linux_dsm_epyc7002/drivers/clk/clk.c
Linus Torvalds 916f562fb2 This round of clk driver and framework updates is heavy on the driver update
side. The two main highlights in the core framework are the addition of an bulk
 clk_get API that handles optional clks and an extra debugfs file that tells the
 developer about the current parent of a clk.
 
 The driver updates are dominated by i.MX in the diffstat, but that is mostly
 because that SoC has started converting to the clk_hw style of clk
 registration. The next big update is in the Amlogic meson clk driver that
 gained some support for audio, cpu, and temperature clks while fixing some PLL
 issues. Finally, the biggest thing that stands out is the conversion of a large
 part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
 less strings and more pointer comparisons to match clk parents and children up.
 
 In general, it looks like we have a lot of little fixes and tweaks here and
 there to clk data along with the normal addition of a handful of new drivers
 and a couple new core framework features.
 
 Core:
  - Add a 'clk_parent' file in clk debugfs
  - Add a clk_bulk_get_optional() API (with devm too)
 
 New Drivers:
  - Support gated clk controller on MIPS based BCM63XX SoCs
  - Support SiLabs Si5341 and Si5340 chips
  - Support for CPU clks on Raspberry Pi devices
  - Audsys clock driver for MediaTek MT8516 SoCs
 
 Updates:
  - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
  - Small frequency support for SiLabs Si544 chips
  - Slow clk support for AT91 SAM9X60 SoCs
  - Remove dead code in various clk drivers (-Wunused)
  - Support for Marvell 98DX1135 SoCs
  - Get duty cycle of generic pwm clks
  - Improvement in mmc phase calculation and cleanup of some rate defintions
  - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
  - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
  - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
  - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
  - Add clks for new Exynos5422 Dynamic Memory Controller driver
  - Clock definition for Exynos4412 Mali
  - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
  - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
  - TI clock probing done from DT by default instead of firmware
  - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
  - Add Amlogic meson8 audio clocks
  - Add Amlogic g12a temperature sensors clocks
  - Add Amlogic g12a and g12b cpu clocks
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
  - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
  - Add Clock Domain support on Renesas RZ/N1
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0uBEERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSWucw/9ELKlfvdxrc8mdIuzt+CpKdNiSG88shXY
 hF+vnuE6Jhv5hmlbA/DbplPTAnHT/FQF65/GPQMAYy2wYO6CjleNxQyepiVv4h8/
 tWoXu5vYZXubtQyMnYTffREzjYFPBNAscLUhXNwJKRno7nT0qKCk62WgOMfaW/KN
 lP5dKmrL7rdJDUvxHEStrwP515Lg5Wkhj3+XzgbgFUKGuGlvHfwUOEZucT++kqhu
 Z1vMjPv2ksHQf3r15BsbX/6jMIONEt2Xd6jA3Lm7ebDXJl2hjX4Gq0Kkl5pmkj2w
 F0V7Tw4XYk6DkSl7HQaOBgQ8KV0Mw2L8Vj6eEDhUwx6wPGlQ5YTKkUCJkjs0mUyb
 UpO3TuPFN2W0hsTNDzwYpjqcfodDn159XJcduv1/ZpIanUvHgx0uVzQ7iwwYwW+l
 VR4SipY5AEn9hpief30X7TAUSKsE4do58imYeoGBrq78zdsJaEcDAMX7AcYdXVQ9
 ahBS8ME/d1JEBNdRsSW7eTAfu8dZdI08uR8/T37GRG59XyZSjsyVmZ6kHCYrBygF
 AyLNMsXMCbW1rOoIpWkuGMD86XZy40laLg8T7WWTaq28t1VQ0BaBTGM4/eEexs3p
 FhZ1M7aH+PsDLrI2IGTBt/4xAMv+dhDS7HnxRlOONbWnLWVqmR+tYzF0aCkqJCmd
 O2zWCGffeYs=
 =mK0C
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...
2019-07-17 10:07:48 -07:00

4715 lines
116 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com>
* Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
*
* Standard functionality for the common clock API. See Documentation/driver-api/clk.rst
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clk/clk-conf.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/err.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/pm_runtime.h>
#include <linux/sched.h>
#include <linux/clkdev.h>
#include "clk.h"
static DEFINE_SPINLOCK(enable_lock);
static DEFINE_MUTEX(prepare_lock);
static struct task_struct *prepare_owner;
static struct task_struct *enable_owner;
static int prepare_refcnt;
static int enable_refcnt;
static HLIST_HEAD(clk_root_list);
static HLIST_HEAD(clk_orphan_list);
static LIST_HEAD(clk_notifier_list);
/*** private data structures ***/
struct clk_parent_map {
const struct clk_hw *hw;
struct clk_core *core;
const char *fw_name;
const char *name;
int index;
};
struct clk_core {
const char *name;
const struct clk_ops *ops;
struct clk_hw *hw;
struct module *owner;
struct device *dev;
struct device_node *of_node;
struct clk_core *parent;
struct clk_parent_map *parents;
u8 num_parents;
u8 new_parent_index;
unsigned long rate;
unsigned long req_rate;
unsigned long new_rate;
struct clk_core *new_parent;
struct clk_core *new_child;
unsigned long flags;
bool orphan;
bool rpm_enabled;
unsigned int enable_count;
unsigned int prepare_count;
unsigned int protect_count;
unsigned long min_rate;
unsigned long max_rate;
unsigned long accuracy;
int phase;
struct clk_duty duty;
struct hlist_head children;
struct hlist_node child_node;
struct hlist_head clks;
unsigned int notifier_count;
#ifdef CONFIG_DEBUG_FS
struct dentry *dentry;
struct hlist_node debug_node;
#endif
struct kref ref;
};
#define CREATE_TRACE_POINTS
#include <trace/events/clk.h>
struct clk {
struct clk_core *core;
struct device *dev;
const char *dev_id;
const char *con_id;
unsigned long min_rate;
unsigned long max_rate;
unsigned int exclusive_count;
struct hlist_node clks_node;
};
/*** runtime pm ***/
static int clk_pm_runtime_get(struct clk_core *core)
{
int ret;
if (!core->rpm_enabled)
return 0;
ret = pm_runtime_get_sync(core->dev);
return ret < 0 ? ret : 0;
}
static void clk_pm_runtime_put(struct clk_core *core)
{
if (!core->rpm_enabled)
return;
pm_runtime_put_sync(core->dev);
}
/*** locking ***/
static void clk_prepare_lock(void)
{
if (!mutex_trylock(&prepare_lock)) {
if (prepare_owner == current) {
prepare_refcnt++;
return;
}
mutex_lock(&prepare_lock);
}
WARN_ON_ONCE(prepare_owner != NULL);
WARN_ON_ONCE(prepare_refcnt != 0);
prepare_owner = current;
prepare_refcnt = 1;
}
static void clk_prepare_unlock(void)
{
WARN_ON_ONCE(prepare_owner != current);
WARN_ON_ONCE(prepare_refcnt == 0);
if (--prepare_refcnt)
return;
prepare_owner = NULL;
mutex_unlock(&prepare_lock);
}
static unsigned long clk_enable_lock(void)
__acquires(enable_lock)
{
unsigned long flags;
/*
* On UP systems, spin_trylock_irqsave() always returns true, even if
* we already hold the lock. So, in that case, we rely only on
* reference counting.
*/
if (!IS_ENABLED(CONFIG_SMP) ||
!spin_trylock_irqsave(&enable_lock, flags)) {
if (enable_owner == current) {
enable_refcnt++;
__acquire(enable_lock);
if (!IS_ENABLED(CONFIG_SMP))
local_save_flags(flags);
return flags;
}
spin_lock_irqsave(&enable_lock, flags);
}
WARN_ON_ONCE(enable_owner != NULL);
WARN_ON_ONCE(enable_refcnt != 0);
enable_owner = current;
enable_refcnt = 1;
return flags;
}
static void clk_enable_unlock(unsigned long flags)
__releases(enable_lock)
{
WARN_ON_ONCE(enable_owner != current);
WARN_ON_ONCE(enable_refcnt == 0);
if (--enable_refcnt) {
__release(enable_lock);
return;
}
enable_owner = NULL;
spin_unlock_irqrestore(&enable_lock, flags);
}
static bool clk_core_rate_is_protected(struct clk_core *core)
{
return core->protect_count;
}
static bool clk_core_is_prepared(struct clk_core *core)
{
bool ret = false;
/*
* .is_prepared is optional for clocks that can prepare
* fall back to software usage counter if it is missing
*/
if (!core->ops->is_prepared)
return core->prepare_count;
if (!clk_pm_runtime_get(core)) {
ret = core->ops->is_prepared(core->hw);
clk_pm_runtime_put(core);
}
return ret;
}
static bool clk_core_is_enabled(struct clk_core *core)
{
bool ret = false;
/*
* .is_enabled is only mandatory for clocks that gate
* fall back to software usage counter if .is_enabled is missing
*/
if (!core->ops->is_enabled)
return core->enable_count;
/*
* Check if clock controller's device is runtime active before
* calling .is_enabled callback. If not, assume that clock is
* disabled, because we might be called from atomic context, from
* which pm_runtime_get() is not allowed.
* This function is called mainly from clk_disable_unused_subtree,
* which ensures proper runtime pm activation of controller before
* taking enable spinlock, but the below check is needed if one tries
* to call it from other places.
*/
if (core->rpm_enabled) {
pm_runtime_get_noresume(core->dev);
if (!pm_runtime_active(core->dev)) {
ret = false;
goto done;
}
}
ret = core->ops->is_enabled(core->hw);
done:
if (core->rpm_enabled)
pm_runtime_put(core->dev);
return ret;
}
/*** helper functions ***/
const char *__clk_get_name(const struct clk *clk)
{
return !clk ? NULL : clk->core->name;
}
EXPORT_SYMBOL_GPL(__clk_get_name);
const char *clk_hw_get_name(const struct clk_hw *hw)
{
return hw->core->name;
}
EXPORT_SYMBOL_GPL(clk_hw_get_name);
struct clk_hw *__clk_get_hw(struct clk *clk)
{
return !clk ? NULL : clk->core->hw;
}
EXPORT_SYMBOL_GPL(__clk_get_hw);
unsigned int clk_hw_get_num_parents(const struct clk_hw *hw)
{
return hw->core->num_parents;
}
EXPORT_SYMBOL_GPL(clk_hw_get_num_parents);
struct clk_hw *clk_hw_get_parent(const struct clk_hw *hw)
{
return hw->core->parent ? hw->core->parent->hw : NULL;
}
EXPORT_SYMBOL_GPL(clk_hw_get_parent);
static struct clk_core *__clk_lookup_subtree(const char *name,
struct clk_core *core)
{
struct clk_core *child;
struct clk_core *ret;
if (!strcmp(core->name, name))
return core;
hlist_for_each_entry(child, &core->children, child_node) {
ret = __clk_lookup_subtree(name, child);
if (ret)
return ret;
}
return NULL;
}
static struct clk_core *clk_core_lookup(const char *name)
{
struct clk_core *root_clk;
struct clk_core *ret;
if (!name)
return NULL;
/* search the 'proper' clk tree first */
hlist_for_each_entry(root_clk, &clk_root_list, child_node) {
ret = __clk_lookup_subtree(name, root_clk);
if (ret)
return ret;
}
/* if not found, then search the orphan tree */
hlist_for_each_entry(root_clk, &clk_orphan_list, child_node) {
ret = __clk_lookup_subtree(name, root_clk);
if (ret)
return ret;
}
return NULL;
}
/**
* clk_core_get - Find the clk_core parent of a clk
* @core: clk to find parent of
* @p_index: parent index to search for
*
* This is the preferred method for clk providers to find the parent of a
* clk when that parent is external to the clk controller. The parent_names
* array is indexed and treated as a local name matching a string in the device
* node's 'clock-names' property or as the 'con_id' matching the device's
* dev_name() in a clk_lookup. This allows clk providers to use their own
* namespace instead of looking for a globally unique parent string.
*
* For example the following DT snippet would allow a clock registered by the
* clock-controller@c001 that has a clk_init_data::parent_data array
* with 'xtal' in the 'name' member to find the clock provided by the
* clock-controller@f00abcd without needing to get the globally unique name of
* the xtal clk.
*
* parent: clock-controller@f00abcd {
* reg = <0xf00abcd 0xabcd>;
* #clock-cells = <0>;
* };
*
* clock-controller@c001 {
* reg = <0xc001 0xf00d>;
* clocks = <&parent>;
* clock-names = "xtal";
* #clock-cells = <1>;
* };
*
* Returns: -ENOENT when the provider can't be found or the clk doesn't
* exist in the provider. -EINVAL when the name can't be found. NULL when the
* provider knows about the clk but it isn't provided on this system.
* A valid clk_core pointer when the clk can be found in the provider.
*/
static struct clk_core *clk_core_get(struct clk_core *core, u8 p_index)
{
const char *name = core->parents[p_index].fw_name;
int index = core->parents[p_index].index;
struct clk_hw *hw = ERR_PTR(-ENOENT);
struct device *dev = core->dev;
const char *dev_id = dev ? dev_name(dev) : NULL;
struct device_node *np = core->of_node;
if (np && (name || index >= 0))
hw = of_clk_get_hw(np, index, name);
/*
* If the DT search above couldn't find the provider or the provider
* didn't know about this clk, fallback to looking up via clkdev based
* clk_lookups
*/
if (PTR_ERR(hw) == -ENOENT && name)
hw = clk_find_hw(dev_id, name);
if (IS_ERR(hw))
return ERR_CAST(hw);
return hw->core;
}
static void clk_core_fill_parent_index(struct clk_core *core, u8 index)
{
struct clk_parent_map *entry = &core->parents[index];
struct clk_core *parent = ERR_PTR(-ENOENT);
if (entry->hw) {
parent = entry->hw->core;
/*
* We have a direct reference but it isn't registered yet?
* Orphan it and let clk_reparent() update the orphan status
* when the parent is registered.
*/
if (!parent)
parent = ERR_PTR(-EPROBE_DEFER);
} else {
parent = clk_core_get(core, index);
if (IS_ERR(parent) && PTR_ERR(parent) == -ENOENT)
parent = clk_core_lookup(entry->name);
}
/* Only cache it if it's not an error */
if (!IS_ERR(parent))
entry->core = parent;
}
static struct clk_core *clk_core_get_parent_by_index(struct clk_core *core,
u8 index)
{
if (!core || index >= core->num_parents || !core->parents)
return NULL;
if (!core->parents[index].core)
clk_core_fill_parent_index(core, index);
return core->parents[index].core;
}
struct clk_hw *
clk_hw_get_parent_by_index(const struct clk_hw *hw, unsigned int index)
{
struct clk_core *parent;
parent = clk_core_get_parent_by_index(hw->core, index);
return !parent ? NULL : parent->hw;
}
EXPORT_SYMBOL_GPL(clk_hw_get_parent_by_index);
unsigned int __clk_get_enable_count(struct clk *clk)
{
return !clk ? 0 : clk->core->enable_count;
}
static unsigned long clk_core_get_rate_nolock(struct clk_core *core)
{
if (!core)
return 0;
if (!core->num_parents || core->parent)
return core->rate;
/*
* Clk must have a parent because num_parents > 0 but the parent isn't
* known yet. Best to return 0 as the rate of this clk until we can
* properly recalc the rate based on the parent's rate.
