linux_dsm_epyc7002/drivers/gpu/drm/tegra/dp.c
Thierry Reding db199502fa drm/tegra: dp: Read TPS3 capability from sink
The TPS3 capability can be exposed by DP 1.2 and later sinks if they
support the alternative training pattern for channel equalization.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-10-28 11:18:45 +01:00

168 lines
4.0 KiB
C

// SPDX-License-Identifier: MIT
/*
* Copyright (C) 2013-2019 NVIDIA Corporation
* Copyright (C) 2015 Rob Clark
*/
#include <drm/drm_dp_helper.h>
#include "dp.h"
static void drm_dp_link_caps_reset(struct drm_dp_link_caps *caps)
{
caps->enhanced_framing = false;
caps->tps3_supported = false;
caps->fast_training = false;
}
void drm_dp_link_caps_copy(struct drm_dp_link_caps *dest,
const struct drm_dp_link_caps *src)
{
dest->enhanced_framing = src->enhanced_framing;
dest->tps3_supported = src->tps3_supported;
dest->fast_training = src->fast_training;
}
static void drm_dp_link_reset(struct drm_dp_link *link)
{
if (!link)
return;
link->revision = 0;
link->max_rate = 0;
link->max_lanes = 0;
drm_dp_link_caps_reset(&link->caps);
link->rate = 0;
link->lanes = 0;
}
/**
* drm_dp_link_probe() - probe a DisplayPort link for capabilities
* @aux: DisplayPort AUX channel
* @link: pointer to structure in which to return link capabilities
*
* The structure filled in by this function can usually be passed directly
* into drm_dp_link_power_up() and drm_dp_link_configure() to power up and
* configure the link based on the link's capabilities.
*
* Returns 0 on success or a negative error code on failure.
*/
int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link)
{
u8 dpcd[DP_RECEIVER_CAP_SIZE];
int err;
drm_dp_link_reset(link);
err = drm_dp_dpcd_read(aux, DP_DPCD_REV, dpcd, sizeof(dpcd));
if (err < 0)
return err;
link->revision = dpcd[DP_DPCD_REV];
link->max_rate = drm_dp_max_link_rate(dpcd);
link->max_lanes = drm_dp_max_lane_count(dpcd);
link->caps.enhanced_framing = drm_dp_enhanced_frame_cap(dpcd);
link->caps.tps3_supported = drm_dp_tps3_supported(dpcd);
link->caps.fast_training = drm_dp_fast_training_cap(dpcd);
link->rate = link->max_rate;
link->lanes = link->max_lanes;
return 0;
}
/**
* drm_dp_link_power_up() - power up a DisplayPort link
* @aux: DisplayPort AUX channel
* @link: pointer to a structure containing the link configuration
*
* Returns 0 on success or a negative error code on failure.
*/
int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link)
{
u8 value;
int err;
/* DP_SET_POWER register is only available on DPCD v1.1 and later */
if (link->revision < 0x11)
return 0;
err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
if (err < 0)
return err;
value &= ~DP_SET_POWER_MASK;
value |= DP_SET_POWER_D0;
err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
if (err < 0)
return err;
/*
* According to the DP 1.1 specification, a "Sink Device must exit the
* power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink
* Control Field" (register 0x600).
*/
usleep_range(1000, 2000);
return 0;
}
/**
* drm_dp_link_power_down() - power down a DisplayPort link
* @aux: DisplayPort AUX channel
* @link: pointer to a structure containing the link configuration
*
* Returns 0 on success or a negative error code on failure.
*/
int drm_dp_link_power_down(struct drm_dp_aux *aux, struct drm_dp_link *link)
{
u8 value;
int err;
/* DP_SET_POWER register is only available on DPCD v1.1 and later */
if (link->revision < 0x11)
return 0;
err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
if (err < 0)
return err;
value &= ~DP_SET_POWER_MASK;
value |= DP_SET_POWER_D3;
err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
if (err < 0)
return err;
return 0;
}
/**
* drm_dp_link_configure() - configure a DisplayPort link
* @aux: DisplayPort AUX channel
* @link: pointer to a structure containing the link configuration
*
* Returns 0 on success or a negative error code on failure.
*/
int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link)
{
u8 values[2];
int err;
values[0] = drm_dp_link_rate_to_bw_code(link->rate);
values[1] = link->lanes;
if (link->caps.enhanced_framing)
values[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, values, sizeof(values));
if (err < 0)
return err;
return 0;
}