SPI_NG_RX);
|
|
/* Set default chip selection, clock phase and clock polarity */
|
|
val |= ss->hw_mode & SPI_CPHA ? SPRD_SPI_NG_RX : SPRD_SPI_NG_TX;
|
|
val |= ss->hw_mode & SPI_CPOL ? SPRD_SPI_SCK_REV : 0;
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL0);
|
|
|
|
/*
|
|
* Set the intervals of two SPI frames, and the inteval calculation
|
|
* formula as below per datasheet:
|
|
* interval time (source clock cycles) = interval * 4 + 10.
|
|
*/
|
|
word_delay = clamp_t(u16, t->word_delay, SPRD_SPI_MIN_DELAY_CYCLE,
|
|
SPRD_SPI_MAX_DELAY_CYCLE);
|
|
interval = DIV_ROUND_UP(word_delay - 10, 4);
|
|
ss->word_delay = interval * 4 + 10;
|
|
writel_relaxed(interval, ss->base + SPRD_SPI_CTL5);
|
|
|
|
/* Reset SPI fifo */
|
|
writel_relaxed(1, ss->base + SPRD_SPI_FIFO_RST);
|
|
writel_relaxed(0, ss->base + SPRD_SPI_FIFO_RST);
|
|
|
|
/* Set SPI work mode */
|
|
val = readl_relaxed(ss->base + SPRD_SPI_CTL7);
|
|
val &= ~SPRD_SPI_MODE_MASK;
|
|
|
|
if (ss->hw_mode & SPI_3WIRE)
|
|
val |= SPRD_SPI_3WIRE_MODE << SPRD_SPI_MODE_OFFSET;
|
|
else
|
|
val |= SPRD_SPI_4WIRE_MODE << SPRD_SPI_MODE_OFFSET;
|
|
|
|
if (ss->hw_mode & SPI_TX_DUAL)
|
|
val |= SPRD_SPI_DATA_LINE2_EN;
|
|
else
|
|
val &= ~SPRD_SPI_DATA_LINE2_EN;
|
|
|
|
writel_relaxed(val, ss->base + SPRD_SPI_CTL7);
|
|
}
|
|
|
|
static int sprd_spi_setup_transfer(struct spi_device *sdev,
|
|
struct spi_transfer *t)
|
|
{
|
|
struct sprd_spi *ss = spi_controller_get_devdata(sdev->controller);
|
|
u8 bits_per_word = t->bits_per_word;
|
|
u32 val, mode = 0;
|
|
|
|
ss->len = t->len;
|
|
ss->tx_buf = t->tx_buf;
|
|
ss->rx_buf = t->rx_buf;
|
|
|
|
ss->hw_mode = sdev->mode;
|
|
sprd_spi_init_hw(ss, t);
|
|
|
|
/* Set tansfer speed and valid bits */
|
|
sprd_spi_set_speed(ss, t->speed_hz);
|
|
sprd_spi_set_transfer_bits(ss, bits_per_word);
|
|
|
|
if (bits_per_word > 16)
|
|
bits_per_word = round_up(bits_per_word, 16);
|
|
else
|
|
bits_per_word = round_up(bits_per_word, 8);
|
|
|
|
switch (bits_per_word) {
|
|
case 8:
|
|
ss->trans_len = t->len;
|
|
ss->read_bufs = sprd_spi_read_bufs_u8;
|
|
ss->write_bufs = sprd_spi_write_bufs_u8;
|
|
ss->dma.width = DMA_SLAVE_BUSWIDTH_1_BYTE;
|
|
ss->dma.fragmens_len = SPRD_SPI_DMA_STEP;
|
|
break;
|
|
case 16:
|
|
ss->trans_len = t->len >> 1;
|
|
ss->read_bufs = sprd_spi_read_bufs_u16;
|
|
ss->write_bufs = sprd_spi_write_bufs_u16;
|
|
ss->dma.width = DMA_SLAVE_BUSWIDTH_2_BYTES;
|
|
ss->dma.fragmens_len = SPRD_SPI_DMA_STEP << 1;
|
|
break;
|
|
case 32:
|
|
ss->trans_len = t->len >> 2;
|
|
ss->read_bufs = sprd_spi_read_bufs_u32;
|
|
ss->write_bufs = sprd_spi_write_bufs_u32;
|
|
ss->dma.width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
ss->dma.fragmens_len = SPRD_SPI_DMA_STEP << 2;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set transfer read or write mode */
|
|
val = readl_relaxed(ss->base + SPRD_SPI_CTL1);
|
|
val &= ~SPRD_SPI_RTX_MD_MASK;
|
|
if (t->tx_buf)
|
|
mode |= SPRD_SPI_TX_MODE;
|
|
if (t->rx_buf)
|
|
mode |= SPRD_SPI_RX_MODE;
|
|
|
|
writel_relaxed(val | mode, ss->base + SPRD_SPI_CTL1);
|
|
|
|
ss->trans_mode = mode;
|
|
|
|
/*
|
|
* If in only receive mode, we need to trigger the SPI controller to
|
|
* receive data automatically.