*/
return 0;
}
unsigned long clk_hw_get_rate(const struct clk_hw *hw)
{
return clk_core_get_rate_nolock(hw->core);
}
EXPORT_SYMBOL_GPL(clk_hw_get_rate);
static unsigned long __clk_get_accuracy(struct clk_core *core)
{
if (!core)
return 0;
return core->accuracy;
}
unsigned long __clk_get_flags(struct clk *clk)
{
return !clk ? 0 : clk->core->flags;
}
EXPORT_SYMBOL_GPL(__clk_get_flags);
unsigned long clk_hw_get_flags(const struct clk_hw *hw)
{
return hw->core->flags;
}
EXPORT_SYMBOL_GPL(clk_hw_get_flags);
bool clk_hw_is_prepared(const struct clk_hw *hw)
{
return clk_core_is_prepared(hw->core);
}
EXPORT_SYMBOL_GPL(clk_hw_is_prepared);
bool clk_hw_rate_is_protected(const struct clk_hw *hw)
{
return clk_core_rate_is_protected(hw->core);
}
EXPORT_SYMBOL_GPL(clk_hw_rate_is_protected);
bool clk_hw_is_enabled(const struct clk_hw *hw)
{
return clk_core_is_enabled(hw->core);
}
EXPORT_SYMBOL_GPL(clk_hw_is_enabled);
bool __clk_is_enabled(struct clk *clk)
{
if (!clk)
return false;
return clk_core_is_enabled(clk->core);
}
EXPORT_SYMBOL_GPL(__clk_is_enabled);
static bool mux_is_better_rate(unsigned long rate, unsigned long now,
unsigned long best, unsigned long flags)
{
if (flags & CLK_MUX_ROUND_CLOSEST)
return abs(now - rate) < abs(best - rate);
return now <= rate && now > best;
}
int clk_mux_determine_rate_flags(struct clk_hw *hw,
struct clk_rate_request *req,
unsigned long flags)
{
struct clk_core *core = hw->core, *parent, *best_parent = NULL;
int i, num_parents, ret;
unsigned long best = 0;
struct clk_rate_request parent_req = *req;
/* if NO_REPARENT flag set, pass through to current parent */
if (core->flags & CLK_SET_RATE_NO_REPARENT) {
parent = core->parent;
if (core->flags & CLK_SET_RATE_PARENT) {
ret = __clk_determine_rate(parent ? parent->hw : NULL,
&parent_req);
if (ret)
return ret;
best = parent_req.rate;
} else if (parent) {
best = clk_core_get_rate_nolock(parent);
} else {
best = clk_core_get_rate_nolock(core);
}
goto out;
}
/* find the parent that can provide the fastest rate <= rate */
num_parents = core->num_parents;
for (i = 0; i < num_parents; i++) {
parent = clk_core_get_parent_by_index(core, i);
if (!parent)
continue;
if (core->flags & CLK_SET_RATE_PARENT) {
parent_req = *req;
ret = __clk_determine_rate(parent->hw, &parent_req);
if (ret)
continue;
} else {
parent_req.rate = clk_core_get_rate_nolock(parent);
}
if (mux_is_better_rate(req->rate, parent_req.rate,
best, flags)) {
best_parent = parent;
best = parent_req.rate;
}
}
if (!best_parent)
return -EINVAL;
out:
if (best_parent)
req->best_parent_hw = best_parent->hw;
req->best_parent_rate = best;
req->rate = best;
return 0;
}
EXPORT_SYMBOL_GPL(clk_mux_determine_rate_flags);
struct clk *__clk_lookup(const char *name)
{
struct clk_core *core = clk_core_lookup(name);
return !core ? NULL : core->hw->clk;
}
static void clk_core_get_boundaries(struct clk_core *core,
unsigned long *min_rate,
unsigned long *max_rate)
{
struct clk *clk_user;
*min_rate = core->min_rate;
*max_rate = core->max_rate;
hlist_for_each_entry(clk_user, &core->clks, clks_node)
*min_rate = max(*min_rate, clk_user->min_rate);
hlist_for_each_entry(clk_user, &core->clks, clks_node)
*max_rate = min(*max_rate, clk_user->max_rate);
}
void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate,
unsigned long max_rate)
{
hw->core->min_rate = min_rate;
hw->core->max_rate = max_rate;
}
EXPORT_SYMBOL_GPL(clk_hw_set_rate_range);
/*
* __clk_mux_determine_rate - clk_ops::determine_rate implementation for a mux type clk
* @hw: mux type clk to determine rate on
* @req: rate request, also used to return preferred parent and frequencies
*
* Helper for finding best parent to provide a given frequency. This can be used
* directly as a determine_rate callback (e.g. for a mux), or from a more
* complex clock that may combine a mux with other operations.
*
* Returns: 0 on success, -EERROR value on error
*/
int __clk_mux_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
return clk_mux_determine_rate_flags(hw, req, 0);
}
EXPORT_SYMBOL_GPL(__clk_mux_determine_rate);
int __clk_mux_determine_rate_closest(struct clk_hw *hw,
struct clk_rate_request *req)
{
return clk_mux_determine_rate_flags(hw, req, CLK_MUX_ROUND_CLOSEST);
}
EXPORT_SYMBOL_GPL(__clk_mux_determine_rate_closest);
/*** clk api ***/
static void clk_core_rate_unprotect(struct clk_core *core)
{
lockdep_assert_held(&prepare_lock);
if (!core)
return;
if (WARN(core->protect_count == 0,
"%s already unprotected\n", core->name))
return;
if (--core->protect_count > 0)
return;
clk_core_rate_unprotect(core->parent);
}
static int clk_core_rate_nuke_protect(struct clk_core *core)
{
int ret;
lockdep_assert_held(&prepare_lock);
if (!core)
return -EINVAL;
if (core->protect_count == 0)
return 0;
ret = core->protect_count;
core->protect_count = 1;
clk_core_rate_unprotect(core);
return ret;
}
/**
* clk_rate_exclusive_put - release exclusivity over clock rate control
* @clk: the clk over which the exclusivity is released
*
* clk_rate_exclusive_put() completes a critical section during which a clock
* consumer cannot tolerate any other consumer making any operation on the
* clock which could result in a rate change or rate glitch. Exclusive clocks
* cannot have their rate changed, either directly or indirectly due to changes
* further up the parent chain of clocks. As a result, clocks up parent chain
* also get under exclusive control of the calling consumer.
*
* If exlusivity is claimed more than once on clock, even by the same consumer,
* the rate effectively gets locked as exclusivity can't be preempted.
*
* Calls to clk_rate_exclusive_put() must be balanced with calls to
* clk_rate_exclusive_get(). Calls to this function may sleep, and do not return
* error status.
*/
void clk_rate_exclusive_put(struct clk *clk)
{
if (!clk)
return;
clk_prepare_lock();
/*
* if there is something wrong with this consumer protect count, stop
* here before messing with the provider
*/
if (WARN_ON(clk->exclusive_count <= 0))
goto out;
clk_core_rate_unprotect(clk->core);
clk->exclusive_count--;
out:
clk_prepare_unlock();
}
EXPORT_SYMBOL_GPL(clk_rate_exclusive_put);
static void clk_core_rate_protect(struct clk_core *core)
{
lockdep_assert_held(&prepare_lock);
if (!core)
return;
if (core->protect_count == 0)
clk_core_rate_protect(core->parent);
core->protect_count++;
}
static void clk_core_rate_restore_protect(struct clk_core *core, int count)
{
lockdep_assert_held(&prepare_lock);
if (!core)
return;
if (count == 0)
return;
clk_core_rate_protect(core);
core->protect_count = count;
}
/**
* clk_rate_exclusive_get - get exclusivity over the clk rate control
* @clk: the clk over which the exclusity of rate control is requested
*
* clk_rate_exlusive_get() begins a critical section during which a clock
* consumer cannot tolerate any other consumer making any operation on the
* clock which could result in a rate change or rate glitch. Exclusive clocks
* cannot have their rate changed, either directly or indirectly due to changes
* further up the parent chain of clocks. As a result, clocks up parent chain
* also get under exclusive control of the calling consumer.
*
* If exlusivity is claimed more than once on clock, even by the same consumer,
* the rate effectively gets locked as exclusivity can't be preempted.
*
* Calls to clk_rate_exclusive_get() should be balanced with calls to
* clk_rate_exclusive_put(). Calls to this function may sleep.
* Returns 0 on success, -EERROR otherwise
*/
int clk_rate_exclusive_get(struct clk *clk)
{
if (!clk)
return 0;
clk_prepare_lock();
clk_core_rate_protect(clk->core);
clk->exclusive_count++;
clk_prepare_unlock();
return 0;
}
EXPORT_SYMBOL_GPL(clk_rate_exclusive_get);
static void clk_core_unprepare(struct clk_core *core)
{
lockdep_assert_held(&prepare_lock);
if (!core)
return;
if (WARN(core->prepare_count == 0,
"%s already unprepared\n", core->name))
return;
if (WARN(core->prepare_count == 1 && core->flags & CLK_IS_CRITICAL,
"Unpreparing critical %s\n", core->name))
return;
if (core->flags & CLK_SET_RATE_GATE)
clk_core_rate_unprotect(core);
if (--core->prepare_count > 0)
return;
WARN(core->enable_count > 0, "Unpreparing enabled %s\n", core->name);
trace_clk_unprepare(core);
if (core->ops->unprepare)
core->ops->unprepare(core->hw);
clk_pm_runtime_put(core);
trace_clk_unprepare_complete(core);
clk_core_unprepare(core->parent);
}
static void clk_core_unprepare_lock(struct clk_core *core)
{
clk_prepare_lock();
clk_core_unprepare(core);
clk_prepare_unlock();
}
/**
* clk_unprepare - undo preparation of a clock source
* @clk: the clk being unprepared
*
* clk_unprepare may sleep, which differentiates it from clk_disable. In a
* simple case, clk_unprepare can be used instead of clk_disable to gate a clk
* if the operation may sleep. One example is a clk which is accessed over
* I2c. In the complex case a clk gate operation may require a fast and a slow
* part. It is this reason that clk_unprepare and clk_disable are not mutually
* exclusive. In fact clk_disable must be called before clk_unprepare.
*/
void clk_unprepare(struct clk *clk)
{
if (IS_ERR_OR_NULL(clk))
return;
clk_core_unprepare_lock(clk->core);
}
EXPORT_SYMBOL_GPL(clk_unprepare);
static int clk_core_prepare(struct clk_core *core)
{
int ret = 0;
lockdep_assert_held(&prepare_lock);
if (!core)
return 0;
if (core->prepare_count == 0) {
ret = clk_pm_runtime_get(core);
if (ret)
return ret;
ret = clk_core_prepare(core->parent);
if (ret)
goto runtime_put;
trace_clk_prepare(core);
if (core->ops->prepare)
ret = core->ops->prepare(core->hw);
trace_clk_prepare_complete(core);
if (ret)
goto unprepare;
}
core->prepare_count++;
/*
* CLK_SET_RATE_GATE is a special case of clock protection
* Instead of a consumer claiming exclusive rate control, it is
* actually the provider which prevents any consumer from making any
* operation which could result in a rate change or rate glitch while
* the clock is prepared.
*/
if (core->flags & CLK_SET_RATE_GATE)
clk_core_rate_protect(core);
return 0;
unprepare:
clk_core_unprepare(core->parent);
runtime_put:
clk_pm_runtime_put(core);
return ret;
}
static int clk_core_prepare_lock(struct clk_core *core)
{
int ret;
clk_prepare_lock();
ret = clk_core_prepare(core);
clk_prepare_unlock();
return ret;
}
/**
* clk_prepare - prepare a clock source
* @clk: the clk being prepared
*
* clk_prepare may sleep, which differentiates it from clk_enable. In a simple
* case, clk_prepare can be used instead of clk_enable to ungate a clk if the
* operation may sleep. One example is a clk which is accessed over I2c. In
* the complex case a clk ungate operation may require a fast and a slow part.
* It is this reason that clk_prepare and clk_enable are not mutually
* exclusive. In fact clk_prepare must be called before clk_enable.
* Returns 0 on success, -EERROR otherwise.
*/
int clk_prepare(struct clk *clk)
{
if (!clk)
return 0;
return clk_core_prepare_lock(clk->core);
}
EXPORT_SYMBOL_GPL(clk_prepare);
static void clk_core_disable(struct clk_core *core)
{
lockdep_assert_held(&enable_lock);
if (!core)
return;
if (WARN(core->enable_count == 0, "%s already disabled\n", core->name))
return;
if (WARN(core->enable_count == 1 && core->flags & CLK_IS_CRITICAL,
"Disabling critical %s\n", core->name))
return;
if (--core->enable_count > 0)
return;
trace_clk_disable_rcuidle(core);
if (core->ops->disable)
core->ops->disable(core->hw);
trace_clk_disable_complete_rcuidle(core);
clk_core_disable(core->parent);
}
static void clk_core_disable_lock(struct clk_core *core)
{
unsigned long flags;
flags = clk_enable_lock();
clk_core_disable(core);
clk_enable_unlock(flags);
}
/**
* clk_disable - gate a clock
* @clk: the clk being gated
*
* clk_disable must not sleep, which differentiates it from clk_unprepare. In
* a simple case, clk_disable can be used instead of clk_unprepare to gate a
* clk if the operation is fast and will never sleep. One example is a
* SoC-internal clk which is controlled via simple register writes. In the
* complex case a clk gate operation may require a fast and a slow part. It is
* this reason that clk_unprepare and clk_disable are not mutually exclusive.
* In fact clk_disable must be called before clk_unprepare.
*/
void clk_disable(struct clk *clk)
{
if (IS_ERR_OR_NULL(clk))
return;
clk_core_disable_lock(clk->core);
}
EXPORT_SYMBOL_GPL(clk_disable);
static int clk_core_enable(struct clk_core *core)
{
int ret = 0;
lockdep_assert_held(&enable_lock);
if (!core)
return 0;
if (WARN(core->prepare_count == 0,
"Enabling unprepared %s\n", core->name))
return -ESHUTDOWN;
if (core->enable_count == 0) {
ret = clk_core_enable(core->parent);
if (ret)
return ret;
trace_clk_enable_rcuidle(core);
if (core->ops->enable)
ret = core->ops->enable(core->hw);
trace_clk_enable_complete_rcuidle(core);
if (ret) {
clk_core_disable(core->parent);
return ret;
}
}
core->enable_count++;
return 0;
}
static int clk_core_enable_lock(struct clk_core *core)
{
unsigned long flags;
int ret;
flags = clk_enable_lock();
ret = clk_core_enable(core);
clk_enable_unlock(flags);
return ret;
}
/**
* clk_gate_restore_context - restore context for poweroff
* @hw: the clk_hw pointer of clock whose state is to be restored
*
* The clock gate restore context function enables or disables
* the gate clocks based on the enable_count. This is done in cases
* where the clock context is lost and based on the enable_count
* the clock either needs to be enabled/disabled. This
* helps restore the state of gate clocks.
*/
void clk_gate_restore_context(struct clk_hw *hw)
{
struct clk_core *core = hw->core;
if (core->enable_count)
core->ops->enable(hw);
else
core->ops->disable(hw);
}
EXPORT_SYMBOL_GPL(clk_gate_restore_context);
static int clk_core_save_context(struct clk_core *core)
{
struct clk_core *child;
int ret = 0;
hlist_for_each_entry(child, &core->children, child_node) {
ret = clk_core_save_context(child);
if (ret < 0)
return ret;
}
if (core->ops && core->ops->save_context)
ret = core->ops->save_context(core->hw);
return ret;
}
static void clk_core_restore_context(struct clk_core *core)
{
struct clk_core *child;
if (core->ops && core->ops->restore_context)
core->ops->restore_context(core->hw);
hlist_for_each_entry(child, &core->children, child_node)
clk_core_restore_context(child);
}
/**
* clk_save_context - save clock context for poweroff
*
* Saves the context of the clock register for powerstates in which the
* contents of the registers will be lost. Occurs deep within the suspend
* code. Returns 0 on success.
*/
int clk_save_context(void)
{
struct clk_core *clk;
int ret;
hlist_for_each_entry(clk, &clk_root_list, child_node) {
ret = clk_core_save_context(clk);
if (ret < 0)
return ret;
}
hlist_for_each_entry(clk, &clk_orphan_list, child_node) {
ret = clk_core_save_context(clk);
if (ret < 0)
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(clk_save_context);
/**
* clk_restore_context - restore clock context after poweroff
*
* Restore the saved clock context upon resume.
