mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 02:56:44 +07:00
defb149ba4
Add eclk mux and clock divider table. Also change the video engine reset to the correct clock; it was previously on the video capture but needs to be on the video engine clock. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
774 lines
21 KiB
C
774 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
#define pr_fmt(fmt) "clk-aspeed: " fmt
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/reset-controller.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <dt-bindings/clock/aspeed-clock.h>
|
|
|
|
#define ASPEED_NUM_CLKS 36
|
|
|
|
#define ASPEED_RESET2_OFFSET 32
|
|
|
|
#define ASPEED_RESET_CTRL 0x04
|
|
#define ASPEED_CLK_SELECTION 0x08
|
|
#define ASPEED_CLK_STOP_CTRL 0x0c
|
|
#define ASPEED_MPLL_PARAM 0x20
|
|
#define ASPEED_HPLL_PARAM 0x24
|
|
#define AST2500_HPLL_BYPASS_EN BIT(20)
|
|
#define AST2400_HPLL_PROGRAMMED BIT(18)
|
|
#define AST2400_HPLL_BYPASS_EN BIT(17)
|
|
#define ASPEED_MISC_CTRL 0x2c
|
|
#define UART_DIV13_EN BIT(12)
|
|
#define ASPEED_STRAP 0x70
|
|
#define CLKIN_25MHZ_EN BIT(23)
|
|
#define AST2400_CLK_SOURCE_SEL BIT(18)
|
|
#define ASPEED_CLK_SELECTION_2 0xd8
|
|
#define ASPEED_RESET_CTRL2 0xd4
|
|
|
|
/* Globally visible clocks */
|
|
static DEFINE_SPINLOCK(aspeed_clk_lock);
|
|
|
|
/* Keeps track of all clocks */
|
|
static struct clk_hw_onecell_data *aspeed_clk_data;
|
|
|
|
static void __iomem *scu_base;
|
|
|
|
/**
|
|
* struct aspeed_gate_data - Aspeed gated clocks
|
|
* @clock_idx: bit used to gate this clock in the clock register
|
|
* @reset_idx: bit used to reset this IP in the reset register. -1 if no
|
|
* reset is required when enabling the clock
|
|
* @name: the clock name
|
|
* @parent_name: the name of the parent clock
|
|
* @flags: standard clock framework flags
|
|
*/
|
|
struct aspeed_gate_data {
|
|
u8 clock_idx;
|
|
s8 reset_idx;
|
|
const char *name;
|
|
const char *parent_name;
|
|
unsigned long flags;
|
|
};
|
|
|
|
/**
|
|
* struct aspeed_clk_gate - Aspeed specific clk_gate structure
|
|
* @hw: handle between common and hardware-specific interfaces
|
|
* @reg: register controlling gate
|
|
* @clock_idx: bit used to gate this clock in the clock register
|
|
* @reset_idx: bit used to reset this IP in the reset register. -1 if no
|
|
* reset is required when enabling the clock
|
|
* @flags: hardware-specific flags
|
|
* @lock: register lock
|
|
*
|
|
* Some of the clocks in the Aspeed SoC must be put in reset before enabling.
|
|
* This modified version of clk_gate allows an optional reset bit to be
|
|
* specified.