|
|
*/
|
|
if (ss->trans_mode == SPRD_SPI_RX_MODE)
|
|
ss->write_bufs = sprd_spi_write_only_receive;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sprd_spi_transfer_one(struct spi_controller *sctlr,
|
|
struct spi_device *sdev,
|
|
struct spi_transfer *t)
|
|
{
|
|
int ret;
|
|
|
|
ret = sprd_spi_setup_transfer(sdev, t);
|
|
if (ret)
|
|
goto setup_err;
|
|
|
|
if (sctlr->can_dma(sctlr, sdev, t))
|
|
ret = sprd_spi_dma_txrx_bufs(sdev, t);
|
|
else
|
|
ret = sprd_spi_txrx_bufs(sdev, t);
|
|
|
|
if (ret == t->len)
|
|
ret = 0;
|
|
else if (ret >= 0)
|
|
ret = -EREMOTEIO;
|
|
|
|
setup_err:
|
|
spi_finalize_current_transfer(sctlr);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t sprd_spi_handle_irq(int irq, void *data)
|
|
{
|
|
struct sprd_spi *ss = (struct sprd_spi *)data;
|
|
u32 val = readl_relaxed(ss->base + SPRD_SPI_INT_MASK_STS);
|
|
|
|
if (val & SPRD_SPI_MASK_TX_END) {
|
|
writel_relaxed(SPRD_SPI_TX_END_CLR, ss->base + SPRD_SPI_INT_CLR);
|
|
if (!(ss->trans_mode & SPRD_SPI_RX_MODE))
|
|
complete(&ss->xfer_completion);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (val & SPRD_SPI_MASK_RX_END) {
|
|
writel_relaxed(SPRD_SPI_RX_END_CLR, ss->base + SPRD_SPI_INT_CLR);
|
|
if (ss->dma.rx_len < ss->len) {
|
|
ss->rx_buf += ss->dma.rx_len;
|
|
ss->dma.rx_len +=
|
|
ss->read_bufs(ss, ss->len - ss->dma.rx_len);
|
|
}
|
|
complete(&ss->xfer_completion);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int sprd_spi_irq_init(struct platform_device *pdev, struct sprd_spi *ss)
|
|
{
|
|
int ret;
|
|
|
|
ss->irq = platform_get_irq(pdev, 0);
|
|
if (ss->irq < 0) {
|
|
dev_err(&pdev->dev, "failed to get irq resource\n");
|
|
return ss->irq;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, ss->irq, sprd_spi_handle_irq,
|
|
0, pdev->name, ss);
|
|
if (ret)
|
|
dev_err(&pdev->dev, "failed to request spi irq %d, ret = %d\n",
|
|
ss->irq, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sprd_spi_clk_init(struct platform_device *pdev, struct sprd_spi *ss)
|
|
{
|
|
struct clk *clk_spi, *clk_parent;
|
|
|
|
clk_spi = devm_clk_get(&pdev->dev, "spi");
|
|
if (IS_ERR(clk_spi)) {
|
|
dev_warn(&pdev->dev, "can't get the spi clock\n");
|
|
clk_spi = NULL;
|
|
}
|
|
|
|
clk_parent = devm_clk_get(&pdev->dev, "source");
|
|
if (IS_ERR(clk_parent)) {
|
|
dev_warn(&pdev->dev, "can't get the source clock\n");
|
|
clk_parent = NULL;
|
|
}
|
|
|
|
ss->clk = devm_clk_get(&pdev->dev, "enable");
|
|
if (IS_ERR(ss->clk)) {
|
|
dev_err(&pdev->dev, "can't get the enable clock\n");
|
|
return PTR_ERR(ss->clk);
|
|
}
|
|
|
|
if (!clk_set_parent(clk_spi, clk_parent))
|
|
ss->src_clk = clk_get_rate(clk_spi);
|
|
else
|
|
ss->src_clk = SPRD_SPI_DEFAULT_SOURCE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool sprd_spi_can_dma(struct spi_controller *sctlr,
|
|
struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct sprd_spi *ss = spi_controller_get_devdata(sctlr);
|
|
|
|
return ss->dma.enable && (t->len > SPRD_SPI_FIFO_SIZE);
|
|
}
|
|
|
|
static int sprd_spi_dma_init(struct platform_device *pdev, struct sprd_spi *ss)
|
|
{
|
|
int ret;
|
|
|
|
ret = sprd_spi_dma_request(ss);
|
|
if (ret) {
|
|
if (ret == -EPROBE_DEFER)
|
|
return ret;
|
|
|
|
dev_warn(&pdev->dev,
|
|
"failed to request dma, enter no dma mode, ret = %d\n",
|
|
ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
ss->dma.enable = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sprd_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *sctlr;
|
|
struct resource *res;
|
|
struct sprd_spi *ss;
|
|
int ret;
|
|
|
|
pdev->id = of_alias_get_id(pdev->dev.of_node, "spi");
|
|
sctlr = spi_alloc_master(&pdev->dev, sizeof(*ss));
|
|
if (!sctlr)
|
|
return -ENOMEM;
|
|
|
|
ss = spi_controller_get_devdata(sctlr);
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
ss->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(ss->base)) {