*
*/
void clk_restore_context(void)
{
struct clk_core *core;
hlist_for_each_entry(core, &clk_root_list, child_node)
clk_core_restore_context(core);
hlist_for_each_entry(core, &clk_orphan_list, child_node)
clk_core_restore_context(core);
}
EXPORT_SYMBOL_GPL(clk_restore_context);
/**
* clk_enable - ungate a clock
* @clk: the clk being ungated
*
* clk_enable must not sleep, which differentiates it from clk_prepare. In a
* simple case, clk_enable can be used instead of clk_prepare to ungate a clk
* if the operation will never sleep. One example is a SoC-internal clk which
* is controlled via simple register writes. In the complex case a clk ungate
* operation may require a fast and a slow part. It is this reason that
* clk_enable and clk_prepare are not mutually exclusive. In fact clk_prepare
* must be called before clk_enable. Returns 0 on success, -EERROR
* otherwise.
*/
int clk_enable(struct clk *clk)
{
if (!clk)
return 0;
return clk_core_enable_lock(clk->core);
}
EXPORT_SYMBOL_GPL(clk_enable);
static int clk_core_prepare_enable(struct clk_core *core)
{
int ret;
ret = clk_core_prepare_lock(core);
if (ret)
return ret;
ret = clk_core_enable_lock(core);
if (ret)
clk_core_unprepare_lock(core);
return ret;
}
static void clk_core_disable_unprepare(struct clk_core *core)
{
clk_core_disable_lock(core);
clk_core_unprepare_lock(core);
}
static void clk_unprepare_unused_subtree(struct clk_core *core)
{
struct clk_core *child;
lockdep_assert_held(&prepare_lock);
hlist_for_each_entry(child, &core->children, child_node)
clk_unprepare_unused_subtree(child);
if (core->prepare_count)
return;
if (core->flags & CLK_IGNORE_UNUSED)
return;
if (clk_pm_runtime_get(core))
return;
if (clk_core_is_prepared(core)) {
trace_clk_unprepare(core);
if (core->ops->unprepare_unused)
core->ops->unprepare_unused(core->hw);
else if (core->ops->unprepare)
core->ops->unprepare(core->hw);
trace_clk_unprepare_complete(core);
}
clk_pm_runtime_put(core);
}
static void clk_disable_unused_subtree(struct clk_core *core)
{
struct clk_core *child;
unsigned long flags;
lockdep_assert_held(&prepare_lock);
hlist_for_each_entry(child, &core->children, child_node)
clk_disable_unused_subtree(child);
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_prepare_enable(core->parent);
if (clk_pm_runtime_get(core))
goto unprepare_out;
flags = clk_enable_lock();
if (core->enable_count)
goto unlock_out;
if (core->flags & CLK_IGNORE_UNUSED)
goto unlock_out;
/*
* some gate clocks have special needs during the disable-unused
* sequence. call .disable_unused if available, otherwise fall
* back to .disable
*/
if (clk_core_is_enabled(core)) {
trace_clk_disable(core);
if (core->ops->disable_unused)
core->ops->disable_unused(core->hw);
else if (core->ops->disable)
core->ops->disable(core->hw);
trace_clk_disable_complete(core);
}
unlock_out:
clk_enable_unlock(flags);
clk_pm_runtime_put(core);
unprepare_out:
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_disable_unprepare(core->parent);
}
static bool clk_ignore_unused;
static int __init clk_ignore_unused_setup(char *__unused)
{
clk_ignore_unused = true;
return 1;
}
__setup("clk_ignore_unused", clk_ignore_unused_setup);
static int clk_disable_unused(void)
{
struct clk_core *core;
if (clk_ignore_unused) {
pr_warn("clk: Not disabling unused clocks\n");
return 0;
}
clk_prepare_lock();
hlist_for_each_entry(core, &clk_root_list, child_node)
clk_disable_unused_subtree(core);
hlist_for_each_entry(core, &clk_orphan_list, child_node)
clk_disable_unused_subtree(core);
hlist_for_each_entry(core, &clk_root_list, child_node)
clk_unprepare_unused_subtree(core);
hlist_for_each_entry(core, &clk_orphan_list, child_node)
clk_unprepare_unused_subtree(core);
clk_prepare_unlock();
return 0;
}
late_initcall_sync(clk_disable_unused);
static int clk_core_determine_round_nolock(struct clk_core *core,
struct clk_rate_request *req)
{
long rate;
lockdep_assert_held(&prepare_lock);
if (!core)
return 0;
/*
* At this point, core protection will be disabled if
* - if the provider is not protected at all
* - if the calling consumer is the only one which has exclusivity
* over the provider
*/
if (clk_core_rate_is_protected(core)) {
req->rate = core->rate;
} else if (core->ops->determine_rate) {
return core->ops->determine_rate(core->hw, req);
} else if (core->ops->round_rate) {
rate = core->ops->round_rate(core->hw, req->rate,
&req->best_parent_rate);
if (rate < 0)
return rate;
req->rate = rate;
} else {
return -EINVAL;
}
return 0;
}
static void clk_core_init_rate_req(struct clk_core * const core,
struct clk_rate_request *req)
{
struct clk_core *parent;
if (WARN_ON(!core || !req))
return;
parent = core->parent;
if (parent) {
req->best_parent_hw = parent->hw;
req->best_parent_rate = parent->rate;
} else {
req->best_parent_hw = NULL;
req->best_parent_rate = 0;
}
}
static bool clk_core_can_round(struct clk_core * const core)
{
return core->ops->determine_rate || core->ops->round_rate;
}
static int clk_core_round_rate_nolock(struct clk_core *core,
struct clk_rate_request *req)
{
lockdep_assert_held(&prepare_lock);
if (!core) {
req->rate = 0;
return 0;
}
clk_core_init_rate_req(core, req);
if (clk_core_can_round(core))
return clk_core_determine_round_nolock(core, req);
else if (core->flags & CLK_SET_RATE_PARENT)
return clk_core_round_rate_nolock(core->parent, req);
req->rate = core->rate;
return 0;
}
/**
* __clk_determine_rate - get the closest rate actually supported by a clock
* @hw: determine the rate of this clock
* @req: target rate request
*
* Useful for clk_ops such as .set_rate and .determine_rate.
*/
int __clk_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
{
if (!hw) {
req->rate = 0;
return 0;
}
return clk_core_round_rate_nolock(hw->core, req);
}
EXPORT_SYMBOL_GPL(__clk_determine_rate);
unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate)
{
int ret;
struct clk_rate_request req;
clk_core_get_boundaries(hw->core, &req.min_rate, &req.max_rate);
req.rate = rate;
ret = clk_core_round_rate_nolock(hw->core, &req);
if (ret)
return 0;
return req.rate;
}
EXPORT_SYMBOL_GPL(clk_hw_round_rate);
/**
* clk_round_rate - round the given rate for a clk
* @clk: the clk for which we are rounding a rate
* @rate: the rate which is to be rounded
*
* Takes in a rate as input and rounds it to a rate that the clk can actually
* use which is then returned. If clk doesn't support round_rate operation
* then the parent rate is returned.
*/
long clk_round_rate(struct clk *clk, unsigned long rate)
{
struct clk_rate_request req;
int ret;
if (!clk)
return 0;
clk_prepare_lock();
if (clk->exclusive_count)
clk_core_rate_unprotect(clk->core);
clk_core_get_boundaries(clk->core, &req.min_rate, &req.max_rate);
req.rate = rate;
ret = clk_core_round_rate_nolock(clk->core, &req);
if (clk->exclusive_count)
clk_core_rate_protect(clk->core);
clk_prepare_unlock();
if (ret)
return ret;
return req.rate;
}
EXPORT_SYMBOL_GPL(clk_round_rate);
/**
* __clk_notify - call clk notifier chain
* @core: clk that is changing rate
* @msg: clk notifier type (see include/linux/clk.h)
* @old_rate: old clk rate
* @new_rate: new clk rate
*
* Triggers a notifier call chain on the clk rate-change notification
* for 'clk'. Passes a pointer to the struct clk and the previous
* and current rates to the notifier callback. Intended to be called by
* internal clock code only. Returns NOTIFY_DONE from the last driver
* called if all went well, or NOTIFY_STOP or NOTIFY_BAD immediately if
* a driver returns that.
*/
static int __clk_notify(struct clk_core *core, unsigned long msg,
unsigned long old_rate, unsigned long new_rate)
{
struct clk_notifier *cn;
struct clk_notifier_data cnd;
int ret = NOTIFY_DONE;
cnd.old_rate = old_rate;
cnd.new_rate = new_rate;
list_for_each_entry(cn, &clk_notifier_list, node) {
if (cn->clk->core == core) {
cnd.clk = cn->clk;
ret = srcu_notifier_call_chain(&cn->notifier_head, msg,
&cnd);
if (ret & NOTIFY_STOP_MASK)
return ret;
}
}
return ret;
}
/**
* __clk_recalc_accuracies
* @core: first clk in the subtree
*
* Walks the subtree of clks starting with clk and recalculates accuracies as
* it goes. Note that if a clk does not implement the .recalc_accuracy
* callback then it is assumed that the clock will take on the accuracy of its
* parent.
*/
static void __clk_recalc_accuracies(struct clk_core *core)
{
unsigned long parent_accuracy = 0;
struct clk_core *child;
lockdep_assert_held(&prepare_lock);
if (core->parent)
parent_accuracy = core->parent->accuracy;
if (core->ops->recalc_accuracy)
core->accuracy = core->ops->recalc_accuracy(core->hw,
parent_accuracy);
else
core->accuracy = parent_accuracy;
hlist_for_each_entry(child, &core->children, child_node)
__clk_recalc_accuracies(child);
}
static long clk_core_get_accuracy(struct clk_core *core)
{
unsigned long accuracy;
clk_prepare_lock();
if (core && (core->flags & CLK_GET_ACCURACY_NOCACHE))
__clk_recalc_accuracies(core);
accuracy = __clk_get_accuracy(core);
clk_prepare_unlock();
return accuracy;
}
/**
* clk_get_accuracy - return the accuracy of clk
* @clk: the clk whose accuracy is being returned
*
* Simply returns the cached accuracy of the clk, unless
* CLK_GET_ACCURACY_NOCACHE flag is set, which means a recalc_rate will be
* issued.
* If clk is NULL then returns 0.
*/
long clk_get_accuracy(struct clk *clk)
{
if (!clk)
return 0;
return clk_core_get_accuracy(clk->core);
}
EXPORT_SYMBOL_GPL(clk_get_accuracy);
static unsigned long clk_recalc(struct clk_core *core,
unsigned long parent_rate)
{
unsigned long rate = parent_rate;
if (core->ops->recalc_rate && !clk_pm_runtime_get(core)) {
rate = core->ops->recalc_rate(core->hw, parent_rate);
clk_pm_runtime_put(core);
}
return rate;
}
/**
* __clk_recalc_rates
* @core: first clk in the subtree
* @msg: notification type (see include/linux/clk.h)
*
* Walks the subtree of clks starting with clk and recalculates rates as it
* goes. Note that if a clk does not implement the .recalc_rate callback then
* it is assumed that the clock will take on the rate of its parent.
*
* clk_recalc_rates also propagates the POST_RATE_CHANGE notification,
* if necessary.
*/
static void __clk_recalc_rates(struct clk_core *core, unsigned long msg)
{
unsigned long old_rate;
unsigned long parent_rate = 0;
struct clk_core *child;
lockdep_assert_held(&prepare_lock);
old_rate = core->rate;
if (core->parent)
parent_rate = core->parent->rate;
core->rate = clk_recalc(core, parent_rate);
/*
* ignore NOTIFY_STOP and NOTIFY_BAD return values for POST_RATE_CHANGE
* & ABORT_RATE_CHANGE notifiers
*/
if (core->notifier_count && msg)
__clk_notify(core, msg, old_rate, core->rate);
hlist_for_each_entry(child, &core->children, child_node)
__clk_recalc_rates(child, msg);
}
static unsigned long clk_core_get_rate(struct clk_core *core)
{
unsigned long rate;
clk_prepare_lock();
if (core && (core->flags & CLK_GET_RATE_NOCACHE))
__clk_recalc_rates(core, 0);
rate = clk_core_get_rate_nolock(core);
clk_prepare_unlock();
return rate;
}
/**
* clk_get_rate - return the rate of clk
* @clk: the clk whose rate is being returned
*
* Simply returns the cached rate of the clk, unless CLK_GET_RATE_NOCACHE flag
* is set, which means a recalc_rate will be issued.
* If clk is NULL then returns 0.
*/
unsigned long clk_get_rate(struct clk *clk)
{
if (!clk)
return 0;
return clk_core_get_rate(clk->core);
}
EXPORT_SYMBOL_GPL(clk_get_rate);
static int clk_fetch_parent_index(struct clk_core *core,
struct clk_core *parent)
{
int i;
if (!parent)
return -EINVAL;
for (i = 0; i < core->num_parents; i++) {
/* Found it first try! */
if (core->parents[i].core == parent)
return i;
/* Something else is here, so keep looking */
if (core->parents[i].core)
continue;
/* Maybe core hasn't been cached but the hw is all we know? */
if (core->parents[i].hw) {
if (core->parents[i].hw == parent->hw)
break;
/* Didn't match, but we're expecting a clk_hw */
continue;
}
/* Maybe it hasn't been cached (clk_set_parent() path) */
if (parent == clk_core_get(core, i))
break;
/* Fallback to comparing globally unique names */
if (!strcmp(parent->name, core->parents[i].name))
break;
}
if (i == core->num_parents)
return -EINVAL;
core->parents[i].core = parent;
return i;
}
/*
* Update the orphan status of @core and all its children.
*/
static void clk_core_update_orphan_status(struct clk_core *core, bool is_orphan)
{
struct clk_core *child;
core->orphan = is_orphan;
hlist_for_each_entry(child, &core->children, child_node)
clk_core_update_orphan_status(child, is_orphan);
}
static void clk_reparent(struct clk_core *core, struct clk_core *new_parent)
{
bool was_orphan = core->orphan;
hlist_del(&core->child_node);
if (new_parent) {
bool becomes_orphan = new_parent->orphan;
/* avoid duplicate POST_RATE_CHANGE notifications */
if (new_parent->new_child == core)
new_parent->new_child = NULL;
hlist_add_head(&core->child_node, &new_parent->children);
if (was_orphan != becomes_orphan)
clk_core_update_orphan_status(core, becomes_orphan);
} else {
hlist_add_head(&core->child_node, &clk_orphan_list);
if (!was_orphan)
clk_core_update_orphan_status(core, true);
}
core->parent = new_parent;
}
static struct clk_core *__clk_set_parent_before(struct clk_core *core,
struct clk_core *parent)
{
unsigned long flags;
struct clk_core *old_parent = core->parent;
/*
* 1. enable parents for CLK_OPS_PARENT_ENABLE clock
*
* 2. Migrate prepare state between parents and prevent race with
* clk_enable().
*
* If the clock is not prepared, then a race with
* clk_enable/disable() is impossible since we already have the
* prepare lock (future calls to clk_enable() need to be preceded by
* a clk_prepare()).
*
* If the clock is prepared, migrate the prepared state to the new
* parent and also protect against a race with clk_enable() by
* forcing the clock and the new parent on. This ensures that all
* future calls to clk_enable() are practically NOPs with respect to
* hardware and software states.
*
* See also: Comment for clk_set_parent() below.
*/
/* enable old_parent & parent if CLK_OPS_PARENT_ENABLE is set */
if (core->flags & CLK_OPS_PARENT_ENABLE) {
clk_core_prepare_enable(old_parent);
clk_core_prepare_enable(parent);
}
/* migrate prepare count if > 0 */
if (core->prepare_count) {
clk_core_prepare_enable(parent);
clk_core_enable_lock(core);
}
/* update the clk tree topology */
flags = clk_enable_lock();
clk_reparent(core, parent);
clk_enable_unlock(flags);
return old_parent;
}
static void __clk_set_parent_after(struct clk_core *core,
struct clk_core *parent,
struct clk_core *old_parent)
{
/*
* Finish the migration of prepare state and undo the changes done
* for preventing a race with clk_enable().