|
|
*/
|
|
struct aspeed_clk_gate {
|
|
struct clk_hw hw;
|
|
struct regmap *map;
|
|
u8 clock_idx;
|
|
s8 reset_idx;
|
|
u8 flags;
|
|
spinlock_t *lock;
|
|
};
|
|
|
|
#define to_aspeed_clk_gate(_hw) container_of(_hw, struct aspeed_clk_gate, hw)
|
|
|
|
/* TODO: ask Aspeed about the actual parent data */
|
|
static const struct aspeed_gate_data aspeed_gates[] = {
|
|
/* clk rst name parent flags */
|
|
[ASPEED_CLK_GATE_ECLK] = { 0, 6, "eclk-gate", "eclk", 0 }, /* Video Engine */
|
|
[ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */
|
|
[ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */
|
|
[ASPEED_CLK_GATE_VCLK] = { 3, -1, "vclk-gate", NULL, 0 }, /* Video Capture */
|
|
[ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", CLK_IS_CRITICAL }, /* PCIe/PCI */
|
|
[ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, CLK_IS_CRITICAL }, /* DAC */
|
|
[ASPEED_CLK_GATE_REFCLK] = { 6, -1, "refclk-gate", "clkin", CLK_IS_CRITICAL },
|
|
[ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */
|
|
[ASPEED_CLK_GATE_LCLK] = { 8, 5, "lclk-gate", NULL, 0 }, /* LPC */
|
|
[ASPEED_CLK_GATE_USBUHCICLK] = { 9, 15, "usb-uhci-gate", NULL, 0 }, /* USB1.1 (requires port 2 enabled) */
|
|
[ASPEED_CLK_GATE_D1CLK] = { 10, 13, "d1clk-gate", NULL, 0 }, /* GFX CRT */
|
|
[ASPEED_CLK_GATE_YCLK] = { 13, 4, "yclk-gate", NULL, 0 }, /* HAC */
|
|
[ASPEED_CLK_GATE_USBPORT1CLK] = { 14, 14, "usb-port1-gate", NULL, 0 }, /* USB2 hub/USB2 host port 1/USB1.1 dev */
|
|
[ASPEED_CLK_GATE_UART1CLK] = { 15, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */
|
|
[ASPEED_CLK_GATE_UART2CLK] = { 16, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */
|
|
[ASPEED_CLK_GATE_UART5CLK] = { 17, -1, "uart5clk-gate", "uart", 0 }, /* UART5 */
|
|
[ASPEED_CLK_GATE_ESPICLK] = { 19, -1, "espiclk-gate", NULL, 0 }, /* eSPI */
|
|
[ASPEED_CLK_GATE_MAC1CLK] = { 20, 11, "mac1clk-gate", "mac", 0 }, /* MAC1 */
|
|
[ASPEED_CLK_GATE_MAC2CLK] = { 21, 12, "mac2clk-gate", "mac", 0 }, /* MAC2 */
|
|
[ASPEED_CLK_GATE_RSACLK] = { 24, -1, "rsaclk-gate", NULL, 0 }, /* RSA */
|
|
[ASPEED_CLK_GATE_UART3CLK] = { 25, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */
|
|
[ASPEED_CLK_GATE_UART4CLK] = { 26, -1, "uart4clk-gate", "uart", 0 }, /* UART4 */
|
|
[ASPEED_CLK_GATE_SDCLK] = { 27, 16, "sdclk-gate", NULL, 0 }, /* SDIO/SD */
|
|
[ASPEED_CLK_GATE_LHCCLK] = { 28, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */
|
|
};
|
|
|
|
static const char * const eclk_parent_names[] = {
|
|
"mpll",
|
|
"hpll",
|
|
"dpll",
|
|
};
|
|
|
|
static const struct clk_div_table ast2500_eclk_div_table[] = {
|
|
{ 0x0, 2 },
|
|
{ 0x1, 2 },
|
|
{ 0x2, 3 },
|
|
{ 0x3, 4 },
|
|
{ 0x4, 5 },
|
|
{ 0x5, 6 },
|
|
{ 0x6, 7 },
|
|
{ 0x7, 8 },
|
|
{ 0 }
|
|
};
|
|
|
|
static const struct clk_div_table ast2500_mac_div_table[] = {
|