|
|
ret = PTR_ERR(ss->base);
|
|
goto free_controller;
|
|
}
|
|
|
|
ss->phy_base = res->start;
|
|
ss->dev = &pdev->dev;
|
|
sctlr->dev.of_node = pdev->dev.of_node;
|
|
sctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_3WIRE | SPI_TX_DUAL;
|
|
sctlr->bus_num = pdev->id;
|
|
sctlr->set_cs = sprd_spi_chipselect;
|
|
sctlr->transfer_one = sprd_spi_transfer_one;
|
|
sctlr->can_dma = sprd_spi_can_dma;
|
|
sctlr->auto_runtime_pm = true;
|
|
sctlr->max_speed_hz = min_t(u32, ss->src_clk >> 1,
|
|
SPRD_SPI_MAX_SPEED_HZ);
|
|
|
|
init_completion(&ss->xfer_completion);
|
|
platform_set_drvdata(pdev, sctlr);
|
|
ret = sprd_spi_clk_init(pdev, ss);
|
|
if (ret)
|
|
goto free_controller;
|
|
|
|
ret = sprd_spi_irq_init(pdev, ss);
|
|
if (ret)
|
|
goto free_controller;
|
|
|
|
ret = sprd_spi_dma_init(pdev, ss);
|
|
if (ret)
|
|
goto free_controller;
|
|
|
|
ret = clk_prepare_enable(ss->clk);
|
|
if (ret)
|
|
goto release_dma;
|
|
|
|
ret = pm_runtime_set_active(&pdev->dev);
|
|
if (ret < 0)
|
|
goto disable_clk;
|
|
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev,
|
|
SPRD_SPI_AUTOSUSPEND_DELAY);
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
ret = pm_runtime_get_sync(&pdev->dev);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to resume SPI controller\n");
|
|
goto err_rpm_put;
|
|
}
|
|
|
|
ret = devm_spi_register_controller(&pdev->dev, sctlr);
|
|
if (ret)
|
|
goto err_rpm_put;
|
|
|
|
pm_runtime_mark_last_busy(&pdev->dev);
|
|
pm_runtime_put_autosuspend(&pdev->dev);
|
|
|
|
return 0;
|
|
|
|
err_rpm_put:
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
disable_clk:
|
|
clk_disable_unprepare(ss->clk);
|
|
release_dma:
|
|
sprd_spi_dma_release(ss);
|
|
free_controller:
|
|
spi_controller_put(sctlr);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sprd_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *sctlr = platform_get_drvdata(pdev);
|
|
struct sprd_spi *ss = spi_controller_get_devdata(sctlr);
|
|
int ret;
|
|
|
|
ret = pm_runtime_get_sync(ss->dev);
|
|
if (ret < 0) {
|
|
dev_err(ss->dev, "failed to resume SPI controller\n");
|
|
return ret;
|
|
}
|
|
|
|
spi_controller_suspend(sctlr);
|
|
|
|
if (ss->dma.enable)
|
|
sprd_spi_dma_release(ss);
|
|
clk_disable_unprepare(ss->clk);
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused sprd_spi_runtime_suspend(struct device *dev)
|
|
{
|
|
struct spi_controller *sctlr = dev_get_drvdata(dev);
|
|
struct sprd_spi *ss = spi_controller_get_devdata(sctlr);
|
|
|
|
if (ss->dma.enable)
|
|
sprd_spi_dma_release(ss);
|
|
|
|
clk_disable_unprepare(ss->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused sprd_spi_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_controller *sctlr = dev_get_drvdata(dev);
|
|
struct sprd_spi *ss = spi_controller_get_devdata(sctlr);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(ss->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!ss->dma.enable)
|
|
return 0;
|
|
|
|
ret = sprd_spi_dma_request(ss);
|
|
if (ret)
|
|
clk_disable_unprepare(ss->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops sprd_spi_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(sprd_spi_runtime_suspend,
|
|
sprd_spi_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct of_device_id sprd_spi_of_match[] = {
|
|
{ .compatible = "sprd,sc9860-spi", },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static struct platform_driver sprd_spi_driver = {
|
|
.driver = {
|
|
.name = "sprd-spi",
|
|
.of_match_table = sprd_spi_of_match,
|
|
.pm = &sprd_spi_pm_ops,
|
|
},
|
|
.probe = sprd_spi_probe,
|
|
.remove = sprd_spi_remove,
|
|
};
|
|
|
|
module_platform_driver(sprd_spi_driver);
|
|
|
|
MODULE_DESCRIPTION("Spreadtrum SPI Controller driver");
|
|
MODULE_AUTHOR("Lanqing Liu <lanqing.liu@spreadtrum.com>");
|
|
MODULE_LICENSE("GPL v2");
|