*/
if (core->prepare_count) {
clk_core_disable_lock(core);
clk_core_disable_unprepare(old_parent);
}
/* re-balance ref counting if CLK_OPS_PARENT_ENABLE is set */
if (core->flags & CLK_OPS_PARENT_ENABLE) {
clk_core_disable_unprepare(parent);
clk_core_disable_unprepare(old_parent);
}
}
static int __clk_set_parent(struct clk_core *core, struct clk_core *parent,
u8 p_index)
{
unsigned long flags;
int ret = 0;
struct clk_core *old_parent;
old_parent = __clk_set_parent_before(core, parent);
trace_clk_set_parent(core, parent);
/* change clock input source */
if (parent && core->ops->set_parent)
ret = core->ops->set_parent(core->hw, p_index);
trace_clk_set_parent_complete(core, parent);
if (ret) {
flags = clk_enable_lock();
clk_reparent(core, old_parent);
clk_enable_unlock(flags);
__clk_set_parent_after(core, old_parent, parent);
return ret;
}
__clk_set_parent_after(core, parent, old_parent);
return 0;
}
/**
* __clk_speculate_rates
* @core: first clk in the subtree
* @parent_rate: the "future" rate of clk's parent
*
* Walks the subtree of clks starting with clk, speculating rates as it
* goes and firing off PRE_RATE_CHANGE notifications as necessary.
*
* Unlike clk_recalc_rates, clk_speculate_rates exists only for sending
* pre-rate change notifications and returns early if no clks in the
* subtree have subscribed to the notifications. Note that if a clk does not
* implement the .recalc_rate callback then it is assumed that the clock will
* take on the rate of its parent.
*/
static int __clk_speculate_rates(struct clk_core *core,
unsigned long parent_rate)
{
struct clk_core *child;
unsigned long new_rate;
int ret = NOTIFY_DONE;
lockdep_assert_held(&prepare_lock);
new_rate = clk_recalc(core, parent_rate);
/* abort rate change if a driver returns NOTIFY_BAD or NOTIFY_STOP */
if (core->notifier_count)
ret = __clk_notify(core, PRE_RATE_CHANGE, core->rate, new_rate);
if (ret & NOTIFY_STOP_MASK) {
pr_debug("%s: clk notifier callback for clock %s aborted with error %d\n",
__func__, core->name, ret);
goto out;
}
hlist_for_each_entry(child, &core->children, child_node) {
ret = __clk_speculate_rates(child, new_rate);
if (ret & NOTIFY_STOP_MASK)
break;
}
out:
return ret;
}
static void clk_calc_subtree(struct clk_core *core, unsigned long new_rate,
struct clk_core *new_parent, u8 p_index)
{
struct clk_core *child;
core->new_rate = new_rate;
core->new_parent = new_parent;
core->new_parent_index = p_index;
/* include clk in new parent's PRE_RATE_CHANGE notifications */
core->new_child = NULL;
if (new_parent && new_parent != core->parent)
new_parent->new_child = core;
hlist_for_each_entry(child, &core->children, child_node) {
child->new_rate = clk_recalc(child, new_rate);
clk_calc_subtree(child, child->new_rate, NULL, 0);
}
}
/*
* calculate the new rates returning the topmost clock that has to be
* changed.
*/
static struct clk_core *clk_calc_new_rates(struct clk_core *core,
unsigned long rate)
{
struct clk_core *top = core;
struct clk_core *old_parent, *parent;
unsigned long best_parent_rate = 0;
unsigned long new_rate;
unsigned long min_rate;
unsigned long max_rate;
int p_index = 0;
long ret;
/* sanity */
if (IS_ERR_OR_NULL(core))
return NULL;
/* save parent rate, if it exists */
parent = old_parent = core->parent;
if (parent)
best_parent_rate = parent->rate;
clk_core_get_boundaries(core, &min_rate, &max_rate);
/* find the closest rate and parent clk/rate */
if (clk_core_can_round(core)) {
struct clk_rate_request req;
req.rate = rate;
req.min_rate = min_rate;
req.max_rate = max_rate;
clk_core_init_rate_req(core, &req);
ret = clk_core_determine_round_nolock(core, &req);
if (ret < 0)
return NULL;
best_parent_rate = req.best_parent_rate;
new_rate = req.rate;
parent = req.best_parent_hw ? req.best_parent_hw->core : NULL;
if (new_rate < min_rate || new_rate > max_rate)
return NULL;
} else if (!parent || !(core->flags & CLK_SET_RATE_PARENT)) {
/* pass-through clock without adjustable parent */
core->new_rate = core->rate;
return NULL;
} else {
/* pass-through clock with adjustable parent */
top = clk_calc_new_rates(parent, rate);
new_rate = parent->new_rate;
goto out;
}
/* some clocks must be gated to change parent */
if (parent != old_parent &&
(core->flags & CLK_SET_PARENT_GATE) && core->prepare_count) {
pr_debug("%s: %s not gated but wants to reparent\n",
__func__, core->name);
return NULL;
}
/* try finding the new parent index */
if (parent && core->num_parents > 1) {
p_index = clk_fetch_parent_index(core, parent);
if (p_index < 0) {
pr_debug("%s: clk %s can not be parent of clk %s\n",
__func__, parent->name, core->name);
return NULL;
}
}
if ((core->flags & CLK_SET_RATE_PARENT) && parent &&
best_parent_rate != parent->rate)
top = clk_calc_new_rates(parent, best_parent_rate);
out:
clk_calc_subtree(core, new_rate, parent, p_index);
return top;
}
/*
* Notify about rate changes in a subtree. Always walk down the whole tree
* so that in case of an error we can walk down the whole tree again and
* abort the change.
*/
static struct clk_core *clk_propagate_rate_change(struct clk_core *core,
unsigned long event)
{
struct clk_core *child, *tmp_clk, *fail_clk = NULL;
int ret = NOTIFY_DONE;
if (core->rate == core->new_rate)
return NULL;
if (core->notifier_count) {
ret = __clk_notify(core, event, core->rate, core->new_rate);
if (ret & NOTIFY_STOP_MASK)
fail_clk = core;
}
hlist_for_each_entry(child, &core->children, child_node) {
/* Skip children who will be reparented to another clock */
if (child->new_parent && child->new_parent != core)
continue;
tmp_clk = clk_propagate_rate_change(child, event);
if (tmp_clk)
fail_clk = tmp_clk;
}
/* handle the new child who might not be in core->children yet */
if (core->new_child) {
tmp_clk = clk_propagate_rate_change(core->new_child, event);
if (tmp_clk)
fail_clk = tmp_clk;
}
return fail_clk;
}
/*
* walk down a subtree and set the new rates notifying the rate
* change on the way
*/
static void clk_change_rate(struct clk_core *core)
{
struct clk_core *child;
struct hlist_node *tmp;
unsigned long old_rate;
unsigned long best_parent_rate = 0;
bool skip_set_rate = false;
struct clk_core *old_parent;
struct clk_core *parent = NULL;
old_rate = core->rate;
if (core->new_parent) {
parent = core->new_parent;
best_parent_rate = core->new_parent->rate;
} else if (core->parent) {
parent = core->parent;
best_parent_rate = core->parent->rate;
}
if (clk_pm_runtime_get(core))
return;
if (core->flags & CLK_SET_RATE_UNGATE) {
unsigned long flags;
clk_core_prepare(core);
flags = clk_enable_lock();
clk_core_enable(core);
clk_enable_unlock(flags);
}
if (core->new_parent && core->new_parent != core->parent) {
old_parent = __clk_set_parent_before(core, core->new_parent);
trace_clk_set_parent(core, core->new_parent);
if (core->ops->set_rate_and_parent) {
skip_set_rate = true;
core->ops->set_rate_and_parent(core->hw, core->new_rate,
best_parent_rate,
core->new_parent_index);
} else if (core->ops->set_parent) {
core->ops->set_parent(core->hw, core->new_parent_index);
}
trace_clk_set_parent_complete(core, core->new_parent);
__clk_set_parent_after(core, core->new_parent, old_parent);
}
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_prepare_enable(parent);
trace_clk_set_rate(core, core->new_rate);
if (!skip_set_rate && core->ops->set_rate)
core->ops->set_rate(core->hw, core->new_rate, best_parent_rate);
trace_clk_set_rate_complete(core, core->new_rate);
core->rate = clk_recalc(core, best_parent_rate);
if (core->flags & CLK_SET_RATE_UNGATE) {
unsigned long flags;
flags = clk_enable_lock();
clk_core_disable(core);
clk_enable_unlock(flags);
clk_core_unprepare(core);
}
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_disable_unprepare(parent);
if (core->notifier_count && old_rate != core->rate)
__clk_notify(core, POST_RATE_CHANGE, old_rate, core->rate);
if (core->flags & CLK_RECALC_NEW_RATES)
(void)clk_calc_new_rates(core, core->new_rate);
/*
* Use safe iteration, as change_rate can actually swap parents
* for certain clock types.
*/
hlist_for_each_entry_safe(child, tmp, &core->children, child_node) {
/* Skip children who will be reparented to another clock */
if (child->new_parent && child->new_parent != core)
continue;
clk_change_rate(child);
}
/* handle the new child who might not be in core->children yet */
if (core->new_child)
clk_change_rate(core->new_child);
clk_pm_runtime_put(core);
}
static unsigned long clk_core_req_round_rate_nolock(struct clk_core *core,
unsigned long req_rate)
{
int ret, cnt;
struct clk_rate_request req;
lockdep_assert_held(&prepare_lock);
if (!core)
return 0;
/* simulate what the rate would be if it could be freely set */
cnt = clk_core_rate_nuke_protect(core);
if (cnt < 0)
return cnt;
clk_core_get_boundaries(core, &req.min_rate, &req.max_rate);
req.rate = req_rate;
ret = clk_core_round_rate_nolock(core, &req);
/* restore the protection */
clk_core_rate_restore_protect(core, cnt);
return ret ? 0 : req.rate;
}
static int clk_core_set_rate_nolock(struct clk_core *core,
unsigned long req_rate)
{
struct clk_core *top, *fail_clk;
unsigned long rate;
int ret = 0;
if (!core)
return 0;
rate = clk_core_req_round_rate_nolock(core, req_rate);
/* bail early if nothing to do */
if (rate == clk_core_get_rate_nolock(core))
return 0;
/* fail on a direct rate set of a protected provider */
if (clk_core_rate_is_protected(core))
return -EBUSY;
/* calculate new rates and get the topmost changed clock */
top = clk_calc_new_rates(core, req_rate);
if (!top)
return -EINVAL;
ret = clk_pm_runtime_get(core);
if (ret)
return ret;
/* notify that we are about to change rates */
fail_clk = clk_propagate_rate_change(top, PRE_RATE_CHANGE);
if (fail_clk) {
pr_debug("%s: failed to set %s rate\n", __func__,
fail_clk->name);
clk_propagate_rate_change(top, ABORT_RATE_CHANGE);
ret = -EBUSY;
goto err;
}
/* change the rates */
clk_change_rate(top);
core->req_rate = req_rate;
err:
clk_pm_runtime_put(core);
return ret;
}
/**
* clk_set_rate - specify a new rate for clk
* @clk: the clk whose rate is being changed
* @rate: the new rate for clk
*
* In the simplest case clk_set_rate will only adjust the rate of clk.
*
* Setting the CLK_SET_RATE_PARENT flag allows the rate change operation to
* propagate up to clk's parent; whether or not this happens depends on the
* outcome of clk's .round_rate implementation. If *parent_rate is unchanged
* after calling .round_rate then upstream parent propagation is ignored. If
* *parent_rate comes back with a new rate for clk's parent then we propagate
* up to clk's parent and set its rate. Upward propagation will continue
* until either a clk does not support the CLK_SET_RATE_PARENT flag or
* .round_rate stops requesting changes to clk's parent_rate.
*
* Rate changes are accomplished via tree traversal that also recalculates the
* rates for the clocks and fires off POST_RATE_CHANGE notifiers.
*
* Returns 0 on success, -EERROR otherwise.
*/
int clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret;
if (!clk)
return 0;
/* prevent racing with updates to the clock topology */
clk_prepare_lock();
if (clk->exclusive_count)
clk_core_rate_unprotect(clk->core);
ret = clk_core_set_rate_nolock(clk->core, rate);
if (clk->exclusive_count)
clk_core_rate_protect(clk->core);
clk_prepare_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(clk_set_rate);
/**
* clk_set_rate_exclusive - specify a new rate and get exclusive control
* @clk: the clk whose rate is being changed
* @rate: the new rate for clk
*
* This is a combination of clk_set_rate() and clk_rate_exclusive_get()
* within a critical section
*
* This can be used initially to ensure that at least 1 consumer is
* satisfied when several consumers are competing for exclusivity over the
* same clock provider.
*
* The exclusivity is not applied if setting the rate failed.
*
* Calls to clk_rate_exclusive_get() should be balanced with calls to
* clk_rate_exclusive_put().
*
* Returns 0 on success, -EERROR otherwise.
*/
int clk_set_rate_exclusive(struct clk *clk, unsigned long rate)
{
int ret;
if (!clk)
return 0;
/* prevent racing with updates to the clock topology */
clk_prepare_lock();
/*
* The temporary protection removal is not here, on purpose
* This function is meant to be used instead of clk_rate_protect,
* so before the consumer code path protect the clock provider
*/
ret = clk_core_set_rate_nolock(clk->core, rate);
if (!ret) {
clk_core_rate_protect(clk->core);
clk->exclusive_count++;
}
clk_prepare_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(clk_set_rate_exclusive);
/**
* clk_set_rate_range - set a rate range for a clock source
* @clk: clock source
* @min: desired minimum clock rate in Hz, inclusive
* @max: desired maximum clock rate in Hz, inclusive
*
* Returns success (0) or negative errno.
*/
int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max)
{
int ret = 0;
unsigned long old_min, old_max, rate;
if (!clk)
return 0;
if (min > max) {
pr_err("%s: clk %s dev %s con %s: invalid range [%lu, %lu]\n",
__func__, clk->core->name, clk->dev_id, clk->con_id,
min, max);
return -EINVAL;
}
clk_prepare_lock();
if (clk->exclusive_count)
clk_core_rate_unprotect(clk->core);
/* Save the current values in case we need to rollback the change */
old_min = clk->min_rate;
old_max = clk->max_rate;
clk->min_rate = min;
clk->max_rate = max;
rate = clk_core_get_rate_nolock(clk->core);
if (rate < min || rate > max) {
/*
* FIXME:
* We are in bit of trouble here, current rate is outside the
* the requested range. We are going try to request appropriate
* range boundary but there is a catch. It may fail for the
* usual reason (clock broken, clock protected, etc) but also
* because:
* - round_rate() was not favorable and fell on the wrong
* side of the boundary
* - the determine_rate() callback does not really check for
* this corner case when determining the rate
*/
if (rate < min)
rate = min;
else
rate = max;
ret = clk_core_set_rate_nolock(clk->core, rate);
if (ret) {
/* rollback the changes */
clk->min_rate = old_min;
clk->max_rate = old_max;
}
}
if (clk->exclusive_count)
clk_core_rate_protect(clk->core);
clk_prepare_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(clk_set_rate_range);
/**
* clk_set_min_rate - set a minimum clock rate for a clock source
* @clk: clock source
* @rate: desired minimum clock rate in Hz, inclusive
*
* Returns success (0) or negative errno.
*/
int clk_set_min_rate(struct clk *clk, unsigned long rate)
{
if (!clk)
return 0;
return clk_set_rate_range(clk, rate, clk->max_rate);
}
EXPORT_SYMBOL_GPL(clk_set_min_rate);
/**
* clk_set_max_rate - set a maximum clock rate for a clock source
* @clk: clock source
* @rate: desired maximum clock rate in Hz, inclusive
*
* Returns success (0) or negative errno.