|
{ 0x0, 4 }, /* Yep, really. Aspeed confirmed this is correct */
|
|
{ 0x1, 4 },
|
|
{ 0x2, 6 },
|
|
{ 0x3, 8 },
|
|
{ 0x4, 10 },
|
|
{ 0x5, 12 },
|
|
{ 0x6, 14 },
|
|
{ 0x7, 16 },
|
|
{ 0 }
|
|
};
|
|
|
|
static const struct clk_div_table ast2400_div_table[] = {
|
|
{ 0x0, 2 },
|
|
{ 0x1, 4 },
|
|
{ 0x2, 6 },
|
|
{ 0x3, 8 },
|
|
{ 0x4, 10 },
|
|
{ 0x5, 12 },
|
|
{ 0x6, 14 },
|
|
{ 0x7, 16 },
|
|
{ 0 }
|
|
};
|
|
|
|
static const struct clk_div_table ast2500_div_table[] = {
|
|
{ 0x0, 4 },
|
|
{ 0x1, 8 },
|
|
{ 0x2, 12 },
|
|
{ 0x3, 16 },
|
|
{ 0x4, 20 },
|
|
{ 0x5, 24 },
|
|
{ 0x6, 28 },
|
|
{ 0x7, 32 },
|
|
{ 0 }
|
|
};
|
|
|
|
static struct clk_hw *aspeed_ast2400_calc_pll(const char *name, u32 val)
|
|
{
|
|
unsigned int mult, div;
|
|
|
|
if (val & AST2400_HPLL_BYPASS_EN) {
|
|
/* Pass through mode */
|
|
mult = div = 1;
|
|
} else {
|
|
/* F = 24Mhz * (2-OD) * [(N + 2) / (D + 1)] */
|
|
u32 n = (val >> 5) & 0x3f;
|
|
u32 od = (val >> 4) & 0x1;
|
|
u32 d = val & 0xf;
|
|
|
|
mult = (2 - od) * (n + 2);
|
|
div = d + 1;
|
|
}
|
|
return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
|
|
mult, div);
|
|
};
|
|
|
|
static struct clk_hw *aspeed_ast2500_calc_pll(const char *name, u32 val)
|
|
{
|
|
unsigned int mult, div;
|
|
|
|
if (val & AST2500_HPLL_BYPASS_EN) {
|
|
/* Pass through mode */
|
|
mult = div = 1;
|
|
} else {
|
|
/* F = clkin * [(M+1) / (N+1)] / (P + 1) */
|
|
u32 p = (val >> 13) & 0x3f;
|
|
u32 m = (val >> 5) & 0xff;
|
|
u32 n = val & 0x1f;
|
|
|
|
mult = (m + 1) / (n + 1);
|
|
div = p + 1;
|
|
}
|
|
|
|
return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
|
|
mult, div);
|
|
}
|
|
|
|
struct aspeed_clk_soc_data {
|
|
const struct clk_div_table *div_table;
|
|
const struct clk_div_table *eclk_div_table;
|
|
const struct clk_div_table *mac_div_table;
|
|
struct clk_hw *(*calc_pll)(const char *name, u32 val);
|
|
};
|
|
|
|
static const struct aspeed_clk_soc_data ast2500_data = {
|
|
.div_table = ast2500_div_table,
|
|
.eclk_div_table = ast2500_eclk_div_table,
|
|
.mac_div_table = ast2500_mac_div_table,
|
|
.calc_pll = aspeed_ast2500_calc_pll,
|
|
};
|
|
|
|
static const struct aspeed_clk_soc_data ast2400_data = {
|
|
.div_table = ast2400_div_table,
|
|
.eclk_div_table = ast2400_div_table,
|
|
.mac_div_table = ast2400_div_table,
|
|
.calc_pll = aspeed_ast2400_calc_pll,
|
|
};
|
|
|
|
static int aspeed_clk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
|
|
u32 clk = BIT(gate->clock_idx);
|
|
u32 rst = BIT(gate->reset_idx);
|
|
u32 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk;
|
|
u32 reg;
|
|
|
|
/*
|
|
* If the IP is in reset, treat the clock as not enabled,
|
|
* this happens with some clocks such as the USB one when
|
|
* coming from cold reset. Without this, aspeed_clk_enable()
|
|
* will fail to lift the reset.
