linux_dsm_epyc7002/drivers/tty/serial/sh-sci.h
Paul Mundt 72b294cf76 serial: sh-sci: FIFO sizing helper consolidation.
This consolidates all of the TX/RX fill/room nonsense in to a single set
of fairly heavyweight definitions. The implementation goes in descending
order of complexity, testing the register map for capabilities until we
run out of options and do it the legacy SCI way. Masks are derived
directly from the per-port FIFO size, meaning that platforms with FIFO
sizes not matching the standard port types will still need to manually
fix them up.

This also fixes up a number of issues such as tx_empty being completely
bogus for SCI and IrDA ports, some ports using masks smaller or greater
than their FIFO size, and so forth.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14 17:38:19 +09:00

39 lines
1.6 KiB
C

#include <linux/serial_core.h>
#include <linux/io.h>
#include <linux/gpio.h>
#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
#define SCxSR_ERRORS(port) (to_sci_port(port)->cfg->error_mask)
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_ARCH_SH73A0) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3)
#else
# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
#endif
/* SCFCR */
#define SCFCR_RFRST 0x0002
#define SCFCR_TFRST 0x0004
#define SCFCR_MCE 0x0008
#define SCI_MAJOR 204
#define SCI_MINOR_START 8