*/
int clk_set_max_rate(struct clk *clk, unsigned long rate)
{
if (!clk)
return 0;
return clk_set_rate_range(clk, clk->min_rate, rate);
}
EXPORT_SYMBOL_GPL(clk_set_max_rate);
/**
* clk_get_parent - return the parent of a clk
* @clk: the clk whose parent gets returned
*
* Simply returns clk->parent. Returns NULL if clk is NULL.
*/
struct clk *clk_get_parent(struct clk *clk)
{
struct clk *parent;
if (!clk)
return NULL;
clk_prepare_lock();
/* TODO: Create a per-user clk and change callers to call clk_put */
parent = !clk->core->parent ? NULL : clk->core->parent->hw->clk;
clk_prepare_unlock();
return parent;
}
EXPORT_SYMBOL_GPL(clk_get_parent);
static struct clk_core *__clk_init_parent(struct clk_core *core)
{
u8 index = 0;
if (core->num_parents > 1 && core->ops->get_parent)
index = core->ops->get_parent(core->hw);
return clk_core_get_parent_by_index(core, index);
}
static void clk_core_reparent(struct clk_core *core,
struct clk_core *new_parent)
{
clk_reparent(core, new_parent);
__clk_recalc_accuracies(core);
__clk_recalc_rates(core, POST_RATE_CHANGE);
}
void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent)
{
if (!hw)
return;
clk_core_reparent(hw->core, !new_parent ? NULL : new_parent->core);
}
/**
* clk_has_parent - check if a clock is a possible parent for another
* @clk: clock source
* @parent: parent clock source
*
* This function can be used in drivers that need to check that a clock can be
* the parent of another without actually changing the parent.
*
* Returns true if @parent is a possible parent for @clk, false otherwise.
*/
bool clk_has_parent(struct clk *clk, struct clk *parent)
{
struct clk_core *core, *parent_core;
int i;
/* NULL clocks should be nops, so return success if either is NULL. */
if (!clk || !parent)
return true;
core = clk->core;
parent_core = parent->core;
/* Optimize for the case where the parent is already the parent. */
if (core->parent == parent_core)
return true;
for (i = 0; i < core->num_parents; i++)
if (!strcmp(core->parents[i].name, parent_core->name))
return true;
return false;
}
EXPORT_SYMBOL_GPL(clk_has_parent);
static int clk_core_set_parent_nolock(struct clk_core *core,
struct clk_core *parent)
{
int ret = 0;
int p_index = 0;
unsigned long p_rate = 0;
lockdep_assert_held(&prepare_lock);
if (!core)
return 0;
if (core->parent == parent)
return 0;
/* verify ops for for multi-parent clks */
if (core->num_parents > 1 && !core->ops->set_parent)
return -EPERM;
/* check that we are allowed to re-parent if the clock is in use */
if ((core->flags & CLK_SET_PARENT_GATE) && core->prepare_count)
return -EBUSY;
if (clk_core_rate_is_protected(core))
return -EBUSY;
/* try finding the new parent index */
if (parent) {
p_index = clk_fetch_parent_index(core, parent);
if (p_index < 0) {
pr_debug("%s: clk %s can not be parent of clk %s\n",
__func__, parent->name, core->name);
return p_index;
}
p_rate = parent->rate;
}
ret = clk_pm_runtime_get(core);
if (ret)
return ret;
/* propagate PRE_RATE_CHANGE notifications */
ret = __clk_speculate_rates(core, p_rate);
/* abort if a driver objects */
if (ret & NOTIFY_STOP_MASK)
goto runtime_put;
/* do the re-parent */
ret = __clk_set_parent(core, parent, p_index);
/* propagate rate an accuracy recalculation accordingly */
if (ret) {
__clk_recalc_rates(core, ABORT_RATE_CHANGE);
} else {
__clk_recalc_rates(core, POST_RATE_CHANGE);
__clk_recalc_accuracies(core);
}
runtime_put:
clk_pm_runtime_put(core);
return ret;
}
/**
* clk_set_parent - switch the parent of a mux clk
* @clk: the mux clk whose input we are switching
* @parent: the new input to clk
*
* Re-parent clk to use parent as its new input source. If clk is in
* prepared state, the clk will get enabled for the duration of this call. If
* that's not acceptable for a specific clk (Eg: the consumer can't handle
* that, the reparenting is glitchy in hardware, etc), use the
* CLK_SET_PARENT_GATE flag to allow reparenting only when clk is unprepared.
*
* After successfully changing clk's parent clk_set_parent will update the
* clk topology, sysfs topology and propagate rate recalculation via
* __clk_recalc_rates.
*
* Returns 0 on success, -EERROR otherwise.
*/
int clk_set_parent(struct clk *clk, struct clk *parent)
{
int ret;
if (!clk)
return 0;
clk_prepare_lock();
if (clk->exclusive_count)
clk_core_rate_unprotect(clk->core);
ret = clk_core_set_parent_nolock(clk->core,
parent ? parent->core : NULL);
if (clk->exclusive_count)
clk_core_rate_protect(clk->core);
clk_prepare_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(clk_set_parent);
static int clk_core_set_phase_nolock(struct clk_core *core, int degrees)
{
int ret = -EINVAL;
lockdep_assert_held(&prepare_lock);
if (!core)
return 0;
if (clk_core_rate_is_protected(core))
return -EBUSY;
trace_clk_set_phase(core, degrees);
if (core->ops->set_phase) {
ret = core->ops->set_phase(core->hw, degrees);
if (!ret)
core->phase = degrees;
}
trace_clk_set_phase_complete(core, degrees);
return ret;
}
/**
* clk_set_phase - adjust the phase shift of a clock signal
* @clk: clock signal source
* @degrees: number of degrees the signal is shifted
*
* Shifts the phase of a clock signal by the specified
* degrees. Returns 0 on success, -EERROR otherwise.
*
* This function makes no distinction about the input or reference
* signal that we adjust the clock signal phase against. For example
* phase locked-loop clock signal generators we may shift phase with
* respect to feedback clock signal input, but for other cases the
* clock phase may be shifted with respect to some other, unspecified
* signal.
*
* Additionally the concept of phase shift does not propagate through
* the clock tree hierarchy, which sets it apart from clock rates and
* clock accuracy. A parent clock phase attribute does not have an
* impact on the phase attribute of a child clock.
*/
int clk_set_phase(struct clk *clk, int degrees)
{
int ret;
if (!clk)
return 0;
/* sanity check degrees */
degrees %= 360;
if (degrees < 0)
degrees += 360;
clk_prepare_lock();
if (clk->exclusive_count)
clk_core_rate_unprotect(clk->core);
ret = clk_core_set_phase_nolock(clk->core, degrees);
if (clk->exclusive_count)
clk_core_rate_protect(clk->core);
clk_prepare_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(clk_set_phase);
static int clk_core_get_phase(struct clk_core *core)
{
int ret;
clk_prepare_lock();
/* Always try to update cached phase if possible */
if (core->ops->get_phase)
core->phase = core->ops->get_phase(core->hw);
ret = core->phase;
clk_prepare_unlock();
return ret;
}
/**
* clk_get_phase - return the phase shift of a clock signal
* @clk: clock signal source
*
* Returns the phase shift of a clock node in degrees, otherwise returns
* -EERROR.
*/
int clk_get_phase(struct clk *clk)
{
if (!clk)
return 0;
return clk_core_get_phase(clk->core);
}
EXPORT_SYMBOL_GPL(clk_get_phase);
static void clk_core_reset_duty_cycle_nolock(struct clk_core *core)
{
/* Assume a default value of 50% */
core->duty.num = 1;
core->duty.den = 2;
}
static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core);
static int clk_core_update_duty_cycle_nolock(struct clk_core *core)
{
struct clk_duty *duty = &core->duty;
int ret = 0;
if (!core->ops->get_duty_cycle)
return clk_core_update_duty_cycle_parent_nolock(core);
ret = core->ops->get_duty_cycle(core->hw, duty);
if (ret)
goto reset;
/* Don't trust the clock provider too much */
if (duty->den == 0 || duty->num > duty->den) {
ret = -EINVAL;
goto reset;
}
return 0;
reset:
clk_core_reset_duty_cycle_nolock(core);
return ret;
}
static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core)
{
int ret = 0;
if (core->parent &&
core->flags & CLK_DUTY_CYCLE_PARENT) {
ret = clk_core_update_duty_cycle_nolock(core->parent);
memcpy(&core->duty, &core->parent->duty, sizeof(core->duty));
} else {
clk_core_reset_duty_cycle_nolock(core);
}
return ret;
}
static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core,
struct clk_duty *duty);
static int clk_core_set_duty_cycle_nolock(struct clk_core *core,
struct clk_duty *duty)
{
int ret;
lockdep_assert_held(&prepare_lock);
if (clk_core_rate_is_protected(core))
return -EBUSY;
trace_clk_set_duty_cycle(core, duty);
if (!core->ops->set_duty_cycle)
return clk_core_set_duty_cycle_parent_nolock(core, duty);
ret = core->ops->set_duty_cycle(core->hw, duty);
if (!ret)
memcpy(&core->duty, duty, sizeof(*duty));
trace_clk_set_duty_cycle_complete(core, duty);
return ret;
}
static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core,
struct clk_duty *duty)
{
int ret = 0;
if (core->parent &&
core->flags & (CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT)) {
ret = clk_core_set_duty_cycle_nolock(core->parent, duty);
memcpy(&core->duty, &core->parent->duty, sizeof(core->duty));
}
return ret;
}
/**
* clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal
* @clk: clock signal source
* @num: numerator of the duty cycle ratio to be applied
* @den: denominator of the duty cycle ratio to be applied
*
* Apply the duty cycle ratio if the ratio is valid and the clock can
* perform this operation
*
* Returns (0) on success, a negative errno otherwise.
*/
int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den)
{
int ret;
struct clk_duty duty;
if (!clk)
return 0;
/* sanity check the ratio */
if (den == 0 || num > den)
return -EINVAL;
duty.num = num;
duty.den = den;
clk_prepare_lock();
if (clk->exclusive_count)
clk_core_rate_unprotect(clk->core);
ret = clk_core_set_duty_cycle_nolock(clk->core, &duty);
if (clk->exclusive_count)
clk_core_rate_protect(clk->core);
clk_prepare_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(clk_set_duty_cycle);
static int clk_core_get_scaled_duty_cycle(struct clk_core *core,
unsigned int scale)
{
struct clk_duty *duty = &core->duty;
int ret;
clk_prepare_lock();
ret = clk_core_update_duty_cycle_nolock(core);
if (!ret)
ret = mult_frac(scale, duty->num, duty->den);
clk_prepare_unlock();
return ret;
}
/**
* clk_get_scaled_duty_cycle - return the duty cycle ratio of a clock signal
* @clk: clock signal source
* @scale: scaling factor to be applied to represent the ratio as an integer
*
* Returns the duty cycle ratio of a clock node multiplied by the provided
* scaling factor, or negative errno on error.
*/
int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale)
{
if (!clk)
return 0;
return clk_core_get_scaled_duty_cycle(clk->core, scale);
}
EXPORT_SYMBOL_GPL(clk_get_scaled_duty_cycle);
/**
* clk_is_match - check if two clk's point to the same hardware clock
* @p: clk compared against q
* @q: clk compared against p
*
* Returns true if the two struct clk pointers both point to the same hardware
* clock node. Put differently, returns true if struct clk *p and struct clk *q
* share the same struct clk_core object.
*
* Returns false otherwise. Note that two NULL clks are treated as matching.
*/
bool clk_is_match(const struct clk *p, const struct clk *q)
{
/* trivial case: identical struct clk's or both NULL */
if (p == q)
return true;
/* true if clk->core pointers match. Avoid dereferencing garbage */
if (!IS_ERR_OR_NULL(p) && !IS_ERR_OR_NULL(q))
if (p->core == q->core)
return true;
return false;
}
EXPORT_SYMBOL_GPL(clk_is_match);
/*** debugfs support ***/
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
static struct dentry *rootdir;
static int inited = 0;
static DEFINE_MUTEX(clk_debug_lock);
static HLIST_HEAD(clk_debug_list);
static struct hlist_head *all_lists[] = {
&clk_root_list,
&clk_orphan_list,
NULL,
};
static struct hlist_head *orphan_list[] = {
&clk_orphan_list,
NULL,
};
static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
int level)
{
if (!c)
return;
seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %5d %6d\n",
level * 3 + 1, "",
30 - level * 3, c->name,
c->enable_count, c->prepare_count, c->protect_count,
clk_core_get_rate(c), clk_core_get_accuracy(c),
clk_core_get_phase(c),
clk_core_get_scaled_duty_cycle(c, 100000));
}
static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
int level)
{
struct clk_core *child;
if (!c)
return;
clk_summary_show_one(s, c, level);
hlist_for_each_entry(child, &c->children, child_node)
clk_summary_show_subtree(s, child, level + 1);
}
static int clk_summary_show(struct seq_file *s, void *data)
{
struct clk_core *c;
struct hlist_head **lists = (struct hlist_head **)s->private;
seq_puts(s, " enable prepare protect duty\n");
seq_puts(s, " clock count count count rate accuracy phase cycle\n");
seq_puts(s, "---------------------------------------------------------------------------------------------\n");
clk_prepare_lock();
for (; *lists; lists++)
hlist_for_each_entry(c, *lists, child_node)
clk_summary_show_subtree(s, c, 0);
clk_prepare_unlock();
return 0;
}
DEFINE_SHOW_ATTRIBUTE(clk_summary);
static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
{
if (!c)
return;
/* This should be JSON format, i.e. elements separated with a comma */
seq_printf(s, "\"%s\": { ", c->name);
seq_printf(s, "\"enable_count\": %d,", c->enable_count);
seq_printf(s, "\"prepare_count\": %d,", c->prepare_count);
seq_printf(s, "\"protect_count\": %d,", c->protect_count);
seq_printf(s, "\"rate\": %lu,", clk_core_get_rate(c));
seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c));
seq_printf(s, "\"phase\": %d,", clk_core_get_phase(c));
seq_printf(s, "\"duty_cycle\": %u",
clk_core_get_scaled_duty_cycle(c, 100000));
}
static void clk_dump_subtree(struct seq_file *s, struct clk_core *c, int level)
{
struct clk_core *child;
if (!c)
return;
clk_dump_one(s, c, level);
hlist_for_each_entry(child, &c->children, child_node) {
seq_putc(s, ',');
clk_dump_subtree(s, child, level + 1);
}
seq_putc(s, '}');
}
static int clk_dump_show(struct seq_file *s, void *data)
{
struct clk_core *c;
bool first_node = true;
struct hlist_head **lists = (struct hlist_head **)s->private;
seq_putc(s, '{');
clk_prepare_lock();
for (; *lists; lists++) {
hlist_for_each_entry(c, *lists, child_node) {
if (!first_node)
seq_putc(s, ',');
first_node = false;
clk_dump_subtree(s, c, 0);
}
}
clk_prepare_unlock();
seq_puts(s, "}\n");
return 0;
}
DEFINE_SHOW_ATTRIBUTE(clk_dump);
static const struct {
unsigned long flag;
const char *name;
} clk_flags[] = {
#define ENTRY(f) { f, #f }
ENTRY(CLK_SET_RATE_GATE),
ENTRY(CLK_SET_PARENT_GATE),
ENTRY(CLK_SET_RATE_PARENT),
ENTRY(CLK_IGNORE_UNUSED),
ENTRY(CLK_GET_RATE_NOCACHE),
ENTRY(CLK_SET_RATE_NO_REPARENT),
ENTRY(CLK_GET_ACCURACY_NOCACHE),
ENTRY(CLK_RECALC_NEW_RATES),
ENTRY(CLK_SET_RATE_UNGATE),
ENTRY(CLK_IS_CRITICAL),
ENTRY(CLK_OPS_PARENT_ENABLE),
ENTRY(CLK_DUTY_CYCLE_PARENT),
#undef ENTRY
};
static int clk_flags_show(struct seq_file *s, void *data)
{
struct clk_core *core = s->private;
unsigned long flags = core->flags;
unsigned int i;
for (i = 0; flags && i < ARRAY_SIZE(clk_flags); i++) {
if (flags & clk_flags[i].flag) {
seq_printf(s, "%s\n", clk_flags[i].name);
flags &= ~clk_flags[i].flag;
}
}
if (flags) {
/* Unknown flags */
seq_printf(s, "0x%lx\n", flags);
}
return 0;
}
DEFINE_SHOW_ATTRIBUTE(clk_flags);
static void possible_parent_show(struct seq_file *s, struct clk_core *core,
unsigned int i, char terminator)
{
struct clk_core *parent;
/*
* Go through the following options to fetch a parent's name.