|
|
*/
|
|
if (gate->reset_idx >= 0) {
|
|
regmap_read(gate->map, ASPEED_RESET_CTRL, ®);
|
|
if (reg & rst)
|
|
return 0;
|
|
}
|
|
|
|
regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, ®);
|
|
|
|
return ((reg & clk) == enval) ? 1 : 0;
|
|
}
|
|
|
|
static int aspeed_clk_enable(struct clk_hw *hw)
|
|
{
|
|
struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
|
|
unsigned long flags;
|
|
u32 clk = BIT(gate->clock_idx);
|
|
u32 rst = BIT(gate->reset_idx);
|
|
u32 enval;
|
|
|
|
spin_lock_irqsave(gate->lock, flags);
|
|
|
|
if (aspeed_clk_is_enabled(hw)) {
|
|
spin_unlock_irqrestore(gate->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
if (gate->reset_idx >= 0) {
|
|
/* Put IP in reset */
|
|
regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst);
|
|
|
|
/* Delay 100us */
|
|
udelay(100);
|
|
}
|
|
|
|
/* Enable clock */
|
|
enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk;
|
|
regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, enval);
|
|
|
|
if (gate->reset_idx >= 0) {
|
|
/* A delay of 10ms is specified by the ASPEED docs */
|
|
mdelay(10);
|
|
|
|
/* Take IP out of reset */
|
|
regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, 0);
|
|
}
|
|
|
|
spin_unlock_irqrestore(gate->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void aspeed_clk_disable(struct clk_hw *hw)
|
|
{
|
|
struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
|
|
unsigned long flags;
|
|
u32 clk = BIT(gate->clock_idx);
|
|
u32 enval;
|
|
|
|
spin_lock_irqsave(gate->lock, flags);
|
|
|
|
enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? clk : 0;
|
|
regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, enval);
|
|
|
|
spin_unlock_irqrestore(gate->lock, flags);
|
|
}
|
|
|
|
static const struct clk_ops aspeed_clk_gate_ops = {
|
|
.enable = aspeed_clk_enable,
|
|
.disable = aspeed_clk_disable,
|
|
.is_enabled = aspeed_clk_is_enabled,
|
|
};
|
|
|
|
/**
|
|
* struct aspeed_reset - Aspeed reset controller
|
|
* @map: regmap to access the containing system controller
|
|
* @rcdev: reset controller device
|
|
*/
|
|
struct aspeed_reset {
|
|
struct regmap *map;
|
|
struct reset_controller_dev rcdev;
|
|
};
|
|
|
|
#define to_aspeed_reset(p) container_of((p), struct aspeed_reset, rcdev)
|
|
|
|
static const u8 aspeed_resets[] = {
|
|
/* SCU04 resets */
|
|
[ASPEED_RESET_XDMA] = 25,
|
|
[ASPEED_RESET_MCTP] = 24,
|
|
[ASPEED_RESET_ADC] = 23,
|
|
[ASPEED_RESET_JTAG_MASTER] = 22,
|
|
[ASPEED_RESET_MIC] = 18,
|
|
[ASPEED_RESET_PWM] = 9,
|
|
[ASPEED_RESET_PECI] = 10,
|
|
[ASPEED_RESET_I2C] = 2,
|
|
[ASPEED_RESET_AHB] = 1,
|
|
|
|
/*
|
|
* SCUD4 resets start at an offset to separate them from
|
|
* the SCU04 resets.
|
|
*/
|
|
[ASPEED_RESET_CRT1] = ASPEED_RESET2_OFFSET + 5,
|
|
};
|
|
|
|
static int aspeed_reset_deassert(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
struct aspeed_reset *ar = to_aspeed_reset(rcdev);
|
|
u32 reg = ASPEED_RESET_CTRL;
|
|
u32 bit = aspeed_resets[id];
|
|
|
|
if (bit >= ASPEED_RESET2_OFFSET) {
|
|
bit -= ASPEED_RESET2_OFFSET;
|
|
reg = ASPEED_RESET_CTRL2;
|
|
}
|
|
|
|
return regmap_update_bits(ar->map, reg, BIT(bit), 0);
|
|
}
|
|
|
|
static int aspeed_reset_assert(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
struct aspeed_reset *ar = to_aspeed_reset(rcdev);
|
|
u32 reg = ASPEED_RESET_CTRL;
|
|
u32 bit = aspeed_resets[id];
|
|
|
|
if (bit >= ASPEED_RESET2_OFFSET) {
|
|
bit -= ASPEED_RESET2_OFFSET;
|
|
reg = ASPEED_RESET_CTRL2;
|
|
}
|
|
|
|
return regmap_update_bits(ar->map, reg, BIT(bit), BIT(bit));
|
|
}
|
|
|
|
static int aspeed_reset_status(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
struct aspeed_reset *ar = to_aspeed_reset(rcdev);
|
|
u32 reg = ASPEED_RESET_CTRL;
|
|
u32 bit = aspeed_resets[id];
|
|
int ret, val;
|
|
|
|
if (bit >= ASPEED_RESET2_OFFSET) {
|
|
bit -= ASPEED_RESET2_OFFSET;
|
|
reg = ASPEED_RESET_CTRL2;
|
|
}
|
|
|
|
ret = regmap_read(ar->map, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !!(val & BIT(bit));
|
|
}
|
|
|
|
static const struct reset_control_ops aspeed_reset_ops = {
|
|
.assert = aspeed_reset_assert,
|
|
.deassert = aspeed_reset_deassert,
|
|
.status = aspeed_reset_status,
|
|
};
|
|
|
|
static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev,
|
|
const char *name, const char *parent_name, unsigned long flags,
|
|
struct regmap *map, u8 clock_idx, u8 reset_idx,
|
|
u8 clk_gate_flags, spinlock_t *lock)
|
|
{
|
|
struct aspeed_clk_gate *gate;
|
|
struct clk_init_data init;
|
|
struct clk_hw *hw;
|
|
int ret;
|
|
|
|
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
|
|
if (!gate)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
init.name = name;
|
|
init.ops = &aspeed_clk_gate_ops;
|
|
init.flags = flags;
|
|
init.parent_names = parent_name ? &parent_name : NULL;
|
|
init.num_parents = parent_name ? 1 : 0;
|
|
|
|
gate->map = map;
|
|
gate->clock_idx = clock_idx;
|
|
gate->reset_idx = reset_idx;
|
|
gate->flags = clk_gate_flags;
|
|
gate->lock = lock;
|
|
gate->hw.init = &init;
|
|
|
|
hw = &gate->hw;
|
|
ret = clk_hw_register(dev, hw);
|
|
if (ret) {
|
|
kfree(gate);
|
|
hw = ERR_PTR(ret);
|
|
}
|
|
|
|
return hw;
|
|
}
|
|
|
|
static int aspeed_clk_probe(struct platform_device *pdev)
|
|
{
|
|
const struct aspeed_clk_soc_data *soc_data;
|
|
struct device *dev = &pdev->dev;
|
|
struct aspeed_reset *ar;
|
|
struct regmap *map;
|
|
struct clk_hw *hw;
|
|
u32 val, rate;
|
|
int i, ret;
|
|
|
|
map = syscon_node_to_regmap(dev->of_node);
|
|
if (IS_ERR(map)) {
|
|
dev_err(dev, "no syscon regmap\n");
|
|
return PTR_ERR(map);
|
|
}
|
|
|
|
ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL);
|
|
if (!ar)
|
|
return -ENOMEM;
|
|
|
|
ar->map = map;
|
|
ar->rcdev.owner = THIS_MODULE;
|
|
ar->rcdev.nr_resets = ARRAY_SIZE(aspeed_resets);
|
|
ar->rcdev.ops = &aspeed_reset_ops;
|
|
ar->rcdev.of_node = dev->of_node;
|
|
|
|
ret = devm_reset_controller_register(dev, &ar->rcdev);
|
|
if (ret) {
|
|
dev_err(dev, "could not register reset controller\n");
|
|
return ret;
|
|
}
|
|
|
|
/* SoC generations share common layouts but have different divisors */
|
|
soc_data = of_device_get_match_data(dev);
|
|
if (!soc_data) {
|
|
dev_err(dev, "no match data for platform\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* UART clock div13 setting */
|
|
regmap_read(map, ASPEED_MISC_CTRL, &val);
|
|
if (val & UART_DIV13_EN)
|
|
rate = 24000000 / 13;
|
|
else
|
|
rate = 24000000;
|
|
/* TODO: Find the parent data for the uart clock */
|
|
hw = clk_hw_register_fixed_rate(dev, "uart", NULL, 0, rate);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_clk_data->hws[ASPEED_CLK_UART] = hw;
|
|
|
|
/*
|
|
* Memory controller (M-PLL) PLL. This clock is configured by the
|
|
* bootloader, and is exposed to Linux as a read-only clock rate.