*
* 1. Fetch the registered parent clock and use its name
* 2. Use the global (fallback) name if specified
* 3. Use the local fw_name if provided
* 4. Fetch parent clock's clock-output-name if DT index was set
*
* This may still fail in some cases, such as when the parent is
* specified directly via a struct clk_hw pointer, but it isn't
* registered (yet).
*/
parent = clk_core_get_parent_by_index(core, i);
if (parent)
seq_printf(s, "%s", parent->name);
else if (core->parents[i].name)
seq_printf(s, "%s", core->parents[i].name);
else if (core->parents[i].fw_name)
seq_printf(s, "<%s>(fw)", core->parents[i].fw_name);
else if (core->parents[i].index >= 0)
seq_printf(s, "%s",
of_clk_get_parent_name(core->of_node,
core->parents[i].index));
else
seq_puts(s, "(missing)");
seq_putc(s, terminator);
}
static int possible_parents_show(struct seq_file *s, void *data)
{
struct clk_core *core = s->private;
int i;
for (i = 0; i < core->num_parents - 1; i++)
possible_parent_show(s, core, i, ' ');
possible_parent_show(s, core, i, '\n');
return 0;
}
DEFINE_SHOW_ATTRIBUTE(possible_parents);
static int current_parent_show(struct seq_file *s, void *data)
{
struct clk_core *core = s->private;
if (core->parent)
seq_printf(s, "%s\n", core->parent->name);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(current_parent);
static int clk_duty_cycle_show(struct seq_file *s, void *data)
{
struct clk_core *core = s->private;
struct clk_duty *duty = &core->duty;
seq_printf(s, "%u/%u\n", duty->num, duty->den);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(clk_duty_cycle);
static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry)
{
struct dentry *root;
if (!core || !pdentry)
return;
root = debugfs_create_dir(core->name, pdentry);
core->dentry = root;
debugfs_create_ulong("clk_rate", 0444, root, &core->rate);
debugfs_create_ulong("clk_accuracy", 0444, root, &core->accuracy);
debugfs_create_u32("clk_phase", 0444, root, &core->phase);
debugfs_create_file("clk_flags", 0444, root, core, &clk_flags_fops);
debugfs_create_u32("clk_prepare_count", 0444, root, &core->prepare_count);
debugfs_create_u32("clk_enable_count", 0444, root, &core->enable_count);
debugfs_create_u32("clk_protect_count", 0444, root, &core->protect_count);
debugfs_create_u32("clk_notifier_count", 0444, root, &core->notifier_count);
debugfs_create_file("clk_duty_cycle", 0444, root, core,
&clk_duty_cycle_fops);
if (core->num_parents > 0)
debugfs_create_file("clk_parent", 0444, root, core,
&current_parent_fops);
if (core->num_parents > 1)
debugfs_create_file("clk_possible_parents", 0444, root, core,
&possible_parents_fops);
if (core->ops->debug_init)
core->ops->debug_init(core->hw, core->dentry);
}
/**
* clk_debug_register - add a clk node to the debugfs clk directory
* @core: the clk being added to the debugfs clk directory
*
* Dynamically adds a clk to the debugfs clk directory if debugfs has been
* initialized. Otherwise it bails out early since the debugfs clk directory
* will be created lazily by clk_debug_init as part of a late_initcall.
*/
static void clk_debug_register(struct clk_core *core)
{
mutex_lock(&clk_debug_lock);
hlist_add_head(&core->debug_node, &clk_debug_list);
if (inited)
clk_debug_create_one(core, rootdir);
mutex_unlock(&clk_debug_lock);
}
/**
* clk_debug_unregister - remove a clk node from the debugfs clk directory
* @core: the clk being removed from the debugfs clk directory
*
* Dynamically removes a clk and all its child nodes from the
* debugfs clk directory if clk->dentry points to debugfs created by
* clk_debug_register in __clk_core_init.
*/
static void clk_debug_unregister(struct clk_core *core)
{
mutex_lock(&clk_debug_lock);
hlist_del_init(&core->debug_node);
debugfs_remove_recursive(core->dentry);
core->dentry = NULL;
mutex_unlock(&clk_debug_lock);
}
/**
* clk_debug_init - lazily populate the debugfs clk directory
*
* clks are often initialized very early during boot before memory can be
* dynamically allocated and well before debugfs is setup. This function
* populates the debugfs clk directory once at boot-time when we know that
* debugfs is setup. It should only be called once at boot-time, all other clks
* added dynamically will be done so with clk_debug_register.
*/
static int __init clk_debug_init(void)
{
struct clk_core *core;
rootdir = debugfs_create_dir("clk", NULL);
debugfs_create_file("clk_summary", 0444, rootdir, &all_lists,
&clk_summary_fops);
debugfs_create_file("clk_dump", 0444, rootdir, &all_lists,
&clk_dump_fops);
debugfs_create_file("clk_orphan_summary", 0444, rootdir, &orphan_list,
&clk_summary_fops);
debugfs_create_file("clk_orphan_dump", 0444, rootdir, &orphan_list,
&clk_dump_fops);
mutex_lock(&clk_debug_lock);
hlist_for_each_entry(core, &clk_debug_list, debug_node)
clk_debug_create_one(core, rootdir);
inited = 1;
mutex_unlock(&clk_debug_lock);
return 0;
}
late_initcall(clk_debug_init);
#else
static inline void clk_debug_register(struct clk_core *core) { }
static inline void clk_debug_reparent(struct clk_core *core,
struct clk_core *new_parent)
{
}
static inline void clk_debug_unregister(struct clk_core *core)
{
}
#endif
/**
* __clk_core_init - initialize the data structures in a struct clk_core
* @core: clk_core being initialized
*
* Initializes the lists in struct clk_core, queries the hardware for the
* parent and rate and sets them both.
*/
static int __clk_core_init(struct clk_core *core)
{
int ret;
struct clk_core *orphan;
struct hlist_node *tmp2;
unsigned long rate;
if (!core)
return -EINVAL;
clk_prepare_lock();
ret = clk_pm_runtime_get(core);
if (ret)
goto unlock;
/* check to see if a clock with this name is already registered */
if (clk_core_lookup(core->name)) {
pr_debug("%s: clk %s already initialized\n",
__func__, core->name);
ret = -EEXIST;
goto out;
}
/* check that clk_ops are sane. See Documentation/driver-api/clk.rst */
if (core->ops->set_rate &&
!((core->ops->round_rate || core->ops->determine_rate) &&
core->ops->recalc_rate)) {
pr_err("%s: %s must implement .round_rate or .determine_rate in addition to .recalc_rate\n",
__func__, core->name);
ret = -EINVAL;
goto out;
}
if (core->ops->set_parent && !core->ops->get_parent) {
pr_err("%s: %s must implement .get_parent & .set_parent\n",
__func__, core->name);
ret = -EINVAL;
goto out;
}
if (core->num_parents > 1 && !core->ops->get_parent) {
pr_err("%s: %s must implement .get_parent as it has multi parents\n",
__func__, core->name);
ret = -EINVAL;
goto out;
}
if (core->ops->set_rate_and_parent &&
!(core->ops->set_parent && core->ops->set_rate)) {
pr_err("%s: %s must implement .set_parent & .set_rate\n",
__func__, core->name);
ret = -EINVAL;
goto out;
}
core->parent = __clk_init_parent(core);
/*
* Populate core->parent if parent has already been clk_core_init'd. If
* parent has not yet been clk_core_init'd then place clk in the orphan
* list. If clk doesn't have any parents then place it in the root
* clk list.
*
* Every time a new clk is clk_init'd then we walk the list of orphan
* clocks and re-parent any that are children of the clock currently
* being clk_init'd.
*/
if (core->parent) {
hlist_add_head(&core->child_node,
&core->parent->children);
core->orphan = core->parent->orphan;
} else if (!core->num_parents) {
hlist_add_head(&core->child_node, &clk_root_list);
core->orphan = false;
} else {
hlist_add_head(&core->child_node, &clk_orphan_list);
core->orphan = true;
}
/*
* optional platform-specific magic
*
* The .init callback is not used by any of the basic clock types, but
* exists for weird hardware that must perform initialization magic.
* Please consider other ways of solving initialization problems before
* using this callback, as its use is discouraged.
*/
if (core->ops->init)
core->ops->init(core->hw);
/*
* Set clk's accuracy. The preferred method is to use
* .recalc_accuracy. For simple clocks and lazy developers the default
* fallback is to use the parent's accuracy. If a clock doesn't have a
* parent (or is orphaned) then accuracy is set to zero (perfect
* clock).
*/
if (core->ops->recalc_accuracy)
core->accuracy = core->ops->recalc_accuracy(core->hw,
__clk_get_accuracy(core->parent));
else if (core->parent)
core->accuracy = core->parent->accuracy;
else
core->accuracy = 0;
/*
* Set clk's phase.
* Since a phase is by definition relative to its parent, just
* query the current clock phase, or just assume it's in phase.
*/
if (core->ops->get_phase)
core->phase = core->ops->get_phase(core->hw);
else
core->phase = 0;
/*
* Set clk's duty cycle.
*/
clk_core_update_duty_cycle_nolock(core);
/*
* Set clk's rate. The preferred method is to use .recalc_rate. For
* simple clocks and lazy developers the default fallback is to use the
* parent's rate. If a clock doesn't have a parent (or is orphaned)
* then rate is set to zero.
*/
if (core->ops->recalc_rate)
rate = core->ops->recalc_rate(core->hw,
clk_core_get_rate_nolock(core->parent));
else if (core->parent)
rate = core->parent->rate;
else
rate = 0;
core->rate = core->req_rate = rate;
/*
* Enable CLK_IS_CRITICAL clocks so newly added critical clocks
* don't get accidentally disabled when walking the orphan tree and
* reparenting clocks
*/
if (core->flags & CLK_IS_CRITICAL) {
unsigned long flags;
clk_core_prepare(core);
flags = clk_enable_lock();
clk_core_enable(core);
clk_enable_unlock(flags);
}
/*
* walk the list of orphan clocks and reparent any that newly finds a
* parent.
*/
hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
struct clk_core *parent = __clk_init_parent(orphan);
/*
* We need to use __clk_set_parent_before() and _after() to
* to properly migrate any prepare/enable count of the orphan
* clock. This is important for CLK_IS_CRITICAL clocks, which
* are enabled during init but might not have a parent yet.
*/
if (parent) {
/* update the clk tree topology */
__clk_set_parent_before(orphan, parent);
__clk_set_parent_after(orphan, parent, NULL);
__clk_recalc_accuracies(orphan);
__clk_recalc_rates(orphan, 0);
}
}
kref_init(&core->ref);
out:
clk_pm_runtime_put(core);
unlock:
clk_prepare_unlock();
if (!ret)
clk_debug_register(core);
return ret;
}
/**
* clk_core_link_consumer - Add a clk consumer to the list of consumers in a clk_core
* @core: clk to add consumer to
* @clk: consumer to link to a clk
*/
static void clk_core_link_consumer(struct clk_core *core, struct clk *clk)
{
clk_prepare_lock();
hlist_add_head(&clk->clks_node, &core->clks);
clk_prepare_unlock();
}
/**
* clk_core_unlink_consumer - Remove a clk consumer from the list of consumers in a clk_core
* @clk: consumer to unlink
*/
static void clk_core_unlink_consumer(struct clk *clk)
{
lockdep_assert_held(&prepare_lock);
hlist_del(&clk->clks_node);
}
/**
* alloc_clk - Allocate a clk consumer, but leave it unlinked to the clk_core
* @core: clk to allocate a consumer for
* @dev_id: string describing device name
* @con_id: connection ID string on device
*
* Returns: clk consumer left unlinked from the consumer list
*/
static struct clk *alloc_clk(struct clk_core *core, const char *dev_id,
const char *con_id)
{
struct clk *clk;
clk = kzalloc(sizeof(*clk), GFP_KERNEL);
if (!clk)
return ERR_PTR(-ENOMEM);
clk->core = core;
clk->dev_id = dev_id;
clk->con_id = kstrdup_const(con_id, GFP_KERNEL);
clk->max_rate = ULONG_MAX;
return clk;
}
/**
* free_clk - Free a clk consumer
* @clk: clk consumer to free
*
* Note, this assumes the clk has been unlinked from the clk_core consumer
* list.
*/
static void free_clk(struct clk *clk)
{
kfree_const(clk->con_id);
kfree(clk);
}
/**
* clk_hw_create_clk: Allocate and link a clk consumer to a clk_core given
* a clk_hw
* @dev: clk consumer device
* @hw: clk_hw associated with the clk being consumed
* @dev_id: string describing device name
* @con_id: connection ID string on device
*
* This is the main function used to create a clk pointer for use by clk
* consumers. It connects a consumer to the clk_core and clk_hw structures
* used by the framework and clk provider respectively.
*/
struct clk *clk_hw_create_clk(struct device *dev, struct clk_hw *hw,
const char *dev_id, const char *con_id)
{
struct clk *clk;
struct clk_core *core;
/* This is to allow this function to be chained to others */
if (IS_ERR_OR_NULL(hw))
return ERR_CAST(hw);
core = hw->core;
clk = alloc_clk(core, dev_id, con_id);
if (IS_ERR(clk))
return clk;
clk->dev = dev;
if (!try_module_get(core->owner)) {
free_clk(clk);
return ERR_PTR(-ENOENT);
}
kref_get(&core->ref);
clk_core_link_consumer(core, clk);
return clk;
}
static int clk_cpy_name(const char **dst_p, const char *src, bool must_exist)
{
const char *dst;
if (!src) {
if (must_exist)
return -EINVAL;
return 0;
}
*dst_p = dst = kstrdup_const(src, GFP_KERNEL);
if (!dst)
return -ENOMEM;
return 0;
}
static int clk_core_populate_parent_map(struct clk_core *core)
{
const struct clk_init_data *init = core->hw->init;
u8 num_parents = init->num_parents;
const char * const *parent_names = init->parent_names;
const struct clk_hw **parent_hws = init->parent_hws;
const struct clk_parent_data *parent_data = init->parent_data;
int i, ret = 0;
struct clk_parent_map *parents, *parent;
if (!num_parents)
return 0;
/*
* Avoid unnecessary string look-ups of clk_core's possible parents by
* having a cache of names/clk_hw pointers to clk_core pointers.