|
|
*/
|
|
regmap_read(map, ASPEED_MPLL_PARAM, &val);
|
|
hw = soc_data->calc_pll("mpll", val);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_clk_data->hws[ASPEED_CLK_MPLL] = hw;
|
|
|
|
/* SD/SDIO clock divider (TODO: There's a gate too) */
|
|
hw = clk_hw_register_divider_table(dev, "sdio", "hpll", 0,
|
|
scu_base + ASPEED_CLK_SELECTION, 12, 3, 0,
|
|
soc_data->div_table,
|
|
&aspeed_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_clk_data->hws[ASPEED_CLK_SDIO] = hw;
|
|
|
|
/* MAC AHB bus clock divider */
|
|
hw = clk_hw_register_divider_table(dev, "mac", "hpll", 0,
|
|
scu_base + ASPEED_CLK_SELECTION, 16, 3, 0,
|
|
soc_data->mac_div_table,
|
|
&aspeed_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_clk_data->hws[ASPEED_CLK_MAC] = hw;
|
|
|
|
/* LPC Host (LHCLK) clock divider */
|
|
hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0,
|
|
scu_base + ASPEED_CLK_SELECTION, 20, 3, 0,
|
|
soc_data->div_table,
|
|
&aspeed_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_clk_data->hws[ASPEED_CLK_LHCLK] = hw;
|
|
|
|
/* P-Bus (BCLK) clock divider */
|
|
hw = clk_hw_register_divider_table(dev, "bclk", "hpll", 0,
|
|
scu_base + ASPEED_CLK_SELECTION_2, 0, 2, 0,
|
|
soc_data->div_table,
|
|
&aspeed_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_clk_data->hws[ASPEED_CLK_BCLK] = hw;
|
|
|
|
/* Fixed 24MHz clock */
|
|
hw = clk_hw_register_fixed_rate(NULL, "fixed-24m", "clkin",
|
|
0, 24000000);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_clk_data->hws[ASPEED_CLK_24M] = hw;
|
|
|
|
hw = clk_hw_register_mux(dev, "eclk-mux", eclk_parent_names,
|
|
ARRAY_SIZE(eclk_parent_names), 0,
|
|
scu_base + ASPEED_CLK_SELECTION, 2, 0x3, 0,
|
|
&aspeed_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_clk_data->hws[ASPEED_CLK_ECLK_MUX] = hw;
|
|
|
|
hw = clk_hw_register_divider_table(dev, "eclk", "eclk-mux", 0,
|
|
scu_base + ASPEED_CLK_SELECTION, 28,
|
|
3, 0, soc_data->eclk_div_table,
|
|
&aspeed_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_clk_data->hws[ASPEED_CLK_ECLK] = hw;
|
|
|
|
/*
|
|
* TODO: There are a number of clocks that not included in this driver
|
|
* as more information is required:
|
|
* D2-PLL
|
|
* D-PLL
|
|
* YCLK
|
|
* RGMII
|
|
* RMII
|
|
* UART[1..5] clock source mux
|
|
*/
|
|
|
|
for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) {
|
|
const struct aspeed_gate_data *gd = &aspeed_gates[i];
|
|
u32 gate_flags;
|
|
|
|
/* Special case: the USB port 1 clock (bit 14) is always
|
|
* working the opposite way from the other ones.
|
|
*/
|
|
gate_flags = (gd->clock_idx == 14) ? 0 : CLK_GATE_SET_TO_DISABLE;
|
|
hw = aspeed_clk_hw_register_gate(dev,
|
|
gd->name,
|
|
gd->parent_name,
|
|
gd->flags,
|
|
map,
|
|
gd->clock_idx,
|
|
gd->reset_idx,
|
|
gate_flags,
|
|
&aspeed_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_clk_data->hws[i] = hw;
|
|
}
|
|
|
|
return 0;
|
|
};
|
|
|
|
static const struct of_device_id aspeed_clk_dt_ids[] = {
|
|
{ .compatible = "aspeed,ast2400-scu", .data = &ast2400_data },
|
|
{ .compatible = "aspeed,ast2500-scu", .data = &ast2500_data },
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver aspeed_clk_driver = {
|
|
.probe = aspeed_clk_probe,
|
|
.driver = {
|
|
.name = "aspeed-clk",
|
|
.of_match_table = aspeed_clk_dt_ids,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
};
|
|
builtin_platform_driver(aspeed_clk_driver);
|
|
|
|
static void __init aspeed_ast2400_cc(struct regmap *map)
|
|
{
|
|
struct clk_hw *hw;
|
|
u32 val, div, clkin, hpll;
|
|
const u16 hpll_rates[][4] = {
|
|
{384, 360, 336, 408},
|
|
{400, 375, 350, 425},
|
|
};
|
|
int rate;
|
|
|
|
/*
|
|
* CLKIN is the crystal oscillator, 24, 48 or 25MHz selected by
|
|
* strapping
|
|
*/
|
|
regmap_read(map, ASPEED_STRAP, &val);
|
|
rate = (val >> 8) & 3;
|
|
if (val & CLKIN_25MHZ_EN) {
|
|
clkin = 25000000;
|
|
hpll = hpll_rates[1][rate];
|
|
} else if (val & AST2400_CLK_SOURCE_SEL) {
|
|
clkin = 48000000;
|
|
hpll = hpll_rates[0][rate];
|
|
} else {
|
|
clkin = 24000000;
|
|
hpll = hpll_rates[0][rate];
|
|
}
|
|
hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, clkin);
|
|
pr_debug("clkin @%u MHz\n", clkin / 1000000);
|
|
|
|
/*
|
|
* High-speed PLL clock derived from the crystal. This the CPU clock,
|
|
* and we assume that it is enabled. It can be configured through the
|
|
* HPLL_PARAM register, or set to a specified frequency by strapping.
|
|
*/
|
|
regmap_read(map, ASPEED_HPLL_PARAM, &val);
|
|
if (val & AST2400_HPLL_PROGRAMMED)
|
|
hw = aspeed_ast2400_calc_pll("hpll", val);
|
|
else
|
|
hw = clk_hw_register_fixed_rate(NULL, "hpll", "clkin", 0,
|
|
hpll * 1000000);
|
|
|
|
aspeed_clk_data->hws[ASPEED_CLK_HPLL] = hw;
|
|
|
|
/*
|
|
* Strap bits 11:10 define the CPU/AHB clock frequency ratio (aka HCLK)
|
|
* 00: Select CPU:AHB = 1:1
|
|
* 01: Select CPU:AHB = 2:1
|
|
* 10: Select CPU:AHB = 4:1
|
|
* 11: Select CPU:AHB = 3:1
|
|
*/
|
|
regmap_read(map, ASPEED_STRAP, &val);
|
|
val = (val >> 10) & 0x3;
|
|
div = val + 1;
|
|
if (div == 3)
|
|
div = 4;
|
|
else if (div == 4)
|
|
div = 3;
|
|
hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, div);
|
|
aspeed_clk_data->hws[ASPEED_CLK_AHB] = hw;
|
|
|
|
/* APB clock clock selection register SCU08 (aka PCLK) */
|
|
hw = clk_hw_register_divider_table(NULL, "apb", "hpll", 0,
|
|
scu_base + ASPEED_CLK_SELECTION, 23, 3, 0,
|
|
ast2400_div_table,
|
|
&aspeed_clk_lock);
|
|
aspeed_clk_data->hws[ASPEED_CLK_APB] = hw;
|
|
}
|
|
|
|
static void __init aspeed_ast2500_cc(struct regmap *map)