*/
parents = kcalloc(num_parents, sizeof(*parents), GFP_KERNEL);
core->parents = parents;
if (!parents)
return -ENOMEM;
/* Copy everything over because it might be __initdata */
for (i = 0, parent = parents; i < num_parents; i++, parent++) {
parent->index = -1;
if (parent_names) {
/* throw a WARN if any entries are NULL */
WARN(!parent_names[i],
"%s: invalid NULL in %s's .parent_names\n",
__func__, core->name);
ret = clk_cpy_name(&parent->name, parent_names[i],
true);
} else if (parent_data) {
parent->hw = parent_data[i].hw;
parent->index = parent_data[i].index;
ret = clk_cpy_name(&parent->fw_name,
parent_data[i].fw_name, false);
if (!ret)
ret = clk_cpy_name(&parent->name,
parent_data[i].name,
false);
} else if (parent_hws) {
parent->hw = parent_hws[i];
} else {
ret = -EINVAL;
WARN(1, "Must specify parents if num_parents > 0\n");
}
if (ret) {
do {
kfree_const(parents[i].name);
kfree_const(parents[i].fw_name);
} while (--i >= 0);
kfree(parents);
return ret;
}
}
return 0;
}
static void clk_core_free_parent_map(struct clk_core *core)
{
int i = core->num_parents;
if (!core->num_parents)
return;
while (--i >= 0) {
kfree_const(core->parents[i].name);
kfree_const(core->parents[i].fw_name);
}
kfree(core->parents);
}
static struct clk *
__clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
{
int ret;
struct clk_core *core;
core = kzalloc(sizeof(*core), GFP_KERNEL);
if (!core) {
ret = -ENOMEM;
goto fail_out;
}
core->name = kstrdup_const(hw->init->name, GFP_KERNEL);
if (!core->name) {
ret = -ENOMEM;
goto fail_name;
}
if (WARN_ON(!hw->init->ops)) {
ret = -EINVAL;
goto fail_ops;
}
core->ops = hw->init->ops;
if (dev && pm_runtime_enabled(dev))
core->rpm_enabled = true;
core->dev = dev;
core->of_node = np;
if (dev && dev->driver)
core->owner = dev->driver->owner;
core->hw = hw;
core->flags = hw->init->flags;
core->num_parents = hw->init->num_parents;
core->min_rate = 0;
core->max_rate = ULONG_MAX;
hw->core = core;
ret = clk_core_populate_parent_map(core);
if (ret)
goto fail_parents;
INIT_HLIST_HEAD(&core->clks);
/*
* Don't call clk_hw_create_clk() here because that would pin the
* provider module to itself and prevent it from ever being removed.
*/
hw->clk = alloc_clk(core, NULL, NULL);
if (IS_ERR(hw->clk)) {
ret = PTR_ERR(hw->clk);
goto fail_create_clk;
}
clk_core_link_consumer(hw->core, hw->clk);
ret = __clk_core_init(core);
if (!ret)
return hw->clk;
clk_prepare_lock();
clk_core_unlink_consumer(hw->clk);
clk_prepare_unlock();
free_clk(hw->clk);
hw->clk = NULL;
fail_create_clk:
clk_core_free_parent_map(core);
fail_parents:
fail_ops:
kfree_const(core->name);
fail_name:
kfree(core);
fail_out:
return ERR_PTR(ret);
}
/**
* clk_register - allocate a new clock, register it and return an opaque cookie
* @dev: device that is registering this clock
* @hw: link to hardware-specific clock data
*
* clk_register is the *deprecated* interface for populating the clock tree with
* new clock nodes. Use clk_hw_register() instead.
*
* Returns: a pointer to the newly allocated struct clk which
* cannot be dereferenced by driver code but may be used in conjunction with the
* rest of the clock API. In the event of an error clk_register will return an
* error code; drivers must test for an error code after calling clk_register.
*/
struct clk *clk_register(struct device *dev, struct clk_hw *hw)
{
return __clk_register(dev, dev_of_node(dev), hw);
}
EXPORT_SYMBOL_GPL(clk_register);
/**
* clk_hw_register - register a clk_hw and return an error code
* @dev: device that is registering this clock
* @hw: link to hardware-specific clock data
*
* clk_hw_register is the primary interface for populating the clock tree with
* new clock nodes. It returns an integer equal to zero indicating success or
* less than zero indicating failure. Drivers must test for an error code after
* calling clk_hw_register().
*/
int clk_hw_register(struct device *dev, struct clk_hw *hw)
{
return PTR_ERR_OR_ZERO(__clk_register(dev, dev_of_node(dev), hw));
}
EXPORT_SYMBOL_GPL(clk_hw_register);
/*
* of_clk_hw_register - register a clk_hw and return an error code
* @node: device_node of device that is registering this clock
* @hw: link to hardware-specific clock data
*
* of_clk_hw_register() is the primary interface for populating the clock tree
* with new clock nodes when a struct device is not available, but a struct
* device_node is. It returns an integer equal to zero indicating success or
* less than zero indicating failure. Drivers must test for an error code after
* calling of_clk_hw_register().
*/
int of_clk_hw_register(struct device_node *node, struct clk_hw *hw)
{
return PTR_ERR_OR_ZERO(__clk_register(NULL, node, hw));
}
EXPORT_SYMBOL_GPL(of_clk_hw_register);
/* Free memory allocated for a clock. */
static void __clk_release(struct kref *ref)
{
struct clk_core *core = container_of(ref, struct clk_core, ref);
lockdep_assert_held(&prepare_lock);
clk_core_free_parent_map(core);
kfree_const(core->name);
kfree(core);
}
/*
* Empty clk_ops for unregistered clocks. These are used temporarily
* after clk_unregister() was called on a clock and until last clock
* consumer calls clk_put() and the struct clk object is freed.
*/
static int clk_nodrv_prepare_enable(struct clk_hw *hw)
{
return -ENXIO;
}
static void clk_nodrv_disable_unprepare(struct clk_hw *hw)
{
WARN_ON_ONCE(1);
}
static int clk_nodrv_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
return -ENXIO;
}
static int clk_nodrv_set_parent(struct clk_hw *hw, u8 index)
{
return -ENXIO;
}
static const struct clk_ops clk_nodrv_ops = {
.enable = clk_nodrv_prepare_enable,
.disable = clk_nodrv_disable_unprepare,
.prepare = clk_nodrv_prepare_enable,
.unprepare = clk_nodrv_disable_unprepare,
.set_rate = clk_nodrv_set_rate,
.set_parent = clk_nodrv_set_parent,
};
/**
* clk_unregister - unregister a currently registered clock
* @clk: clock to unregister
*/
void clk_unregister(struct clk *clk)
{
unsigned long flags;
if (!clk || WARN_ON_ONCE(IS_ERR(clk)))
return;
clk_debug_unregister(clk->core);
clk_prepare_lock();
if (clk->core->ops == &clk_nodrv_ops) {
pr_err("%s: unregistered clock: %s\n", __func__,
clk->core->name);
goto unlock;
}
/*
* Assign empty clock ops for consumers that might still hold
* a reference to this clock.
*/
flags = clk_enable_lock();
clk->core->ops = &clk_nodrv_ops;
clk_enable_unlock(flags);
if (!hlist_empty(&clk->core->children)) {
struct clk_core *child;
struct hlist_node *t;
/* Reparent all children to the orphan list. */
hlist_for_each_entry_safe(child, t, &clk->core->children,
child_node)
clk_core_set_parent_nolock(child, NULL);
}
hlist_del_init(&clk->core->child_node);
if (clk->core->prepare_count)
pr_warn("%s: unregistering prepared clock: %s\n",
__func__, clk->core->name);
if (clk->core->protect_count)
pr_warn("%s: unregistering protected clock: %s\n",
__func__, clk->core->name);
kref_put(&clk->core->ref, __clk_release);
unlock:
clk_prepare_unlock();
}
EXPORT_SYMBOL_GPL(clk_unregister);
/**
* clk_hw_unregister - unregister a currently registered clk_hw
* @hw: hardware-specific clock data to unregister
*/
void clk_hw_unregister(struct clk_hw *hw)
{
clk_unregister(hw->clk);
}
EXPORT_SYMBOL_GPL(clk_hw_unregister);
static void devm_clk_release(struct device *dev, void *res)
{
clk_unregister(*(struct clk **)res);
}
static void devm_clk_hw_release(struct device *dev, void *res)
{
clk_hw_unregister(*(struct clk_hw **)res);
}
/**
* devm_clk_register - resource managed clk_register()
* @dev: device that is registering this clock
* @hw: link to hardware-specific clock data
*
* Managed clk_register(). This function is *deprecated*, use devm_clk_hw_register() instead.
*
* Clocks returned from this function are automatically clk_unregister()ed on
* driver detach. See clk_register() for more information.
*/
struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw)
{
struct clk *clk;
struct clk **clkp;
clkp = devres_alloc(devm_clk_release, sizeof(*clkp), GFP_KERNEL);
if (!clkp)
return ERR_PTR(-ENOMEM);
clk = clk_register(dev, hw);
if (!IS_ERR(clk)) {
*clkp = clk;
devres_add(dev, clkp);
} else {
devres_free(clkp);
}
return clk;
}
EXPORT_SYMBOL_GPL(devm_clk_register);
/**
* devm_clk_hw_register - resource managed clk_hw_register()
* @dev: device that is registering this clock
* @hw: link to hardware-specific clock data
*
* Managed clk_hw_register(). Clocks registered by this function are
* automatically clk_hw_unregister()ed on driver detach. See clk_hw_register()
* for more information.
*/
int devm_clk_hw_register(struct device *dev, struct clk_hw *hw)
{
struct clk_hw **hwp;
int ret;
hwp = devres_alloc(devm_clk_hw_release, sizeof(*hwp), GFP_KERNEL);
if (!hwp)
return -ENOMEM;
ret = clk_hw_register(dev, hw);
if (!ret) {
*hwp = hw;
devres_add(dev, hwp);
} else {
devres_free(hwp);
}
return ret;
}
EXPORT_SYMBOL_GPL(devm_clk_hw_register);
static int devm_clk_match(struct device *dev, void *res, void *data)
{
struct clk *c = res;
if (WARN_ON(!c))
return 0;
return c == data;
}
static int devm_clk_hw_match(struct device *dev, void *res, void *data)
{
struct clk_hw *hw = res;
if (WARN_ON(!hw))
return 0;
return hw == data;
}
/**
* devm_clk_unregister - resource managed clk_unregister()
* @clk: clock to unregister
*
* Deallocate a clock allocated with devm_clk_register(). Normally
* this function will not need to be called and the resource management
* code will ensure that the resource is freed.
*/
void devm_clk_unregister(struct device *dev, struct clk *clk)
{
WARN_ON(devres_release(dev, devm_clk_release, devm_clk_match, clk));
}
EXPORT_SYMBOL_GPL(devm_clk_unregister);
/**
* devm_clk_hw_unregister - resource managed clk_hw_unregister()
* @dev: device that is unregistering the hardware-specific clock data
* @hw: link to hardware-specific clock data
*
* Unregister a clk_hw registered with devm_clk_hw_register(). Normally
* this function will not need to be called and the resource management
* code will ensure that the resource is freed.
*/
void devm_clk_hw_unregister(struct device *dev, struct clk_hw *hw)
{
WARN_ON(devres_release(dev, devm_clk_hw_release, devm_clk_hw_match,
hw));
}
EXPORT_SYMBOL_GPL(devm_clk_hw_unregister);
/*
* clkdev helpers
*/
void __clk_put(struct clk *clk)
{
struct module *owner;
if (!clk || WARN_ON_ONCE(IS_ERR(clk)))
return;
clk_prepare_lock();
/*
* Before calling clk_put, all calls to clk_rate_exclusive_get() from a
* given user should be balanced with calls to clk_rate_exclusive_put()
* and by that same consumer
*/
if (WARN_ON(clk->exclusive_count)) {
/* We voiced our concern, let's sanitize the situation */
clk->core->protect_count -= (clk->exclusive_count - 1);
clk_core_rate_unprotect(clk->core);
clk->exclusive_count = 0;
}
hlist_del(&clk->clks_node);
if (clk->min_rate > clk->core->req_rate ||
clk->max_rate < clk->core->req_rate)
clk_core_set_rate_nolock(clk->core, clk->core->req_rate);
owner = clk->core->owner;
kref_put(&clk->core->ref, __clk_release);
clk_prepare_unlock();
module_put(owner);
free_clk(clk);
}
/*** clk rate change notifiers ***/
/**
* clk_notifier_register - add a clk rate change notifier
* @clk: struct clk * to watch
* @nb: struct notifier_block * with callback info
*
* Request notification when clk's rate changes. This uses an SRCU
* notifier because we want it to block and notifier unregistrations are
* uncommon. The callbacks associated with the notifier must not
* re-enter into the clk framework by calling any top-level clk APIs;
* this will cause a nested prepare_lock mutex.
*
* In all notification cases (pre, post and abort rate change) the original
* clock rate is passed to the callback via struct clk_notifier_data.old_rate
* and the new frequency is passed via struct clk_notifier_data.new_rate.
*
* clk_notifier_register() must be called from non-atomic context.
* Returns -EINVAL if called with null arguments, -ENOMEM upon
* allocation failure; otherwise, passes along the return value of
* srcu_notifier_chain_register().
*/
int clk_notifier_register(struct clk *clk, struct notifier_block *nb)
{
struct clk_notifier *cn;
int ret = -ENOMEM;
if (!clk || !nb)
return -EINVAL;
clk_prepare_lock();
/* search the list of notifiers for this clk */
list_for_each_entry(cn, &clk_notifier_list, node)
if (cn->clk == clk)
break;
/* if clk wasn't in the notifier list, allocate new clk_notifier */
if (cn->clk != clk) {
cn = kzalloc(sizeof(*cn), GFP_KERNEL);
if (!cn)
goto out;
cn->clk = clk;
srcu_init_notifier_head(&cn->notifier_head);
list_add(&cn->node, &clk_notifier_list);
}
ret = srcu_notifier_chain_register(&cn->notifier_head, nb);
clk->core->notifier_count++;
out:
clk_prepare_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(clk_notifier_register);
/**
* clk_notifier_unregister - remove a clk rate change notifier
* @clk: struct clk *
* @nb: struct notifier_block * with callback info
*
* Request no further notification for changes to 'clk' and frees memory
* allocated in clk_notifier_register.
*
* Returns -EINVAL if called with null arguments; otherwise, passes
* along the return value of srcu_notifier_chain_unregister().
*/
int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb)
{
struct clk_notifier *cn = NULL;
int ret = -EINVAL;
if (!clk || !nb)
return -EINVAL;
clk_prepare_lock();
list_for_each_entry(cn, &clk_notifier_list, node)
if (cn->clk == clk)
break;
if (cn->clk == clk) {
ret = srcu_notifier_chain_unregister(&cn->notifier_head, nb);
clk->core->notifier_count--;
/* XXX the notifier code should handle this better */
if (!cn->notifier_head.head) {
srcu_cleanup_notifier_head(&cn->notifier_head);
list_del(&cn->node);
kfree(cn);
}
} else {
ret = -ENOENT;
}
clk_prepare_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(clk_notifier_unregister);
#ifdef CONFIG_OF
/**
* struct of_clk_provider - Clock provider registration structure
* @link: Entry in global list of clock providers
* @node: Pointer to device tree node of clock provider
* @get: Get clock callback. Returns NULL or a struct clk for the
* given clock specifier
* @data: context pointer to be passed into @get callback
*/
struct of_clk_provider {
struct list_head link;
struct device_node *node;
struct clk *(*get)(struct of_phandle_args *clkspec, void *data);
struct clk_hw *(*get_hw)(struct of_phandle_args *clkspec, void *data);
void *data;
};
extern struct of_device_id __clk_of_table;
static const struct of_device_id __clk_of_table_sentinel
__used __section(__clk_of_table_end);
static LIST_HEAD(of_clk_providers);
static DEFINE_MUTEX(of_clk_mutex);
struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
void *data)
{
return data;
}
EXPORT_SYMBOL_GPL(of_clk_src_simple_get);
struct clk_hw *of_clk_hw_simple_get(struct of_phandle_args *clkspec, void *data)
{
return data;
}
EXPORT_SYMBOL_GPL(of_clk_hw_simple_get);
struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data)
{
struct clk_onecell_data *clk_data = data;
unsigned int idx = clkspec->args[0];
if (idx >= clk_data->clk_num) {
pr_err("%s: invalid clock index %u\n", __func__, idx);
return ERR_PTR(-EINVAL);
}
return clk_data->clks[idx];
}
EXPORT_SYMBOL_GPL(of_clk_src_onecell_get);
struct clk_hw *
of_clk_hw_onecell_get(struct of_phandle_args *clkspec, void *data)
{
struct clk_hw_onecell_data *hw_data = data;
unsigned int idx = clkspec->args[0];
if (idx >= hw_data->num) {
pr_err("%s: invalid index %u\n", __func__, idx);
return ERR_PTR(-EINVAL);
}
return hw_data->hws[idx];
}
EXPORT_SYMBOL_GPL(of_clk_hw_onecell_get);
/**
* of_clk_add_provider() - Register a clock provider for a node
* @np: Device node pointer associated with clock provider
* @clk_src_get: callback for decoding clock
* @data: context pointer for @clk_src_get callback.