|
|
{
|
|
struct clk_hw *hw;
|
|
u32 val, freq, div;
|
|
|
|
/* CLKIN is the crystal oscillator, 24 or 25MHz selected by strapping */
|
|
regmap_read(map, ASPEED_STRAP, &val);
|
|
if (val & CLKIN_25MHZ_EN)
|
|
freq = 25000000;
|
|
else
|
|
freq = 24000000;
|
|
hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq);
|
|
pr_debug("clkin @%u MHz\n", freq / 1000000);
|
|
|
|
/*
|
|
* High-speed PLL clock derived from the crystal. This the CPU clock,
|
|
* and we assume that it is enabled
|
|
*/
|
|
regmap_read(map, ASPEED_HPLL_PARAM, &val);
|
|
aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2500_calc_pll("hpll", val);
|
|
|
|
/* Strap bits 11:9 define the AXI/AHB clock frequency ratio (aka HCLK)*/
|
|
regmap_read(map, ASPEED_STRAP, &val);
|
|
val = (val >> 9) & 0x7;
|
|
WARN(val == 0, "strapping is zero: cannot determine ahb clock");
|
|
div = 2 * (val + 1);
|
|
hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, div);
|
|
aspeed_clk_data->hws[ASPEED_CLK_AHB] = hw;
|
|
|
|
/* APB clock clock selection register SCU08 (aka PCLK) */
|
|
regmap_read(map, ASPEED_CLK_SELECTION, &val);
|
|
val = (val >> 23) & 0x7;
|
|
div = 4 * (val + 1);
|
|
hw = clk_hw_register_fixed_factor(NULL, "apb", "hpll", 0, 1, div);
|
|
aspeed_clk_data->hws[ASPEED_CLK_APB] = hw;
|
|
};
|
|
|
|
static void __init aspeed_cc_init(struct device_node *np)
|
|
{
|
|
struct regmap *map;
|
|
u32 val;
|
|
int ret;
|
|
int i;
|
|
|
|
scu_base = of_iomap(np, 0);
|
|
if (!scu_base)
|
|
return;
|
|
|
|
aspeed_clk_data = kzalloc(struct_size(aspeed_clk_data, hws,
|
|
ASPEED_NUM_CLKS),
|
|
GFP_KERNEL);
|
|
if (!aspeed_clk_data)
|
|
return;
|
|
|
|
/*
|
|
* This way all clocks fetched before the platform device probes,
|
|
* except those we assign here for early use, will be deferred.
|
|
*/
|
|
for (i = 0; i < ASPEED_NUM_CLKS; i++)
|
|
aspeed_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
|
|
|
|
map = syscon_node_to_regmap(np);
|
|
if (IS_ERR(map)) {
|
|
pr_err("no syscon regmap\n");
|
|
return;
|
|
}
|
|
/*
|
|
* We check that the regmap works on this very first access,
|
|
* but as this is an MMIO-backed regmap, subsequent regmap
|
|
* access is not going to fail and we skip error checks from
|
|
* this point.
|
|
*/
|
|
ret = regmap_read(map, ASPEED_STRAP, &val);
|
|
if (ret) {
|
|
pr_err("failed to read strapping register\n");
|
|
return;
|
|
}
|
|
|
|
if (of_device_is_compatible(np, "aspeed,ast2400-scu"))
|
|
aspeed_ast2400_cc(map);
|
|
else if (of_device_is_compatible(np, "aspeed,ast2500-scu"))
|
|
aspeed_ast2500_cc(map);
|
|
else
|
|
pr_err("unknown platform, failed to add clocks\n");
|
|
|
|
aspeed_clk_data->num = ASPEED_NUM_CLKS;
|
|
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_clk_data);
|
|
if (ret)
|
|
pr_err("failed to add DT provider: %d\n", ret);
|
|
};
|
|
CLK_OF_DECLARE_DRIVER(aspeed_cc_g5, "aspeed,ast2500-scu", aspeed_cc_init);
|
|
CLK_OF_DECLARE_DRIVER(aspeed_cc_g4, "aspeed,ast2400-scu", aspeed_cc_init);
|