*
* This function is *deprecated*. Use of_clk_add_hw_provider() instead.
*/
int of_clk_add_provider(struct device_node *np,
struct clk *(*clk_src_get)(struct of_phandle_args *clkspec,
void *data),
void *data)
{
struct of_clk_provider *cp;
int ret;
cp = kzalloc(sizeof(*cp), GFP_KERNEL);
if (!cp)
return -ENOMEM;
cp->node = of_node_get(np);
cp->data = data;
cp->get = clk_src_get;
mutex_lock(&of_clk_mutex);
list_add(&cp->link, &of_clk_providers);
mutex_unlock(&of_clk_mutex);
pr_debug("Added clock from %pOF\n", np);
ret = of_clk_set_defaults(np, true);
if (ret < 0)
of_clk_del_provider(np);
return ret;
}
EXPORT_SYMBOL_GPL(of_clk_add_provider);
/**
* of_clk_add_hw_provider() - Register a clock provider for a node
* @np: Device node pointer associated with clock provider
* @get: callback for decoding clk_hw
* @data: context pointer for @get callback.
*/
int of_clk_add_hw_provider(struct device_node *np,
struct clk_hw *(*get)(struct of_phandle_args *clkspec,
void *data),
void *data)
{
struct of_clk_provider *cp;
int ret;
cp = kzalloc(sizeof(*cp), GFP_KERNEL);
if (!cp)
return -ENOMEM;
cp->node = of_node_get(np);
cp->data = data;
cp->get_hw = get;
mutex_lock(&of_clk_mutex);
list_add(&cp->link, &of_clk_providers);
mutex_unlock(&of_clk_mutex);
pr_debug("Added clk_hw provider from %pOF\n", np);
ret = of_clk_set_defaults(np, true);
if (ret < 0)
of_clk_del_provider(np);
return ret;
}
EXPORT_SYMBOL_GPL(of_clk_add_hw_provider);
static void devm_of_clk_release_provider(struct device *dev, void *res)
{
of_clk_del_provider(*(struct device_node **)res);
}
/*
* We allow a child device to use its parent device as the clock provider node
* for cases like MFD sub-devices where the child device driver wants to use
* devm_*() APIs but not list the device in DT as a sub-node.
*/
static struct device_node *get_clk_provider_node(struct device *dev)
{
struct device_node *np, *parent_np;
np = dev->of_node;
parent_np = dev->parent ? dev->parent->of_node : NULL;
if (!of_find_property(np, "#clock-cells", NULL))
if (of_find_property(parent_np, "#clock-cells", NULL))
np = parent_np;
return np;
}
/**
* devm_of_clk_add_hw_provider() - Managed clk provider node registration
* @dev: Device acting as the clock provider (used for DT node and lifetime)
* @get: callback for decoding clk_hw
* @data: context pointer for @get callback
*
* Registers clock provider for given device's node. If the device has no DT
* node or if the device node lacks of clock provider information (#clock-cells)
* then the parent device's node is scanned for this information. If parent node
* has the #clock-cells then it is used in registration. Provider is
* automatically released at device exit.
*
* Return: 0 on success or an errno on failure.
*/
int devm_of_clk_add_hw_provider(struct device *dev,
struct clk_hw *(*get)(struct of_phandle_args *clkspec,
void *data),
void *data)
{
struct device_node **ptr, *np;
int ret;
ptr = devres_alloc(devm_of_clk_release_provider, sizeof(*ptr),
GFP_KERNEL);
if (!ptr)
return -ENOMEM;
np = get_clk_provider_node(dev);
ret = of_clk_add_hw_provider(np, get, data);
if (!ret) {
*ptr = np;
devres_add(dev, ptr);
} else {
devres_free(ptr);
}
return ret;
}
EXPORT_SYMBOL_GPL(devm_of_clk_add_hw_provider);
/**
* of_clk_del_provider() - Remove a previously registered clock provider
* @np: Device node pointer associated with clock provider
*/
void of_clk_del_provider(struct device_node *np)
{
struct of_clk_provider *cp;
mutex_lock(&of_clk_mutex);
list_for_each_entry(cp, &of_clk_providers, link) {
if (cp->node == np) {
list_del(&cp->link);
of_node_put(cp->node);
kfree(cp);
break;
}
}
mutex_unlock(&of_clk_mutex);
}
EXPORT_SYMBOL_GPL(of_clk_del_provider);
static int devm_clk_provider_match(struct device *dev, void *res, void *data)
{
struct device_node **np = res;
if (WARN_ON(!np || !*np))
return 0;
return *np == data;
}
/**
* devm_of_clk_del_provider() - Remove clock provider registered using devm
* @dev: Device to whose lifetime the clock provider was bound
*/
void devm_of_clk_del_provider(struct device *dev)
{
int ret;
struct device_node *np = get_clk_provider_node(dev);
ret = devres_release(dev, devm_of_clk_release_provider,
devm_clk_provider_match, np);
WARN_ON(ret);
}
EXPORT_SYMBOL(devm_of_clk_del_provider);
/*
* Beware the return values when np is valid, but no clock provider is found.
* If name == NULL, the function returns -ENOENT.
* If name != NULL, the function returns -EINVAL. This is because
* of_parse_phandle_with_args() is called even if of_property_match_string()
* returns an error.
*/
static int of_parse_clkspec(const struct device_node *np, int index,
const char *name, struct of_phandle_args *out_args)
{
int ret = -ENOENT;
/* Walk up the tree of devices looking for a clock property that matches */
while (np) {
/*
* For named clocks, first look up the name in the
* "clock-names" property. If it cannot be found, then index
* will be an error code and of_parse_phandle_with_args() will
* return -EINVAL.
*/
if (name)
index = of_property_match_string(np, "clock-names", name);
ret = of_parse_phandle_with_args(np, "clocks", "#clock-cells",
index, out_args);
if (!ret)
break;
if (name && index >= 0)
break;
/*
* No matching clock found on this node. If the parent node
* has a "clock-ranges" property, then we can try one of its
* clocks.
*/
np = np->parent;
if (np && !of_get_property(np, "clock-ranges", NULL))
break;
index = 0;
}
return ret;
}
static struct clk_hw *
__of_clk_get_hw_from_provider(struct of_clk_provider *provider,
struct of_phandle_args *clkspec)
{
struct clk *clk;
if (provider->get_hw)
return provider->get_hw(clkspec, provider->data);
clk = provider->get(clkspec, provider->data);
if (IS_ERR(clk))
return ERR_CAST(clk);
return __clk_get_hw(clk);
}
static struct clk_hw *
of_clk_get_hw_from_clkspec(struct of_phandle_args *clkspec)
{
struct of_clk_provider *provider;
struct clk_hw *hw = ERR_PTR(-EPROBE_DEFER);
if (!clkspec)
return ERR_PTR(-EINVAL);
mutex_lock(&of_clk_mutex);
list_for_each_entry(provider, &of_clk_providers, link) {
if (provider->node == clkspec->np) {
hw = __of_clk_get_hw_from_provider(provider, clkspec);
if (!IS_ERR(hw))
break;
}
}
mutex_unlock(&of_clk_mutex);
return hw;
}
/**
* of_clk_get_from_provider() - Lookup a clock from a clock provider
* @clkspec: pointer to a clock specifier data structure
*
* This function looks up a struct clk from the registered list of clock
* providers, an input is a clock specifier data structure as returned
* from the of_parse_phandle_with_args() function call.
*/
struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec)
{
struct clk_hw *hw = of_clk_get_hw_from_clkspec(clkspec);
return clk_hw_create_clk(NULL, hw, NULL, __func__);
}
EXPORT_SYMBOL_GPL(of_clk_get_from_provider);
struct clk_hw *of_clk_get_hw(struct device_node *np, int index,
const char *con_id)
{
int ret;
struct clk_hw *hw;
struct of_phandle_args clkspec;
ret = of_parse_clkspec(np, index, con_id, &clkspec);
if (ret)
return ERR_PTR(ret);
hw = of_clk_get_hw_from_clkspec(&clkspec);
of_node_put(clkspec.np);
return hw;
}
static struct clk *__of_clk_get(struct device_node *np,
int index, const char *dev_id,
const char *con_id)
{
struct clk_hw *hw = of_clk_get_hw(np, index, con_id);
return clk_hw_create_clk(NULL, hw, dev_id, con_id);
}
struct clk *of_clk_get(struct device_node *np, int index)
{
return __of_clk_get(np, index, np->full_name, NULL);
}
EXPORT_SYMBOL(of_clk_get);
/**
* of_clk_get_by_name() - Parse and lookup a clock referenced by a device node
* @np: pointer to clock consumer node
* @name: name of consumer's clock input, or NULL for the first clock reference
*
* This function parses the clocks and clock-names properties,
* and uses them to look up the struct clk from the registered list of clock
* providers.
*/
struct clk *of_clk_get_by_name(struct device_node *np, const char *name)
{
if (!np)
return ERR_PTR(-ENOENT);
return __of_clk_get(np, 0, np->full_name, name);
}
EXPORT_SYMBOL(of_clk_get_by_name);
/**
* of_clk_get_parent_count() - Count the number of clocks a device node has
* @np: device node to count
*
* Returns: The number of clocks that are possible parents of this node
*/
unsigned int of_clk_get_parent_count(struct device_node *np)
{
int count;
count = of_count_phandle_with_args(np, "clocks", "#clock-cells");
if (count < 0)
return 0;
return count;
}
EXPORT_SYMBOL_GPL(of_clk_get_parent_count);
const char *of_clk_get_parent_name(struct device_node *np, int index)
{
struct of_phandle_args clkspec;
struct property *prop;
const char *clk_name;
const __be32 *vp;
u32 pv;
int rc;
int count;
struct clk *clk;
rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", index,
&clkspec);
if (rc)
return NULL;
index = clkspec.args_count ? clkspec.args[0] : 0;
count = 0;
/* if there is an indices property, use it to transfer the index
* specified into an array offset for the clock-output-names property.
*/
of_property_for_each_u32(clkspec.np, "clock-indices", prop, vp, pv) {
if (index == pv) {
index = count;
break;
}
count++;
}
/* We went off the end of 'clock-indices' without finding it */
if (prop && !vp)
return NULL;
if (of_property_read_string_index(clkspec.np, "clock-output-names",
index,
&clk_name) < 0) {
/*
* Best effort to get the name if the clock has been
* registered with the framework. If the clock isn't
* registered, we return the node name as the name of
* the clock as long as #clock-cells = 0.
*/
clk = of_clk_get_from_provider(&clkspec);
if (IS_ERR(clk)) {
if (clkspec.args_count == 0)
clk_name = clkspec.np->name;
else
clk_name = NULL;
} else {
clk_name = __clk_get_name(clk);
clk_put(clk);
}
}
of_node_put(clkspec.np);
return clk_name;
}
EXPORT_SYMBOL_GPL(of_clk_get_parent_name);
/**
* of_clk_parent_fill() - Fill @parents with names of @np's parents and return
* number of parents
* @np: Device node pointer associated with clock provider
* @parents: pointer to char array that hold the parents' names
* @size: size of the @parents array
*
* Return: number of parents for the clock node.
*/
int of_clk_parent_fill(struct device_node *np, const char **parents,
unsigned int size)
{
unsigned int i = 0;
while (i < size && (parents[i] = of_clk_get_parent_name(np, i)) != NULL)
i++;
return i;
}
EXPORT_SYMBOL_GPL(of_clk_parent_fill);
struct clock_provider {
void (*clk_init_cb)(struct device_node *);
struct device_node *np;
struct list_head node;
};
/*
* This function looks for a parent clock. If there is one, then it
* checks that the provider for this parent clock was initialized, in
* this case the parent clock will be ready.
*/
static int parent_ready(struct device_node *np)
{
int i = 0;
while (true) {
struct clk *clk = of_clk_get(np, i);
/* this parent is ready we can check the next one */
if (!IS_ERR(clk)) {
clk_put(clk);
i++;
continue;
}
/* at least one parent is not ready, we exit now */
if (PTR_ERR(clk) == -EPROBE_DEFER)
return 0;
/*
* Here we make assumption that the device tree is
* written correctly. So an error means that there is
* no more parent. As we didn't exit yet, then the
* previous parent are ready. If there is no clock
* parent, no need to wait for them, then we can
* consider their absence as being ready
*/
return 1;
}
}
/**
* of_clk_detect_critical() - set CLK_IS_CRITICAL flag from Device Tree
* @np: Device node pointer associated with clock provider
* @index: clock index
* @flags: pointer to top-level framework flags
*
* Detects if the clock-critical property exists and, if so, sets the
* corresponding CLK_IS_CRITICAL flag.
*
* Do not use this function. It exists only for legacy Device Tree
* bindings, such as the one-clock-per-node style that are outdated.
* Those bindings typically put all clock data into .dts and the Linux
* driver has no clock data, thus making it impossible to set this flag
* correctly from the driver. Only those drivers may call
* of_clk_detect_critical from their setup functions.
*
* Return: error code or zero on success
*/
int of_clk_detect_critical(struct device_node *np,
int index, unsigned long *flags)
{
struct property *prop;
const __be32 *cur;
uint32_t idx;
if (!np || !flags)
return -EINVAL;
of_property_for_each_u32(np, "clock-critical", prop, cur, idx)
if (index == idx)
*flags |= CLK_IS_CRITICAL;
return 0;
}
/**
* of_clk_init() - Scan and init clock providers from the DT
* @matches: array of compatible values and init functions for providers.
*
* This function scans the device tree for matching clock providers
* and calls their initialization functions. It also does it by trying
* to follow the dependencies.
*/
void __init of_clk_init(const struct of_device_id *matches)
{
const struct of_device_id *match;
struct device_node *np;
struct clock_provider *clk_provider, *next;
bool is_init_done;
bool force = false;
LIST_HEAD(clk_provider_list);
if (!matches)
matches = &__clk_of_table;
/* First prepare the list of the clocks providers */
for_each_matching_node_and_match(np, matches, &match) {
struct clock_provider *parent;
if (!of_device_is_available(np))
continue;
parent = kzalloc(sizeof(*parent), GFP_KERNEL);
if (!parent) {
list_for_each_entry_safe(clk_provider, next,
&clk_provider_list, node) {
list_del(&clk_provider->node);
of_node_put(clk_provider->np);
kfree(clk_provider);
}
of_node_put(np);
return;
}
parent->clk_init_cb = match->data;
parent->np = of_node_get(np);
list_add_tail(&parent->node, &clk_provider_list);
}
while (!list_empty(&clk_provider_list)) {
is_init_done = false;
list_for_each_entry_safe(clk_provider, next,
&clk_provider_list, node) {
if (force || parent_ready(clk_provider->np)) {
/* Don't populate platform devices */
of_node_set_flag(clk_provider->np,
OF_POPULATED);
clk_provider->clk_init_cb(clk_provider->np);
of_clk_set_defaults(clk_provider->np, true);
list_del(&clk_provider->node);
of_node_put(clk_provider->np);
kfree(clk_provider);
is_init_done = true;
}
}
/*
* We didn't manage to initialize any of the
* remaining providers during the last loop, so now we
* initialize all the remaining ones unconditionally
* in case the clock parent was not mandatory
*/
if (!is_init_done)
force = true;
}
}
#endif